Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sheet”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Experimental investigation of possible geomagnetic feedback from energetic (0.1 to 16 keV) terrestrial O(+) ions in the magnetotail current sheet

Data from energetic ion mass spectrometers on the International Sun Earth Explorer 1 (ISEE 1) and AMPTE/CCE spacecraft are combined with geomagnetic and solar indices to investigate, in a statistical fashion, whether energized O(+) ions of terrestrial origin constitute a source of feedback which triggers or amplifies geomagnetic magnetotail current sheet. The ISSE 1 data (0.1-16 keV/e) provide in situ observations of the O(+) solar cycle 21, as well as inner magnetosphere data from same period. The CCE data (0.1-17 keV/e), taken during the subsequent solar minimum, all within 9 R(sub E), provide a reference for long-term variations in the magnetosphere O(+) content. Statistical correlations between the ion data and the indices, and between different indices, all point in the same direction: there is probably no feedback specific to the O(+) ions, in spite of the fact that they often contribute most of the ion mass density in the tail current sheet.

Lennartsson, O. W.↗

Backscatter model for the unusual radar properties of the Greenland Ice Sheet

A number of planetary objects exhibit large radar reflectivity and polarization ratios, and more recently, a similar behavior has been observed over a vast portion of the Earth's surface: the percolation facies of the Greenland Ice Sheet. Surface-based ranging radar data and snow stratigraphy studies demonstrated that the radar properties of that portion of Greenland are caused by enhanced scattering from massive, large, solid-ice bodies buried in the top few meters of the dry, cold, clean snowy surface of the ice sheet and created by seasonal melting and refreezing events. Here, we model the icy inclusions as randomly oriented, discrete, noninteracting, dielectric cylinders embedded in a transparent snow medium. An exact analytical solution is used to compute the scattered field from the cylinders. Using this model, we correctly predict the polarimetric radar observations gathered by an airborne imaging system at three wavelengths (5.6, 24, and 68 cm), between 19 deg and 65 deg incidence angle. The diameter and number density of the cylinders that are inferred from the radar data using the model are consistent with in situ observations of the icy inclusions. The large radar reflectivity and polarization ratios are interpreted as arising internal reflections of the radar signals in the icy inclusions that first-order external reflection models fail to predict. The results compare favorably with predictions from the coherent backscatter or weak localization theory and may provide a complementary framework for interpreting exotic radar echoes from other planetary objects.

Rignot, Eric↗

Automatic Inspection Of Heat Seals Between Plastic Sheets

Automatic inspection apparatus detects flaws in heat seals between films of polyethylene or other thermoplastic material. Heat-sealed strip in multilayer plastic sheet continuously moved lengthwise over illuminators. Variations in light transmitted through sheet interpreted to find flaws in heat seal. Site of flaw marked to facilitate subsequent manual inspection. Heat sealing used to join plastic films in manufacturing of variety of products, including inflatable toys and balloons carrying scientific instruments to high altitudes.

Rai, Kula R.↗

Observations of a groove in the interplanetary Lyman alpha pattern as the signature of enhanced ionisation in the neutral sheet

We report several observations of the Lyman alpha interplanetary emission recorded by a photometer flown in 1976-1977 on board the Soviet spacecraft Prognoz-5 and Prognoz-6. Several scans made in a plane perpendicular to the sun were cutting through the maximum emission region. where the interstellar hydrogen is approaching nearest to the sun (upwind region). On each of these scans is observed a dip in the intensity curve near the ecliptic plane. about 30 deg wide and approximately equals 10% deep. They reveal the presence of a new feature of the interplanetary emission. a 'groove' aligned approximately with the ecliptic plane. This groove is present only near the upwind direction, and is interpreted as the result of enhanced ionisation of interstellar H by charge-exchange with the solar wind in a sheet of approximately 30 deg around the average position of the neutral sheet at this time of solar this Lyman alpha groove is a prime target for future observations with SWAN experiment on SOHO.

Bertaux, J. L.↗

Assessment of Climate Variability of the Greenland Ice Sheet: Integration of In Situ and Satellite Data

The proposed research involves the application of multispectral satellite data in combination with ground truth measurements to monitor surface properties of the Greenland Ice Sheet which are essential for describing the energy and mass of the ice sheet. Several key components of the energy balance are parameterized using satellite data and in situ measurements. The analysis has been done for a 6 to 17 year time period in order to analyze the seasonal and interannual variations of the surface processes and the climatology. Our goal was to investigate to what accuracy and over what geographic areas large scale snow properties and radiative fluxes can be derived based upon a combination of available remote sensing and meteorological data sets. For the understanding of the surface processes a field program was designed to collect information on spectral albedo, specular reflectance, soot content, grain size and the physical properties of different snow types. Further, the radiative and turbulent fluxes at the ice/snow surface were monitored for the parameterization and interpretation of the satellite data. Highlights include AVHRR time series and surface based radiation measurements, passive microwave time series, and geodetic results from the ETH/CU camp.

