Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sim”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

A Comprehensive Evaluation of the Performance and Materials Chemistry of a Sililcone-Based Replicating Compound

The objective of this project was to characterize the performance and chemistry of a siliconebased replicating compound. Some silicone replicating compounds are useful for critical inspection of surface features. Common applications are for examining micro-cracks, surface pitting, scratching, and other surface defects. Materials characterization techniques were used: FTIR, XPS, ToF-SIMS, AFM, and Confocal Microscopy to evaluate the replicating compound. These techniques allowed for the characterization and verification of the resolution capabilities and surface contamination that may be a result of using the compound. FTIR showed the compound is entirely made from silicone constituents. The AFM and Confocal Microscopy results showed the compound does accurately replicate the surface features to the claimed resolution. XPS and ToF-SIMS showed there is a silicone contaminant layer left behind when a cured replica is peeled off a surface. Attempts to clean off the contamination could not completely remove all silicone residues.

36 MATERIALS SCIENCE↗

Multiphysics Application Coupling Toolkit

This particular consortium implementation of the software integration infrastructure will, in large part, refactor portions of the Rocstar multiphysics infrastructure. Development of this infrastructure originated at the University of Illinois DOE ASCI Center for Simulation of Advanced Rockets (CSAR) to support the center's massively parallel multiphysics simulation application, Rocstar, and has continued at IllinoisRocstar, a small company formed near the end of the University-based program. IllinoisRocstar is now licensing these new developments as free, open source, in hopes to help improve their own and others' access to infrastructure which can be readily utilized in developing coupled or composite software systems; with particular attention to more rapid production and utilization of multiphysics applications in the HPC environment. There are two major pieces to the consortium implementation, the Application Component Toolkit (ACT), and the Multiphysics Application Coupling Toolkit (MPACT). The current development focus is the ACT, which is (will be) the substrate for MPACT. The ACT itself is built up from the components described in the technical approach. In particular, the ACT has the following major components: 1.The Component Object Manager (COM): The COM package provides encapsulation of user applications, and their data. COM also provides the inter-component function call mechanism. 2.The System Integration Manager (SIM): The SIM package provides constructs and mechanisms for orchestrating composite systems of multiply integrated pieces.

Campbell, Michael T.↗

Vehicle-to-grid Simulator

Vehicle-to-grid Simulation Platform (V2G-Sim) -- A recent activity at LBNL has begun to create a simulation platform to generate temporarily--and spatially--resolved predictions of grid impacts and opportunities from increased plug-in vehicle (PEV) deployment. Currently in the prototype stage, the V2G-Sim models for: a) driver behavior, b) automated generation of trip specific drive cycles (velocity-time profiles), c) vehicle powertrain models of energy usage during a trip, d) vehicle charging, and e) vehicle response to managed charging algorithms.

Saxena, Samveg↗

Controlling T c of Iridium films using interfacial proximity effects

High precision calorimetry using superconducting transition edge sensors requires the use of superconducting films with a suitable T c , depending on the application. To advance high-precision macrocalorimetry, we require low-T c films that are easy to fabricate. A simple and effective way to suppress T c of superconducting Iridium through the proximity effect is demonstrated by using Ir/Pt bilayers as well as Au/Ir/Au trilayers. While Ir/Au films fabricated by applying heat to the substrate during Ir deposition have been used in the past for superconducting sensors, we present results of T c suppression on Iridium by deposition at room temperature in Au/Ir/Au trilayers and Ir/Pt bilayers in the range of $\sim$20-100~mK. Measurements of the relative impedance between the Ir/Pt bilayers and Au/Ir/Au trilayers fabricated show factor of $\sim$10 higher values in the Ir/Pt case. These new films could play a key role in the development of scalable superconducting transition edge sensors that require low-T c films to minimize heat capacity and maximize energy resolution, while keeping high-yield fabrication methods.

