Optical heterodyne receiver design by nonlinear recursive estimation techniques
Optical heterodyne receiver design, using nonlinear recursive techniques to estimate atmospheric fluctuation effects on IF signal characteristics
Pratt, W. K.↗
SEARCH · Engineering Papers
Results for “Receivers”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Operating noise-temperature calibrations of low-noise receiving systems
Deep Space Communications System low noise microwave receiver, discussing operating noise temperature calibration, error analysis and programming
Stelzried, C. T.↗
Development of low-cost receiving systems for television signals transmitted from synchronous satellites
Low cost TV ground receiving systems for signals transmitted from synchronous satellites, describing reception techniques, manufacturing and performance characteristics
Miller, E. F.↗
A 10.6 micron laser-receiver RF subsystem
One of the problems inherent in the use of optical communication systems is the exceedingly high Doppler shift which can be expected. With the recent development of stable, linear, octavebandwidth, voltage-tunable oscillators, this problem has been solved. A laboratory tracking receiver which is capable of tracking a 1-GHz frequency shift at rates up to 12 MHz/s with subsequent coherent data demodulation was designed and tested. This work demonstrates that the design and fabrication of an RF subsystem, utilizing coherent demodulation of data, for wideband communications systems is now both feasible and practical.
Santarpia, D. E.↗
Omega time transmissions and receiving requirements
A short history is given of the development of dual VLF time transmission techniques. The theory of time recovery from the relative phase of the dual frequency transmission is presented. The transmission and receiving requirements for cycle identification and cycle ambiguity resolution are described. Finally, an experiment to test the capability of time transmission of the OMEGA system is proposed
Chi, A. R.↗
Characterization of impulse noise and analysis of its effect upon correlation receivers
A noise model is formulated to describe the impulse noise in many digital systems. A simplified model, which assumes that each noise burst contains a randomly weighted version of the same basic waveform, is used to derive the performance equations for a correlation receiver. The expected number of bit errors per noise burst is expressed as a function of the average signal energy, signal-set correlation coefficient, bit time, noise-weighting-factor variance and probability density function, and a time range function which depends on the crosscorrelation of the signal-set basis functions and the noise waveform. A procedure is established for extending the results for the simplified noise model to the general model. Unlike the performance results for Gaussian noise, it is shown that for impulse noise the error performance is affected by the choice of signal-set basis functions and that Orthogonal signaling is not equivalent to On-Off signaling with the same average energy.
Houts, R. C.↗
Receiving antenna installation for ionospheric scattering links
Smearing of the scattered-energy flux density over a range of angles of arrival permits the use of a receiving-end antenna with a height lower than theoretical.
Ashkaliyev, Y. F.↗
The error probability of a wide-band FSK receiver in the presence of multipath fading.
Calculations are made for the probability of error of a wide-band FSK receiver of the type used in space telemetry when multipath reflections off the planetary surface cause signal fading. The error probability is found for both low and high fading bandwidths and for small or large reflected path delays.
Chadwick, H. D.↗
On the selection of an optimum design point for phase-coherent receivers employing band-pass limiters.
Discussion of the optimum power allocation problem associated with the design of a phase-coherent receiver employing a bandpass limiter. A single channel system is treated in detail, and an optimization technique is proposed that makes use of up-to-date phase-locked loop and bandpass limiter theories recently contributed by Lindsey (1969) and Springett and Simon (1971). It is shown how this technique can be extended to a two-channel system.
Simon, M. K.↗
Receiver processing for direct-detection optical communication systems.
A model that is sufficiently general to describe the predominant statistical characteristics of the output of many real optical detectors is formulated. This model is used to study the optimum receiver processing for direct-detection optical communication systems. In particular, the structures of detectors and estimators for filtered doubly stochastic Poisson processes (DSPP) observed in additive white Gaussian noise are considered. Representations for the posterior statistics of a vector Markov process that modulates the intensity of the DSPP are obtained.
Hoversten, E. V.↗
High-sensitivity receiver for CO2 laser communications
Wideband heterodyne receiver provides detection and demodulation of incident frequency modulated laser signal; search and acquisition circuitry to align two stations; tracking circuitry to maintain spatial alignment; and laser frequency monitor to frequency lock the transmit and local oscillator lasers.
