Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Recrystallization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Thermal stability of additively manufactured austenitic 304L ODS alloy

Thermal stability and high-temperature mechanical properties of a 304L austenitic oxide dispersion strengthened (ODS) alloy manufactured via laser powder bed fusion (LPBF) are examined in this work. Additively manufactured 304L ODS alloy samples were aged at temperatures of 1000, 1100, and 1200 °C for 100 h in an argon atmosphere. Microstructure characterization of LPBF 304L ODS alloy before and after the thermal stability experiments revealed that despite the annihilation of dislocations, induced cellular substructure by the LPBF process was partially retained in the ODS alloy even after aging at 1200 °C. The size of Y-Si-O nanoparticles after aging at 1200 °C increased from 25 to 50 nm. EBSD analysis revealed that nanoparticles retained the microstructure of LPBF 304L ODS and hindered recrystallization and further grain growth. At 600 °C and 800 °C, the yield stress of the 290 and 145 MPa were measured, respectively, which are substantially higher than 113 MPa, and 68 MPa for 304L at the same temperatures. Furthermore, the creep properties of LPBF 304L ODS alloy were evaluated at a temperature of 700 °C under three applied stresses of 70, 85, and 100 MPa yielding a stress exponent (n) of ~7.7; the minimum creep rate at 100 MPa was found to be about two orders of magnitude lower than found in the literature for wrought 304L stainless steel.

36 MATERIALS SCIENCE↗

Structural damage response of lanthanum and yttrium aluminate crystals to nuclear collisions and electronic excitation: Threshold assessment of irradiation damage

A comparative analysis is performed on the structural damage response and associated mechanisms in lanthanum aluminate and yttrium aluminate crystals under various irradiation conditions by a combination of experimental and theoretical approaches. Under low-energy Au+ irradiation, the damage accumulation curve shows a higher damage rate for LaAlO 3 crystals than YAlO 3 crystals. The relatively low irradiation tolerance of LaAlO 3 to the action of nuclear collisions is ascribed to the large amorphization cross-section and effective cross-section for defect-stimulated amorphization. Under swift Ar 12+ , Ni 19+ and Kr 17+ irradiation with different ion energies and velocities, the formed highly-disordered/amorphous latent tracks with different morphologies in pristine and predamaged crystals are discussed, and the corresponding electronic energy loss and lattice temperature thresholds are quantitatively determined. Compared to YAlO 3 , LaAlO 3 exhibits lower sensitivity and higher damage tolerance to the electronic energy loss process, attributing to its relatively high recrystallization efficiency during the rapid quenching process. Furthermore, the introduction of lattice defects into LaAlO 3 and YAlO 3 crystals considerably enhances the sensitivity and intensity of thermal spike response to the electronic energy loss, and the induced effective modification of track morphologies demonstrates the synergistic effect between the electronic energy loss and pre-existing defects created by nuclear collisions. In this case, even under the action of electronic energy loss below the threshold, the lattice temperature in the nuclear-collision damaged crystalline system could still meet the criterion for track production. The irradiation energy deposited to atoms and induced lattice temperature evolution discussed in this work provide a deeper insight into the complex processes involved in irradiation-induced latent track behaviors.

36 MATERIALS SCIENCE↗

Mass transport in a highly immiscible alloy on extended shear deformation

Forced mixing to a single phase or supersaturated solid solution (SSS) and its prerequisite microstructure evolution in immiscible systems has been a focus of research for both fundamental science and a variety of applications. Controlling the formation of SSS by shear deformation assisted processing could enable a material design beyond conventional equilibrium microstructure in immiscible systems. Here, a highly immiscible (mixing enthalpy of ~ 20 kJ·mol -1 ) Cu-50 at. % Cr binary alloy was employed to investigate the microstructure evolution and localized tendencies of SSS during severe shear deformation. The present results demonstrate distinctive microstructure refinement process in each phase and how they lead to localized SSS as a function of shear strain. Preferential dynamic recrystallization occurs in the softer Cu phase due to strain localization, leading to substantial grain refinement. The refinement of Cr phase in the top-most layer, however, is enabled by the progressive evolution of grain lamination, splitting, and fragmentation as a function of shear strain. The eventual SSS is found to be strongly dependent on the local environments that affect the dislocation activity, including the level of microstructure refinement, the interfacial orientation relationship, hardness difference, and supposed stability of oxidation. Ab initio simulations comfirm that it is more favorable to oxidize Cr than Cu at incoherent Cu/Cr interfaces which then limits the mass transport on an incoherent boundary. Our results shed light on the underpinning mechanism for non-equilibrium mass transport in immiscible systems upon severe deformation that can be applicable to a variety of processing techniques aimed at producing immiscible alloys with superior mechanical properties.