Hennings-Yeomans, R↗

Insight into bulk niobium superconducting RF cavities performances by tunneling spectroscopy

Point contact tunneling (PCT) spectroscopy measurements are reported over wide areas of cm-sized cut outs from niobium superconducting RF cavities. A comparison is made between a high-quality, conventionally processed (CP) cavity with a high field Q drop for acceleration field E $>$ 20 MV/m and a nitrogen doped (N-doped) cavity that exhibits an increasing Q up to fields approaching 15 MV/m. The CP cavity displays hot spot regions at high RF fields where Q-drop occurs as well as unaffected regions (cold spots). PCT data on cold spots reveals a near ideal BCS density of states (DOS) with gap parameters, $\Delta$ as high as 1.62 meV, that are among the highest values ever reported for Nb. Hot spot regions exhibit a wide distribution of gap values down to $\Delta \sim$ 1.0 meV and DOS broadening characterized by a relatively large value of pair-breaking rate, $\Gamma$, indicating surface regions of significantly reduced superconductivity. In addition, hot spots commonly exhibit Kondo tunneling peaks indicative of surface magnetic moments attributed to a defective oxide. N-doped cavities reveal a more homoegeneous gap distribution centered at $\Delta \sim$ 1.5 meV and relatively small values of $\Gamma/\Delta$. The absence of regions of significantly reduced superconductivity indicates that the N interstitials are playing an important role in preventing the formation of hydride phases and other macroscopic defects which might otherwise severely affect the local, surface superconductivity that lead to hot spot formation. The N-doped cavities also display a significantly improved surface oxide, i.e., increased thickness and tunnel barrier height, compared to CP cavities. These results help explain the improved performance of N-doped cavities and give insights into the origin of the initial increasing Q with RF amplitude.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Long-Lived Particles at the Energy Frontier: The MATHUSLA Physics Case

We examine the theoretical motivations for long-lived particle (LLP) signals at the LHC in a comprehensive survey of Standard Model (SM) extensions. LLPs are a common prediction of a wide range of theories that address unsolved fundamental mysteries such as naturalness, dark matter, baryogenesis and neutrino masses, and represent a natural and generic possibility for physics beyond the SM (BSM). In most cases the LLP lifetime can be treated as a free parameter from the $\mu$m scale up to the Big Bang Nucleosynthesis limit of $\sim 10^7$m. Neutral LLPs with lifetimes above $\sim$ 100m are particularly difficult to probe, as the sensitivity of the LHC main detectors is limited by challenging backgrounds, triggers, and small acceptances. MATHUSLA is a proposal for a minimally instrumented, large-volume surface detector near ATLAS or CMS. It would search for neutral LLPs produced in HL-LHC collisions by reconstructing displaced vertices (DVs) in a low-background environment, extending the sensitivity of the main detectors by orders of magnitude in the long-lifetime regime. In this white paper we study the LLP physics opportunities afforded by a MATHUSLA-like detector at the HL-LHC. We develop a model-independent approach to describe the sensitivity of MATHUSLA to BSM LLP signals, and compare it to DV and missing energy searches at ATLAS or CMS. We then explore the BSM motivations for LLPs in considerable detail, presenting a large number of new sensitivity studies. While our discussion is especially oriented towards the long-lifetime regime at MATHUSLA, this survey underlines the importance of a varied LLP search program at the LHC in general. By synthesizing these results into a general discussion of the top-down and bottom-up motivations for LLP searches, it is our aim to demonstrate the exceptional strength and breadth of the physics case for the construction of the MATHUSLA detector.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

X-Ray Properties of SPT Selected Galaxy Clusters at 0.2<z<1.5 Observed with XMM-Newton

We present measurements of the X-ray observables of the intra-cluster medium (ICM), including luminosity $L_X$, ICM mass $M_{ICM}$, emission-weighted mean temperature $T_X$, and integrated pressure $Y_X$, that are derived from XMM-Newton X-ray observations of a Sunyaev-Zel'dovich Effect (SZE) selected sample of 59 galaxy clusters from the South Pole Telescope SPT-SZ survey that span the redshift range $0.20 < z < 1.5$. We constrain the best-fit power law scaling relations between X-ray observables, redshift, and halo mass. The halo masses are estimated based on previously published SZE observable to mass scaling relations, calibrated using information that includes the halo mass function. Employing SZE-based masses in this sample enables us to constrain these scaling relations for massive galaxy clusters ($M_{500}\geq 3 \times10^{14}$ $M_\odot$) to the highest redshifts where these clusters exist without concern for X-ray selection biases. We find that the mass trends are steeper than self-similarity in all cases, and with $\geq 2.5{\sigma}$ significance in the case of $L_X$ and $M_{ICM}$. The redshift trends are consistent with the self-similar expectation in all cases, but the uncertainties remain large. Core-included scaling relations tend to have steeper mass trends for $L_X$. There is no convincing evidence for a redshift-dependent mass trend in any observable. The log-normal intrinsic scatter in the observable at fixed halo mass varies from $\sim$0.10 for $M_{ICM}$ and core-excised $Y_X$ to $\sim$0.27 for core-included bolometric $L_X$. The constraints on the amplitudes of the fitted scaling relations are currently limited by the systematic uncertainties on the SZE-based halo masses, but the redshift and mass trends are limited by the X-ray sample size and the measurement uncertainties of the X-ray observables (abridged).

