Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RISE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Non-self-sustained glow discharge with electrostatic confinement of electrons sustained by a fast neutral molecule beam

Experimental study of plasma produced at the nitrogen pressure 0.2-1 Pa in the chamber volume V Almost-Equal-To 0.12 m{sup 3} as a result of injection into the chamber of a broad nitrogen molecule beam with 1-4 keV energy and 0.1-1 A equivalent current is carried out, and the study results are presented. Dependences of the plasma density distribution on the beam equivalent current I{sub b}, energy E{sub b}, and gas pressure p indicate a crucial role of fast molecules in gas ionization, and the probe characteristics reveal two groups of plasma electrons with the temperatures T{sub e} {approx} 0.4 eV and T{sub e} {approx} 16 eV. Immersion in plasma of an electrode isolated from the chamber and application to the electrode of a positive voltage U result in non-self-sustained discharge. When U changes from {approx}0.5 to {approx}1.5 V, the discharge current I rapidly rises to a certain value I*, and after that the rate of rise dI/dU drops by an order of magnitude. At U {approx} 10 V, the current I rises to I{sub 0} Almost-Equal-To 1.5I*, and dI/dU once again drops by an order of magnitude. Current I{sub 0} specifies the number of electrons produced inside the chamber per second, and it grows up with E{sub b}, I{sub b}, and p. At U > 20 V, due to gas ionization by fast electrons emitted by the chamber and accelerated up to the energy {approx}eU in the sheath between the plasma and the chamber walls, the current I rises again. When U grows up to {approx}50 V, production of fast electrons with energies exceeding the ionization threshold begins inside the sheath, and the ionization intensity rises dramatically. At U > 150 V, contribution of fast electrons to gas ionization already exceeds the contribution of fast molecules, and the plasma density and its distribution homogeneity inside the chamber both grow up substantially. However, even in this case, the discharge is non-self-sustained, and only at U > 300 V it does not expire when the beam source is switched off.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Role of Off-Line-of-Sight Propagation in Geomagnetic EMP Formation

The author’s synchrotron radiation based 3D geomagnetic EMP code MACSYNC has been used to explore the impact on pulse rise time and air conductivity of EMP propagation paths to the observer that are located off the direct line-of-sight (LOS) between gamma source and observer. This geometry is always present because, for an isotropic source, most the gammas are emitted at an angle with respect to the LOS. Computations for a 1 kt near-surface burst observed from space yield two principal findings: 1. The rise time is generated by the combined actions of a) electron spreading along the LOS due to the Compton electron emission angular distribution folded with electron multiple scattering effects, and b) radiation arrival time spreading due to length differences for different off-LOS propagation paths. The pulse rise time does not depend on the rise time of the conductivity. The conductivity rise time determines the pulse amplitude. 2. One-dimensional legacy EMP codes are inherently incapable of producing the correct pulse shape because they cannot treat the dependence of the conductivity on two dimensions, i.e. the radius from the source and the angle of the propagation path with the LOS. This divergence from one-dimensionality begins at a small fraction of a nanosecond for a sea-level burst. This effect will also be present in high-altitude bursts, however, determination of its onset time and magnitude requires high-altitude computations which have not yet been done.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Shear Heating of Explosives using the Crush Gun; FY2018 Report

