Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Isotopic Signatures of Lithium Carbonate and Lithium Hydroxide Monohydrate Measured Using Raman Spectroscopy

Lithium isotopic ratios have wide ranging applications as chemical signatures, including improved understanding of geochemical processes and battery development. Measurement of isotope ratios using optical spectroscopies would provide an alternative to traditional mass spectrometric methods, which are expensive and often limited to a chemical laboratory. In this work, Raman spectra of 7 Li 2 CO 3 , 6 Li 2 CO 3 , 7 LiOH*H 2 O and 6 LiOH*H 2 O have been measured to determine the effect of lithium isotope substitution on the Raman molecular vibrations. Thirteen peaks were observed in the spectrum of lithium carbonate, with discernable isotopic shifts occurring in eleven of the thirteen vibrations, two of which have not been previously reported in the literature. The spectrum of lithium hydroxide monohydrate contained nine peaks, with discernable isotopic shifts occurring in eight of the nine vibrations, four of which have not been previously reported in the literature. The Raman spectral data reported here for lithium carbonate and lithium hydroxide monohydrate are in agreement with the previously reported works in the literature, in which the Raman active modes of these molecules were first identified and assigned. However, due to the stability and resolution of the detection system used in this work, isotopic shifts with a magnitude less than one wavenumber have been identified. Principal Component Regression was used to evaluate the sensitivity to isotopic content of small Raman peak shifts in Li 2 CO 3 and indicates differences greater than 2 atom-% could be reliably determined. These measurements add to the body of work on lithium isotope Raman spectroscopy for these two compounds and increases the number of Raman bands which could be used for lithium isotope content analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Relative Detectability of Iron-Bearing Phases for the Mars 2020 Sherloc Deep UV Raman Instrument: 1. Focusing on Carbonates

A deep ultraviolet (DUV) Raman and fluorescence instrument is a surface standoff instrument mounted on the robotic arm of the Mars 2020 (M2020) rover Perseverance, and it is a key element of the Scanning Habitable Environments with Luminescence for Organics and Chemicals (SHERLOC) investigation [1]. Measurement and science objectives include mineralogical and organic images (~100 μm/pixel) that map sub-millimeter spatial distributions and characterization of primary and secondary minerals, potential organics, and their interaction/alteration products. The results of data analysis pertain to understanding igneous and alteration processes on Mars through time, assessing habitability, evidencing in situ biosignatures, and, along with results from other Perseverance instruments, selecting samples to cache for Mars sample return. Acceptance of the SHERLOC investigation for the NASA M2020 mission [2] created a need for Mars-relevant DUV Raman spectra, particularly for inorganic materials [e.g., 3, 4]. As reported previously [e.g., 4, 5], phases with Fe cations as essential elements (e.g., siderite (FeCO3) and ankerite (FeCa(CO3)2) for carbonates) significantly hinder detection by DUV Raman because of intense absorption of incident and scattered DUV laser radiation by Fe cations. We report here the relative detectability of carbonates (Mg,Ca,Fe,Mn)CO3 by DUV Raman using a SHERLOC analog laboratory instrument.

R V Morris↗

Direct Identification of Mixed-Metal Centers in Metal–Organic Frameworks: Cu 3 (BTC) 2 Transmetalated with Rh 2+ Ions

Raman spectroscopy was used to establish direct evidence of heterometallic metal centers in a metal–organic framework (MOF). The Cu 3 (BTC) 2 MOF HKUST-1 (BTC 3– = benzenetricarboxylate) was transmetalated by heating it in a solution of RhCl 3 to substitute Rh 2+ ions for Cu 2+ ions in the dinuclear paddlewheel nodes of the framework. In addition to the Cu–Cu and Rh–Rh stretching modes, Raman spectra of (Cu x Rh 1– x ) 3 (BTC) 2 show the Cu–Rh stretching mode, indicating that mixed-metal Cu–Rh nodes are formed after transmetalation. Density functional theory studies confirmed the assignment of a Raman peak at 285 cm –1 to the Cu–Rh stretching vibration. Electron paramagnetic resonance spectroscopy experiments further supported the conclusion that Rh 2+ ions are substituted into the paddlewheel nodes of Cu 3 (BTC) 2 to form an isostructural heterometallic MOF, and electron microscopy studies showed that Rh and Cu are homogeneously distributed in (Cu x Rh 1– x ) 3 (BTC) 2 on the nanoscale.