79 ASTRONOMY AND ASTROPHYSICS↗

Numerical Model Development and Validation for the WECCOMP Control Competition: Preprint

This paper details the development and validation of a numerical model of the Wavestar wave energy converter (WEC) in WEC-Sim. This numerical model was developed in support of the WEC Control Competition (WECCCOMP), an open competition with the objective of maximizing WEC power production through innovative control strategies. WECCCOMP has two stages: numerical implementation of control strategies, and experimental implementation. The work presented in this paper is for support of the stage one numerical implementation, where contestants are provided a WEC-Sim model of the Wavestar device to develop their control algorithms.

16 TIDAL AND WAVE POWER↗

Large mass-dependent nickel isotope fractionation in Orgueil carbonate: implications for 60 Fe in the early Solar System

Iron-60 is a uniquely important short-lived radionuclide, because it cannot be produced by particle irradiation, and thus, high initial 60 Fe abundances inferred in early-formed Solar System objects must be attributed to injection from a stellar source. Estimates of the initial 60 Fe/ 56 Fe ratio range over a factor of 60 from 1×10 –8 , as determined by high-precision analyses of bulk meteorites, to ~6×10 –7 , from in-situ measurements of high Fe/Ni phases. The reasons for this discrepancy are not clear. To investigate this, we used the UCLA ims1270 and ims1290 ion microprobes to analyze Orgueil carbonate grains that exhibit very high Fe/Ni ratios and are known from 53 Mn- 53 Cr systematics to have formed within ~5 My of CAIs. Our SIMS investigations found two Orgueil breunnerite grains that show apparent 60 Ni excesses. Correlations with Fe/Ni are generally not well defined, but the data imply a relatively high 60 Fe/ 56 Fe ratio of ~10 –7 at the time of carbonate formation. To test the accuracy of the SIMS nickel isotope measurements, we analyzed the same carbonate grains with RIMS using CHILI, the CHicago Instrument for Laser Ionization. The data obtained on the Orgueil carbonates reveal correlations between 62 Ni/ 58 Ni and 60 Ni/ 58 Ni that are strictly mass-dependent. The range in mass fractionation is very large, up to ~35‰/u, predominantly favoring the light isotopes. Our RIMS measurements conclusively demonstrate the occurrence of mass-fractionated nickel in meteorite samples. This isotopic fractionation is large enough that elevated 60 Ni/ 62 Ni ratios could be incorrectly attributed to 60 Fe decay if this mass fractionation is not accurately accounted for.

58 GEOSCIENCES↗

Extreme Load Computational Fluid Dynamics Analysis and Verification for a Multibody Wave Energy Converter: Preprint

A wave energy converter (WEC) must be designed to survive the extreme sea states that it will be subject to throughout its lifetime. Although there are many analysis methods and codes available to accomplish this, there are currently several engineering challenges to WEC survival design. Foremost, the computational design approach will typically involve a trade-off between accuracy and computational efficiency. Additionally, most computational fluid dynamics (CFD) codes are not ideally suited to modeling extreme events for WECs with multibody dynamics, power-take-off systems, and mooring systems. Finally, although WEC design standards and CFD guidelines are emerging, with the current immaturity of the WEC industry, they are not yet well established. In this study, loads on a 1:35-scale, moored, multibody WEC are evaluated with CFD. The CFD results are compared with results obtained from a computationally efficient, midfidelity model based on linearized potential flow hydrodynamics. For these model verification comparisons, both operational and survival configurations are considered. The extreme load results obtained, using both codes, indicate that the survival configuration successfully sheds loads during extreme sea states. It is also found that WEC-Sim, when appropriately applied, can provide reasonable load results, at a fraction of the computational expense of CFD. However, for the more extreme sea states, and for higher-order effects not included in the WEC-Sim model, the linear-based results have significant errors in comparison to the CFD-based results, and should be used judiciously.