Explosives subject to rapid mechanical deformation can experience large internal velocity gradients; this is a dissipative process, causing internal temperature rise. If this internal frictional heating is sufficiently large and sufficiently localized it can cause ignition of the explosive. Modeling the heat deposition that arises from mechanical insult is an ongoing effort, and additional experimental data is required to develop the model [1]. Apneumatic gun apparatus was designed and built to deliver crushing impacts at velocities of 0-70 m/s. The apparatus is designed to halt the projectile approximately 1 mm before impacting the sapphire imaging surface, preventing a complete “pinch” condition from attaining. The primary diagnostics include high-speed visible videography and infrared imaging to determine spatial temperature rise of the sample during impact. Forty-seven tests were performed with the apparatus during FY18, on four different explosives: Comp-B, PBX 9501, LX-07, and LX-14.No measurable heating was observed with Comp-B at a nominal velocity of 58 m/s. A maximum temperature rise of 17 °C was recorded with PBX 9501 at an impact velocity of 59 m/s. A maximum temperature rise of 32 °C was observed with LX-07 at an impact velocity of 57 m/s. A maximum temperature rise of 15 °C was observed with LX-14 at an impact velocity of 59 m/s. In contrast to drop-weight tower sensitivity testing [2,3], no ignitions were observed in any of the impacts. The lack of appreciable heating is attributed to the arrest mechanism which prevents the projectile from completing the final ~2 mm of crush. Differences between the explosive compositions are attributed primarily to binder effects.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Beirut Explosion Yield and Mushroom Cloud Height - Effects of the Source Environment

I use crater dimensions to estimate the yield of the August 4th, 2020 Beirut explosion to be equivalent to approximately 1.4 kilotons of TNT with a lower bound of about 0.7 kilotons. Based on the amount of ammonium nitrate reported to have been stored at the Beirut harbor, I assume an upper bound for the yield of 2.75 kilotons. However, it is highly likely that the yield was less than 2.75 kilotons, since reported values for TNT equivalence of ammonium nitrate are typically much less than one hundred percent. The crater-size based yield estimates are based on crater radius estimates from satellite imagery and empirical curves and data for scaled crater radius from past chemical and nuclear explosions. I present evidence that suggests that the relatively large crater radius is due to a high degree of coupling of shock wave energy to the surrounding medium and a reduction of the effective stress because of a high level of saturation of the geologic media beneath the explosion. I provide yield estimates based on seismic body-wave magnitude and crater depth as corroborating evidence. I compare preliminary estimates for the maximum debris cloud height, based on cell phone videos/images, with predicted maximum heights for this yield range from empirical formulas and numerical cloud-rise models. Based on a preliminary analysis of cell phone footage, the observed maximum cloud height appears to be approximately 1600 m. This is much lower than that predicted using standard empirical formulas and buoyant cloud rise models. I present results from a modified buoyant cloud rise model that more accurately predicts the maximum cloud height by allowing for the inclusion of a fixed amount of air and/or water into the fireball at the start of cloud rise. The amount of mass that needs to be added at the start, to reproduce the observed maximum cloud height, is relatively small compared to the total mass entrained during cloud rise. A much greater amount of dry air or debris is required, relative to water, for an equivalent reduction in maximum cloud height. The ammonium nitrate is one possible source for water in the fireball since it was being stored in a very humid environment and ammonium nitrate is known to be hygroscopic. The ground beneath the explosion, especially if it were saturated, and the nearby harbor could also have been sources for water or debris in the fireball.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Response Of Salt Intrusion In A Tidal Estuary To Regional Climatic Forcing (FVCOM Output for the baseline scenario)

Salinity distribution in a large tidal estuary is subject to estuarine adjustment under the influences of multiple physical drivers such as freshwater pulses and sea level rise, and is crucial to upstream water quality, aquaculture, and ecosystem functions of the estuary. To better understand the estuarine salinity response to climate change, the unstructured-grid Finite Volume Community Ocean Model was implemented to simulate the salt intrusion in the Delaware Bay Estuary. The model was first validated by multiple observational data sets and subsequently applied in an idealized setting to examine the response of salt front to freshwater pulses in high flow conditions, followed by a long-term drought condition supported by a multi-decadal streamflow drought analysis in the estuary. The model results showed that after the freshwater pulses the salt front location moved further upstream with sea level rise. Under the simulated long-term drought condition, the adjustment timescale of salt intrusion varies nonlinearly with sea level rise. With a significant increase in sea level rise, the adjustment timescale starts to decrease. This shift suggests a transition into a different regime where the estuary becomes more stratified, as indicated by an increasing bulk Simpson number with rising sea levels. These findings have been summarized into a journal manuscript. The data included in this information release request are FVCOM model output associated with the numerical simulations described in the journal manuscript.

