Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SARS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Preliminary observations of Labrador Sea marginal ice zone rheology using C-band SAR

SAR imagery collected in the Labrador Sea during Limex '87 are used to interpret modes of sea-ice deformation. The ice canopy exhibited two distinct rheologies separated by a clear line of shear; a quasi-brittle inner regime and a nonlinear viscous outer regime. A single constitutive relation capable of modeling both is unlikely within a plastic rate-independent formulation. Rate dependent effects are discussed as an explanation for brittle fracture in ductile materials.

Drinkwater, Mark R.↗

Data compression for Eos on-board SAR processor

A lightweight, low-power, real-time data compressor design for the Earth Observing System (Eos) onboard synthetic aperture radar (SAR) processor is presented. The implementation is based on VLSI design of a pipelined binary tree-searched vector quantizer (VQ), utilizing space-qualifiable 1.25-micron CMOS technology. The implementation exploits VLSI system design principles such as the modularity, regular data flow, simple interconnection, localized communication, simple global control, and parallel/pipelined processing. The overall system requires 30 chips with only one VLSI processing element design. The total weight is about 1.2 lbs, with an estimated power dissipation of approximately 4 watts operating at the maximum input data rate. The projected throughput rate exceeds 5 MHz.

Chang, C. Y.↗

Integrated imaging experiment with C-SAR and other geological image data across the Nelson Front, Northern Manitoba

This paper presents preliminary results from the integration of geophysical and geological data sets using Bayesian statistical analysis with the purpose of mapping the Churchill-Superior Boundary zone. In the Wabowden area the contribution of each rock type to the aeromagnetic anomaly is judged by convolving the aeromagnetic anomaly value with the average magnetic susceptibility. The 'a posteriori' probabilities of significant patterns in the new data are then computed. The highest 'a posteriori' probability occurs along a narrow corridor whose trend coincides remarkably with the location of the Churchill-Superior Boundary Zone. In the Wekusko Lake area, C-SAR and TM data were integrated using an image analysis system. Here the emphasis is on mapping of geological structures.

Rao, G. S. K.↗

Multiple image SAR shape-from-shading

A technique for combining radar image shape-from-shading with stereo radargrammetry to produce terrain surface models using multiple SAR images is described. This technique is expected to be of use to reconstruct surface shape from Magellan images of planet Venus, and to refine the results of terrestrial radar measurements. Local variation in pixel shading is an indicator of terrain slope changes. This variation in pixel shading offers an opportunity for increasing the detail of terrain mapping over that which is available from stereo radargrammetry alone. Shape-from-shading can potentially provide a relative change in height at each pixel. This leads to a dense set of height measurements and a more faithful rendition of the local terrain shapes. However, shape-from-shading needs some type of boundary values or external terrain low-frequency information to succeed. These can be obtained from stereo or from altimeter measurements.

Thomas, J.↗

Acousto-Optical/Electronic Processor For SAR

Lightweight, compact, low-power apparatus processes synthetic-aperture-radar (SAR) returns in real time, providing imagery aboard moving aircraft or spacecraft platform. Processor includes optical and electronic subsystems that, together, resolve range and azimuth coordinates of radar targets by combination of spatial and temporal integrations.

Bicknell, T. J.↗

More About Calibration Of Polarimetric SAR

Azimuthal symmetry is not assumed. Two sets of equations and algorithms for radiometric and polarimetric calibration of complex quadpolarization data gathered by synthetic-aperture radar (SAR) based partly on known scattering characteristics of artificial targets in scene, and partly on assumption that all other targets scatter reciprocally.

Klein, Jeffrey D.↗

Accounting For Gains And Orientations In Polarimetric SAR

Calibration method accounts for characteristics of real radar equipment invalidating standard 2 X 2 complex-amplitude R (receiving) and T (transmitting) matrices. Overall gain in each combination of transmitting and receiving channels assumed different even when only one transmitter and one receiver used. One characterizes departure of polarimetric Synthetic Aperture Radar (SAR) system from simple 2 X 2 model in terms of single parameter used to transform measurements into format compatible with simple 2 X 2 model. Data processed by applicable one of several prior methods based on simple model.

