Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STACKS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Oxygen-induced immediate onset of the antiferromagnetic stacking in thin Cr films on Fe(001)

We investigated the magnetic coupling of ultra-thin Cr films grown at 600 K on a Fe(001)-p(1 × 1)O substrate by means of spin-polarized photoemission spectroscopy. Our findings show that the expected antiferromagnetic stacking of the magnetization in Cr(001) layers occurs right from the first atomic layer at the Cr/Fe interface. This is at variance with all previous observations in similar systems, prepared in oxygen-free conditions, which always reported on a delayed onset of the magnetic oscillations due to the occurrence of significant chemical alloying at the interface, which is substantially absent in our preparation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultra-thin distributed Bragg reflectors via stacked single-crystal silicon nanomembranes

In this paper, we report ultra-thin distributed Bragg reflectors (DBRs) via stacked single-crystal silicon (Si) nanomembranes (NMs). Mesh hole-free single-crystal Si NMs were released from a Si-on-insulator substrate and transferred to quartz and Si substrates. Thermal oxidation was applied to the transferred Si NM to form high-quality SiO{sub 2} and thus a Si/SiO{sub 2} pair with uniform and precisely controlled thicknesses. The Si/SiO{sub 2} layers, as smooth as epitaxial grown layers, minimize scattering loss at the interface and in between the layers. As a result, a reflection of 99.8% at the wavelength range from 1350 nm to 1650 nm can be measured from a 2.5-pair DBR on a quartz substrate and 3-pair DBR on a Si substrate with thickness of 0.87 μm and 1.14 μm, respectively. The high reflection, ultra-thin DBRs developed here, which can be applied to almost any devices and materials, holds potential for application in high performance optoelectronic devices and photonics applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Impact of cyclic plasma treatment on oxygen vacancy defects in TiN/HfZrO/SiON/Si gate stacks

This work evaluates the defects in HfZrO as a function of Zr addition into HfO{sub 2} and when the dielectric was subjected to a slot-plane-antenna (SPA) plasma treatment in a cyclic process to form TiN/HfZrO/SiON/Si gate stacks. The defect energy levels, estimated by temperature-dependent current-voltage measurements, suggest that Zr addition in HfO{sub 2} modifies the charge state of the oxygen vacancy formation, V{sup +}. The influence of electron affinity variation of Hf and Zr ions on the charged oxygen vacancy levels seems to have contributed to the increase in defect activation energy, E{sub a}, from 0.32 eV to 0.4 eV. The cyclic SPA plasma exposure further reduces the oxygen vacancy formation because of the film densification. When the dielectric was subjected to a constant voltage stress, the charge state oxygen vacancy formation changes to V{sup 2+} and improvement was eliminated. The trap assisted tunneling behavior, as observed by the stress induced leakage current characteristics, further supports the oxygen vacancy formation model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Indium and gallium diffusion through zirconia in the TiN/ZrO{sub 2}/InGaAs stack

Angle-resolved X-ray Photoelectron Spectroscopy (ARXPS) was applied to the TiN/ZrO{sub 2}/InGaAs stack to assess its thermal stability. Through a robust ARXPS analysis, it was possible to observe subtle effects such as the thermally induced diffusion of substrate atomic species (In and Ga) through the dielectric layer. The detailed characterization of the film structure allowed for assessing the depth profiles of the diffused atomic species by means of the scenarios-method. Since the quantification for the amount of diffused material was done at different temperatures, it was possible to obtain an approximate value of the activation energy for the diffusion of indium through zirconia. The result is very similar to the previously reported values for indium diffusion through alumina and through hafnia.

36 MATERIALS SCIENCE↗

Evolution of interfacial Fermi level in In{sub 0.53}Ga{sub 0.47}As/high-κ/TiN gate stacks

The net charge state was probed of metal-oxide-semiconductor gate stacks consisting of In{sub 0.53}Ga{sub 0.47}As /high-κ dielectric/5 nm TiN, for both Al{sub 2}O{sub 3} and HfO{sub 2} dielectrics, via investigation of band bending at the InGaAs/high-κ interface. Using pump-probe photoelectron spectroscopy, changes to band bending were studied for each sequential layer deposited onto the InGaAs substrate and subsequent annealing up to 600 °C. Two behavioral regions were observed in annealing studies: (1) a lower temperature (<350 °C) region, attributed to changes at the high-κ/TiN interface, and (2) a higher temperature region (> 350 °C), associated with a net positive charge increase within the oxide. These band bending measurements delineate the impact of processing steps inherently inaccessible via capacitance-voltage electrical characterization.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fermi level pinning in metal/Al{sub 2}O{sub 3}/InGaAs gate stack after post metallization annealing

