Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Surface stoichiometry and activity control for atomically smooth low dislocation density ZnO and pseudomorphic MgZnO epitaxy on a Zn-polar ZnO substrate by the helicon-wave-excited-plasma sputtering epitaxy method

The helicon-wave-excited-plasma sputtering (HWPS) method was exemplified to be one of the versatile epitaxial growth techniques for the fabrication of low dislocation density semiconductor epilayers and heterostructures exhibiting atomically smooth surface morphology. For a case study, ZnO homoepitaxy and Mg{sub x}Zn{sub 1-x}O (x=0.08,0.19) heteroepitaxy on a Zn-polar ZnO substrate were carried out. According to the surface damage-free property, high temperature growth with appropriate stoichiometry control enabled the growth of ZnO homoepitaxial layers exhibiting a smooth surface morphology with 0.26 nm high monolayer atomic steps. Their tilt and twist mosaics reflecting the threading dislocation densities having screw and edge components were comparable to those of the substrate, being under the resolution limit (18 arcsec). The surface morphology and crystal mosaicity of pseudomorphic Mg{sub x}Zn{sub 1-x}O (x{<=}0.19) epilayers were quite similar to those of the ZnO underlayer. The luminescence spectra of the ZnO and Mg{sub x}Zn{sub 1-x}O epilayers at 293 K exhibited a predominant near-band-edge emission and negligible broad emission bands due to deep levels. The results indicate that the growth mode of the HWPS method resembles that of molecular beam epitaxy methods.

36 MATERIALS SCIENCE↗

Spatial and temporal evolution of ion energies in high power impulse magnetron sputtering plasma discharge

High power impulse magnetron sputtering (HIPIMS) is a novel deposition technology successfully implemented on full scale industrial machines. HIPIMS utilizes short pulses of high power delivered to the target in order to generate high amount of metal ions. The life-span of ions between the pulses and their energy distribution could strongly influence the properties and characteristics of the deposited coating. In modern industrial coating machines the sample rotates on a substrate holder and changes its position and distance with regard to the magnetron. Time resolved measurements of the ion energy distribution function (IEDF) at different distances from the magnetron have been performed to investigate the temporal evolution of ions at various distances from target. The measurements were performed using two pressures, 1 and 3 Pa to investigate the influence of working gas pressure on IEDF. Plasma sampling energy-resolved mass spectroscopy was used to measure the IEDF of Ti{sup 1+}, Ti{sup 2+}, Ar{sup 1+}, and Ar{sup 2+} ions in HIPIMS plasma discharge with titanium (Ti) target in Ar atmosphere. The measurements were done over a full pulse period and the distance between the magnetron and the orifice of the mass spectrometer was changed from 25 to 215 mm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The influence of sputtering power and O{sub 2}/Ar flow ratio on the performance and stability of Hf-In-Zn-O thin film transistors under illumination

The performance and stability of amorphous HfInZnO thin film transistors under visible light illumination were studied. The extent of device degradation upon negative bias stress with the presence of visible light is found to be strongly sensitive to the extent of photoelectric effect in the oxide semiconductor. Highly stable devices were fabricated by optimizing the deposition conditions of HfInZnO films, where the combination of high sputtering power and high O{sub 2}/Ar gas flow ratio was found to result in the highest stability under bias stress experiments.

36 MATERIALS SCIENCE↗

Structural and electrical characteristics of high quality (100) orientated-Zn{sub 3}N{sub 2} thin films grown by radio-frequency magnetron sputtering

We report on highly crystalline zinc nitride (Zn{sub 3}N{sub 2}) thin films which were grown by rf magnetron sputtering on quartz substrates. The substrate temperature during growth is found to strongly affect the crystal quality of the thin films. The chemical bonding states were determined by x-ray photoelectron spectroscopy. Large chemical shifts in core-level N 1s peaks with binding energy of 396.4 eV were observed as compared to N 1s of free amine (398.8 eV), indicating Zn-N bond formation. Two N 1s states were found: one is N{sub 1} formed by Zn-N bonds and another is (N{sub 2}) produced by substitution of N molecules at N ion sites, which leads to larger lattice constants, consistent with x-ray diffraction results. Temperature-dependent Hall effect measurements of our Zn{sub 3}N{sub 2} films exhibited distinct conduction mechanisms at specific different temperature ranges.