Freeman, Anthony↗

SAR data compression: Application, requirements, and designs

The feasibility of reducing data volume and data rate is evaluated for the Earth Observing System (EOS) Synthetic Aperture Radar (SAR). All elements of data stream from the sensor downlink data stream to electronic delivery of browse data products are explored. The factors influencing design of a data compression system are analyzed, including the signal data characteristics, the image quality requirements, and the throughput requirements. The conclusion is that little or no reduction can be achieved in the raw signal data using traditional data compression techniques (e.g., vector quantization, adaptive discrete cosine transform) due to the induced phase errors in the output image. However, after image formation, a number of techniques are effective for data compression.

Curlander, John C.↗

Eutelsat 2: SAR-10009 nickel-hydrogen battery

The topics are presented in viewgraph form and include SAR-10009 design features, specific energy, analyses and testing, redundant structural insulation, electronics, corrosion protection, battery cell life cycle tests, and spacecraft launches.

Miller, Lee↗

The relationship between aboveground biomass and radar backscatter as observed on airborne SAR imagery

The initial results of an experiment to examine the dependence of radar image intensity on total above-ground biomass in a southern US pine forest ecosystem are presented. Two sets of data are discussed. First, we examine two L-band (VV-polarization) data sets which were collected 5 years apart. These data sets clearly illustrate the change in backscatter resulting from the growth of a young pine stand. Second, we examine the dependence between radar backscatter and biomass as a function of radar frequency using data from the JPL Airborne Synthetic Aperture Radar (AIRSAR) and ERIM/NADC P-3 SAR systems. These results show that there is a positive correlation between above-ground biomass and radar backscatter and at C-, L-, and P-bands, but very little correlation at C-band. The biomass level for which this positive correlation holds decreases as radar frequency increases. This positive correlation is stronger at HH and HV polarizations that VV polarization at L- and P-bands, but strongest at VV polarization for C-band.

Kasischke, Eric S.↗

Soil moisture measurements from airborne SAR

The preliminary results of algorithm development and testing for soil moisture retrieval at high incidence angles are reported. Based on first-order surface backscattering models, a physically based algorithm for retrieval of soil moisture was developed and evaluated using NASA/JPL aircraft synthetic aperture radar (SAR) data. It shows that the copolarization ratio is sensitive to soil moisture change but not to surface roughness at high incidence angles. This algorithm performed well at L-band and should be useful. This study suggests that incidence angles greater than 40 degrees are optimal for such monitoring.

Shi, Jiancheng↗

Airborne SAR determination of relative ages of Walker Valley moraines, eastern Sierra Nevada

A regional study of the distribution and elevations of Pleistocene moraines in the Andes requires a method of determining relative age from space. One of our primary objectives is to establish the relative chronology of major climatic events responsible for glaciation in the Andes and other regions that are difficult to access on the ground and where suitable material for absolute age determination is lacking. The sensitivity of radar to surface roughness makes it possible to develop a remotely-based relative dating technique for landforms for which surface age and roughness can be correlated. We are developing such a technique with Airborne Synthetic Aperture Radar (AIRSAR) imagery of the eastern Sierra Nevada where independent evidence is available for the ages and physical characteristics of moraines. The Sierra Nevada moraines are similar in form and environmental setting to Andean moraines that we have targeted for study during the pending Shuttle Imaging Radar-C (SIR-C) mission. SAR imagery is used to differentiate the ages of five moraine sequences of Walker Valley in the eastern Sierra Nevada. Other aspects of this investigation are briefly discussed.