16 TIDAL AND WAVE POWER↗

Using Low Energy Atmospheric Neutrinos for Precision Measurement of the Mixing Parameters

Use of low energy atmospheric neutrinos is considered for precision measurement of neutrino mixing parameters. At around energy $E \simeq$ a few $\times$100 MeV and baseline $L$ of a few $\times$1000 km, CP phase effect is $\sim$10 times larger than that of the conventional LBL accelerator neutrino experiments. We report here a few progresses: (1) To analyze physics in the region, a new perturbative framework at around the solar-scale enhancement is developed. (2) To know the characteristic features of CP $\delta$ dependence of the atmospheric neutrinos at low energies, we plot the ratio of the $\nu_{e}$ and $\bar{\nu}_{e}$ fluxes $F(\delta)/F(\delta=0)$ for $\delta=\pm \frac{\pi}{2}$ and $\pi$ as a function of $E$ using the Honda {\it et al.} flux. Interestingly, it shows $\delta$ dependence of $\simeq$5-10\% level, with positive (negative) sign for $\nu_{e}$ ($\bar{\nu}_{e}$). (3) To reduce the flux systematic errors, measurement of muon energy distribution around $\sim$1 GeV at high altitude may be useful. Water Cherenkov or muon range detectors may be the options with advantage in the latter if it is magnetized in view of the $\delta$ dependence of the flux.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Production of Particle Reference and Quality Control Materials

Maintaining the superior performance of new analytical instrumentation and pushing the boundaries of ever-smaller particle analysis by methods such as secondary ion mass spectrometry (SIMS) has become limited by the availability of certified particle standards for calibration, quality control, and validation. To meet this growing demand for a reliable and universal approach to the generation of uranium particle reference material, the Pacific Northwest National Laboratory (PNNL) and Savannah River National Laboratory (SRNL) are collaborating on a joint venture that establishes a number of chemical pathways to the fabrication, purification, and stabilization of uranium particle material to within a fixed particle size range, and well-characterized isotopics. PNNL particle standards are designed and tailored to meet the criteria essential to the calibration and benchmarking of instruments used in both the non-destructive and destructive assay of particulate material, typically collected from environmental swipe sampling. Previous testing and optimization of this colloidal approach to particulate material has centred on tight size distributions, singular composition and density, uniform morphology, and tailored isotopic abundances. Extensive validation of this material has since been performed, both at the National Institute of Standards and Technology (NIST) and the International Atomic Energy Agency (IAEA), demonstrating its suitability for quality control needs of large geometry (LG)-SIMS analysis. Building on this momentum, the production of low-enriched uranium particle reference material, with specially tailored isotopics, has moved from development to full operation. Herein, various aspects of the production cycle will be discussed, including detailed accounts of the technical methodologies being employed, as well as insights into the sample characterization and acceptance testing requirements.

Nuclear Safeguards, Particle Standards, IAEA↗

The Sensitivity of Future Gamma-Ray Telescopes to Primordial Black Holes

The strongest existing constraints on primordial black holes with masses in the range of $m_{\rm BH} \sim 10^{15}-10^{17} \, {\rm g}$ have been derived from measurements of the local cosmic-ray electron-positron flux by Voyager 1, and MeV-scale gamma-ray observations of the Inner Galaxy by COMPTEL and INTEGRAL. In this paper, we evaluate the sensitivity of future MeV-scale gamma-ray telescopes such as e-ASTROGAM or AMEGO to Hawking radiation. We show that such an instrument would be able to provide the strongest constraints on black holes in the mass range of $m_{\rm BH} \sim (0.6-20) \times 10^{16} \, {\rm g}$, typically exceeding current constraints by approximately two orders of magnitude. In scenarios in which the observed 511 keV excess is the result of Hawking radiation, we find that e-ASTROGAM or AMEGO would not only be able to detect the Hawking radiation from the Inner Galaxy, but could precisely measure the abundance and mass distribution of the black holes responsible for this signal.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Cosmological Magnetic Fields from Primordial Kerr-Newman Black Holes