36 MATERIALS SCIENCE↗

Neutron diffraction measurement of residual stresses, dislocation density and texture in Zr-bonded U-10Mo “mini” fuel foils and plates

Here, Al clad U-10Mo fuel plates are being considered for conversion of several research reactors from high-enriched to low-enriched U fuel. Neutron diffraction measurements of the textures, residual phase stresses, and dislocation densities in the individual phases of the mini-foils throughout several processing steps and following hot-isostatic pressing to the Al cladding, have been completed. Recovery and recrystallization of the bare U-10Mo fuel foil, as indicated by the dislocation density and texture, are observed depending on the state of the material prior to annealing and the duration and temperature of the annealing process. In general, the cladding procedure significantly reduces the dislocation density, but the final state of the clad plate, both texture and dislocation density, depends strongly on the final processing step of the fuel foil. In contrast, the residual stress state of the final plate is dominated by the thermal expansion mismatch of the constituent materials.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Microstructural investigation of an extruded austenitic oxide dispersion strengthened steel containing a carbon-containing process control agent

The adhesion of austenitic oxide dispersion strengthened (ODS) steel during mechanical alloying and a decreased powder production yield can be overcome by the addition of a process control agent: stearic acid. Here, the influence of stearic acid and the introduction of carbon in an extruded and annealed austenitic ODS steel was investigated. In particular the impact of carbon on the precipitate formation, the stability of particle and grain sizes during a heat treatment of 2 h at temperatures in a range between 500 and 1100 °C and the resulting grain size were investigated. No direct influence of carbon on the formation of precipitates was detected in the as-extruded condition. The orientation relationship of oxide nano-particles and the austenitic matrix was found to be size dependent. Also, a surprising growth of oxide precipitates was recorded, which starts at annealing temperatures as low as 700 °C. Precipitates in other steels do not show a growth in this temperature regime at all. For that reason, a possible link between the unexpected growth and the formation of carbides was investigated. M 7 C 3 and M 23 C 6 carbides were found in every sample condition and we were able to show that their amount follows a trend suggested by thermodynamic simulations. The grain size of the extruded austenitic ODS steel was examined and a grain refinement was found after a heat treatment of 2 h at 700 °C or higher was performed. That is caused by the inhabitation of further grain growth after nucleation as part of the recrystallization process has happened. The dragging force exerted by precipitates is strong enough to pin grain boundaries. Furthermore, no direct impact of carbon on the oxide precipitate growth was found, an indirect impact of carbon on the growth of ODS precipitates is supposed but requires long-term annealing studies to be verified.

36 MATERIALS SCIENCE↗

The effect of thermal-aging on the microstructure and mechanical properties of 9Cr ferritic/martensitic ODS alloy

In this paper, the thermal-stability of 9Cr F/M ODS alloy was evaluated by the aging treatment in the air at 700 degrees C for 10 h, 100 h, 1000 h, and 2005 h. The variations of mechanical properties with different aging periods were tested in terms of tensile testing and vickers microhardness. And the microstructural evolution of strengthening particles and grain morphologies in the 9Cr F/M ODS alloys were characterized using field emission scanning electron microscopy, transmission electron microscopy and high-energy X-ray diffraction. It was found that the as-rolled 9Cr F/M ODS alloy slightly recovered without recrystallization during the initial stage of less than 10 h aging time, resulting in the slight loss of tensile strength and microhardness and the increase of elongation. With the aging time prolonged to 2005 h, several of nano-sized Y-Ti-O particles coarsened and the composition changed to Y-Ti-Al-O, and the number density of large size nitride precipitations increased and the composition also changed from TiN to (Ti,AI)N. Meanwhile, some of grains tend to grow up in some preferential directions due to the zener pinning effect by the localized uneven distributed particles inside the grains, causing more particles, especially the particles with a size of larger than 40 nm, located at grain boundaries. These microstructural evolutions lead to the increasing of microhardness and a little bit decreasing of eleongation during 10 h-2005 h, and the increasing of tensile strength during 10 h-1000 h with the subsequent slight decreasing during 1000 h-2005 h. In conclusion, 9Cr F/M alloy shows a relatively good thermal-aging stability at 700 degrees C for 2005 h.