The effect of post metal deposition annealing on the effective work function in metal/Al{sub 2}O{sub 3}/InGaAs gate stacks was investigated. The effective work functions of different metal gates (Al, Au, and Pt) were measured. Flat band voltage shifts for these and other metals studied suggest that their Fermi levels become pinned after the post-metallization vacuum annealing. Moreover, there is a difference between the measured effective work functions of Al and Pt, and the reported vacuum work function of these metals after annealing. We propose that this phenomenon is caused by charging of indium and gallium induced traps at the annealed metal/Al{sub 2}O{sub 3} interface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Stacking order dependent mechanical properties of graphene/MoS{sub 2} bilayer and trilayer heterostructures

Transition metal dichalcogenides (TMDC) such as molybdenum disulfide (MoS{sub 2}) are two-dimensional materials that show promise for flexible electronics and piezoelectric applications, but their weak mechanical strength is a barrier to practical use. In this work, we perform nanoindentation simulations using atomistic molecular dynamics to study the mechanical properties of heterostructures formed by combining MoS{sub 2} with graphene. We consider both bi- and tri-layer heterostructures formed with MoS{sub 2} either supported or encapsulated by graphene. Mechanical properties, such as Young's modulus, bending modulus, ultimate tensile strength, and fracture strain, are extracted from nanoindentation simulations and compared to the monolayer and homogeneous bilayer systems. We observed that the heterostructures, regardless of the stacking order, are mechanically more robust than the mono- and bi-layer MoS{sub 2}, mainly due to the mechanical reinforcement provided by the graphene layer. The magnitudes of ultimate strength and fracture strain are similar for both the bi- and tri-layer heterostructures, but substantially larger than either the mono- and bi-layer MoS{sub 2}. Our results demonstrate the potential of graphene-based heterostructures to improve the mechanical properties of TMDC materials.

36 MATERIALS SCIENCE↗

Bidirectional threshold switching in engineered multilayer (Cu{sub 2}O/Ag:Cu{sub 2}O/Cu{sub 2}O) stack for cross-point selector application

In this study, we achieved bidirectional threshold switching (TS) for selector applications in a Ag-Cu{sub 2}O-based programmable-metallization-cell device by engineering the stack wherein Ag was intentionally incorporated in the oxide (Cu{sub 2}O) layer by a simple approach comprising co-sputtering and subsequent optimized annealing. The distribution of the Ag was directly confirmed by transmission electron microscopy and energy dispersive spectroscopy line profiling. The observed TS occurred because of the spontaneous self-rupturing of the unstable Ag filament that formed in the oxide layer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Al and Ge simultaneous oxidation using neutral beam post-oxidation for formation of gate stack structures

To obtain a high-quality Germanium (Ge) metal–oxide–semiconductor structure, a Ge gate stacked structure was fabricated using neutral beam post-oxidation. After deposition of a 1-nm-thick Al metal film on a Ge substrate, simultaneous oxidation of Al and Ge was carried out at 300 °C, and a Ge oxide film with 29% GeO{sub 2} content was obtained by controlling the acceleration bias power of the neutral oxygen beam. In addition, the fabricated AlO{sub x}/GeO{sub x}/Ge structure achieved a low interface state density of less than 1 × 10{sup 11 }cm{sup −2 }eV{sup −1} near the midgap.

