Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SWITCH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Electro-Optical Switching of Gradient 2D-PDLC Films

A tunable electro-optical switching is reported for single-layered polymer-dispersed liquid crystal (PDLC) films, controlled by the film thickness. Thin planar film of two-dimensional layer of thickness continuously varying from a few micrometers to several tens of micrometers is examined. The wedge-confined PDLC single layer contains E7 liquid-crystal microdroplets dispersed in a transparent polymer matrix of NOA65. The diameters of the droplets with a linear-gradient size distribution along the wedge slope reach several tens of micrometers, defined by the wedge geometry of the film. The electro-optical switching of the single-layered PDLC film is linked to its microstructure and droplet organization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-speed all-optical terahertz polarization switching by a transient plasma phase modulator

We demonstrate high-speed all-optical polarization switching of broadband terahertz frequency electromagnetic fields with subpicosecond switch-on time. This is achieved through the use of a two-plasma configuration in an orthogonal geometry in which one plasma modulates the relative phase of a two-color optical pump field, enabling rapid terahertz polarization modulation at rates limited by the repetition-rate of the control pulse.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Beamline for Fast Polarization Switching at NSLS-II

The first XUV beamline (200-2000 eV) at NSLS-II will have two branches, one optimized for photon hungry experiments requiring high coherent flux and one optimized for studies of polarization sensitive materials and interfaces based on fast polarization switching. We describe here the branch designed for fast polarization switching with frequencies up to 1 kHz, high photon flux, and good energy resolution. The beamline will be served by two canted undulators and is based on the focusing variable line spacing grating monochromator. The two beams will be focused at the same spot of approximately 80x10 {mu}m (hor.xver.). The expected circular polarized flux at the sample from each device up to 1.4 keV will be higher than 10{sup 12} photons/s at a resolving power better than 10{sup 4}. An additional KB focusing system will deliver the two beams to a spot in the {mu}m range.

43 PARTICLE ACCELERATORS↗

In situ transmission electron microscopy analysis of conductive filament during solid electrolyte resistance switching

An in situ transmission electron microscopy (TEM) analysis of a solid electrolyte, Cu-GeS, during resistance switching is reported. Real-time observations of the filament formation and disappearance process were performed in the TEM instrument and the conductive-filament-formation model was confirmed experimentally. Narrow conductive filaments were formed corresponding to resistance switching from high- to low-resistance states. When the resistance changed to high-resistance state, the filament disappeared. It was also confirmed by use of selected area diffractometry and energy-dispersive x-ray spectroscopy that the conductive filament was made of nanocrystals composed mainly of Cu.

36 MATERIALS SCIENCE↗

Origin of magnetic switching field distribution in bit patterned media based on pre-patterned substrates

Using a combination of synchrotron radiation based magnetic imaging and high-resolution transmission electron microscopy we reveal systematic correlations between the magnetic switching field and the internal nanoscale structure of individual islands in bit patterned media fabricated by Co/Pd-multilayer deposition onto pre-patterned substrates. We find that misaligned grains at the island periphery are a common feature independent of the island switching field, while irregular island shapes and misaligned grains specifically extending into the center of an island are systematically correlated with a reduced island reversal field.

36 MATERIALS SCIENCE↗

Spectrographic temperature measurement of a high power breakdown arc in a high pressure gas switch

A procedure for obtaining an approximate temperature value of conducting plasma generated during self-break closure of a RIMFIRE gas switch is described. The plasma is in the form of a breakdown arc which conducts approximately 12 kJ of energy in 1 {mu}s. A spectrographic analysis of the trigger-section of the 6-MV RIMFIRE laser triggered gas switch used in Sandia National Laboratory's ''Z-Machine'' has been made. It is assumed that the breakdown plasma has sufficiently approached local thermodynamic equilibrium allowing a black-body temperature model to be applied. This model allows the plasma temperature and radiated power to be approximated. The gas dielectric used in these tests was pressurized SF{sub 6}. The electrode gap is set at 4.59 cm for each test. The electrode material is stainless steel and insulator material is poly(methyl methacrylate). A spectrum range from 220 to 550 nanometers has been observed and calibrated using two spectral irradiance lamps and three spectrograph gratings. The approximate plasma temperature is reported.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Thermodynamic, Raman and electrical switching studies on Si{sub 15}Te{sub 85-x}Ag{sub x} (4 {<=} x {<=} 20) glasses

We have investigated thermal properties of bulk Si{sub 15}Te{sub 85-x}Ag{sub x} (4 {<=} x {<=} 20) glasses in detail, through alternating differential scanning calorimetry experiments. The composition dependence of thermal parameters reveal the signatures of rigidity percolation and chemical threshold at compositions x = 12 and x = 19, respectively. The stability and glass forming ability of these glasses have also been determined using the data obtained from different thermodynamic quantities and it is found that the Si{sub 15}Te{sub 85-x}Ag{sub x} glasses in the region 12 {<=} x {<=} 17 are more stable when compared to other glasses of the same series. Further, the blueshift observed in Raman spectroscopy investigations, in the composition range 12 {<=} x {<=} 13, support the occurrence of stiffness threshold in this composition range. All Si{sub 15}Te{sub 85-x}Ag{sub x} (4 {<=} x {<=} 20) glasses are found to exhibit memory type switching (for sample thickness 0.25 mm) in the input current range 3-9 mA. The effect of rigidity percolation and chemical thresholds on switching voltages are observed at x = 12 and 19, respectively.