Liu, Jinliang↗

Imaging Observations of Magnetic Reconnection in a Solar Eruptive Flare

Solar flares are among the most energetic events in the solar atmosphere. It is widely accepted that flares are powered by magnetic reconnection in the corona. An eruptive flare is usually accompanied by a coronal mass ejection, both of which are probably driven by the eruption of a magnetic flux rope (MFR). Here we report an eruptive flare on 2016 March 23 observed by the Atmospheric Imaging Assembly on board the Solar Dynamics Observatory . The extreme-ultraviolet imaging observations exhibit the clear rise and eruption of an MFR. In particular, the observations reveal solid evidence of magnetic reconnection from both the corona and chromosphere during the flare. Moreover, weak reconnection is observed before the start of the flare. We find that the preflare weak reconnection is of tether-cutting type and helps the MFR to rise slowly. Induced by a further rise of the MFR, strong reconnection occurs in the rise phases of the flare, which is temporally related to the MFR eruption. We also find that the magnetic reconnection is more of 3D-type in the early phase, as manifested in a strong-to-weak shear transition in flare loops, and becomes more 2D-like in the later phase, as shown by the apparent rising motion of an arcade of flare loops.

79 ASTRONOMY AND ASTROPHYSICS↗

Exploring the Effects of Varying Pre-Chamber Geometry in a Heavy-Duty Natural Gas Optical Engine under Dilution Conditions

Pre-chamber combustion is an advanced ignition strategy that has been shown to enhance spark ignition (SI) combustion stability in natural gas (NG) engines by providing distributed ignition sites from turbulent jets and enhancing main-chamber turbulence. Pre-chamber combustion has been proven especially advantageous compared to SI in ultra-lean and dilute operating conditions. This work involves experimental investigation of the effects of varying passive pre-chamber nozzle configuration on pre-chamber and main chamber combustion under simulated exhaust gas recirculation (EGR) dilution (0 and 20%) conditions in a heavy-duty, single-cylinder, optically accessible NG engine at stoichiometric fuel-air ratio. Pre-chamber nozzle configurations include four pre-chambers with constant nozzle area to pre-chamber volume ratio (A/V) with different nozzle sizes and orientations and one configuration with larger nozzles. The optical engine is operated in a skip-fire sequence consisting of 18 motored cycles followed by two consecutive fired cycles to elucidate the effect of combustion residuals (internal EGR) on combustion evolution. Pressure-based diagnostics are used to monitor pre-chamber and subsequent main chamber combustion, and optical diagnostics include high-speed OH* chemiluminescence to visualize the development of pre-chamber jets and the resulting ignition of the main chamber charge. Heat release analysis of the in-cylinder pressure data indicates that a faster pre-chamber pressure rise does not always translate into faster main-chamber combustion. The pre-chamber with the smallest nozzle diameter produced the highest pre-chamber pressure rise and fastest combustion under non-diluted conditions. However, dilution delays the main chamber ignition for smaller nozzles despite a comparable rise in pre-chamber pressure compared to configurations with larger nozzles. This effect is more pronounced for cycles with in-cylinder combustion residuals in addition to external dilution. Additionally, it was observed that pre-chambers with swirling nozzles have a faster pressure rise in the pre-chamber and main chamber under dilute conditions. Optical diagnostics suggest that the main reason for the delay between the pre-chamber pressure rise and main-chamber combustion lies in jet quenching and delayed re-ignition, which can even lead to misfire if jets emitted from small nozzles combined with dilution fail to re-ignite.

Dhotre, Akash [University Of Minnesota-Twin Cities↗

Model experiment to study the effect of turbulence on risetime and waveform of N waves

Typical measured sonic boom rise times are two to five times longer than rise times calculated using molecular relaxation theory. The difference may be due to atmospheric turbulence. A model experiment was set up to study the influence of turbulence on waveform and rise time of spark-produced N waves. The N waves propagate through turbulence generated by a plane jet. The model turbulence is scaled down from atmospheric turbulence by approximately the same factor as the model N wave is scaled down from the sonic boom. Our experiments show that passage through the turbulence produces a wide variety of changes in the N waveform. Spiked and rounded N waves are observed, and average rise time is increased by a factor of about 2. A tentative observation based on data obtained so far is that rise time is always increased, never decreased, by turbulence.