02 PETROLEUM↗

The effects of thickness, polarization, and strain on vibrational modes of 2D Fe 3 GeTe 2

In this study, we investigated the effects of thickness, light polarization, and strain on the Raman spectra of two-dimensional (2D) Fe 3 GeTe 2 (FGT) crystals synthesized via chemical vapor transport. The crystals are thoroughly characterized using a combination of microscopic, diffraction, and spectroscopic techniques. Particularly, a systematic angle-resolved polarized Raman spectroscopy study reveals a clear polarization dependence of the Raman intensity in both parallel and crossed polarization directions, with the $A$$^{1}_{g}$ mode completely disappearing in the crossed polarization direction. The angle-dependent intensity of both the $A$$^{1}_{g}$ and $E$$^{2}_{2g}$ modes in parallel polarization and the intensity of the $E$$^{2}_{2g}$ mode in the crossed polarization remain constant at all angles. These findings align with predictions from Raman tensor analysis, providing compelling evidence for the unambiguous assignment of the $A$$^{1}_{g}$ and $E$$^{2}_{2g}$ modes to specific peaks observed in the Raman spectrum of FGT, resolving existing confusion in the literature regarding their assignment. Furthermore, we examine the effect of strain on the Raman spectrum of 2D FGT in-situ using a bending device. Our study, conducted on a monolayer to few-layer 2D FGT deposited onto polyethylene terephthalate and subjected to outward (inward), i.e., tensile (compressive) bending, demonstrates appreciable downshifting (upshifting) of the Raman peak position of both $A$$^{1}_{g}$ and $E$$^{2}_{2g}$ modes. Furthermore, these findings are particularly significant given that strain engineering represents an effective approach to modulate the magnetic properties of FGT and other 2D magnetic materials.

2D materials↗

Raman spectroscopy and x-ray diffraction of sp 3 CaC O 3 at lower mantle pressures

The exceptional ability of carbon to form sp 2 and sp 3 bonding states leads to a great structural and chemical diversity of carbon-bearing phases at nonambient conditions. Here we use laser-heated diamond-anvil cells combined with synchrotron x-ray diffraction, Raman spectroscopy, and first-principles calculations to explore phase transitions in CaC O 3 at P > 40 GPa . We find that postaragonite CaC O 3 transforms to the previously predicted P 2 1 / c CaC O 3 with sp 3 -hybridized carbon at 105 GPa ( ~ 30 GPa higher than the theoretically predicted crossover pressure). The lowest-enthalpy transition path to P2 1 / c CaC O 3 includes reoccurring sp 2 and sp 3 CaC O 3 intermediate phases and transition states, as revealed by our variable-cell nudged-elastic-band simulation. Raman spectra of P 2 1 / c CaC O 3 show an intense band at 1025 c m -1 , which we assign to the symmetric C-O stretching vibration based on empirical and first-principles calculations. This Raman band has a frequency that is ~ 20 % low-ymmetric C-O stretching in sp 2 CaC O 3 due to the C-O bond length increase across the sp 2 ~ sp 3 transition and can be used as a fingerprint of tetrahedrally coordinated carbon in other carbonates.

36 MATERIALS SCIENCE↗

Effect of X-ray beam on the molecular–topological structure of the surface of kynar® polyvinylidene fluoride resin