36 MATERIALS SCIENCE↗

Influence of solidification structures on radiation-induced swelling in an additively-manufactured austenitic stainless steel

Metal additive manufacturing offers potential advantages for producing structural materials, such as austenitic stainless steels, in nuclear power systems. However, the microstructure developed during metal additive processing is notably different from the one developed in conventional processing, and the influence of the microstructural differences on performance in radiation environments has not been fully quantified. Using heavy ion irradiation and transmission electron microscopy, the radiation-induced swelling response of a laser powder-bed fusion-manufactured austenitic stainless steel was investigated at high doses. The influence of solidification-induced dislocation and precipitate structures was studied by comparing the radiation-induced swelling response of a 316L stainless steel in three microstructural states: as-fabricated, solution annealed, and fully recrystallized. Void swelling was approximately twice as pronounced in the as-fabricated state compared to post-processed states. In the framework of the rate theory for radiation effects, the higher swelling in the as-fabricated state can be explained by the strong sink bias for interstitial point defects exerted by the intermediate density of pre-existing dislocations. Void swelling was inhibited in the vicinity of pre-existing precipitates, but the density of precipitates in the as-fabricated material was not enough to compensate for the increase in swelling caused by dislocations.

36 MATERIALS SCIENCE↗

Formation of multicomponent alloy particles in doped ceria under I 2+ ion irradiation and thermal annealing

Multicomponent alloys resembling the e-phase particles in nuclear fuel have the potential to immobilize 99 Tc in a stable waste form. Formation of such multicomponent alloys under extreme conditions is studied in a non-activated model system: CeO 2 doped with 2 wt% Mo, 1.5 wt% Ru, 0.75 wt% Pd, 0.5 wt% Re and 0.25 wt% Rh. The doped CeO 2 films were irradiated with I 2+ ions (610°C, 10 16 and 5×10 16 I 2+ /cm 2 ). For selected samples post-irradiation heat treatment was conducted (900°C, 1100°C). Analytical TEM revealed the formation of 5-20 nm precipitates containing Pd, Mo, and Re sometimes associated with cavities. Iodine was found to segregate to grain boundaries and cracks. After heat treatment at 1100°C, the CeO 2 matrix had recrystallized. Precipitates containing Pd, Mo, Re, and Ru were observed near the interface with the polycrystalline YSZ substrate. It follows that Pd is the most mobile element, followed by Mo and Re. Finally, while irradiation promotes precipitation, high-temperature effects are more significant.

36 MATERIALS SCIENCE↗

Electron microscopy characterization of the fuel-cladding interaction in medium burnup annular fast reactor MOX

In this work, we present electron microscopy data focused on the fuel-cladding interaction layer in annular fast reactor MOX with HT-9 cladding at medium burnup. In agreement with previous literature data, the volatile fission products Cs, Te and I have migrated radially into the extreme fuel periphery and partially interacted with the cladding. The accumulation of Cs has occurred in the outermost rim of the fuel pellet, where grain recrystallization has also been observed. Significant amounts of Pd have been found in the interaction zone, particularly in the sample taken from the upper half of the fissile column where the cladding temperatures are higher. At this axial location, Cr has been enriched at the cladding inner surface and diffused into the fuel. Furthermore, chromium remains mainly in metallic form, but locally formed oxides. The fission products Cs, Te and I are found, with variable composition, in form of nanocrystalline regions dispersed in the metallic Cr-rich layer. The morphology and chemical characteristics of the layer suggest a non-oxidative corrosion mechanism as principal cladding degradation phenomenon occurring in this sample, with local onset of Cr oxidation within the nanocrystalline precipitates.

36 MATERIALS SCIENCE↗

A novel protocol to recycle zirconium from zirconium alloy cladding from used nuclear fuel rods

A potential new zirconium recycling protocol has been demonstrated using unirradiated Zircaloy-based claddings and depleted uranium oxide for the chemical removal of zirconium alloy cladding in used nuclear fuel (UNF) rods from light water reactors. This protocol is based on the application of three new scientific findings. First, a new lower temperature chlorination reaction of zirconium with sulfur monochloride is described. Second, the high solubility of zirconium chloride in thionyl chloride is used to separate it from uranium oxide fuel and fission and activation contaminants. Finally, in the third step, the zirconium chloride is purified by simple recrystallization from thionyl chloride. Utilizing sulfur chloride solvents for a lower temperature liquid-based chemical digestion and purification of zirconium alloy claddings reduces technical complications experienced by current high temperature gas phase chlorination strategies, such as contamination of product streams. This novel protocol has been demonstrated on a 3–50 g scale of unirradiated zirconium alloy, with no significant change in the time required for complete chlorination (3–4 h). This zirconium chlorination protocol has also been performed in the presence of depleted uranium oxide pellets. The depleted fuel pellets do not affect zirconium chlorination, and the chlorination protocol does not chemically or physically alter the fuel pellets. Finally, a preliminary description of an industrial protocol to recycle nuclear grade zirconium from UNF rods is presented.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Investigating microstructural evolution in SolidStir™ extruded oxide dispersion strengthened 14YWT alloy fuel cladding tube