Lipkens, Bart↗

The Effect of Beam Loading on Water Impact Loads and Motions

An investigation of the effect of beam loading on impact loads and motions has been conducted in the Langley impact basin. Water impact tests of flat-bottom 5-inch-and 8-inch-beam models having beam-loading coefficients C(sub Delta) from 62.5 to 544 and a 30 deg dead-rise 5-inch-beam model A having beam-loading coefficients from 208 to 530 are described and the results analyzed to show trends of these heavy-beam-loading data with initial flight-path angle, trim angle, dead-rise angle, and time through- out the impact. Data from flat-bottom model tests, C(sub Delta) = 4.4 to 36.5, and from 30 deg dead-rise model tests, C(sub Delta) = 0.58 and 18.8, are included, along with the heavy-beam-loading data; and variations of these data with beam-loading coefficients are shown. Each of the load and motion coefficients is found to be directly proportional to a power factor of C(sub Delta). For instance, the maximum impact lift coefficient is found C(sub L,max) to be directly proportional to C(sub Delta, exp 0,33) for the flat-bottom model and C(sub Delta, exp 0,45) for the 30 deg dead-rise model. These variations of C(sub L, max) with C(sub Delta) are found to be in agreement with theoretical variations. Finally, an empirical equation for the prediction of C(sub L,max) is presented and is shown to give good agreement with experimental C(sub L, max) for about 500 fixed-trim smooth-water impacts. The range of variables included dead-rise angles from 0 deg to deg, beam-loading coefficients from o.48 to 544, trim angles from 3 deg to deg, and initial flight-path angles from about 2 deg to about deg.

Mixson, John S.↗

The Effect of Beam Loading on Water Impact Loads and Motions

An investigation of the effect of beam loading on impact loads and motions has been conducted in the Langley impact basin. Water impact tests of flat-bottom 5-inch- and 8-inch-beam models having beam-loading coefficients C(sub Delta) from 62.5 to 544 and a 30 0 dead-rise 5-inch-beam model A having beam-loading coefficients from 208 to 530 are described and the results analyzed to show trends of these heavy-beam-loading data with initial flight-path angle, trim angle, dead-rise angle, and time throughout the impact. Data from flat-bottom model tests, C(sub Delta) = 4.4 to 36.5, and from 300 dead-rise model tests, C(sub Delta)A = 0.58 and 18.8, are included, along with the heavy-beam-loading data; and variations of these data with beam-loading coefficients are shown. Each of the load and motion coefficients is found to be directly proportional to a power factor ofC(sub Delta). For instance, the maximum impact lift coefficient C(sub L,max)is found to be directly proportional to C(sub Delta)(sup 0.33) for the flat-bottom model and C(sub Delta)(sup 0.45) for the 30 deg dead-rise model. These variations of C(sub L,max) C(sub Delta) are found to be in agreement with theoretical variations. Finally, an empirical equation for the prediction of C(sub L,max) is presented and is shown to give good agreement with experimental C(sub L,max) for about 500 fixed-trim smooth-water impacts. The range of variables included dead-rise angles from 0 deg to 30 deg, beam-loading coefficients from 0.48 to 544, trim angles from 3 deg to 45 deg and initial flight-path angles from about 2 deg to about 27 deg.