36 MATERIALS SCIENCE↗

Optical function evolution of ion-assisted ZrN films deposited by sputtering

The optical functions (complex dielectric function, complex index of refraction, and complex conductivity) of sputtered zirconium nitride films are derived starting from optical reflectance measurements. Their evolution with the different bias voltages applied during the films growth is used to deduce information about the variations in the electronic structure influenced by a different oxygen and nitrogen content in the films. Improvement in the electrical conductivity is observed at increasing bias voltage due to a reduction in both oxygen contamination and nitrogen content. The separation of the different contributions (free conduction electrons and different electronic transitions) in the optical functions is achieved through the Drude-Lorentz model, allowing the detection of an unusual low-energy electronic transition in films grown at low bias voltages. Through considerations about the electronic structure and about the results coming from other characterization techniques, this transition can be ascribed to the presence of defects/impurities, nitrogen superstoichiometry, or oxygen contamination.

36 MATERIALS SCIENCE↗

Multilayered Al/CuO thermite formation by reactive magnetron sputtering: Nano versus micro

Multilayered Al/CuO thermite was deposited by a dc reactive magnetron sputtering method. Pure Al and Cu targets were used in argon-oxygen gas mixture plasma and with an oxygen partial pressure of 0.13 Pa. The process was designed to produce low stress (<50 MPa) multilayered nanoenergetic material, each layer being in the range of tens nanometer to one micron. The reaction temperature and heat of reaction were measured using differential scanning calorimetry and thermal analysis to compare nanostructured layered materials to microstructured materials. For the nanostructured multilayers, all the energy is released before the Al melting point. In the case of the microstructured samples at least 2/3 of the energy is released at higher temperatures, between 1036 and 1356 K.

36 MATERIALS SCIENCE↗

Photoluminescence of as-grown and thermal annealed SiO{sub x}/Si-nanocrystals heterolayers grown by reactive rf sputtering

SiO{sub x}/Si-nanocrystals (Si NCs) heterolayers were fabricated employing a rf magnetron sputtering system. The synthesis process, through modification of the oxygen partial pressure of the plasma, promotes the synthesis of stoichiometric SiO{sub 2} layers and affect the Si NCs layer giving place to SiO{sub x}/Si NCs (1.64<x<2) interfaces. All as-grown samples showed strong photoluminescence (PL) bands in the visible and near-infrared regions; transmission electron microscopy measurements confirmed the presence of Si NCs. Thermal annealing at 1100 deg. C promoted the SiO{sub 2} stoichiometry in the interface and the crystallization of more Si NCs. The results allow us to clearly identify the origin of the PL bands; indicating that the near-infrared emission is related to the nonstoichiometric oxide while the red and green bands are originated in Si NCs.

36 MATERIALS SCIENCE↗

Effect of Reactive Sputtering Parameters on TiAlN Nanocoating Structure and Morphology

The effect of substrate bias and nitrogen flow rate on the TiAlN nanocoating structure and morphology has been investigated by using reactive unbalance DC magnetron sputtering. TiAlN nanocoating was deposited on the tungsten carbide insert tool and the structure and morphology were characterized by using XRD and AFM, respectively. The substrate bias was varied between 0 to -221 V and the nitrogen flow rate was varied between 30 to 72 sccm. The results showed that the structure of TiAlN nanocoating consisted of mainly (111) and (200) plane. The structure was significatly influenced by substrate bias in promoting finer crystal size and increased crystal plane spacing while the rms roughness of nanocoating was influenced by substrate bias and nitrogen flow rate.

36 MATERIALS SCIENCE↗

Optical absorption at its onset in sputter deposited hafnia-titania nanolaminates

The onset of the fundamental optical absorption edge in sputter deposited HfO{sub 2}-TiO{sub 2} nanolaminate films grown on unheated substrates was investigated. Three bilayer architectures were examined, representing overall film chemistry from 0.51 to 0.72 atom fraction Hf. The goal was to determine the absorption coefficient, {alpha}(E), versus incident photon energy, E, and to model this dependence in terms of the absorption behavior of specific functional units within the nanolaminate. Persistence and amalgamation models were applied, representing the extremes of segregated cation and mixed cation structures, respectively, and both were found to be unsatisfactory. Consideration of physiochemical data for the nanolaminates led to the development of a modified persistence model for absorption. {alpha}(E) was decomposed into contributions from (I) broad (9 nm-thick) interfacial regions that were chiefly o-HfTiO{sub 4}, and (II) regions remote from interfaces that contained material based on a highly defective m-HfO{sub 2} lattice. The absorption edge at its onset in all nanolaminates was determined by short-range atomic order characteristic of o-HfTiO{sub 4}. An indirect band gap of E{sub G}=3.25{+-}0.02 eV was determined for this compound.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ion acceleration and cooling in gasless self-sputtering

