Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SEGREGATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Effect of secondary phase particles on thermal stability of ultra-fine grained Mg-4Y-3RE alloy prepared by equal channel angular pressing

Highlights: • UFG structure with grain size of ~340 nm was achieved in WE43 by ECAP. • Fine Mg{sub 5}RE particles are responsible for microstructural stability up to 280 °C. • Segregation of Y and RE solutes in grain boundaries was observed. • Hardening at 200–280 °C was observed due to segregation and precipitation. • Effect of particles dissolution and grain growth on softening was discussed. - Abstract: As-cast magnesium alloy WE43, containing yttrium and rare earth elements, was processed by equal channel angular pressing (ECAP). The processing led to a significant grain refinement together with a massive precipitation of the secondary phase particles. Thermal stability of the ultra-fine grain (UFG) structure together with microstructural changes due to exposure to elevated temperatures were studied by several complementary techniques in the temperature range of 160–500 °C. It was found that UFG structure consisting of grains with size of ~340 nm and high density of Mg{sub 5}RE particles is stable up to 280 °C for 1 h of annealing. Moreover, only negligible change of the microstructure occurred after annealing for 16 h at 250 °C. Excellent thermal stability of UFG structure was caused by fine Mg{sub 5}RE particles, which suppressed the grain growth. Exceeding the limit of thermal stability of these particles above 280 °C resulted in material softening. Moreover, statistically significant hardening of the UFG material occurred in the temperature range of 200–280 °C. Segregation of yttrium and rare earth elements and eventually precipitation at grain boundaries was proved to be responsible for observed hardening by in-situ and ex-situ transmission electron microscope and positron annihilation spectroscopy analysis. Finally, individual effect of particles dissolution and grain growth on the material softening was investigated and discussed.

36 MATERIALS SCIENCE↗

Influence of surface relaxation on solute atoms positioning within atom probe tomography reconstructions

Highlights: • APT measurement of Al/Cu alloy is simulated with a combined electrostatics and molecular dynamics (MD) approach. • Results show segregation of dilute Cu at [111] poles in correspondence to experimental measurements. • No temperature is involved. The effect originates in both disparate evaporation field and bond-energies in the alloy. While thermal or field-induced surface migration has been invoked often in past literature to rationalize the experimental observations of solute and impurity atoms segregation to specific poles and zones lines in atom probe tomography (APT) reconstructions, it does not satisfactorily explain all experimental results. Using a combined finite-element and molecular dynamics simulation approach that models the field evaporation process from mechanically relaxed emitter structures, we show that an additional mechanism, athermal relaxation, can also drive significant solute migration. The mechanism is illustrated for Cu in solid solution in Al, which exhibits segregation of Cu to 111 poles and along [110] zone lines in reconstructed APT data. The higher bonding energy of Cu atoms on the surface, confirmed using density-functional theory calculations, causes longer retention on the surface and preferential evaporation of neighboring Al atoms with subsequent athermal relaxation of Cu into higher-neighbor-count sites left vacant by evaporating Al neighbors. This in turn results in barrier-free long-range migration of the Cu atoms by a series of relaxation events that follow the receding terrace ledges towards high-neighbor count poles and zone lines. This mechanism fundamentally limits spatial resolution in the limit of zero temperature.

36 MATERIALS SCIENCE↗

Anticipating impacts of introducing aluminum-cerium alloys into the United States automotive market

Increasing demand of abundant co-product rare earths such as cerium and lanthanum has become a focus for improving mine economics. The recent development of an aluminum-cerium (Al-Ce) alloy targeted toward broad market adoption in the automotive industry is one recent example. This alloy has shown exceptional mechanical properties and cost-saving potential. However, since market adoption is unknown, impacts of this alloy on Ce demand remains uncertain. We estimate Al-Ce impacts by simulating adoption in different automotive sectors using a dynamic material flow analysis model. We then project future Ce content in the recycled Al stream given current recycling practices. We also compute the required segregation given different Ce impurity tolerances of existing automotive Al alloys. Finally, once secondary supply is derived from segregation, we calculate primary Ce demand. Results showed that segregation of Al-Ce components from non-AlCe automotive Al components is needed for most adoption scenarios and impurity thresholds. Ce metal demand was found to be lowest at 1000 mt/yr if the target market is light duty trucks. If Al-Ce could penetrate the High Efficiency Spark Ignition market (i.e., turbocharger market), Ce demand could reach 23,200 mt Ce/year in 2045, without accounting for Chinese and Australian Ce primary production capacity. Furthermore, when accounting for primary Ce production capacity, demand could reach up to 16,200 mt/yr.