Mixson, John S.↗

Estimating the Size and Timing of Maximum Amplitude for Cycle 23 from Its Early Cycle Behavior

On the basis of the lowest observed smoothed monthly mean sunspot number, cycle 23 appears to have conventionally begun in May 1996, in conjunction with the first appearance of a new cycle, high-latitude spot-group. Such behavior, however, is considered rather unusual, since, previously (based upon the data- available cycles 12-22), the first appearance of a new cycle, high-latitude spot- group has always preceded conventional onset by at least 3 months. Furthermore, accepting May 1996 as the official start for cycle 23 poses a dilemma regarding its projected size and timing of maximum amplitude. Specifically, from the max-min and amplitude-period relationships we infer that cycle 23 should be above average in size and a fast riser, with maximum amplitude occurring before May 2000 (being in agreement with projections for cycle 23 based on precursor information), yet from its initial languid rate of rise (during the first 6 months of the cycle) we infer that it should be below average in size and a slow riser, with maximum amplitude occurring after May 2000. The dilemma vanishes, however, when we use a slightly later-occurring onset. For example, using August 1996, a date associated with a local secondary minimum prior to the rapid rise that began shortly thereafter (in early 1997), we infer that cycle 23's rate of rise is above that for the mean of cycles 1-22, the mean of cycles 10-22 (the modern era cycles), the mean of the modern era'fast risers,' and the largest of the modern era 'slow risers' (i.e., cycle 20), thereby, suggesting that cycle 23 will be both fast-rising and above average in size, peaking before August 2000. Additionally, presuming cycle 23 to be a well- behaved fast-rising cycle (regardless of whichever onset date is used), we also infer that its maximum amplitude likely will measure about 144.0 q+/- 28.8 (from the general behavior found for the bulk of modern era fast risers; i.e., 5 of 7 have had their maximum amplitude to lie within 20% of the mean curve for modern era fast risers). It is apparent, then, that sunspot number growth during 1998 will prove crucial for correctly establishing the size and shape of cycle 23.

Wilson, Robert M.↗

Recent Results Pertaining to the Application of the "Area Rule"

This paper is concerned primarily with the application of the "area rule" to the interpretation and improvement of the drag-rise characteristics of wing-body combinations at transonic and moderate supersonic speeds. Consideration of the general physical nature of the flow at transonic speeds, together with comparisons of the flow fields and drag-rise characteristics for wing-body combinations and bodies of revolution has led to the conclusion that near the speed of sound the drag rise for a thin low-aspect-ratio wing-body combination is primarily dependent on the axial distribution of cross-sectional area normal to the airstream (ref. 1). (The drag rise, sometimes referred to as pressure drag, is the difference between the drag level near the speed of sound and the drag level at subsonic speeds where the drag is due primarily to skin friction.) In order to illustrate the concept, figure 1 shows a wing-body combination and a body of revolution. A typical cross section normal to the airstream for the wing-body combination is shown at AA. The cross-sectional area of the wing is wrapped around the body of revolution so that the body has the same cross-sectional area at BB. All the other cross-sectional areas of the body of revolution are the same as those for the wing-body combination at the same axial stations. On the basis of the conclusion just stated, the drag rise for this body of revolution should be similar to that for the wing-body combination.

Whitcomb, Richard T.↗

Effects of Fuselage Modifications on the Drag Characteristics of a 1/20-Scale Model of the Convair F-102 Airplane at Transonic Speeds

An investigation has been conducted in the Langley 8-foot transonic tunnel to determine the effects of several fuselage modifications on the transonic drag-rise characteristics of a 1/20-scale model of the Convair F-102 airplane. Tests covered an angle-of-attack range from 0deg to about 10deg and a Mach number range from 0.60 to 1.14. Results indicated that the transonic drag rise .for the basic F-102 airplane could be substantially reduced by extending the fuselage after-body approximately 8 percent of the fuselage length. Tests of other bodies indicated that a shorter (4-percent) afterbody extension may have a similar effect on the drag rise. Further improvement of the axial cross-sectional-area distribution of the 8-percent extended configuration through the addition of fuselage volume resulted in additional reductions in the drag rise at a Mach number of 1.0 and caused no or only slight drag penalties at the higher Mach numbers. The results of the present tests generally substantiate the area-rule concept with respect to the prediction of the transonic drag rise through the use of an equivalent-area body of revolution for a practical delta-wing airplane configuration.