Copper plasma with hyperthermal directed velocity (8.8 eV) but very low temperature (0.6 eV) has been obtained using self-sputtering far above the runaway threshold. Ion energy distribution functions (IEDFs) were simultaneously measured at 34 locations. The IEDFs show the tail of the Thompson distribution near the magnetron target. They transform to shifted Maxwellians with the ions being accelerated and cooled. We deduce the existence of a highly asymmetric, pressure-driven potential hump which acts as a controlling"watershed" between the ion return flux and the expanding plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electrochemical Performance of rf Magnetron Sputtered LiCoO{sub 2} Thin Film Positive Electrodes

Thin films of LiCoO{sub 2} were grown by rf magnetron sputtering technique and studied the influence of In situ annealing treatment on microstructural and electrochemical properties of the films. Annealing treatment in presence of O{sub 2} ambient develops characteristic (104) plan in relative to (003) plane texture indicating that the films have HT-layered structure with R3-bar m symmetry. The effect is discussed in terms of grain size, cycling stability, reversibility and the specific discharge capacity.

36 MATERIALS SCIENCE↗

Fabrication of L1{sub 0}-ordered FePt granular media using an in-line sputtering system

FePtAg-SiO{sub 2} granular films were fabricated using an in-line sputtering system with a composite alloy target. Two heating methods were investigated in consideration of practical manufacturing processes. Structural analyses showed that the FePtAg-SiO{sub 2} film had better L1{sub 0} ordered structure and clearer grain boundaries when deposited on the preheated substrate than when annealed after deposition. Adding Ag improved both the L1{sub 0} ordering and the face centered tetragonal (001) texture. Torque magnetometry indicated that the FePtAg-SiO{sub 2} film had a uniaxial perpendicular anisotropy of 1.4 x 10{sup 7} (erg/cc) at an ordering parameter S of 0.72.

36 MATERIALS SCIENCE↗

Physical Ion Sputtering At Glancing Angles As A Novel IC De-processing Technique

Failure analysis (de-processing) techniques are becoming more and more important in tackling integrated circuits (IC) process-related problems. Particularly, failure analysis of ICs requires opening and de-layering a chip in a layer by layer mode in order to find hidden defects. Selective chemical etching, reactive ion etching, plasma etching and chemical mechanical polishing or a combination of these techniques are traditionally used for de-processing of IC. In this work a novel technique which is physical ion sputtering at glancing incidence angles allowing precise information about possible reasons of IC failures occurring at different steps of IC processing is proposed.

36 MATERIALS SCIENCE↗

Ohmic contact properties of magnetron sputtered Ti{sub 3}SiC{sub 2} on n- and p-type 4H-silicon carbide

Epitaxial Ti{sub 3}SiC{sub 2} (0001) thin film contacts were grown on doped 4H-SiC (0001) using magnetron sputtering in an ultra high vacuum system. The specific contact resistance was investigated using linear transmission line measurements. Rapid thermal annealing at 950 deg. C for 1 min of as-deposited films yielded ohmic contacts to n-type SiC with contact resistances in the order of 10{sup -4} {Omega} cm{sup 2}. Transmission electron microscopy shows that the interface between Ti{sub 3}SiC{sub 2} and n-type SiC is atomically sharp with evidence of interfacial ordering after annealing.

36 MATERIALS SCIENCE↗

Cyclic nanoindentation studies on CrN thin films prepared by RF sputtering on Zr-based metallic glass

Cyclic nanoindentation tests were carried out to study the influence of the chromium nitride thin films on the mechanical properties of Zr-based metallic glass. Chromium nitride thin coatings have been deposited on Zr{sub 50}Cu{sub 40}Al{sub 10} metallic glass substrate by RF sputtering. The deposition process was done at room temperature under nitrogen reactive gas using a metallic chromium target. The CrN films have a thickness of 300 nm. Several cyclic nanoindentation measurements were conducted on CrN films and Zr{sub 50}Cu{sub 40}Al{sub 10} metallic glass substrate samples at various loading rate values. We have found that the coated metallic glass sample shows high mechanical properties such as hardness and reduced elastic modulus. Cyclic nanoindentation results show a hardening behaviour for these CrN coatings. Moreover, the CrN coated on Zr-based metallic glass was found to have a high value of resistance to crack propagation, as being analysed through the SEM pictures of the residual Vickers indentation impressions.