Thermomechanical analysis of poly(vinylidene fluoride) (PVDF) film shows that, unlike the completely amorphous structure of the native polymer, after irradiation with X-rays, the weight fraction of the crystalline modification in the polymer is 0.5. The initial PVDF film had a linear thermal expansion coefficient of α 1 = 11.33х10 5 K -1 and a glass transition temperature of T g =256 K. An efficient conversion of the amorphous structures of the polymer pseudo-network into crystalline networks occurs under X-ray irradiation. The irradiated polymer exhibits amorphous ( T g =239 K) and crystalline topological blocks ( T m =385 K). The presence of polyenyl and alkyl radicals is found in the electron paramagnetic resonance (EPR) spectra of the irradiated polymer. Lines with a splitting of 3.3 m T can be observed at the edges of the EPR spectra, consistent with radical centers like -CF 2 -C • H-CF 2 - . At high doses of radiolysis, polyenyl radicals are the main observed radicals. The macromolecular chains contain all three (α, β, γ) morphologies of the polymer. The Raman spectra show that X-ray irradiation can lead to carbonization and the formation of unsaturated bonds. Electronic structure calculations were used to aid in the analysis of the observed spectra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanochemical induced structural changes in sucrose using the rotational diamond anvil cell

The response of sucrose to high-pressure and shear conditions has been studied in a rotational diamond anvil cell. Previous experiments conducted by Bridgman and Teller showed divergent behavior in regard to the existence of a rheological explosion under mechanochemical stimuli. Raman spectroscopy confirmed the existence of the isostructural Phase I to Phase II transition near 5 GPa. When subjected to high-pressure and shear, Raman spectra of Phase I showed evidence that while the sucrose molecule underwent significant molecular deformation, there was no evidence of a complete chemical reaction. In contrast, Phase II showed a near-total loss of the in-situ Raman signal in response to shear, suggesting the onset of amorphization or decomposition. The divergent behaviors of Phase I and Phase II are examined in light of the differences in the hydrogen bonding and plasticity of the material.

Ciezak-Jenkins, Jennifer A. (ORCID:000000027866353↗

Characterization of Organic Materials in the Xenolithic Clasts in Sharps (H3.4) Meteorite Using Micro-Raman Spectroscopy

Graphitization of carbon is an irreversible process which alters the structure of graphitic materials in response to the increase in metamorphic grade (temperature and/or pressure). Carbonaceous materials offer a reliable geothermometer as their Raman spectra change systematically with increasing metamorphic grade. In this study, we identified carbonaceous materials in the xenolithic clasts in Sharps and interpreted their metamorphic history by revealing the structural organization (order) of the polyaromatic organic phases using micro-Raman spectroscopy.

Chan, Q. H. S.↗

Structures, spectroscopic studies and solid-state thermal transformations of coordination polymers from P{sub 4}Se{sub 3} and CuX (X=Cl, Br, I)

The formation of coordination polymers (CuCl)P{sub 4}Se{sub 3} (1), (CuBr){sub 3}(P{sub 4}Se{sub 3}){sub 2} (2), (CuI){sub 3}(P{sub 4}Se{sub 3}){sub 2} (3) and (CuI)P{sub 4}Se{sub 3} (4), from solutions of copper(I) halides and P{sub 4}Se{sub 3} by diffusion methods has been studied. The new compounds were characterized by X-ray crystallography, solid-state {sup 31}P MAS NMR and Raman spectroscopy. Theoretical studies on the DFT level in the crystalline phase allowed the unequivocal assignment of the recorded Raman shifts between 200 and 480 cm{sup -1}. The structure of 1 consists of a 2D network of castellated [CuCl]{sub n} chains and bidentate P{sub 4}Se{sub 3} molecules. The 3D network of 2 comprises [CuBr]{sub n} chains, which are linked by tridentate P{sub 4}Se{sub 3} molecules. Compound 3 is a three-dimensional polymer composed of four-membered (CuI){sub 2} rings and castellated [CuI]{sub n} chains, which are linked by tridentate P{sub 4}Se{sub 3} molecules involving two basal and the apical P atoms. Thermal conversion of 1 at 230 deg. C gives (CuCl){sub 3}(P{sub 4}Se{sub 3}){sub 2} (5), which is isostructural with 2. The thermal conversion of (CuI){sub 3}P{sub 4}S{sub 3}, which was studied for comparison gave at 371 deg. C (CuI){sub 3}P{sub 4}S{sub 4}, Cu{sub 3}PS{sub 4} and small amounts of Cu{sub 6}PS{sub 5}I. - Graphical Abstract: New coordination polymers have been prepared and characterized by the reaction of P{sub 4}Se{sub 3} and copper(I) halides solutions under diffusion conditions. Highlights: > Coordination polymers from P{sub 4}Se{sub 3} and copper(I) halide are described. > Solid-state phases are prepared from solution by interdiffusion techniques. > One-, two- and three-dimensional polymers are formed. > Up to three P atoms are involved in coordination to copper. > Application of {sup 31}P MAS NMR spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photoinduced charge-transfer process in rubidium manganese hexacyanoferrate probed by Raman spectroscopy