Peyton, B.↗
Amplitude fading of simultaneous transionospheric L-band and VHF signals received at the geomagnetic equator
At Ancon, Peru, simultaneous observations of 1550-MHz and 136-MHz signals from the ATS 5 and Intelsat-1 spacecraft showed ionospheric fading as great as 27 db at 136 MHz and 6 db at 1550 MHZ. The observations were made on 48 days during the 1970 autumnal and 1971 vernal equinox periods. Comparison of the two frequencies, in respect to rates and depths of fades, is made. Statistical distributions of the received signal levels during ionospheric scintillation occurrences are presented which may be of use to communications system engineers with operational requirements in the equatorial regions. The distributions show that during expected periods of scintillation, the L band signal typically falls 1.1 db below the median for 1.0 percent of the time, and the VHF signal falls 11.5 db below the median for 1.0 percent of the time.
Sessions, W. B.↗
Digital receiver study and implementation
Computer software was developed which makes it possible to use any general purpose computer with A/D conversion capability as a PSK receiver for low data rate telemetry processing. Carrier tracking, bit synchronization, and matched filter detection are all performed digitally. To aid in the implementation of optimum computer processors, a study of general digital processing techniques was performed which emphasized various techniques for digitizing general analog systems. In particular, the phase-locked loop was extensively analyzed as a typical non-linear communication element. Bayesian estimation techniques for PSK demodulation were studied. A hardware implementation of the digital Costas loop was developed.
Fogle, D. A.↗
Transmitter and receiver antenna gain analysis for laser radar and communication systems
A comprehensive and fairly self-contained study of centrally obscured optical transmitting and receiving antennas is presented and is intended for use by the laser radar and communication systems designer. The material is presented in a format which allows the rapid and accurate evaluation of antenna gain. The Fresnel approximation to scalar wave theory is reviewed and the antenna analysis proceeds in terms of the power gain. Conventional range equations may then be used to calculate the power budget. The transmitter calculations, resulting in near and far field antenna gain patterns, assumes the antenna is illuminated by a laser operating in the fundamental cavity mode. A simple equation is derived for matching the incident source distribution to a general antenna configuration for maximum on-axis gain. An interpretation of the resultant gain curves allows a number of auxiliary design curves to be drawn which display the losses in antenna gain due to pointing errors and the cone angle of the outgoing beam as a function of antenna size and central obscuration. The use of telescope defocusing as an approach to spreading the beam for target acquisition is compared to some alternate methods.
Klein, B. J.↗
Dipole receiver characteristics in the presence of sea water
The receive properties for a dipole in the presence of sea water were obtained by solving integral equations for currents along the unloaded dipole and its image. For dipoles of 0.1 wavelength or higher above the sea surface, the performance resembled that of a dipole over a perfectly conducting plane; for dipoles within 0.1 wavelength above the sea surface, the relative gain dropped in about the same proportion as the relative reduction in the strength of the resultant electric field. An insulated wavelength/2 dipole with a conjugate load matched in free space had a relative power gain of 17 db below isotropic at the sea surface.
Kao, P. S.↗
Third-order phase-locked loop receiver
Third-order extension to present second-order systems extends their Doppler tracking capabilities. It widens receiver pull-in range, decreases pull-in time, lowers voltage-controlled oscillator (VCO) noise (determining when no signal is present), and lessens susceptibility to VCO drift.
Crow, R. B.↗
Dynamic polarization compensating system for optical communications receiver
Electro-optic cell is located in optical path of input light beam. Cell includes crystal for controlling phase between two polarization states. Cell axes are rotated 45 deg to receiver axes defined by vertical and horizontal polarization states. Voltage across cell compensates for bias by introducing different phase retardation along crystal axes.
Fitzmaurice, M. W.↗
Monitoring atmospheric pollutants with a heterodyne radiometer transmitter-receiver
The presence of selected atmospheric pollutants can be determined by transmitting an infrared beam of proper wavelength through the atmosphere, and detecting the reflections of the transmitted beam with a heterodyne radiometer transmitter-receiver using part of the laser beam as a local oscillator. The particular pollutant and its absorption line strength to be measured are selected by the laser beam wave length. When the round-trip path for the light is known or measured, concentration can be determined. Since pressure (altitude) will affect the shape of the molecular absorption line of a pollutant, tuning the laser through a range of frequencies, which includes a part of the absorption line of the pollutant of interest, yields pollutant altitude data from which the altitude and altitude profile is determined.
Menzies, R. T.↗