The origin of our universe's cosmological magnetic fields remains a mystery. In this study, we consider whether these magnetic fields could have been generated in the early universe by a population of charged, spinning primordial black holes. To this end, we calculate the strength of the magnetic fields generated by this population, and describe their evolution up to the current epoch. We find that extremal black holes in the mass range $ M \sim 10^{28} -10^{36} \, {\rm g}$ could potentially produce magnetic fields with present day values as large as $B \sim 10^{-20} - 10^{-15} \, {\rm G}$. While we remain largely agnostic as to the origin of these spinning, charged black holes, we do briefly discuss how new physics may have induced a chemical potential which could have briefly maintained the black holes in an electrically charged state in the early universe.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Towards a neutron multiplicity measurement with the Accelerator Neutrino Neutron Interaction Experiment

The Accelerator Neutrino Neutron Interaction Experiment (ANNIE) is a 26 ton Gadolinium (Gd)-loaded water Cherenkov detector located on the Booster Neutrino Beam line at Fermilab. Its main goals are the measurement of the neutron multiplicity in neutrino-nucleus interactions as well as the cross-section of Charged Current Quasi-Elastic (CCQE) neutrino interactions on water. Besides the physics goals, the experiment also aims to be a testbed for new technologies such as Large Area Picosecond Photodetectors (LAPPDs) and Water-based Liquid Scintillators (WbLS). This thesis presents a preliminary measurement of the neutron multiplicity with {ANNIE}, using an analysis conducted on a fraction of the 2021 beam year. As preparatory measures, the efficiency of ANNIE's Front Muon Veto (FMV) was determined to be {$\bar{\varepsilon}_{\mathrm{FMV}} = (95.6 \pm 1.6)\%$} while the average efficiency for active scintillator paddles in the Muon Range Detector (MRD) was found to be {$\bar{\varepsilon}_ {\mathrm{MRD}} = (92.1 \pm 7.9)\%$}. Furthermore, the simulation framework used for ANNIE was validated and adapted to reproduce the experimental data by comparing the detector response for samples of Michel electrons, Americium Beryllium neutrons, and through-going muons. The analysis finds average neutron yields of {$\bar{n}_{\mathrm{data}} (\mathrm{beam}) = (0.272 \pm 0.010_{\mathrm{stat}})$} for an inclusive set of all identified muon neutrino candidates and {$\bar{n}_{\mathrm{data}} (\mathrm{beam,FV}) = (0.287 \pm 0.044_{\mathrm{stat}})$ for interactions which happened inside of the Fiducial Volume of ANNIE, which was optimized to increase the neutron detection acceptance. The presented neutron multiplicity values represent the number of detected neutrons after all event selection cuts and are not yet corrected for the neutron detection efficiency. An equivalent analysis on a simulated beam sample predicts neutron yields of $\bar{n}_{\mathrm{MC}}(\mathrm{beam}) = (0.515 \pm 0.0 07_{\mathrm{stat}})$ and $\bar{n}_{\mathrm{MC}}(\mathrm{beam,FV}) = (0.627 \pm 0.031_{\mathrm{stat}})$, indicating that the models tend to overpredict the number of neutrons produced in such interactions. Systematic errors have been briefly considered to contribute {$\sigma_{\mathrm{sys,FMV}} \sim 0.01\,$neutrons/$\nu$-interaction} due to the slight FMV inefficiency and {$\sigma_{\mathrm{sys,n}} \sim 0.05\,$neutrons/$\nu$-interaction} due to the neutron detection efficiency. Simulation studies further highlighted the importance of neutron detection in Diffuse Supernova Background (DSNB) searches. A combination of neutron tagging and Convolutional Neural Networks was found to reduce the most relevant Neutral Current Quasi-Elastic (NCQE) interaction background below the signal level, achieving a Signal-to-Background ratio of 4:1. In a further study, we investigated the positive impact of a deployment of a WbLS target on the energy reconstruction in ANNIE. WbLS provides a scintillation signal from hadronic recoils in addition to the charged lepton that can be included in neutrino energy reconstruction. It was found that a deployed WbLS volume in ANNIE improves the neutrino energy reconstruction from 14\% to 12\%, with the potential of going beyond this if more sophisticated reconstruction algorithms are developed in the future.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Electroweak interactions in Nucleons and Nuclei