The photoinduced charge-transfer process in Rb{sub 0.94}Mn[Fe(CN){sub 6}]{sub 0.98}{center_dot}0.2H{sub 2}O is investigated by observing the valence states of the metal ions by Raman spectroscopy. The sample in the high-temperature phase is irradiated at the ligand to metal, CN{sup -}{yields}Fe(III) and charge-transfer band ({lambda}=395 nm). The Fe(III)-CN-Mn(II) pair valence state corresponding to the high-temperature configuration is totally depleted after prolonged irradiation, and the Fe(II)-CN-Mn(III) pair valence state corresponding to the low-temperature configuration appears. In addition, two kinds of CN stretching modes, ascribed to Fe(II)-CN-Mn(II) and Fe(III)-CN-Mn(III) pair valence states, are found. The photoproduction process of each pair valence states is well reproduced by a kinetic model assuming a charge transfer from Mn(II) to Fe(III). During irradiation, continuous shifts of the Raman peaks are found and ascribed to a release of the strain due to the lattice mismatching between the high-temperature and the photoinduced phases. This behavior indicates that the photoinduced phase created locally in the high-temperature-phase lattice grows up to a photoinduced phase domain. The conversion efficiency is lowered with decreasing temperature, indicating the existence of an energy barrier. We propose a model, which can explain the existence of an energy barrier in the electronic excited state.

36 MATERIALS SCIENCE↗

Plasma treatment of multiwall carbon nanotubes for dispersion improvement in water

Microwave excited Ar/H{sub 2}O surface-wave plasma was used to treat multiwall carbon nanotubes (MWCNTs) to modify their surface characteristics and thus improve their dispersion capability in water. Changes in the atom composition and structure properties of MWCNTs were analyzed using x-ray photoelectron spectroscopy and Raman spectroscopy, and the surface morphology of MWCNTs was observed by field emission scanning electron microscopy and scanning transmission electron microscopy. The results indicated that Ar/H{sub 2}O plasma treatment greatly enhanced the content of oxygen, and modified surface microstructure properties. The integrity of nanotube patterns, however, was not damaged.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Luminescence and Raman studies of YNbO{sub 4} phosphors doped by Eu{sup 3+}, Ga{sup 3+}, and Al{sup 3+}

Efficient phosphors based on YNbO{sub 4} and doped by Eu{sup 3+}, Ga{sup 3+}, and Al{sup 3+} were synthesized with different fluxes under different thermal conditions and investigated under x-ray excitation and Raman spectroscopy. The samples codoped by Al{sup 3+} and Ga{sup 3+} show higher intensity under x-ray excitation in comparison with YNbO{sub 4}:Eu{sup 3+} phosphors. The model of redistribution energy transfer from {sup 5}D{sub 1} level to {sup 7}F{sub J} is proposed. Monoclinic fergusonite crystal structure and excellent luminescent properties under x-ray excitation allow recommend these phosphors as good candidates for different applications.

36 MATERIALS SCIENCE↗

Influence of Zr doping on the structure and ferroelectric properties of BiFeO{sub 3} thin films

We have prepared thin films of BiFe{sub 1-x}Zr{sub x}O{sub 3}(x=0.0-0.15) by chemical solution deposition on Pt/Si substrates. Structural characterization of the films using x-ray diffraction and Raman spectroscopy suggests lattice distortion upon doping for x<0.15. This also appears to be the limit for pure phase formation. Ferroelectric measurements reveal that Zr doping leads to reduction in the remnant polarization and an increase in the coercive field, attributed to lattice distortion. Dielectric measurements indicate that the doped compositions exhibit absence of low frequency relaxation, usually associated with defects and grain boundaries. Absence of Fe{sup 2+} in our films was verified using x-ray photoelectron spectroscopy. Role of Zr in controlling the film's properties has been explained in terms of changes in the bond strength.