Kelly, Thomas C.↗

Early Hinode Observations of a Solar Filament Eruption

We use Hinode X-Ray Telescope (XRT) and Solar Optical Telescope (SOT) filtergraph (FG) Stokes-V magnetogram observations to study the early onset of a solar eruption that includes an erupting filament that we observe in TRACE EUV images; this is one of the first filament eruptions seen with Hinode. The filament undergoes a slow rise for at least 30 min prior to its fast eruption and strong soft X-ray flaring, and the new Hinode data elucidate the physical processes occurring during the slow-rise period: During the slow-rise phase, a soft X-ray (SXR) sigmoid forms from apparent reconnection low in the sheared core field traced by the filament, and there is a low-level intensity peak in both EUV and SXRs during the slow rise. The SOT data show that magnetic flux cancellation occurs along the neutral line of the filament in the hours before eruption, and this likely caused the low-lying reconnection that produced the microflaring and the slow rise leading up to the eruption.

Sterling, Alphonse C.↗

Large Eddy Simulation of Transonic Flow Field in NASA Rotor 37

The current paper reports on numerical investigations on the flow characteristics in a transonic axial compressor, NASA Rotor 37. The flow field was used previously as a CFD blind test case conducted by American Society of Mechanical Engineers in 1994. Since the CFD blind-test exercise, many numerical studies on the flow field in the NASA Rotor 37 have been reported. Although steady improvements have been reported in both numerical procedure and turbulence closure, it is believed that all the important aspects of the flow field have not been fully explained with numerical studies based on the Reynolds Averaged Navier-Stokes (RANS) solution. Experimental data show large dip in total pressure distribution near the hub at downstream of the rotor at 100% rotor speed. Most original numerical solutions from the blind test exercise did not predict this total pressure deficit correctly. This total pressure deficit at the rotor exit was attributed to a hub corner flow separation by the author. Several subsequent numerical studies with different turbulence closure model also calculated this dip in total pressure rise. Also, several studies attributed this total pressure deficit to a small leakage flow coming from the hub in the test article. As the experimental study cannot be repeated, either explanation cannot be validated. The primary purpose of the current investigation is to investigate the transonic flow field with both RANS and a Large Eddy Simulation (LES). The RANS approach gives similar results presented at the original blind test exercise. Although the RANS calculates higher overall total pressure rise, the total pressure deficit near the hub is calculated correctly. The numerical solution shows that the total pressure deficit is due to a hub corner flow separation. The calculated pressure rise from the LES agrees better with the measured total pressure rise especially near the casing area where the passage shock interacts with the tip clearance vortex and flow becomes unsteady due to this interaction. The LES simulation also calculates the total pressure rise deficit near the hub and it agrees well with the measured data.

Hah, Chunill↗

Effect of an Additional, Parallel Capacitor on Pulsed Inductive Plasma Accelerator Performance

A model of pulsed inductive plasma thrusters consisting of a set of coupled circuit equations and a one-dimensional momentum equation has been used to study the effects of adding a second, parallel capacitor into the system. The equations were nondimensionalized, permitting the recovery of several already-known scaling parameters and leading to the identification of a parameter that is unique to the particular topology studied. The current rise rate through the inductive acceleration coil was used as a proxy measurement of the effectiveness of inductive propellant ionization since higher rise rates produce stronger, potentially better ionizing electric fields at the coil face. Contour plots representing thruster performance (exhaust velocity and efficiency) and current rise rate in the coil were generated numerically as a function of the scaling parameters. The analysis reveals that when the value of the second capacitor is much less than the first capacitor, the performance of the two-capacitor system approaches that of the single-capacitor system. In addition, as the second capacitor is decreased in value the current rise rate can grow to be twice as great as the rise rate attained in the single capacitor case.