36 MATERIALS SCIENCE↗

Transport properties of AB stacked (Bernal) bilayer graphene on and without substrate within 2- and 4-band approximations

We present the results of the calculations of longitudinal and Hall conductivities of AB-stacked bilayer graphene as a function of frequency, finite chemical potential, temperature both with and without magnetic fields on a base of 2- and 4-band effective models. The limited cases of the conductivities for direct current are derived. The relations being important for optoelectronic among Hall conductivities and Faraday, Kerr angles in the AB-bilayers samples in the electric and magnetic fields when the radiation passes across bilayer sheets on different kinds a substrate are obtained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Border trap reduction in Al{sub 2}O{sub 3}/InGaAs gate stacks

The effect of Al{sub 2}O{sub 3} atomic layer deposition (ALD) temperature on the border trap density (N{sub bt}) of Al{sub 2}O{sub 3}/InGaAs gate stacks is investigated quantitatively, and we demonstrate that lowering the trimethylaluminum (TMA)/water vapor ALD temperature from 270 °C to 120 °C significantly reduces N{sub bt}. The reduction of N{sub bt} coincides with increased hydrogen incorporation in low temperature ALD-grown Al{sub 2}O{sub 3} films during post-gate metal forming gas annealing. It is also found that large-dose (∼6000 L) exposure of the In{sub 0.53}Ga{sub 0.47}As (100) surface to TMA immediately after thermal desorption of a protective As{sub 2} capping layer is an important step to guarantee the uniformity and reproducibility of high quality Al{sub 2}O{sub 3}/InGaAs samples made at low ALD temperatures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electrically programmable-erasable In-Ga-Zn-O thin-film transistor memory with atomic-layer-deposited Al{sub 2}O{sub 3}/Pt nanocrystals/Al{sub 2}O{sub 3} gate stack

Amorphous indium-gallium-zinc oxide (a-IGZO) thin-film transistor (TFT) memory is very promising for transparent and flexible system-on-panel displays; however, electrical erasability has always been a severe challenge for this memory. In this article, we demonstrated successfully an electrically programmable-erasable memory with atomic-layer-deposited Al{sub 2}O{sub 3}/Pt nanocrystals/Al{sub 2}O{sub 3} gate stack under a maximal processing temperature of 300 {sup o}C. As the programming voltage was enhanced from 14 to 19 V for a constant pulse of 0.2 ms, the threshold voltage shift increased significantly from 0.89 to 4.67 V. When the programmed device was subjected to an appropriate pulse under negative gate bias, it could return to the original state with a superior erasing efficiency. The above phenomena could be attributed to Fowler-Nordheim tunnelling of electrons from the IGZO channel to the Pt nanocrystals during programming, and inverse tunnelling of the trapped electrons during erasing. In terms of 0.2-ms programming at 16 V and 350-ms erasing at −17 V, a large memory window of 3.03 V was achieved successfully. Furthermore, the memory exhibited stable repeated programming/erasing (P/E) characteristics and good data retention, i.e., for 2-ms programming at 14 V and 250-ms erasing at −14 V, a memory window of 2.08 V was still maintained after 10{sup 3} P/E cycles, and a memory window of 1.1 V was retained after 10{sup 5} s retention time.

36 MATERIALS SCIENCE↗

Interference between Coulombic and CT-mediated couplings in molecular aggregates: H- to J-aggregate transformation in perylene-based π-stacks

The spectroscopic differences between J and H-aggregates are traditionally attributed to the spatial dependence of the Coulombic coupling, as originally proposed by Kasha. However, in tightly packed molecular aggregates wave functions on neighboring molecules overlap, leading to an additional charge transfer (CT) mediated exciton coupling with a vastly different spatial dependence. The latter is governed by the nodal patterns of the molecular LUMOs and HOMOs from which the electron (t{sub e}) and hole (t{sub h}) transfer integrals derive. The sign of the CT-mediated coupling depends on the sign of the product t{sub e}t{sub h} and is therefore highly sensitive to small (sub-Angstrom) transverse displacements or slips. Given that Coulombic and CT-mediated couplings exist simultaneously in tightly packed molecular systems, the interference between the two must be considered when defining J and H-aggregates. Generally, such π-stacked aggregates do not abide by the traditional classification scheme of Kasha: for example, even when the Coulomb coupling is strong the presence of a similarly strong but destructively interfering CT-mediated coupling results in “null-aggregates” which spectroscopically resemble uncoupled molecules. Based on a Frenkel/CT Holstein Hamiltonian that takes into account both sources of electronic coupling as well as intramolecular vibrations, vibronic spectral signatures are developed for integrated Frenkel/CT systems in both the perturbative and resonance regimes. In the perturbative regime, the sign of the lowest exciton band curvature, which rigorously defines J and H-aggregation, is directly tracked by the ratio of the first two vibronic peak intensities. Even in the resonance regime, the vibronic ratio remains a useful tool to evaluate the J or H nature of the system. The theory developed is applied to the reversible H to J-aggregate transformations recently observed in several perylene bisimide systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Material characteristics and equivalent circuit models of stacked graphene oxide for capacitive humidity sensors