36 MATERIALS SCIENCE↗

Effect of low energy ion irradiation on CdTe crystals: Luminescence enhancement

In this work we show that low energy ion sputtering is a very efficient technique as a cleaning process for CdTe substrates. We demonstrate, by using several techniques like grazing-angle x-ray diffraction, cathodoluminescence, microluminescence, and micro-Raman spectroscopy that the luminescent properties of CdTe substrates can be very much increased when CdTe surfaces are irradiated with low energy Argon ions. We postulate that this enhancement is mainly due to the removal of surface damage induced by the cutting and polishing processes. The formation of a low density of nonluminescent aggregates after the sputtering process has also been observed.

36 MATERIALS SCIENCE↗

Synthesis of few-layered graphene by H{sub 2}O{sub 2} plasma etching of graphite

Herein, we reported an approach to synthesize few-layered graphene by etching of the graphite using H{sub 2}O{sub 2} plasma technique. The synthesized few-layered graphene was characterized by scanning electron microscopy, atomic force microscopy, Raman spectroscopy, and x-ray photoelectron spectroscopy (XPS). The analysis showed that few-layered graphene was formed in high quality level. The XPS analysis suggested that H{sub 2}O{sub 2} plasma etching of graphite could oxidize graphene and generated -C-OH and >C=O groups on the graphene surfaces. The H{sub 2}O{sub 2} plasma technique is an easy and environmental friendly method to synthesize few-layered graphene from the graphite.

36 MATERIALS SCIENCE↗

Synthesis of higher diamondoids by pulsed laser ablation plasmas in supercritical CO{sub 2}

Pulsed laser ablation (wavelength 532 nm; fluence 18 J/cm{sup 2}; pulse width 7 ns; repetition rate 10 Hz) of highly oriented pyrolytic graphite was conducted in adamantane-dissolved supercritical CO{sub 2} with and without cyclohexane as a cosolvent. Micro-Raman spectroscopy of the products revealed the presence of hydrocarbons possessing sp{sup 3}-hybridized carbons similar to diamond structures. The synthesis of diamantane and other possible diamondoids consisting of up to 12 cages was confirmed by gas chromatography-mass spectrometry. Furthermore, gas chromatography-mass spectrometry measurements of samples before and after pyrolysis treatment indicate the synthesis of the most compact decamantane, namely, superadamantane. It is thought that oxidant species originating from CO{sub 2} during pulsed laser ablation might lead to the selective dissociation of C-H bonds, enabling the synthesis of low H/C ratio molecules. Therefore, laser ablation in supercritical CO{sub 2} is proposed as a practical method for synthesizing diamondoids.

36 MATERIALS SCIENCE↗

Theory of time-resolved Raman scattering in correlated systems: Ultrafast engineering of spin dynamics and detection of thermalization

Ultrafast characterization and control of many-body interactions and elementary excitations are critical to understanding and manipulating emergent phenomena in strongly correlated systems. In particular, spin interaction plays an important role in unconventional superconductivity, but efficient tools for probing spin dynamics, especially out of equilibrium, are still lacking. To address this question, we develop a theory for nonresonant time-resolved Raman scattering, which can be a generic and powerful tool for nonequilibrium studies. We also use exact diagonalization to simulate the pump-probe dynamics of correlated electrons in the square-lattice single-band Hubbard model. Different ultrafast processes are shown to exist in the time-resolved Raman spectra and dominate under different pump conditions. For high-frequency and off-resonance pumps, we show that the Floquet theory works well in capturing the softening of bimagnon excitation. By comparing the Stokes and anti-Stokes spectra, we also show that effective heating dominates at small pump fluences, while a coherent many-body effect starts to take over at larger pump amplitudes and frequencies on resonance to the Mott gap. In conclusion, time-resolved Raman scattering thereby provides the platform to explore different ultrafast processes and design material properties out of equilibrium.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