36 MATERIALS SCIENCE↗

Dot arrays of L1{sub 0}-type FePt ordered alloy perpendicular films fabricated using low-temperature sputter film deposition

Using ultrahigh vacuum sputter film deposition, we fabricated L1{sub 0}-type Fe{sub 50}Pt{sub 50} ordered alloy perpendicular films on MgO(001) single-crystal substrates and 2.5 in. glass disks at low substrate temperatures of 200-350 deg. C. Then we examined the magnetic properties of the dot arrays made from these films. The uniaxial magnetic anisotropy K{sub u} for L1{sub 0}-type FePt films (10 nm in thickness) deposited with a Pd underlayer on MgO(001) substrates reached about 2 x 10{sup 7} erg/cm{sup 3} at the substrate temperature T{sub s} of 200 deg. C, and 3 x 10{sup 7} erg/cm{sup 3} at T{sub s} = 250 deg. C. The order parameter S was about 0.46 at T{sub s} = 300 deg. C. Moreover, K{sub u} for L1{sub 0}-FePt films fabricated on glass disks using MgO/Cr underlayers shows 3.4 x 10{sup 7} erg/cm{sup 3} at T{sub s} = 300 deg. C, which was almost equal to that for FePt single-crystal films deposited on Pd/MgO(001). The switching field distribution {sigma}/H{sub c} for dot arrays made from L1{sub 0}-FePt film [5 nm in thickness, on Pd/MgO(001) at T{sub s} = 250 deg. C] was small; {sigma}/H{sub c}= 0.11 for a dot diameter of 15 nm. This value was smaller than that of hcp-Co{sub 75}Pt{sub 25} dot arrays ({sigma}/H{sub c} = 0.18). The difference was mainly attributable to the degree of the easy axis distribution. This result demonstrates the homogeneous formation of a L1{sub 0}-type ordered structure in the FePt layers.

36 MATERIALS SCIENCE↗

FePt:C/Fe graded and nongraded films with controllable coercivity fabricated by magnetron sputtering and postannealing

Graded and nongraded FePt:C(hard)/Fe(soft) films with different structures are fabricated by magnetron sputtering and postannealing. Due to the interdiffusion between FePt and C layers during the annealing process, films with a continuous variation in anisotropy are realized by varying the C concentration in the FePt hard layer. In comparison to the FePt/Fe bilayer, the coercivities of graded and nongraded films are effectively reduced. However, the mechanisms of reduction are different. Moreover, adding a nonmagnetic C layer not only tailors the gradient of anisotropy, but also weakens the intergranular exchange interaction.

36 MATERIALS SCIENCE↗

Acceleration of ordering transformation of a new Fe{sub 2}(Mn,Cr)Si Heusler-alloy film by very high frequency plasma irradiation process during radio frequency sputter deposition

A new Heusler alloy, Fe{sub 2}(Mn,Cr)Si, that is likely to have high spin polarization (P) and high damping constant ({alpha}) was proposed to obtain high magneto-resistance ratio and low spin torque noise in a magnetic read head with a current-perpendicular-to-plane (CPP) giant magneto-resistance (GMR) multilayer. A very high frequency (VHF) plasma irradiation process during radio frequency (RF) sputter deposition was investigated to form the highly ordered structure of the Heusler alloy film with low thermal treatment temperature. The main results are as follows: (1) P and magnetic moment of Fe{sub 2}(Mn{sub 0.5}Cr{sub 0.5})Si with an L2{sub 1} structure were estimated at 0.99 and 2.49 {mu}{sub B}/f.u., respectively, and {alpha} was also estimated to be larger compared with the case of Co{sub 2}MnSi, according to density of states (DOS) calculations. (2) The ordering (at least B2 structure) temperature of Fe{sub 2}(Mn{sub 0.6}Cr{sub 0.4})Si film decreased from 500 to 300 deg. C by using the VHF plasma irradiation process with optimized condition. (3) The surface roughness of Fe{sub 2}(Mn{sub 0.6}Cr{sub 0.4})Si film also reduced from 1.7 to 0.5 nm by using the VHF plasma irradiation process. It is found that the Fe{sub 2}(Mn,Cr)Si Heusler alloy and the VHF plasma irradiation process with optimized condition seems to be applicable for fabrication of high-performance magnetic read head with CPP-GMR device.

36 MATERIALS SCIENCE↗