Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RADIAL DISTRIBUTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Guaranteed Phase & Topology Identification in Three Phase Distribution Grids

We present a method for joint phase identification and topology recovery in unbalanced three phase radial networks using only voltage measurements. By recovering phases and topology jointly, we utilize all three phase voltage measurements and can handle networks where some buses have a subset of three phases. Our method is theoretically justified by a novel linearized formulation of unbalanced three phase power flow and makes precisely defined and reasonable assumptions on line impedances and load statistics. We validate our method on three IEEE test networks simulated under realistic conditions in OpenDSS, comparing our performance to the state of the art. In addition to providing a new method for phase and topology recovery, our intuitively structured linearized model will provide a foundation for future work in this and other applications.

42 ENGINEERING↗

The Escape Velocity Profile of the Milky Way from Gaia DR3

Abstract The escape velocity profile of the Milky Way offers a crucial and independent measurement of its underlying mass distribution and dark matter (DM) properties. Using a sample of stars from the third data release of Gaia with 6D kinematics and strict quality cuts, we obtain an escape velocity profile of the Milky Way from 4 to 11 kpc in Galactocentric radius. To infer the escape velocity in radial bins, we model the tail of the stellar speed distribution with both traditional power-law models and a new functional form that we introduce. While power-law models tend to rely on extrapolation to high speeds, we find our new functional form gives the most faithful representation of the observed distribution. Using this for the escape velocity profile, we constrain the properties of the Milky Way’s DM halo modeled as a Navarro–Frenck–White profile. Combined with constraints from the circular velocity at the solar position, we obtain a concentration and mass of c 200 c DM = 13.9 − 4.3 + 6.2 and M 200 c DM = 0.55 − 0.14 + 0.15 × 10 12 M ⊙ . This corresponds to a total Milky Way mass of M 200 c = 0.64 − 0.14 + 0.15 × 10 12 M ⊙ , which is on the low end of the historic range of the galaxy’s mass, but in line with other recent estimates.

Astronomy & Astrophysics↗

Three-dimensional analysis of 0/90s and 90/0s laminates with a central circular hole

Stress distributions were calculated near a circular hole in laminates, using a three dimensional finite element analysis. These stress distributions were presented three ways: through the thickness at the hole boundary, along radial lines at the 0/90 and 90/0 interfaces, and around the hole at these interfaces. The interlaminar normal stress, and the shear stress, distributions had very steep gradients near the hole boundary, suggesting interlaminar stress singularities. The largest compressive stress occurred at about 60 deg from the load axis. A simple procedure was introduced to calculate interlaminar stresses near the hole boundary. It used stresses calculated by an exact two dimensional analysis of a laminate with a hole as input to a quasi three dimensional model. It produced stresses that agreed closely with those from the three dimensional finite element model.

Raju, I. S.↗

Towards quantifying the impact of triaxiality on optical signatures of galaxy clusters: weak lensing and galaxy distributions

ABSTRACT We present observational evidence of the impact of triaxiality on radial profiles that extend to 40 Mpc from galaxy cluster centres in optical measurements. We perform a stacked profile analysis from a sample of thousands of nearly relaxed galaxy clusters from public data releases of the Dark Energy Survey and the Dark Energy Camera Legacy Survey. Using the central galaxy elliptical orientation angle as a proxy for galaxy cluster orientation, we measure cluster weak lensing and excess galaxy density axis-aligned profiles, extracted along the central galaxy’s major or minor axes on the plane of the sky. Our measurements show a ≳ 2σ–3σ difference per radial bin between the normalized axis-aligned profiles. The profile difference between each axis-aligned profile and the azimuthally averaged profile ($\sim \pm 10\,\rm per\ cent-20~{{\ \rm per\ cent}}$ along major/minor axis) appears inside the clusters (∼0.4 Mpc) and extends to the large-scale structure regime (∼10–20 Mpc). The magnitude of the difference appears to be relatively insensitive to cluster richness and redshift, and extends further out in the weak lensing surface mass density than in the galaxy overdensity. Looking forward, this measurement can easily be applied to other observational or simulation data sets and can inform the systematics in cluster mass modelling related to triaxiality. We expect imminent upcoming wide-area deep surveys, such as the Vera C. Rubin Observatory’s Legacy Survey of Space and Time, to improve our quantification of optical signatures of cluster triaxiality.