Structural components for extreme environments require advanced materials and manufacturing processes. One such advanced material is oxide dispersion strengthened (ODS) Fe–14 wt.%Cr–3W–0.4Ti–0.3Y 2 O 3 (14YWT), which is developed for components to be used in Gen IV and fusion nuclear reactors. However, the conventional manufacturing processes to produce components, such as fuel cladding tubes, either do not retain the desired microstructural attributes or are costly and less efficient. As a result, a more attractive option is a novel manufacturing process developed on the principle of friction stir welding or processing (FSW/P) and commercially referred to as SolidStir™ Extrusion (SSE). Here this study used the SSE technique to study the manufacturing and microstructural evolution of a fuel cladding tube made of ODS 14YWT alloy. The cladding extrusion by the SSE technique involved the use of ball-milled 14YWT powders with Y, Ti, and O in the solid solution and the use of a specially designed W-25Re-Hf tool for consolidation and extrusion of the powders. A scanning electron microscope (SEM), electron backscattered diffraction (EBSD), and transmission electron microscope (TEM) were utilized for microstructural characterization. A Keyence microscope captured macrostructural photographs of the extruded tube. EBSD examination of the extruded tube on both transverse and longitudinal cross-sections showed the presence of dynamically recrystallized grains and revealed that the average grain size of the transverse cross-section was smaller than that of the longitudinal cross-section. The texture was weak and consisted of some amount of shear texture. The presence of nano-oxide clusters or precipitates of Y, Ti, and O (pyrochlores) in the extruded tube was determined by TEM. Aging heat treatment caused the average precipitate size to decrease and the density to increase compared to the as-processed condition. The results indicated that SSE is a viable tool for manufacturing fuel cladding tubes with the desired microstructural attributes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Insight into the interfacial microstructure and chemistry of hot isostatically pressed AA6061-AA6061 bonds for U-10Mo fuel cladding application

Here, in the present study, hot isostatic pressing (HIP) bonding was carried out using AA6061-AA6061 plates for U-10Mo monolithic fuel cladding application. HIP was performed at 560°C with an applied isostatic pressure of 103 MPa for 90 min. Interfacial microstructure characterizations were performed using scanning electron microscopy (SEM) combined with electron backscatter diffraction (EBSD) to quantify precipitate fractions and study recrystallization, grain growth, and orientation relationships across the interface. EBSD results confirmed that no interfacial grain growth occurred during the HIP process. Transmission electron microscopy (TEM) was also employed to quantify composition and identify phases of various precipitates and an oxide layer that formed at the interface during HIP bonding. Microstructural analyses revealed the formation of a large fraction of Mg 2 Si precipitate and a ~50 nm thick Mg-oxide layer at the interface. Further TEM analysis confirmed that the oxide layer was not continuous, and Mg 2 Al 2 O 5 oxide particles with an average size of 18 nm were present in the oxide layer. Finite element modeling analysis was performed to study the stress distribution at the interface during HIP processing.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Porosity, swelling, and composition evolution in high-burnup monolithic U-Mo fuel

The microstructural progression of very high-burnup (>8 × 10 21 fissions/cm 3 ) monolithic uranium-molybdenum (U-10wt.%Mo) was analyzed, providing crucial insights into the behavior of post-recrystallized nuclear fuel, where scant data exists. Three focused ion beam cuboids sourced from a fuel plate with varying local burnups of 8.86 × 10 21 , 9.05 × 10 21 , and 9.36 × 10 21 fissions/cm 3 were characterized. The porosity and composition of the samples were evaluated to characterize the evolution of the microstructure as a function of fission density and different locations on the fuel plate, while simultaneously isolating plate-specific parameters such as Zr diffusion barrier thickness, hot-isostatic-pressing conditions, enrichment, and reactor conditions. The porosity was segmented, and the three-dimensional distribution of the porosity was extrapolated from the two-dimensional segmentation. The composition was assessed and quantified using energy-dispersive X-ray spectroscopy areal mapping. The porosity fraction increased as a function of the burnup from 27.77±0.51, 35.12±1.54, and 37.71±0.44 % for 8.86 × 10 21 , 9.05 × 10 21 , and 9.36 × 10 21 fissions/cm 3 , respectively. When compared to literature, the porosity volume fraction plateaus at burnups greater than 6 × 10 21 fissions/cm 3 , while the pore size grows linearly as a function of fission density. The number of large pores increased in number density as a function of burnup, while the smallest pores (<0.3 µm) increased up to 9.05 × 10 21 fissions/cm 3 , followed by a decrease at 9.36 × 10 21 fissions/cm 3 . The delamination and cracking in the fuel plate propagated through an interconnected porosity sublayer identified ∼5 µm from the diffusion barrier. The local swelling of the specimens was within or near the prediction bounds of the Robinson-Williams model for local swelling. The fission products, strontium, barium, cerium, and cesium, precipitated into the pores, while neodymium accumulated adjacent to the pores. Furthermore, these findings have direct implications for the development of fuel performance codes and the accurate documentation of the microstructure evolution in high burnup U-Mo, thus enhancing the safety and efficiency of nuclear fuel usage.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The reaction mechanism of SnSb and Sb thin film anodes for Na-ion batteries studied by X-ray diffraction, 119 Sn and 121 Sb Mössbauer spectroscopies