Steffen, K.↗

An Experimental Study of Fatigue Crack Growth in Aluminum Sheet Subjected to Combined Bending and Membrane Stresses

An experimental study was conducted to determine the effects of combined bending and membrane cyclic stresses on the fatigue crack growth behavior of aluminum sheet material. The materials used in the tests were 0.040-in.- thick 2024-T3 alclad and 0.090-in.-thick 2024-T3 bare sheet. In the tests, the membrane stresses were applied as a constant amplitude loading at a stress ratio (minimum to maximum stress) of 0.02, and the bending stresses were applied as a constant amplitude deflection in phase with the membrane stresses. Tests were conducted at ratios of bending to membrane stresses (B/M) of 0, 0.75, and 1.50. The general trends of the results were for larger effects of bending for the higher B/M ratios, the lower membrane stresses, and the thicker material. The addition of cyclic bending stresses to a test with cyclic membrane stresses had only a small effect on the growth rates of through-thickness cracks in the thin material, but had a significant effect on the crack growth rates of through-thickness cracks in the thick material. Adding bending stresses to a test had the most effect on the initiation and early growth of cracks and had less effect on the growth of long through-thickness cracks.

Phillips, Edward P.↗

Energization of Ions in near-Earth current sheet disruptions

In this study we examine observations made by AMPTE/CCE of energetic ion bursts during seven substorm periods when the satellite was located near the neutral sheet, and CCE observed the disruption cross-tail current in situ. We compare ion observations to analytic calculations of particle acceleration. We find that the acceleration region size, which we assume to be essentially the current disruption region, to be on the order of 1 R(sub E). Events exhibiting weak acceleration had either relatively small acceleration regions (apparently associated with pseudobreakup activity on the ground) or relatively small changes in the local magnetic field (suggesting that the magnitude of the local current disruption region was limited). These results add additional support for the view that the particle bursts observed during turbulent current sheet disruptions are due to inductive acceleration of ions.

Taktakishvili, A.↗

Measuring Geophysical Parameters of the Greenland Ice Sheet using Airborne Radar Altimetry

This paper presents radar-altimeter scattering models for each of the diagenetic zones of the Greenland ice sheet. AAFE radar- altimeter waveforms obtained during the 1991 and 1993 NASA multi-sensor airborne altimetry experiments over Greenland reveal that the Ku-band return pulse changes significantly with the different diagenetic zones. These changes are due to varying amounts of surface and volume scattering in the return waveform. In the ablation and soaked zones, where surface scattering dominates the AAFE return, geophysical parameters such as rms surface height and rms surface slope are obtained by fitting the waveforms to a surface-scattering model. Waveforms from the percolation zone show that the sub-surface ice features have a much more significant effect on the return pulse than the surrounding snowpack. Model percolation waveforms, created using a combined surface- and volume-scattering model and an ice-feature distribution obtained during the 1993 field season, agree well with actual AAFE waveforms taken in the same time period. Using a combined surface- and volume-scattering model for the dry-snow-zone return waveforms, the rms surface height and slope and the attenuation coefficient of the snowpack are obtained. These scattering models not only allow geophysical parameters of the ice sheet to be measured but also help in the understanding of satellite radar-altimeter data.

Ferraro, Ellen J.↗

Catalogue of X-Ray Texture Data for Al-Cu-Li Alloy 1460, 2090, 2096 and 2195 Near-Net-Shape Extrusions, Sheet and Plate

The effect of crystallographic texture on the mechanical properties of near-net-shape extrusions is of major interest ff these products are to find application in launch vehicle or aircraft structures. The objective of this research was to produce a catalogue containing quantitative texture information for extruded product, sheet and plate. The material characterized was extracted from wide, integrally stiffened panels fabricated from the Al-Cu-Li alloys 1460, 2090, 2096 and 2195. The textural characteristics of sheet and plate products of the same alloys were determined for comparison purposes. The approach involved using X-ray diffraction to generate pole figures in combination with orientation distribution function analysis. The data were compiled as a function of location in the extruded cross-sections and the variation in the major deformation- and recrystallization-related texture components was identified.