36 MATERIALS SCIENCE↗

Switching of bound vector solitons for the coupled nonlinear Schroedinger equations with nonhomogenously stochastic perturbations

We investigate the dynamics of the bound vector solitons (BVSs) for the coupled nonlinear Schroedinger equations with the nonhomogenously stochastic perturbations added on their dispersion terms. Soliton switching (besides soliton breakup) can be observed between the two components of the BVSs. Rate of the maximum switched energy (absolute values) within the fixed propagation distance (about 10 periods of the BVSs) enhances in the sense of statistics when the amplitudes of stochastic perturbations increase. Additionally, it is revealed that the BVSs with enhanced coherence are more robust against the perturbations with nonhomogenous stochasticity. Diagram describing the approximate borders of the splitting and non-splitting areas is also given. Our results might be helpful in dynamics of the BVSs with stochastic noises in nonlinear optical fibers or with stochastic quantum fluctuations in Bose-Einstein condensates.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ultrafast switching in wetting properties of TiO{sub 2}/YSZ/Si(001) epitaxial heterostructures induced by laser irradiation

We have demonstrated dark hydrophilicity of single crystalline rutile TiO{sub 2}(100) thin films, in which rapid switching from a hydrophobic to a hydrophilic surface was achieved using nanosecond excimer laser irradiation. The TiO{sub 2}/YSZ/Si(001) single crystalline heterostructures were grown by pulsed laser deposition and were subsequently irradiated by a single pulse of a KrF excimer laser at several energies. The wettability of water on the surfaces of the samples was evaluated. The samples were hydrophobic prior to laser annealing and turned hydrophilic after laser annealing. Superhydrophilic surfaces were obtained at higher laser energy densities (e.g., 0.32 J.cm{sup -2}). The stoichiometries of the surface regions of the samples before and after laser annealing were examined using XPS. The results revealed the formation of oxygen vacancies on the surface, which are surmised to be responsible for the observed superhydrophilic behavior. According to the AFM images, surface smoothening was greater in films that were annealed at higher laser energy densities. The samples exhibited hydrophobic behavior after being placed in ambient atmosphere. The origin of laser induced wetting behavior was qualitatively understood to stem from an increase of point defects near the surface, which lowered the film/water interfacial energy. This type of rapid hydrophobic/hydrophilic switching may be used to facilitate fabrication of electronic and photonic devices with novel properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Current dependence of spin torque switching rate based on Fokker-Planck approach

The spin torque switching rate of an in-plane magnetized system in the presence of an applied field is derived by solving the Fokker-Planck equation. It is found that three scaling currents are necessary to describe the current dependence of the switching rate in the low-current limit. The dependences of these scaling currents on the applied field strength are also studied.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Resistive switching properties of Ce and Mn co-doped BiFeO{sub 3} thin films for nonvolatile memory application

The Ce and Mn co-doped BiFeO{sub 3} (BCFMO) thin films were synthesized on Pt/Ti/SiO{sub 2}/Si substrates using a sol-gel method. The unipolar resistive switching (URS) and bipolar resistive switching (BRS) behaviors were observed in the Pt/BCFMO/Pt device structure, which was attributed to the formation/rupture of metal filaments. The fabricated device exhibits a large R{sub OFF}/R{sub ON} ratio (>80), long retention time (>10{sup 5} s) and low programming voltages (<1.5 V). Analysis of linear fitting current-voltage curves suggests that the space charge limited leakage current (SCLC) and Schottky emission were observed as the conduction mechanisms of the devices.

36 MATERIALS SCIENCE↗

Magnetic manipulation by resistance switching in CeO{sub 2}/PrBa{sub 2}Cu{sub 3}O{sub 7−δ}/Pt heterostructure: The role of oxygen vacancies

Pronounced bipolar resistance switching with a good retention property has been observed in CeO{sub 2}/PrBa{sub 2}Cu{sub 3}O{sub 7−δ}/Pt heterostructure. The low resistance state and high resistance state exhibited distinguished ferromagnetic signals, as compared to the nearly non-magnetic initial state. It is found that the migration of the oxygen vacancies under electric field is mainly responsible for the electric and the magnetic changes. The modified interfacial electronic structure by the oxygen vacancy migration and the trapping/detrapping of the carriers leads to the resistance switching. The exchange interaction of the hydrogen-like orbitals formed around the singly occupied oxygen vacancies in CeO{sub 2} is accounting for the emerged and modulated ferromagnetic signals. Temperature dependence of resistance in the low resistance state follows a variable range hopping law, further confirming that the amount of oxygen vacancies in the CeO{sub 2} layer directly affects the hydrogen-like orbital radius, which determines the strength of the ferromagnetic coupling.

