SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
The Plateau-to-River (P2R) model is a groundwater flow and contaminant fate and transport (F&T) simulation model used to support remedial activities conducted by the Central Plateau Cleanup Company (CPCCo) at the Hanford Site in south-central Washington State. The overall objective of the saturated zone modeling effort is to provide a basis for making informed remedial action decisions based on descriptions of current and expected future contaminant concentrations in groundwater at decision points within and downgradient of the Central Plateau of the Hanford Site. Specifically, the purpose of this environmental calculation file (ECF) is to describe a recharge sensitivity case of the CA base case. The recharge sensitivity case implements a change in the activity contribution from the vadose zone in the A Trenches Area model (for tritium [H-3] and iodine-129 [I-129]), BC Cribs and Trenches model (for I-129 and technetium-99 [Tc-99]), or the Plutonium Uranium Extraction (PUREX) Area model (for H-3 and I-129). All other simulated inventories are identical to the CA base case. The simulation of fate and transport of contaminants reported in this case will support dose predictions as part of the updated Hanford Site CA.
Capturing catalytic behaviors under operational conditions is pivotal to gaining a mechanistic understanding and promoting the design of robust catalysts. The challenge lies in the difficulty of monitoring real-time surface dynamics driven by catalyst-environment interactions. Here, in this work, we introduce a framework based on density functional calculations and kinetic modeling. This framework significantly improves the accuracy of theoretical models’ descriptions of experimental observations by quantifying environmental impacts on surface phases and active sites. CO 2 hydrogenation over Pd-based catalysts is taken as a showcase. The observed selectivity variations of Pd and Pd-M bimetallic catalysts strongly correlate with hydrogen coverage maintained under typical CO 2 hydrogenation conditions. By reducing the amount of surface hydrogen, the selectivity tuned effectively from formic acid toward CO and methanol. This study not only deepens the comprehension of dynamics of active sites under active chemical conditions but also introduces an alternative opportunity for catalytic tuning by modulating catalyst-environment interactions.
Methane C–H activation at transition-metal sites often involves electronic structures that challenge conventional single-reference electronic structure descriptions. Although Kohn–Sham density functional theory (DFT) is widely used to study catalytic trends, its reliability for reactions involving strongly correlated species remains uncertain. Here we present a systematic multireference investigation of methane activation at metal–organic framework (MOF) node catalysts across the 3d transition-metal series. We introduce an automated workflow for active space selection to enable consistent application of multireference methods, including multiconfiguration pair-density functional theory and n-electron valence state perturbation theory, to these catalytic systems. These calculations show substantial static correlation in the C–H activation reaction step and predict activation barriers that differ from DFT by 30–70 kJ mol–1, with DFT often qualitatively disagreeing in barrier height trends across transition metals. Analysis of multireference wave functions shows that reactivity is governed by the electronic structure of the M–O moiety along a continuum from metal–oxo to oxyl radical and O biradical character. Increased oxygen-centered spin density and weakened M–O bonding are identified as descriptors of catalytic activity which correlate with lower activation barriers.
Proper statistical mechanics understanding of nanoparticle solvation processes requires an accurate description of the molecular structure of the solvent. Achieving this goal with standard molecular dynamics (MD) simulation methods is challenging due to large length scales. An alternative approach to this problem can be formulated using classical density functional theory (cDFT), where a full configurational description of the positions of all the atoms is replaced by collective atomic site densities in the molecule. Using an example of the negatively charged silica-like system in an aqueous polar environment represented by a two-site water model, we demonstrate here that cDFT can reproduce MD data at a fraction of the computational cost. An important implication of this result is the ability to understand how the solvent molecular features may affect the system’s properties at the macroscopic scale. A concrete example highlighted in this work is the analysis of nanoparticle interactions with sizes of up to 100 nm in diameter.