The neutrino oscillation experiments are being performed using detectors having moderate to heavy nuclear targets like $^{12}{C}$, $^{16}{O}$, $^{40}{Ar}$, $^{56}{Fe}$, $^{208}{Pb}$, etc. to get a reasonably good number of events. Many present-day neutrino experiments are taking data in the few GeV (1 $\leq$ E$_{\nu}$ $\leq$ 10 GeV) energy region of neutrinos and antineutrinos to which some of the neutrino oscillation parameters are sensitive and required to understand CP violation in the lepton sector. This is the energy region which is most intriguing as it receives the contribution from the Quasielastic Scattering~(QE), Inelastic Scattering(IE), Shallow Inelastic Scattering (SIS) and the Deep Inelastic Scattering~(DIS) processes. This thesis details three different studies: \begin{itemize} \item First, a DIS study was performed with the MINERvA experiment at the Fermilab. MINERvA is a dedicated neutrino and antineutrino cross-section measurement experiment and uses (anti)neutrino beams in the two energy runs {\it viz.} the low energy run~(the peak of which lies $\sim$ 3 GeV) and the medium energy run(the peak lies at $\sim$ 6 GeV). The MINERvA experiment is using several nuclear targets like $^{4}$He, $^{12}$C, $^{16}$O, $^{56}$Fe and $^{208}$Pb and the aim is to perform EMC~(European Muon Collaboration experiment using charged lepton beam on several nuclear targets) kind of measurements to understand the nuclear medium effects in both the neutrino and antineutrino modes in the wide region of Bjorken scaling variable $x$, and the four-momentum transfer squared $Q^2$, covering the quasielastic, inelastic, and the deep inelastic scattering regions. In the medium energy region, it is expected that more than 30\% of the events would arise due to DIS processes. \item Second part of the thesis includes the analysis of the proposed India-based Neutrino Observatory(INO) atmospheric neutrino experiment. This work is dedicated to studying atmospheric neutrino and ant ineutrino oscillation parameters in the INO experiment. We present the ICAL sensitivity to confirm a non-zero value of the difference in atmospheric mass squared of neutrinos and anti-neutrinos i.e. ($|\Delta m^{2}_{32}|$-$|\Delta\overline{m^{2}}_{32}|$). \item Third, the theoretical work that was performed at the Aligarh Muslim University. This work has been performed keeping in mind the theoretical development of a model that will describe the associated particle production induced by photons, electrons, neutrinos, and antineutrinos. We have studied the associated particle production induced by photons which receive the contributions from the non-resonant terms and from the nucleon, hyperon, and kaon resonances. \end{itemize}

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Signals of a New Gauge Boson from IceCube and Muon $g-2$

A $Z'$ boson associated with a broken $U(1)_{L_{\mu} - L_{\tau}}$ gauge symmetry offers an economical solution to the long-standing $g_\mu-2$ anomaly, confirmed and strengthened by recent measurements at Fermilab. Here, we revisit the impact of such a $Z'$ on the spectrum of high-energy astrophysical neutrinos, as measured by the IceCube experiment. This spectrum has been observed to exhibit a dip-like feature at $E_{\nu} \sim 0.2-1 \, {\rm PeV}$, which could plausibly arise from the physics of the sources themselves, but could also be the consequence of high-energy neutrinos resonantly scattering with the cosmic neutrino background, mediated by a $Z'$ with a mass on the order of $m_{Z'} \sim 10 \, {\rm MeV}$. In this study, we calculate the impact of such a $Z'$ on the high-energy neutrino spectrum for a variety of model parameters and source distributions. For couplings that can resolve the $g_{\mu}-2$ anomaly, we find that this model could self-consistently produce a spectral feature that is consistent with IceCube's measurement, in particular if the neutrinos observed by IceCube predominantly originate from high-redshift sources.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The fused-silica Cherenkov detector system for the Qweak experiment

The Qweak experiment will measure the proton's weak charge via the parity-violating asymmetry in electron-proton scattering, measuring the asymmetry to a precision of 5~parts per billion. A continuous $\sim 180~\mu$A beam of polarized 1.1~GeV electrons interacts with a 35~cm liquid hydrogen target. Elastically scattered electrons with momentum transfer $Q^2 \approx 0.03$~GeV$^2$ are focused onto an array of eight fused silica detectors, each 2~m long. Cherenkov light emitted inside the silica is collected by photomultiplier tubes. The typical electron rate in each detector is $\sim$700~MHz; during production data-taking, the photocurrent is measured continuously by low-noise integrating electronics. The accelerator can also deliver the same beam at much lower currents ($\sim100$~pA); for these measurements, the phototubes can be connected to higher-gain fast electronics capable of resolving single-electron events. In this talk I will describe the construction, operation, and performance of these detectors.

Mahurin, Robert↗