36 MATERIALS SCIENCE↗

Spin-orbit torque magnetization switching of a three-terminal perpendicular magnetic tunnel junction

We report on the current-induced magnetization switching of a three-terminal perpendicular magnetic tunnel junction by spin-orbit torque and its read-out using the tunnelling magnetoresistance (TMR) effect. The device is composed of a perpendicular Ta/FeCoB/MgO/FeCoB stack on top of a Ta current line. The magnetization of the bottom FeCoB layer can be switched reproducibly by the injection of current pulses with density 5 × 10{sup 11} A/m{sup 2} in the Ta layer in the presence of an in-plane bias magnetic field, leading to the full-scale change of the TMR signal. Our work demonstrates the proof of concept of a perpendicular spin-orbit torque magnetic memory cell.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Origin of attendant phenomena of bipolar resistive switching and negative differential resistance in SrTiO{sub 3}:Nb/ZnO heterojunctions

Epitaxial ZnO thin films were grown on SrTiO{sub 3}:Nb (NSTO) substrates by pulsed laser deposition. The NSTO/ZnO heterojunctions exhibit a typical rectification characteristic under a small voltage, while two attendant behaviors of bipolar resistive switching and negative differential resistance appear under a large voltage. The NSTO/ZnO heterojunctions show extremely weak resistance switching hysteresis without applying a forward bias. However, when the forward bias increases to some extent, the hysteresis becomes more and more prominent and negative differential resistance gradually appears. Furthermore, the high resistance state is obtained when sweeping from negative to positive voltage bias, and vice versa. We propose a model for these behaviors at NSTO/ZnO interface, in which the space charge region in ZnO is wide in high resistance state when the interface state is unoccupied, while the space charge region becomes narrower in low resistance state due to Fermi pinning when the interface state is completely occupied, and the low resistance state is remained until electrons are detrapped from the interface state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Towards forming-free resistive switching in oxygen engineered HfO{sub 2−x}

We have investigated the resistive switching behavior in stoichiometric HfO{sub 2} and oxygen-deficient HfO{sub 2−x} thin films grown on TiN electrodes using reactive molecular beam epitaxy. Oxygen defect states were controlled by the flow of oxygen radicals during thin film growth. Hard X-ray photoelectron spectroscopy confirmed the presence of sub-stoichiometric hafnium oxide and defect states near the Fermi level. The oxygen deficient HfO{sub 2−x} thin films show bipolar switching with an electroforming occurring at low voltages and low operating currents, paving the way for almost forming-free devices for low-power applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultrafast thermally induced magnetic switching in synthetic ferrimagnets

Synthetic ferrimagnets are composite magnetic structures formed from two or more anti-ferromagnetically coupled magnetic sublattices with different magnetic moments. Here, we report on atomistic spin simulations of the laser-induced magnetization dynamics on such synthetic ferrimagnets and demonstrate that the application of ultrashort laser pulses leads to sub-picosecond magnetization dynamics and all-optical switching in a similar manner as in ferrimagnetic alloys. Moreover, we present the essential material properties for successful laser-induced switching, demonstrating the feasibility of using a synthetic ferrimagnet as a high density magnetic storage element without the need of a write field.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Chiral-induced self-assembly sphere phase liquid crystal with fast switching time

A fluid self-assembly sphere phase (SP) of liquid crystal induced by chiral dopant is observed in a narrow temperature range between isotropic and blue phase or between isotropic and chiral nematic phase. The SP consists of three-dimensional twist spheres (3-DTSs) and disclinations among 3-DTSs. The temperature range of the SP has been broadened to more than 85 °C by stabilizing the disclinations with amorphous polymer chains. The electro-optical switching time of the polymer-stabilized SP is demonstrated in sub-millisecond with a low switching electric field of 4.4 V μm{sup −1}, which is of promising applications in displays, 3-D tunable photonic crystals, and phase modulators.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Open-loop correction for an eddy current dominated beam-switching magnet

A beam-switching magnet and the pulsed power supply it requires have been developed for the Japan Proton Accelerator Research Complex. To switch bunched proton beams, the dipole magnetic field must reach its maximum value within 40 ms. In addition, the field flatness should be less than 5 × 10{sup −4} to guide each bunched beam to the designed orbit. From a magnetic field measurement by using a long search coil, it was found that an eddy current in the thick endplates and laminated core disturbs the rise of the magnetic field. The eddy current also deteriorates the field flatness over the required flat-top period. The measured field flatness was 5 × 10{sup −3}. By using a double-exponential equation to approximate the measured magnetic field, a compensation pattern for the eddy current was calculated. The integrated magnetic field was measured while using the newly developed open-loop compensation system. A field flatness of less than 5 × 10{sup −4}, which is an acceptable value, was achieved.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