The oxidation properties of graphene oxide (GO) are systematically correlated with their chemical sensing properties. Based on an impedance analysis, the equivalent circuit models of the capacitive sensors are established, and it is demonstrated that capacitive operations are related to the degree of oxidation. This is also confirmed by X-ray diffraction and Raman analysis. Finally, highly sensitive stacked GO sensors are shown to detect humidity in capacitive mode, which can be useful in various applications requiring low power consumption.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Solid-state dewetting of single- and bilayer Au-W thin films: Unraveling the role of individual layer thickness, stacking sequence and oxidation on morphology evolution

Self-assembly of ultrathin Au, W, and Au-W bilayer thin films is investigated using a rapid thermal annealing technique in an inert ambient. The solid-state dewetting of Au films is briefly revisited in order to emphasize the role of initial film thickness. W films deposited onto SiO{sub 2} evolve into needle-like nanocrystals rather than forming particle-like agglomerates upon annealing at elevated temperatures. Transmission electron microscopy reveals that such nanocrystals actually consist of tungsten (VI) oxide (WO{sub 3}) which is related to an anisotropic oxide crystal growth out of the thin film. The evolution of W films is highly sensitive to the presence of any residual oxygen. Combination of both the dewetting of Au and the oxide crystal growth of WO{sub 3} is realized by using various bilayer film configurations of the immiscible Au and W. At low temperature, Au dewetting is initiated while oxide crystal growth is still suppressed. Depending on the stacking sequence of the Au-W bilayer thin film, W acts either as a substrate or as a passivation layer for the dewetting of Au. Being the ground layer, W changes the wettability of Au which clearly modifies its initial state for the dewetting. Being the top layer, W prevents Au from dewetting regardless of Au film thickness. Moreover, regular pattern formation of Au-WO{sub 3} nanoparticles is observed at high temperature demonstrating how bilayer thin film dewetting can create unique nanostructure arrangements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sub-10 nm low current resistive switching behavior in hafnium oxide stack

In this letter, a tip-induced cell relying on the conductive atomic force microscope is proposed. It is verified as a referable replica of an integrated resistive random access memory (RRAM) device. On the basis of this cell, the functionality of sub-10 nm resistive switching is confirmed in hafnium oxide stack. Moreover, the low current switching behavior in the sub-10 nm dimension is found to be more pronounced than that of a 50 × 50 nm{sup 2} device. It shows better ON/OFF ratio and low leakage current. The enhanced memory performance is ascribed to a change in the shape of the conductive filament as the device dimensions are reduced to sub-10 nm. Therefore, device downscaling provides a promising approach for the resistance optimization that benefits the RRAM array design.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of impurity doping on tunneling conductance in AB-stacked bi-layer graphene: A tight-binding study

We report here a microscopic tight-binding model calculation for AB-stacked bilayer graphene in presence of biasing potential between the two layers and the impurity effects to study the evolution of the total density of states with special emphasis on opening of band gap near Dirac point. We have calculated the electron Green’s functions for both the A and B sub-lattices by Zubarev technique. The imaginary part of the Green’s function gives the partial and total density of states of electrons. The density of states are computed numerically for 1000 × 1000 grid points of the electron momentum. The evolution of the opening of band gap near van-Hove singularities as well as near Dirac point is investigated by varying the different interlayer hoppings and the biasing potentials. The inter layer hopping splits the density of states at van-Hove singularities and produces a V-shaped gap near Dirac point. Further the biasing potential introduces a U shaped gap near Dirac point with a density minimum at the applied potential(i.e. at V/2).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Microscopic theoretical model study of band gap opening in AA-stacked bi-layer graphene

We address here a tight-binding theoretical model calculation for AA-stacked bi-layer graphene taking into account of a biased potential between two layers to study the density of states and the band dispersion within the total Brillouin zone. We have calculated the electronic Green’s function for electron operator corresponding to A and B sub lattices by Zubarev’s Green’s function technique from which the electronic density of states and the electron band energy dispersion are calculated. The numerically computed density of states and band energy dispersions are investigated by tuning the biased potential to exhibit the band gap by varying the different physical parameters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