99 GENERAL AND MISCELLANEOUS↗

The physical origin of heterogeneous solute clustering and nanoprecipitation at grain boundaries in ultrafine-grained immiscible alloys

Here, grain-boundary segregation effects on heterogeneous solute clustering and nanoprecipitation at low solute concentrations were investigated in sputter-deposited ultrafine-grained Ag-Cu alloy films. X-ray diffraction and scanning transmission electron microscopy revealed extended solubility of Cu in Ag matrix, accompanied by the formation of Cu-rich nanoprecipitates and solute clusters at grain boundaries and their junctions. Atomistic simulations further demonstrated that Cu solutes heterogeneously segregate to Ag GBs and form small clusters that grow into nuclei for Cu nanoprecipitates. These findings provide critical insights into the role of heterogeneous grain-boundary segregation in governing the phase separation pathways of immiscible nanocrystalline and ultrafine-grained alloys.

Heterogeneous segregation↗

Czochralski Growth and Characterization of a Compositionally Complex Rare Earth Aluminum Garnet Scintillator: (Gd 1/4 Y 1/4 Tb 1/4 Lu 1/4 ) 3 Al 5 O 12 :Ce

Compositionally complex oxides have garnered increasing interest for their enhanced phase stability and tunable functional properties, yet their development as bulk single crystal scintillators remains limited. Herein, we report the Czochralski growth and characterization of (Gd 1/4 Y 1/4 Tb 1/4 Lu 1/4 ) 3 Al 5 O 12 :Ce (GYTLAG), a compositionally complex garnet incorporating four dodecahedrally coordinated principal rare earth elements. The garnet phase was confirmed by powder and single crystal X-ray diffraction, and macroscopic defects are described. X-ray absorption near-edge structure measurements confirm the 3+ oxidation state of all rare earths and support their occupation of the same crystallographic site; white line intensity variations correlate with the anticipated segregation behavior. Elemental segregation is quantified by SEM/EDS and ICP-OES, and a linear trend was established between the segregation coefficient and the difference between each rare earth’s ionic radius (r) and the average ionic radius (AIR) of the dodecahedral site. This trend offers a predictive framework for compositional control in future REAG crystals grown by the Czochralski method. Photoluminescence and radioluminescence measurements reveal both Ce 3+ and Tb 3+ emission. Scintillation pulses exhibit four-component decay with dominant ~230 µs and ~1.2 ms components, and the light yield is estimated to be up to 43,000 ph/MeV under 137Cs γ-ray excitation. GYTLAG also demonstrates a strong radioluminescence efficiency and 50% lower afterglow at 20 ms compared to a LuAG:Ce reference, underscoring its promise for scintillator applications.

Compositionally complex oxide, high entropy oxide,↗

Cu–Ni Oxidation Mechanism Unveiled: A Machine Learning-Accelerated First-Principles and in Situ TEM Study

Here, the development of accurate methods for determining how alloy surfaces spontaneously restructure under reactive and corrosive environments is a key, long-standing, grand challenge in materials science. Using machine learning-accelerated density functional theory and rare-event methods, in conjunction with in situ environmental transmission electron microscopy (ETEM), we examine the interplay between surface reconstructions and preferential segregation tendencies of CuNi(100) surfaces under oxidation conditions. Our modeling approach predicts that oxygen-induced Ni segregation in CuNi alloys favors Cu(100)-O c(2 × 2) reconstruction and destabilizes the Cu(100)-O (2√2 × √2)R45° missing row reconstruction (MRR). In situ ETEM experiments validate these predictions and show Ni segregation followed by NiO nucleation and growth in regions without MRR, with secondary nucleation and growth of Cu 2 O in MRR regions. Our approach based on combining disparate computational components and in situ ETEM provides a holistic description of the oxidation mechanism in CuNi, which applies to other alloy systems.