Semilocal density functional approximations are widely used. None of them can capture the long-range van der Waals (vdW) attraction between separated subsystems, but they differ remarkably in the extent to which they capture intermediate-range vdW effects responsible for equilibrium bonds between neighboring small closed-shell subsystems. The local density approximation (LDA) often overestimates this effect, while the Perdew-Burke-Ernzerhof (PBE) generalized gradient approximation (GGA) underestimates it. The strongly constrained and appropriately normed (SCAN) meta-GGA often estimates it well. All of these semilocal functionals require an additive nonlocal correction such as the revised Vydrov-Van Voorhis 2010 (rVV10) to capture the long-range part. This work reports adsorption energies and the corresponding geometry of aromatic thiophene (C 4 H 4 S) bound to transition-metal surfaces. The adsorption process requires a genuine interplay of covalent and weak binding and requires a simultaneously accurate description of surface and adsorption energies with the correct prediction of the adsorption site. All these quantities must come from well-balanced short- and long-range correlation effects for a universally applicable method for weak interactions with chemical accuracy. Here, our methods indicate that the correct interplay is not present in any combination of recent meta-GGA's and rVV10. The simple short-range damping of the vdW correction scheme that is practically successful in the combination of GGA's and vdW approximations is less transferable in SCAN+rVV10 or in the revised version, revSCAN+rVV10. In addition, we present accurate random-phase-approximation-quality adsorption energies from a model based on the one of Zaremba and Kohn.
General petrographic description of a large regolith specimen collected at the Taurus-Littrow landing site of Apollo 17. The specimen consists of a large clast of olivine micronorite hornfels with well-devepoled porphyroblastic texture, surrounded by highly vesicular olivine micronorite hornfels with incipient development of the porphyroblastic textures. Pink spinels with radial anorthite rims occur in both the clast and the surrounding matrix.
The Scout Launch Vehicle Program to utilize solid propellant rockets by the DOD and to provide a reliable, low cost vehicle for scientific and applications aircraft is discussed. The program's history is reviewed and a vehicle description is given. The Vandenberg Air Force Base and the San Marco launch sites are described, and capabilities such as payload weight, orbital inclinations, payload volume and mission integration time spans are discussed. Current and future plans for improvement, including larger heat shields and individual rocket motors are also reviewed.
Ductile failure through the growth and coalescence of voids is of particular relevance for many engineering materials. Yet, the lack of experimental measurements of the mechanical state of the material at an appropriate length scale has limited further understanding of the regime of ductile failure. In this study, local grain-scale experimental measurements are used to determine their relevance for describing and predicting ductile failure. Additive manufactured materials, due to the presence of inherent porosity, as well as the ability to tailor internal porosity, provides a promising avenue to study ductile failure. Selective laser melting is used to manufacture a specially designed specimen with two large, internal voids, in addition to the natural porosity, which is characteristic to the production process. The initial porosity and its evolution upon tensile loading are characterized via micro tomography. Several locations of void coalescence are captured in the sample, revealing activity of multiple modes of failure. Finite element simulations, with a simplified J2 plasticity model, instantiated with the initial void structure, is deployed, in which geometric localizations of stress concentration corresponded with experimentally observed sites of coalescence but was inadequate in capturing the appropriate failure mechanism. Furthermore, from the experimental results of the far-field high-energy diffraction microscopy, the heterogeneous micromechanical state is identified and tracked around voids due to the local grain interactions. These experiments determine narrow bands of low stress triaxiality, at the onset of failure, which highlight the path of coalescence through intervoid shearing. Diffraction spot spreading analysis aided characterization of intragranular plasticity and strain heterogeneity, which can be coupled with high triaxiality to form the conditions inducive for coalescence through intervoid necking. In this study, the experimentally determined grain-scale description of the micromechanical state provides a physical basis that can accurately capture both the sites and the mechanism of void coalescence at the onset of ductile failure.