Hales, Stephen J.↗

Analyses of Buckling and Stable Tearing in Thin-Sheet Materials

This paper was to verify the STAGS (general shell, geometric and material nonlinear) code and the critical crack tip opening angle (CTOA) fracture criterion for predicting stable tearing in cracked panels that fail with severe out of plane buckling. Materials considered ranged from brittle to ductile behavior. Test data used in this study are reported elsewhere. The STAGS code was used to model stable tearing using a critical CTOA value that was determined from a cracked panel that was 'restrained' from buckling. ne analysis methodology was then used to predict the influence of buckling on stable tearing and failure loads. Parameters like crack length to specimen width ratio, crack configuration, thickness, and material tensile properties had a significant influence on the buckling behavior of cracked thin sheet materials. Experimental and predicted results showed a varied buckling response for different crack length to sheet thickness ratios because different buckling modes were activated. Effects of material tensile properties and fracture toughness on buckling response were presented. The STAGS code and the CTOA fracture criterion were able to predict the influence of buckling on stable tearing behavior and failure loads on a variety of materials and crack configurations.

Seshadri, B. R.↗

Effect of Decarburization on Notch Sensitivity and Fatigue-Crack-Propagation Rates in 12 MoV Stainless-Steel Sheet

Tests were conducted in order to determine the effect of surface decarburization on the notch sensitivity and rate of fatigue crack propagation in 12 MoV stainless-steel sheet at room temperature. Three specimen configurations were utilized in the course of the investigation: standard tensile specimen, 9-inch-wide specimens containing fatigue cracks or thread-cut notches of 0.005-inch radius, and 2-inch-wide specimens containing fatigue cracks. The 12 MoV stainless-steel sheet in the normal condition was found to have an ultimate tensile strength of 251 ksi and to be extremely notch sensitive. The material in the decarburized condition was found to have an ultimate tensile strength of 210 ksi and to be considerably stronger than the normal material in the presence of fatigue cracks. Decarburization did not appear to have any significant influence on the rate of fatigue crack propagation in the 2-inch-wide specimens at the stress levels considered. In addition to the tests, two methods for predicting residual static strength and their application to the material are discussed.

Herrnstein, William H., III↗

Investigation of Problems Associated with the Use of Alloyed Molybdenum Sheet in Structures at Elevated Temperatures

The results of an experimental study to explore the capabilities and limitations of thin Mo-0.5Ti molybdenum-alloy sheet for structural applications at high temperatures are presented. Evaluation tests at temperatures ranging from room temperature,to 3000 F were made on resistance-welded corrugated-core sandwiches that were coated with a commercially available oxidation resistant coating known as W-2 and on coated oxidation and tensile specimens. The performance of the corrugated-core sandwiches in compressive strength and static oxidation tests, tensile properties of the coated molybdenum sheet, and the life of the coated specimens in static oxidation tests are given. A description of the equipment and procedures utilized in performing the evaluation tests is included.

Mathauser, Eldon E.↗

Global Geodetic Signatures of the Antarctic Ice Sheet

Four scenarios of present day Antarctic ice sheet mass change are developed from comprehensive reviews of the available glaciological and oceanographic evidence. The gridded scenarios predict widely varying contributions to secular sea level change xi ranging from -1.1 to 0.45 mm/yr, and predict polar motion m and time-varying low-degree gravitational coefficients J(sub l) that differ significantly from earlier estimates. A reasonably linear relationship between the rate of sea level change from Antarctica xi(sub A) and the predicted Antarctic J(sub l) is found for the four scenarios. This linearity permits a series of forward models to be constructed that incorporate the effects of ice mass changes in Antarctica, Greenland, and distributed smaller glaciers, as well as postglacial rebound (assuming the ICE-3G deglaciation history), with the goal of obtaining optimum reconciliation between observed constraints on J(sub l) and sea level rise xi. Numerous viable combinations of lower mantle viscosity and hydrologic sources are found that safely "observed" in the range of 1 to 2-2.5 mm/yr and observed J(sub l) for degrees 2, 3, and 4. In contrast, rates of global sea level rise above 2.5 mm/yr are inconsistent with available J(sub l) observations. The successful composite models feature a pair of lower mantle viscosity solutions arising from the sensitivity of J(sub l) to glacial rebound. The paired values are well separated at xi = 1 mm/yr, but move closer together as xi is increased, and, in fact, merge around xi = 2 - 2.5 mm/yr, revealing an intimate relation between xi and preferred lower mantle viscosity. This general pattern is quite robust and persists for different J(sub l) solutions, for variations in source assumptions, and for different styles of lower mantle viscosity stratification. Tighter J(sub l) constraints for l greater than 2 may allow some viscosity stratification schemes and source assumptions to be excluded in the future. For a given total observed xi the sea level rise from Antarctica xi(sub A) is tightly constrained and ranges from 0 to + 1 mr/yr (corresponding to an ablating ice sheet) as estimates of xi are raised from 1 to 2.5 mm/yr. However, when the degree 3 zonal harmonic constraint is removed, the solutions show little sensitivity to Antarctic mass balance, emphasizing the need for a well determined odd-degree secular zonal harmonic for determining polar ice mass balance.

