Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REFLECTOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Lightweight reflector assembly

An inexpensive, lightweight reflective assembly member having good optical quality and particularly adaptable to accommodating temperature variations without providing destructive thermal stresses and reflective slope errors is described. The reflective assembly consists of a thin sheet of glass with appropriate reflective coating and a cellular glass block substrate bonded together. The method of fabrication includes abrading the cellular substrate with an abrasive master die to form an appropriate concave surface. An adhesive is applied to the abraded surface and a lamina reflective surface is placed under a uniform pressure to conform the reflective surface onto the desired abraded surface of the substrate.

Argoud, M. J.↗

Use of clear lake as standard reflectors for atmospheric measurement

A method is proposed for using clear lakes as dark backgrounds against which the atmospheric path radiance can be determined from satellite observations. If the path radiance can be determined to sufficient accuracy, the atmospheric extinction can be inferred with suitable radiative transfer models. An extensive program of observation was made to determine the magnitude and variability of the various contributors to the total radiance observed by a satellite. It is shown that the volume and surface reflectance contributions (in the absence of sunglint) are small, constant, and can be modeled accurately enough to make these an insignificant source of error. The sunglint radiance observed in this investigation may be a significant source of error. It is shown that atmospheric extinction can be inferred from the path radiance observation after systematic differences between the model and observations are removed.

Ahern, F. J.↗

New approaches to analysis and synthesis of reflector antennas

Recently developed techniques are reviewed for analyzing and synthesizing single and dual antennas for high efficiency and wide angle scan. The problem of contour beam synthesis using superposition of pencil beams is also discussed.

Galindo-Israel, V.↗

In orbit manufacture of solar reflector satellites

The implementation of an idea reported by Oberth (1929) is discussed. This idea is concerned with the reflection of sunlight to the ground by means of orbiting metal mirrors. The approach used for implementing Oberth's idea makes use of aluminized Mylar as a reflecting material which is supported with the aid of a structure which includes six booms and a peripheral mirror cable. Four low resistance one turn coils are formed by the structure. Magnetic forces for attitude maneuvers are obtained by energizing the coils. A bipropellant propulsion system is to be used to raise the initial 330 km circular parking orbit to a 330 by 1000 km elliptic orbit. Two thrusters are employed. They are oriented parallel to each other and the mirror surface. The mirror satellite can be completely folded so as to maximize the launch capability of the Shuttle.

Muller, R. M.↗

Structural development of the Nimbus-G/Seasat-A SMMR graphite epoxy antenna reflector

Specific details concerning the structural design, analysis, fabrication and testing of the Nimbus-G/Seasat-A Scanning Multichannel Microwave Radiometer (SMMR) are presented. Design requirements are illustrated and trade-off considerations discussed in terms of flight project requirements. It is shown that the application of graphite/epoxy material results in a lightweight, stiff, thermally stable antenna structure fully qualified for mission application.

Knoell, A.↗

Calculating the Performance of a Solar Reflector

New method calculates efficiency and useful heat of parabolic solar concentrator. Method uses three-part nomogram, consisting of a main chart and two other components. User enters the nomogram using known factors, then proceeds to plot lines to intercepts on nomogram to find results.

Selcuk, M. K.↗

Development of the maypole (hoop/column) deployable reflector concept for large space systems application

A review of the NASA supplied mission scenarios for the communications, radiometry and radio astronomy missions. Led to specific hoop/column antenna configurations for each mission. The mission configurations were then evaluated to identify specific technology items requiring further development. The compilation of these technology drivers resulted in a specification of an artificial or point design, the design element around which all design and performance estimates for the rest of the program were made. Mechanisms for deployment and stowing are examined including the cable driven mast and the latch pulley roller. Methods for determining the thermal expansion of candidate materials, the development of the cables, cords, and hinged joints, and surface adjustment are considered.

Montgomery, D. C.↗

Surface accuracy measurement sensor for deployable reflector antennas

The breadboard surface accuracy measurement sensor is an optical angle sensor which provides continuous line of sight position measurements of infrared source targets placed strategically about the antenna surface. Measurements of target coordinates define the surface figure relative to a reference frame on the antenna. Sensor operation, tests and test results to date are described.

Spiers, R. B., Jr.↗

Conceptual design studies for large free-flying solar-reflector spacecraft

The 1 km diameter reflecting film surface is supported by a lightweight structure which may be automatically deployed after launch in the Space Shuttle. A twin rotor, control moment gyroscope, with deployable rotors, is included as a primary control actuator. The vehicle has a total specific mass of less than 12 g/sq m including allowances for all required subsystems. The structural elements were sized to accommodate the loads of a typical SOLARES type mission where a swam of these free flying satellites is employed to concentrate sunlight on a number of energy conversion stations on the ground.

Hedgepeth, J. M.↗

Optimum shape of a Kirkpatrick-Baez X-ray reflector supported at discrete points for on-axis performance

A method is proposed for optimizing the on-axis resolution of a Kirkpatrick-Baez reflecting element. The proposed procedure provides a way to determine the location of each of the 11,200 support points (175 different points plus repeats) by using a computer-assisted structural-optical software package. This automated procedure will make it possible to determine the optical characteristics of an entire telescope module consisting of seventy mirrors.

Cohen, L. M.↗

Radio frequency verification tasks related to a multiple aperture reflector system

The establishment of analytical methods for predicting the electromagnetic performance of multiple offset fed apertures for multiple beam large space antenna systems is highlighted. The development of experimental modeling techniques for verifying the analytical methods used in predicting the effects of surface roughness (pillows), scattering, and aperture coupling on RF performance is discussed.

Campbell, T. G.↗

Realizable feed-element patterns for multibeam reflector antenna analysis

The radiation pattern of a feed element is approximately described by a simple function (cos theta) to the q power. For a given element spacing of the feed array, simple formulas for estimating the practical value of q when the element is an open-ended rectangular waveguide, an open-ended circular waveguide, a pyramidal horn, or a cigar antenna are given.

Rahmat-Samii, Y.↗

Accuracy potentials for large space antenna reflectors with passive structure

Analytical results indicate that a careful selection of materials and truss design, combined with accurate manufacturing techniques, can result in very accurate surfaces for large space antennas. The purpose of this paper is to examine these relationships for various types of structural configurations. Comparisons are made of the accuracy achievable by truss- and dome-type structures for a wide range of diameter and focal length of the antenna and wavelength of the radiated signal.

Hedgepeth, J. M.↗

Structures for large precision reflectors

The design and fabrication of a highly accurate large aperture infrared reflecting telescope is discussed. The structural concept is an off axis Cassegrainian design with a focal length equal to the aperture diameter. Thermal shielding, peak heat fluxes, cooling rates, active control tasks, and deployment sequence are discussed.

Hedgepeth, J. M.↗

Development of improved analytical models for mesh reflector surfaces

Several methods for computing the reflection coefficients from mesh surfaces are discussed. Some methods mentioned have severe limitations, and the spectral approach appears to be the most attractive alternative. In spite of some inherent problems, the solutions obtained with this method will offer not only the reflection coefficients but also the currents carried on the mesh. This would allow separation of the power lost to resistive terms from that due to transmission loss. Overall, good results and rapid convergence should be obtained from this method when proper care is applied.

Brand, J. C.↗