36 MATERIALS SCIENCE↗

Exotic Long-Range Surface Reconstruction on La 0.7 Sr 0.3 MnO 3 Thin Films

Due to an extremely diverse phase space, La 1–x Sr x MnO 3 , as with other manganites, offers a wide range of tunability and applications including colossal magnetoresistance and use as spin-polarized electrodes. Here, we study an unprecedented, exotic surface reconstruction (6 × 6) in La 1–x Sr x MnO 3 (x = 0.3) observed via low-energy electron diffraction (LEED). Scanning tunneling microscopy (STM) shows the surface is relatively flat, with unit-cell step heights, and X-ray photoelectron spectroscopy (XPS) reveals a strong degree of Sr segregation at the surface. By combining electron diffraction and first-principles computations, we propose that the long-range surface reconstruction consists of a Sr-segregated surface with La (6 × 6) ordering. This study expands our understanding of manganite systems and underscores their ability to form interesting surface reconstructions, driven largely by cation segregation that can potentially be controlled for tuning surface ordering.

36 MATERIALS SCIENCE↗

Halogen Redox Shuttle Explains Voltage-Induced Halide Redistribution in Mixed-Halide Perovskite Devices

Voltage-induced halide segregation greatly limits the optoelectronic applications of mixed-halide perovskite devices, but a mechanistic explanation behind this phenomenon remains unclear. In this work, we use electron microscopy and elemental mapping to directly measure the halide redistribution in mixed-halide perovskite solar cells with quasi-ion-impermeable contact layers under different bias polarities to find iodide and bromide accumulation at the cathode and anode, respectively. This is consistent with a mechanism based on preferential iodide oxidation at the anode, leading to unbalanced I$^{+}_{i}$, I$^{-}_{X}$, and Br$^{-}_{X}$ fluxes. Importantly, switching the anode from "inert" Au to "active" Ag prevents segregation because Ag oxidation precludes the oxidation of lattice iodide, which suggests employing redox-active additives as a general strategy to suppress halide segregation. Finally, these results show that halide perovskite devices operate as solid-state electrochemical cells when threshold voltages are exceeded, providing fresh insight to understand the impacts of voltage bias on halide perovskite devices.

14 SOLAR ENERGY↗

Enabling Nanoparticle Networking in Semicrystalline Polymer Matrices

Among the physical and chemical attributes of the nanocomposite components and their interactions that contribute to the ultimate material properties, nanoparticle arrangement in the matrix is a key contributing factor that has been targeted through materials choices and processing strategies in numerous previous studies. Often, the desired nanocomposite morphology contains individually dispersed and distributed nanoparticles. In this research, a phase-segregated morphology containing nanoparticle networks was studied. A model nanocomposite system composed of calcium phosphate nanoparticles and a poly(3-hydroxybutyrate) matrix was produced to understand how polymer crystallization and crystal structure can facilitate the formation of a phase-segregated morphology containing nanoparticle networks. Two chemically similar calcium phosphate nanoparticle systems with different shapes, near-spherical and nanofiber, were synthesized for use in the nanocomposites. The different shapes were used independently in nanocomposites in an attempt to understand the effect of the nanoparticle shapes on crystallization-mediated nanoparticle network formation. The resulting nanocomposites were characterized to establish the effects of component interactions on the polymer structure. Additionally from the viscoelastic properties, structure-property relationships in these materials can be defined as a function of nanoparticle shape and concentration. The results of this research suggest that when the nanocomposite components are not strongly interacting, polymer crystallization may be used as a forced assembly method for nanoparticle networks. Such a methodology has applications to the design of functional polymer nanocomposites such as biomedical implant materials and organic photovoltaic materials where judicious choice of nanoparticle-polymer pairs and control of polymer crystal nucleation and growth processes could be used to control the length scale of phase segregation.