We have isolated a chlorophyll-d-containing cyanobacterium from the intertidal field site at Moss Beach, on the coast of Central California, USA, where Manning and Strain (1943) originally discovered this far-red chlorophyll. Here, we present the cyanobacterium’s environmental description, culturing procedure, pigment composition, ultrastructure, and full genome sequence. Among cultures of far-red cyanobacteria obtained from red algae from the same site, this strain was an epiphyte on a brown macroalgae. Its Q y in vivo absorbance peak is centered at 704–705 nm, the shortest wavelength observed thus far among the various known Acaryochloris strains. Its Chl a /Chl d ratio was 0.01, with Chl d accounting for 99% of the total Chl d and Chl a mass. TEM imagery indicates the absence of phycobilisomes, corroborated by both pigment spectra and genome analysis. The Moss Beach strain codes for only a single set of genes for producing allophycocyanin. Genomic sequencing yielded a 7.25 Mbp circular chromosome and 10 circular plasmids ranging from 16 kbp to 394 kbp. We have determined that this strain shares high similarity with strain S15, an epiphyte of red algae, while its distinct gene complement and ecological niche suggest that this strain could be the closest known relative to the original Chl d source of Manning and Strain (1943). The Moss Beach strain is designated Acaryochloris sp. (marina) strain Moss Beach.
In mineral exploration, the ability to distinguish and map petrochemical variations of magmatic rocks can be a useful reconnaissance tool. Alkalinity is one such petrochemical parameter and is used in the characterization of granitoid rocks. In quartz normative plutonic rocks, alkalinity is related to the composition and abundance of feldspars. Together with quartz abundance, knowledge of feldspar modes allows the classification of these igneous rocks according to the Streckeisen diagram. Alternative classification schemes rely on whole rock geochemistry instead of mineral identifications. The relative ease of obtaining whole rock analyses means that geochemical classifications tend to be favored in exploration geology. But the technique of thermal infrared spectroscopy of rocks yields information on mineralogy and is one that can be applied remotely. The goal of the current work then is to establish whether data from TIMS can be used to distinguish the mineralogical variations that relate to alkalinity. An ideal opportunity to test this thesis arises from the work presented in a paper by Dewitt (1989). This paper contains the results of mapping and analysis of Proterozoic plutonic rocks in north-central Arizona. The map resulting from this work delineates plutons according to alkalinity in an effort to establish a trend or polarity in the regional magmatism. Also contained within this paper are brief descriptions of the mineralogy of half of the region's plutons. This combination of mineralogical and geochemical information was the rationale behind choosing this area as a site for TIMS over flights. A portion of the region centered on the northern Bradshaw Mountains was selected because it contains plutons of all three alkalinity classifications (alkali-calcic, calc-alkalic, and calic) present on DeWitt's map within a relatively small area. The site was flown in August of 1994 and the data received a few days before the writing of this manuscript. Most of this paper is devoted to the description of laboratory based spectroscopy and spectral simulations. These are required to gain insight into the correct procedures for enhancing the relatively small differences in the low spectral resolution TIMS data.
In accordance with the Code of Federal Regulations, Title 40, Part 403.12(e), Lawrence Livermore National Laboratory (LLNL) submits a semiannual monitoring report regarding federally regulated wastewater generating processes (categorical processes) that discharge wastewater to the sanitary sewer system. Attachments A-2 and A-3 of the 2019-2020 Wastewater Discharge Permit #1250 granted to LLNL by the City of Livermore Water Resources Division (WRD) also mandate submission of this report. The LLNL Livermore Site is required to monitor identified electrical and electronic components processes (40 CFR Part 469) and metal finishing processes (40 CFR Part 433) semiannually and to submit monitoring reports in January and July of each year. Under authority delegated to enforce compliance with these regulations, the WRD reviews this report. This report provides information on the significant metal-finishing operations and electrical and electronic component operations located at the Livermore Site during the period from December 1, 2019 through May 31, 2020 and includes descriptions of the LLNL regulated (categorical) processes that discharge to the sanitary sewer. Attachments A-2 and A-3 of the 2019-2020 Wastewater Discharge Permit #1250 provide the list of categorical processes and the required self-monitoring program for point-source discharges at LLNL. The monitoring data collected for this report documents compliance with all federal and local pretreatment limits. Compliance certification accompanies this report, as required by federal regulations.