James, Thomas S.↗

Sources and Transport of Plasma Sheet Ions During Magnetospheric Substorms

This study investigates the sources and transport of ions observed in the near-Earth plasma sheet during the growth and expansion phases of a magnetospheric substorm that took place on November 24, 1996. The sources and acceleration mechanisms of ions observed at Geotail were determined by calculating the trajectories of thousands of ions backward in time. We found that during the growth phase of the substorm, most of the ions reaching Geotail had origins in the low latitude boundary layer (LLBL) and were already in the magnetosphere when the growth phase began. Late in the growth phase and in the expansion phase more plasma mantle ions reached the Geotail location. Indeed, during the expansion phase more than 90% of the ions were from the mantle. The ions were accelerated enroute to the spacecraft; however, most of the energy gained was achieved by non-adiabatic acceleration during the ions' crossing of the equatorial current sheet just prior to the detection of the ions.

Ashour-Abdalla, M.↗

Large Ice Discharge From the Greenland Ice Sheet

The objectives of this work are to measure the ice discharge of the Greenland Ice Sheet close to the grounding line and/or calving front, and compare the results with mass accumulation and ablation in the interior to estimate the ice sheet mass balance.

Rignot, Eric↗

Airborne Resurveys of the Southern Greenland Ice Sheet

Airborne laser-altimeter flight lines from 1993 over southern parts of the ice sheet were resurveyed with almost complete repeat coverage. In 1993 and 1994, NASA surveyed the entire Greenland ice sheet by airborne laser altimeter, obtaining surface-elevation profiles with root mean square (rms) accuracies of 10 cm or better (Krabill 1995) along flight lines that crossed all the major catchment basins. In 1998, the ten flight lines flown in 1993 in the south of Greenland were resurveyed with about 99% repeat coverage; flight lines in the north will be resurveyed in 1999. Additional flights in 1998 were over glaciers, identified by E. Rignot, where existing SAR data give information on ice motion.

Krabill, William B.↗

Ice Thicknesses and Driving Stresses of Greenland Ice Sheet

Surface elevations from satellite radar altimetry (Geosat, Seasat, and ERS-1) and bedrock topography from airborne radar sounding (Simon Ekholm's Danish compilation) are combined to derive maps of the driving stresses in the Greenland ice sheet. The stress vector, tau = rho g h sin(alpha), is calculated using surface slope vectors, alpha, from surface elevations and ice thicknesses, h, from the difference between surface and basal elevations. Since the 5-km scale of the surface slope is only about 2 times the ice thickness, the stress maps show spatial variations indicative of longitudinal stress gradients associated with topographic undulations. Values of alpha generally vary from near zero at the ice divides to maxima values around 120 kpa, returning to near zero in a narrow band at the edges. The distribution of alpha's peaks at 60 kpa with an approximate sigma of +/- 20 kpa. Areas of very low alpha near the origin of the northeast ice stream may indicate small sub-glacial lakes. The profile of alpha, down the ice stream from near the ice divide, increases to a maximum of about 120 kpa near the margin, which is characteristic of East Antarctic outlet glaciers and in contrast to West Antarctic ice streams where alpha has maximum values 400 to 500 km inland from the grounding lines. Overall distributions of alpha values are compared with those for the Antarctic ice sheet and the Mars Northern ice cap.

Zwally, H. J.↗

Velocity Estimates of Fast-Moving Outlet Glaciers on the Greenland Ice Sheet

In recent years, airborne laser altimetry has been used with great success to investigate the mass balance characteristics of the Greenland ice sheet. One spinoff of this activity has been the application of these measurements to the study of surface velocities in some of Greenland's fast-moving drainage glaciers. This is accomplished by tracking the motion of elevation features, primarily crevasses, in pairs of aircraft laser altimetry surveys. Detailed elevation measurements are made along or across glaciers of interest with a scanning swath of 150 to 200 meters, and the surveys are repeated several days later, typically to within better than 50 meters of the previous flight line. Surface elevation features are identified in each image, and their offsets are compared yielding detailed velocities over narrow regions. During the 1998 field season, repeat flights were made over three glaciers for the purpose of estimating their surface velocities. These were the Kangerdlugssuaq and Helheim glaciers on the east coast and the Jakobshavn Isbrae on the west coast. Each flows at such high speeds (on the order of a few kilometers per year) that their flow rates are difficult to assess by means of radar interferometry. The flexibility of the aircraft platform, however, allows for detailed measurements of the elevation and flow of these drainage areas, which are responsible for a significant portion of the ice discharge from the Greenland ice sheet. Velocity estimates for transects that span these glaciers will be presented, and where the ice thickness values are available (provided by researchers from the University of Kansas) the fluxes will be calculated.

Abdalati, Waleed↗