The electrochemical reaction of Sb and SnSb anode materials with Na results in the formation of amorphous materials. To understand the resulting phases and electrochemical capacities we studied the reaction products local order using 119 Sn and 121 Sb Mössbauer spectroscopies in conjunction with measurements performed on model powder compounds of Na-Sn and Na-Sb to further clarify the reactions steps. For pure Sb the discharge (sodiation) starts with the formation of an amorphous phase composed of atomic environments similar to those found in NaSb, and proceeds further by the formation of environments similar to that present in Na 3 Sb. The reversible reaction takes place during a large portion of the charge process. At full charge the anode material still contains a substantial fraction of Na, which explains the lack of recrystallization into crystalline Sb. The reaction of SnSb yields Na 3 Sb crystalline phase at full discharge at higher temperatures (65 and 95°C) while the room temperature reaction yields amorphous compounds. The electrochemically-driven, solid-state amorphization reaction occurring at room temperature is governed by the simultaneous formation of Na-coordinated Sn and Sb environments, as monitored by the decrease (increase) of the 119 Sn ( 121 Sb) Mössbauer isomer shifts. Overall, the monitoring of the hyperfine parameters enables to correlate the changes in Na content to the individual Sn and Sb local chemical environments.

25 ENERGY STORAGE↗

Slate – A new record for crystal preferred orientation

This report describes microstructures and preferred orientation of a Devonian slate from the Belgian Ardennes (La Fortelle quarry). The sample, composed largely of muscovite, chlorite, and quartz, displays extraordinary texture strength of muscovite, exceeding 100 multiples of random distribution (m.r.d.) for (001) pole figures and thus setting a new record for preferred orientation in rocks. Quantitative texture analysis was performed with the Rietveld method on synchrotron X-ray diffraction images. Interestingly, quartz also displays strong shape preferred orientation (SPO) as revealed by X-ray microtomography and SEM imaging but largely random crystallographic preferred orientation (CPO). In conclusion, microstructural evidence suggests that this fine-grained rock formed by recrystallization of shale under stress, with growth of phyllosilicates and dissolution and growth of quartz.

58 GEOSCIENCES↗

Enhanced visible-light absorption and dopant distribution of iodine-TiO{sub 2} nanoparticles synthesized by a new facile two-step hydrothermal method

In order to prepare visible-light responsive iodine-doped TiO{sub 2}, a new facile synthetic approach was proposed, which started with the cost-efficient and environmentally friendly precursor of undoped anatase TiO{sub 2} to form nanotube structures as templates that collapsed and recrystallized into I-TiO{sub 2} nanopowders in HIO{sub 3} solution, followed by annealing at different temperatures. The modification of TiO{sub 2} to incorporate iodine and form titanium dioxide with significantly enhanced absorption in the visible range of the spectrum was investigated. The extent of iodine dopant incorporation was determined by X-ray photoelectron spectroscopy (XPS) and energy dispersive X-ray analysis (EDX) and was found to be homogenously distributed on each nanostructure as determined by electron energy-loss spectroscopy (EELS) elemental mapping and EDX spectroscopy. The modified TiO{sub 2} exhibits a dramatically extended absorption edge beyond 800 nm as compared to the original and unmodified TiO{sub 2}. - Graphical abstract: As-synthesized I-TiO{sub 2} nanoparticles show significantly enhanced visible-light absorption, with the dopant iodine homogenously dispersed on each I-TiO{sub 2} nanostructure based on EELS elemental mapping. Highlights: > Iodine-TiO{sub 2} nanoparticles by a new facile two-step hydrothermal method. > Significantly enhanced light absorption in the visible range of the spectrum. > Homogenous dopant distribution within each nanostructure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