The 7 by 10 foot high speed tunnel performs a wide range of tests employing a variety of model installation methods. To support the reduction of static data from this facility, a generalized wind tunnel data reduction program had been developed for use on the Langley central computer complex. The capabilities of a version of this generalized program adapted for real time use on a dedicated on-site computer are discussed. The input specifications, instructions for the console operator, and full descriptions of the algorithms are included.
As NASA transitions its focus to travel back to the moon and on to new destinations, the need to ensure the capture, analysis, and application of research and medical data is of greater urgency than at any other previous time. In this era of limited resources and challenging schedules, the Human Research Program (HRP), based at NASA’s Johnson Space Center (JSC), recognizes the need to extract the greatest possible amount of information from the data already captured. To this end, the HRP Chief Scientist Office (CSO), HRP Program Planning and Control (PP&C) Office, and the Space Medicine Operations Division have been working together to make reuse of both research data and medical monitoring data more accessible to the user community through the Life Science Data Archive (LSDA) and the Lifetime Surveillance of Astronaut Health (LSAH) Repositories. The task of both LSDA and LSAH repositories is to acquire, preserve, and distribute retrospective research (LSDA) and medical (LSAH) data and information both within the NASA community and to the science community at large, for knowledge discovery, retrospective analysis, and planning of future research studies. An additional goal is to encourage collaboration with non-NASA institutions also faced with enhancing human performance in extreme environments. In September 2022, the LSDA website and its contents transitioned to a new NASA Life Sciences Portal (https://nlsp.nasa.gov/explore/lsdahome). This site continues to feature publicly releasable information such as non-attributable datasets, experiment descriptions (from Project Mercury to ISS, as well as from multiple flight analog missions), descriptions of medical monitoring data, and LSAH newsletters (1992 - 2022). The website also provides an updated portal to request additional research and medical data not accessible from the public website. This presentation will provide an in-depth look at the new system as it relates to finding and requesting retrospective data. We will also detail processes from making a request to delivering data for different types of data requests (i.e., attributable, or non-attributable). This includes descriptions of various approval boards, what information and actions the requestor is responsible for, and key milestones in making data available for reuse.
The single-site Langmuir adsorption model, also known as the Langmuir isotherm equation, is one of the simplest possible descriptions of adsorption phenomena, and yet finds widespread applicability across a range of disciplines. In its simplest form, it is deployed to treat adsorption equilibria at constant temperature (i.e., along isotherms); however, at the heart of its derivation is a more general class of models that each incorporate an explicit temperature dependence, subject to assumptions about the spatial/translational degrees of freedom of the adsorbed species. In this work, measurements of the temperature dependence of supercritical adsorption of H 2 on a single-site metal-organic framework (MOF) are presented, and fitted using a range of Langmuir models with distinct treatments of degrees of freedom in the adsorbed phase. Surprisingly, all of the models can be used to adequately represent the measured data, despite yielding significantly different values for binding energy and the temperature dependence of the isosteric enthalpy of adsorption (i.e., the isosteric heat, qst). Furthermore, a critical finding is that the mean-temperature isosteric enthalpy of adsorption remains consistent across all models within experimental error, highlighting its reliability for evaluating adsorption thermodynamics.
Catalysis science is founded on understanding the structure, number, and reactivity of active sites. Kinetic models that consider active sites to be static and noninteracting entities are routinely successful in describing the behavior of heterogeneous catalysts. Yet, active site ensembles often restructure in response to their external environment and even during steady-state catalytic turnover, sometimes requiring non-mean-field kinetic treatments to describe distance-dependent interactions among sites. Such behavior is being recognized more frequently in modern catalysis research, with the advent of experimental methods to quantify turnover rates with increasing precision, an expanding arsenal of operando characterization tools, and computational descriptions of atomic structure and motion at chemical potentials and timescales increasingly relevant to reaction conditions. This review focuses on dynamic changes to metal active site ensembles on zeolite supports, which are silica-based crystalline materials substituted with Al that generate binding sites for isolated and low-nuclearity metal site ensembles. Metal sites can become solvated and mobilized during reaction, facilitating interactions among sites that change their nuclearity and function. Such intersite communication can be regulated by the zeolite support, resulting in non-single-site and potentially non-mean-field kinetic behavior arising from mechanisms of catalytic action that combine elements of those canonically associated with homogeneous and heterogeneous catalysis. Here, we discuss recent literature examples that document dynamic active site behavior in metal-zeolites and outline methodologies to identify and interpret such behavior. We conclude with our outlook on future research directions to develop this evolving branch of catalysis science and harness it for practical applications.