Fox, A.↗

The Earth Observing System Synthetic Aperture Radar (EOS SAR) mission

The EOS SAR mission under consideration as one element of the mission to planet earth, which will provide a long duration radar observing system with multipolarization and multifrequency capability, is presented. The payload consists of three synthetic aperture radar systems; a C-band radar with dual polarization, an L-band radar with quadruple polarization, and an X-band radar with dual polarization. Each radar system will be of the phased-array type, will have variable resolutions and swath widths and will be capable of steering the beam electronically in elevation.

Wellman, John B.↗

The contribution of ion-cyclotron waves to electron heating and SAR-arc excitation near the storm-time plasmapause

The potential role of ion-cyclotron waves in the electron heating process has been studied, using the HOTRAY code. It is demonstrated that ion-cyclotron waves can play an important role in both the energy transfer to plasmaspheric electrons and the subsequent downward heat conduction to SAR arc altitudes. In particular, such waves can experience enhanced path integrated amplification along the steep plasmapause density gradient. The latter tends to keep the wave normal angle small on several successive bounces across the equator, thus allowing cyclotron-resonant amplification leading to a total gain of up to 20 e-foldings. When the wave propagation vector becomes highly oblique, absorption occurs during Landau resonance with thermal plasmaspheric electrons, increasing the electron temperature in the direction parallel to the ambient field and leading directly to heat conduction into ionosphere.

Thorne, Richard M.↗

Characterization and classification of sea ice in polarimetric SAR data

A more detailed characterization of the apparent thin ice types in the multifrequency, multipolarization synthetic aperture radar (SAR) dataset acquired during a campaign for validation of the DMSP SSM/I radiometer ice products is given. The emphasis is on providing a more detailed characterization of the signatures of apparent thin ice types observed in this data and the utility of these signatures for ice type classification purposes. The statistical characteristics of these signatures and their dependence on system calibration are summarized. Implications of these observations for sea ice scattering models are briefly discussed.

Kwok, R.↗

SAR-derived soil moisture measurements for bare fields

The results of algorithm development and testing for soil moisture retrieval at high incidence angles are reported. Based on first-order surface backscattering models, a physically based algorithm for retrieval of soil moisture has been developed and evaluated using NASA/JPL aircraft SAR (synthetic aperture radar) data. It shows that the co-polarization ratio is sensitive to soil moisture change but not to surface roughness at high incidence angles. This algorithm performed well at L-band and should be useful for repetitive, large-area soil moisture monitoring, without requiring surface roughness measurements. This study suggests that incidence angles greater than 40 deg are optimal for such monitoring.

Shi, Jiancheng↗

Performance of a polarimetric SAR calibration algorithm

Results of an investigation of the performance of a polarimetric SAR (synthetic aperture radar) calibration algorithm are presented. This calibration technique assumes that the co- and cross-polarized components of azimuthally symmetric natural targets are uncorrelated, and that these targets are reciprocal. Monte Carlo simulations were performed to evaluate its performance for a variety of system and surface types, in the presence of various noise levels. Some empirical limits are obtained on leakage between channels, correlation between HH and VV backscatter, ratio of cross-pol to co-pol backscatter, system noise level, size of training sample, and amount of correlation between cross-pol and co-pol, for which good results are obtained.

Klein, Jeffrey D.↗

Estimates of surface roughness derived from synthetic aperture radar (SAR) data

Radar remote sensing data provide a unique perspective of the earth's crust and the processes that have influenced its evolution. Physically based models are required, however, to relate the geophysical quantities being measured by the radar sensor to useful geologic information. In this study, synthetic aperture radar (SAR) data over the Cima volcanic field in the Mojave Desert of California are quantitatively connected with microtopography through inversion of a radar backscatter model. Changes in surface roughness inferred from the derived microtopography are modeled and found to be consistent with aeolian mantling as surfaces age. Estimated rates of aeolian deposition for the Cima area are compared to the Lunar Crater volcanic field in Nevada. Rates of deposition appear to be higher at Cima volcanic field, most likely because of its proximity to Soda Lake, the main source of the aeolian material.

Evans, Diane L.↗