36 MATERIALS SCIENCE↗

Atomistic modeling of ultra-thin surface oxide growth on a ternary alloy : oxidation of Al-Ni-Fe.

By employing variable-charge molecular dynamics, surface oxide film growth on aluminum-nickel-iron alloys has been studied at 300 and 600 K. The dynamics of oxidation and oxide growth is strongly dependent on the composition of the initial alloy and the ambient temperature. Higher content of Ni and Fe in Al alloys is found to reduce the oxide growth kinetics; 15% Ni + 15% Fe Al alloy yielded 30-40% less growth at 400 ps oxygen exposure compared to pure Al. We observe dopant segregation, which disrupts the interaction between O atoms and Al atoms in the alloy, leading to a nonlinear oxide growth profile in the case of ternary Al-Ni-Fe alloy. Compared to oxidation at 300 K, 30% more oxide layer was yielded at 600 K, due to the elevated temperature. The simulated oxide kinetics indicates that the growth rate of anion surpasses the cation rate with higher sensitivity to the stoichiometry of the base metal substrate. Charge state analysis provides insights into the evolution of cation and anion species as the oxide layer grows. In particular, due to higher correlation, Fe shows a high rate of oxidation when the content is high, whereas the rate of Ni oxidation is consistently low. Density profile analysis suggests the segregation of dopant atoms below the growing ultrathin oxide layer, showing the presence of a layer-by-layer mode of oxide layer even with disordered structure. Coordination number (Z, the number of oxygen atoms around an aluminum atom) of aluminum oxide has been used to identify how the initial oxidation transitions into equilibrated states. Z = 3 is dominant in the early stages of oxidation and at the interface between oxide and bulk substrate, but it transitions quickly to Z = 4 (45%) and 5 (35%) as the oxide equilibrates and approaches its self-limiting thickness. Even though growth kinetics is dependent on the base metal stoichiometry, the composition of the oxide microstructure is not significantly affected, primarily segregating dopant elements, i.e., Ni and Fe outside of the oxide layer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-principles insights into chromium-induced oxide phases in NiO

The high-temperature oxidation of Ni–Cr alloys leads to complex oxide scales comprising Ni(Cr)O solid solutions, NiCr 2 O 4 spinel, and Cr 2 O 3 corundum within the NiO matrix. Understanding the atomic-scale mechanisms of Cr segregation and precipitate formation is crucial for enhancing oxidation resistance. Here, we employ density functional theory calculations to investigate Cr behavior on NiO(100), (110), and (111) surfaces and in the bulk. Our results reveal that isolated Cr atoms preferentially segregate to the surfaces, stabilizing Ni(Cr)O solid solutions via strong Cr–O bonding, whereas Cr pairs and clusters favor subsurface migration and bulk aggregation, promoting nucleation of NiCr 2 O 4 and Cr 2 O 3 phases. These findings elucidate a size-dependent segregation mechanism linking Cr coordination environments to oxide phase evolution. This atomic-scale insight informs strategies to tailor oxide microstructures and enhance the high-temperature oxidation resistance of Ni–Cr alloys.

Chromium Segregation↗

Wall Slip of Semi-Solid A356 in Couette Rheometers

Wall slip of suspensions in a couette rheometer is caused by segregation of a thin layer of liquid phase adjacent to the rheometer cylinder and cup, respectively. This causes the bulk phase to slide along the walls, which means that the fluid flow velocities respective to the walls are not zero. This affects the evaluation of the rheological properties and results in apparent flow curves. Despite of the importance of understanding and controlling segregation effects, little research has been done on this subject area. Indeed in industrial casting, the die filling behaviour, and therefore the product quality, may depend on the segregation phenomena. The wall slip occurring while investigating the semi-solid aluminium alloy A356 in a couette rheometer was investigated in the present work, employing the Kiljanski method. The goal of the present work was to obtain a true flow curve of the material, eliminating the effects of wall slip. Employing the method of Kiljanski, the wall slip velocity was calculated and subtracted from the apparent velocity of the alloy. Hence, the true shear rate in the medium and the true flow curve were estimated. The wall slip effect is assumed to be negligible in a couette system with a grooved rotational rod. This assumption was set to test by comparing the flow curve calculated from a system with grooved rotational rod with the flow curve calculated with the Kiljanski method. Both methods result in identical flow curves which can be assumed to be the physically correct one.