The intended use of this dataset is to serve as an observational benchmark to evaluate model predictions of NPP, ANPP, litter fluxes, and recruitment at Barro Colorado Island, Panama. This dataset contains four CSV files and one text file. “Benchmarks-NPP-ANPP-R-L.csv” provides estimates of annual ecosystem-level reproductive litter flux (R), leaf litter flux (L), aboveground net primary productivity (ANPP), and net primary productivity (NPP) for 61 field plots throughout tropical, temperate, and boreal forest biomes. An additional 499 plots (n = 550) include estimates of just R, L, and R/L. Each row reports a distinct set of estimates for one sampling interval at one plot. “Metadata-Benchmarks-NPP-ANPP-R-L.csv” contains field descriptions for all data fields in “Benchmarks-NPP-ANPP-R-L.csv”. “References-Benchmarks-NPP-ANPP-R-L.txt” contains full references to the original studies used to produce the observations at each plot included in the data. “Benchmarks-Recruitment.csv” provides estimates of species-level recruitment rates into the 1 cm dbh size class at four CTFS-ForestGeo sites using methods that account for unobserved mortality of new recruits between census intervals (Kohyama et al., 2018). “Metadata-Benchmarks-Recruitment.csv” contains field descriptions for all data fields in “Benchmarks-Recruitment.csv”.
Normal and Pressure-shear plate impact (NPI and PSPI) experiments are popular experimental techniques for studying the mean-field macroscopic behavior of polycrystalline metals under high-rate dynamic loading. However, since both configurations rely upon geometry for subjecting the specimen to high strain rates, these experiments often involve a limited specimen size. Moreover, because of the inherent heterogeneities present within polycrystalline metals, it is difficult to ascertain if the size of the specimen and/or regions where measurements are made are sufficiently large for making representative inferences about the mean-field macroscopic properties from single-point velocity measurements. In the present study, we quantify the expected measurement variability on observable point measurements in NPI and PSPI experiments by carrying out direct numerical simulations (DNS) of statistically representative polycrystalline microstructures subjected to dynamic compression and compression-shear loading. In particular, we consider the role of specific material heterogeneities (e.g. the grain-to-grain difference in size, crystallographic orientation) on dispersion in the normal and transverse particle velocity records and on local fluctuations in key state variables (e.g. velocity, accumulated plastic strain) by incorporating these effects directly into a representative synthetic microstructure geometry and crystalline description of pure polycrystalline aluminum. The form of the present study is a large parametric investigation, consisting of ten ensembles of one hundred simulations. Each of the thousand simulations reflects a randomly realized synthetic microstructure in one of five cases of decreasing average grain size for the two loading configurations. Our analysis of the DNS results demonstrates that for both of these experimental configurations, the grain size directly correlates with the coefficient of variation (CV) in simulated point measurements, showing a convergent decrease in CV to zero (i.e. particle velocity record approaches the mean-field value) with decreasing grain size. Remarkably, the magnitude of variations in the particle velocity record is shown to be largest where the deviatoric stresses are most significant. In the case of NPI, this occurs at the elastic and plastic wavefront, whereas, in the case of PSPI, the magnitude of fluctuations are approximately constant throughout the experimental window time. The reasoning for the scatter in particle velocity due to the heterogeneous microstructure is demonstrated to be dependent on the mechanisms for accommodating deformation and on the interaction of reflection waves generated at sites of heterogeneities occurring at the scale of grains. Lastly, we develop a power-law description for the magnitude of scattering versus characteristic length, which provides a statistical framework for assessing the required number of grains per characteristic specimen dimension for minimizing scatter within these two experimental configurations (NPI, PSPI).