Polzin, Kurt A.↗

Electron Backstreaming Determination for Ion Thrusters

Electron backstreaming in ion thrusters is caused by the random flux of beam electrons past a potential barrier established by the accel grid. A technique that integrates this flux over the radial extent of the barrier reveals important aspects of electron backstreaming phenomena for individual beamlets, across the thruster beam, and throughout thruster life. For individual beamlets it was found that over 99% of the electron backstreaming occurs in a small annulus at the center of the beamlet that is less than 20% the area of the beamlet at the potential barrier established by the accel grid. For the thruster beam it was found that over 99% of the backstreaming current occurs inside of r = 6 cm for the over 28 cm diameter NSTAR grid. Initial validation against ELT data shows that the technique provides the correct behavior and magnitude of electron backstreaming limit, V(sub ebs). From the sensitivity analyses it is apparent that accel grid chamfering may be the dominant mechanism contributing to the sharp rise in the absolute value of V(sub ebs) observed in the ELT but does not explain the rise in ion transparency. Grid gap change also contributes to the absolute value of V(sub ebs) rise and large rises in ion transparency with thruster life for the center gridlet. Screen grid erosion contributes generally to rises in the absolute value of V(sub ebs) and ion transparency, but for the assumptions used herein, it appears to not have as much of an effect chamfering or grid gap change. Overall, it is apparent that accel grid chamfering, grid gap change, and screen grid erosion are important to the increase in electron backstreaming observed during the ELT.

Wirz, Richard E.↗

Imdr Regio: The Geology of A Possible Active Hot Spot on Venus and A Target for Future Exploration By the ESA Envision Mission.

With Venus being the focus of future new missions like ESA’s EnVision, we need to look for target sites for future investigations on Venus. The different instruments will help to study the planet in a unprecedented detail. In particular, the VenSAR instrument will map the 20% of the surface of Venus at a resolution of 5 to 10 meters/pixel, so it gets crucial to select what areas of Venus deserve to be targeted for such a high-resolution mapping. We propose here Imdr Regio as a good candidate location for combined high resolution SAR mapping and for study with the rest of the mission instruments (e.g., Subsurface Radar Sounder). Imdr Regio is a large topographic rise that extends approximately from 35ºS-50ºS and 195ºE-225ºE between the volcanic plains of Helen, Nsomeka and Wawalag Planitiae. Imdr Regio was classified as a volcano-dominated topographic rise with a minimum-maximum diameter of 1200-1400 km and a swell height of 1.6 km. The southeast of Imdr Regio is dominated by Idunn Mons (46.5ºS/214.5ºE). Studies using the 1 µm (derived) surface emissivity from the Venus Express mission of the volcanic flows surrounding Idunn Mons suggest that high emissivity values in the volcano flanks are related to relatively unweathered basaltic rock and therefore indicative of a recent or even ongoing volcanic activity. We have carried out geologic mapping in the area to constrain volcanic and tectonic structures, and the geologic history of the large topographic rise. This geologic mapping reveals that different styles of volcanism are present across Imdr Regio and that this volcanic activity takes place in all the hot spot in close relation with the formation of a rift throughout all time represented by in the area. The first stages on the evolution of this large volcano are characterized by the formation of a radial fracture system and contemporaneous large sheet flows. These large sheet flows are locally difficult to distinguish from regional plains and are also deformed by regional N-trending wrinkle ridges. After this initial phase, multiple overlapping digitate flow units form the flanks and summit of the volcano and are contemporaneous with NW-SE trending fractures and graben of Olapa Chasma, a rift system that cross the topographic rise. To the northwest another large volcano also presents a system of radial fractures but lacks clear large sheet flows. Numerous pit chains are associated to fractures and graben, suggesting that transport of magma under the surface is important. The geologic history based on the mapping suggests that activity in Imdr Regio started with the emplacement of a plume/diapir in the southeast, which resulted in the formation of a radial dyke system and the emplacement of large sheet flows in Idunn Mons. The presence of other large volcanoes to the northwest suggests the presence of another magmatic source (plume or diapir). After this initial stage, volcanism continues in Idunn Mons and activity in the topographic rise is strongly related to the formation of Olapa Chasma. Rift-related volcanic flows postdate these other volcanoes and are contemporaneous with the late activity in Idunn Mons. Monogenetic volcanism is present in the rift and in all the units that are in the area.

I. López↗