36 MATERIALS SCIENCE↗

Interactions of mobile helium clusters with surfaces and grain boundaries of plasma-exposed tungsten

We report results of atomistic computations for the interactions of small mobile helium clusters (He{sub n}) with free surfaces and grain boundaries (GBs) in tungsten toward development of continuum drift-diffusion-reaction models for the dynamics of mobile helium clusters in plasma-exposed tungsten. Molecular-statics (MS) simulations based on reliable many-body interatomic potentials are carried out for He{sub n} (1 ≤ n ≤ 7) clusters near sinks to obtain the potential energy profiles of the He{sub n} clusters as a function of the clusters' center-of-mass distance from a sink. Sinks investigated include surfaces, GBs, and regions in the vicinity of junctions where GBs intersect free surfaces. Elastic interaction potentials based on elastic inclusion theory provide an excellent description of the MS results for the cluster-sink interactions. The key parameter in the elastic models is the sink segregation strength, which is found to increase with increasing cluster size. Such cluster-sink interactions are responsible for the migration of small helium clusters by drift and for helium segregation on surfaces and grain boundaries in tungsten. Such helium segregation on sinks is observed in large-scale molecular-dynamics simulations of helium aggregation in model polycrystalline tungsten at 933 K upon helium implantation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Particle size effects in particle-particle triboelectric charging studied with an integrated fluidized bed and electrostatic separator system

Fundamental studies of triboelectric charging of granular materials via particle-particle contact are challenging to control and interpret because of foreign material surfaces that are difficult to avoid during contacting and measurement. The measurement of particle charge itself can also induce charging, altering results. Here, we introduce a completely integrated fluidized bed and electrostatic separator system that charges particles solely by interparticle interactions and characterizes their charge on line. Particles are contacted in a free-surface fluidized bed (no reactor walls) with a well-controlled fountain-like flow to regulate particle-particle contact. The charged particles in the fountain are transferred by a pulsed jet of air to the top of a vertically-oriented electrostatic separator consisting of two electrodes at oppositely biased high voltage. The free-falling particles migrate towards the electrodes of opposite charge and are collected by an array of cups where their charge and size can be determined. We carried out experiments on a bidisperse size mixture of soda lime glass particles with systematically varying ratios of concentration. Results show that larger particles fall close to the negative electrode and smaller particles fall close to the positive electrode, consistent with theory and prior experiments that larger particles charge positively and smaller particles charge negatively. The segregation of particles by charge for one of the size components is strongest when its collisions are mostly with particles of the other size component; thus, small particles segregate most strongly to the negative sample when their concentration in the mixture is small (and analogous results occur for the large particles). Furthermore, we find additional size segregation due to granular flow, whereby the fountain becomes enriched in larger particles as the smaller particles are preferentially expelled from the fountain.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Theoretical investigation of stabilities and optical properties of Si{sub 12}C{sub 12} clusters

By sorting through hundreds of globally stable Si{sub 12}C{sub 12} isomers using a potential surface search and using simulated annealing, we have identified low-energy structures. Unlike isomers knit together by Si–C bonds, the lowest energy isomers have segregated carbon and silicon regions that maximize stronger C–C bonding. Positing that charge separation between the carbon and silicon regions would produce interesting optical absorption in these cluster molecules, we used time-dependent density functional theory to compare the calculated optical properties of four isomers representing structural classes having different types of silicon and carbon segregation regions. Absorptions involving charge transfer between segregated carbon and silicon regions produce lower excitation energies than do structures having alternating Si–C bonding for which frontier orbital charge transfer is exclusively from separated carbon atoms to silicon atoms. The most stable Si{sub 12}C{sub 12} isomer at temperatures below 1100 K is unique as regards its high symmetry and large optical oscillator strength in the visible blue. Its high-energy and low-energy visible transitions (1.15 eV and 2.56 eV) are nearly pure one-electron silicon-to-carbon transitions, while an intermediate energy transition (1.28 eV) is a nearly pure carbon-to-silicon one-electron charge transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phosphorus and boron diffusion paths in polycrystalline silicon gate of a trench-type three-dimensional metal-oxide-semiconductor field effect transistor investigated by atom probe tomography

The dopant (P and B) diffusion path in n- and p-types polycrystalline-Si gates of trench-type three-dimensional (3D) metal-oxide-semiconductor field-effect transistors (MOSFETs) were investigated using atom probe tomography, based on the annealing time dependence of the dopant distribution at 900 °C. Remarkable differences were observed between P and B diffusion behavior. In the initial stage of diffusion, P atoms diffuse into deeper regions from the implanted region along grain boundaries in the n-type polycrystalline-Si gate. With longer annealing times, segregation of P on the grain boundaries was observed; however, few P atoms were observed within the large grains or on the gate/gate oxide interface distant from grain boundaries. These results indicate that P atoms diffuse along grain boundaries much faster than through the bulk or along the gate/gate oxide interface. On the other hand, in the p-type polycrystalline-Si gate, segregation of B was observed only at the initial stage of diffusion. After further annealing, the B atoms became uniformly distributed, and no clear segregation of B was observed. Therefore, B atoms diffuse not only along the grain boundary but also through the bulk. Furthermore, B atoms diffused deeper than P atoms along the grain boundaries under the same annealing conditions. This information on the diffusion behavior of P and B is essential for optimizing annealing conditions in order to control the P and B distributions in the polycrystalline-Si gates of trench-type 3D MOSFETs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Rapid assessment of interfacial stabilization mechanisms of metastable precipitates to accelerate high-temperature Al-alloy development

Precipitate strengthened high-temperature alloys are currently used in safety-critical applications. Understanding precipitate stability and solute segregation mechanisms at high temperatures is key to designing high-strength alloys. Rapid in-situ approaches, therefore, are pivotal in accelerating the alloy design process. Hereby using the test case of a promising high-temperature Al-Cu-Mn-Zr alloy, we demonstrate the value of in-situ atom probe tomography coupled with in-situ transmission electron microscopy to reveal atomic-scale mechanisms that lead to the emergence of non-equilibrium solute segregation. Mn and Zr segregation at strengthening precipitate(θ’)-matrix interface increases the kinetic barrier for phase transformation thus retaining high-temperature strength.

36 MATERIALS SCIENCE↗

ON THE DYNAMICAL FORMATION OF VERY YOUNG, X-RAY EMITTING BLACK HOLE BINARIES IN DENSE STAR CLUSTERS

We recently discovered a population of very young ({tau} {approx}< 6-8 Myr), X-ray emitting black hole binaries (BHBs) in the nearby starburst galaxy NGC 4449. These BHBs are located within or near to very young star clusters, indicating that they form within the clusters, but that some fraction are dynamically ejected. Here we present results from a suite of N-body simulations of N = 16,384 ({approx}6000 M{sub Sun }) star clusters, similar to the masses of BHB hosts in NGC 4449, through the first 10 Myr of their lives. Our goal is to determine whether dynamical interactions are responsible for the observed population of BHBs in NGC 4449. Our simulations span a wide range of initial size and density profiles, both with and without primordial mass segregation, testing both realistic initial conditions and extreme ones. We find that clusters without primordial mass segregation only dynamically produce BHBs within 10 Myr when they are extremely compact and centrally concentrated. Preliminary results that include primordial binaries support this conclusion. The introduction of strong primordial mass segregation, however, greatly increases the rapidity with which the binaries form, although these are still not tight enough that they will emit X-rays. We conclude that X-ray emitting BHBs are unlikely to form dynamically in clusters of this mass under realistic conditions. Instead, they probably originate from binaries that contain two massive stars with small orbital separations, which are present from the cluster's birth.

79 ASTRONOMY AND ASTROPHYSICS↗