79 ASTRONOMY AND ASTROPHYSICS↗

Hot ion plasma heating experiments in SUMMA

Initial results are presented for the hot-ion plasma heating experiments conducted in the new SUMMA (superconducting magnetic mirror apparatus) at NASA Lewis Research Center. A discharge is formed by applying a radially inward dc electric field between cylindrical anodes and hallow cathodes located at the peak of the mirrors. Data were obtained at midplane magnetic field strengths from 1.0 to 3.5 tesla. Charge-exchange neutral particle energy analyzer data were reduced to ion temperatures using a plasma model that included a Maxwellian energy distribution superimposed on an azimuthal drift, finite ion orbits, and radial variations in density and electric field. The best ion temperatures in a helium plasma were 5 keV and in hydrogen the H2(+) and H(+) ions were 1.2 keV and 1 keV respectively. Optical spectroscopy line broadening measurements yielded ion temperatures about 50 percent higher than the charge-exchange neutral particle analyzer results. Spectroscopically obtained electron temperature ranged from 3 to 30 eV. Ion temperature was found to scale roughly linearly with the ratio of power input-to-magnetic field strength, P/B.

Reinmann, J. J.↗

Zonal magnetic fields regulate nonlinear edge-localized-mode dynamics via self-consistent force balance

Edge-localized modes (ELMs) eject intense bursts of heat and particles that threaten plasma-facing components in fusion reactors. Nonlinear full-torus BOUT++ simulations show that turbulence-driven zonal magnetic fields (ZMFs) play an essential role in nonlinear ELM evolution by maintaining self-consistent force balance. Zonal flows mitigate the initial crash through shear but do not prevent continued radial transport. When ZMFs are self-consistently included, turbulence-driven zonal currents modify the parallel current distribution and magnetic tension and are associated with a reduction of the axisymmetric (𝑛 = 0) perturbed radial force imbalance. This coincides with a transition from convective, bursty propagation to more localized, diffusive transport. Similar behavior is observed across the regimes considered, including both resistive-ballooning and peeling-ballooning cases. Finally, associated signatures, including radial electric field shear and parallel current redistribution, provide experimentally accessible diagnostics for present devices and ITER-relevant conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Size-frequency distributions of EH3 chondrules

Size-frequency distributions of chondrules in three EH3 chondrites, namely Qingzhen, Kota-Kota and ALHA77156, are presently determined. Radial pyroxene chondrules are larger than cryptocrystalline chondrules, while nonporphyritic chondrules have a broader size-frequency distribution than the porphyritic, and porphyritic olivine-pyroxene chondrules are larger than porphyritic pyroxene chondrules. This last result is due to a reaction of fine-grained olivine with free silica to form pyroxene during mild thermal metamorphism of the whole-rocks.

Rubin, Alan E.↗

Ion and electron angular distributions in the Io torus region of the Jovian magnetosphere

Angular distributions are presented of ion (about 0.5-2 MeV) and electron (greater than 10 MeV) fluxes measured during the Voyager 1 spacecraft passage through the inner regions of the Jovian magnetosphere. In the regions of peak flux intensities, just outside the orbit of Io, the ion angular distributions are most sharply peaked at 90 deg local pitch angle, a configuration consistent with diffusion of the particles inward from large radial distances. Inside the orbit of Io the lower-energy ions exhibit angular distributions depleted at 90 deg local pitch angles, suggesting the possibility of charge-exchange scattering loss of these particles. In the vicinity of the Io flux tube, no significant effect is observed in the flux or pitch angle distributions of the ions. The relativistic electrons are depleted in the flux tube region and exhibit an asymmetrical pitch angle distribution, with more electrons appearing to arrive from the equatorial region (the direction of Io) than from the low-altitude mirror point.

Lanzerotti, L. J.↗

Streaming Instability with Multiple Dust Species – II. Turbulence and Dust–Gas Dynamics at Non-Linear Saturation

The streaming instability is a fundamental process that can drive dust–gas dynamics and ultimately planetesimal formation inprotoplanetary discs. As a linear instability, it has been shown that its growth with a distribution of dust sizes can be classifiedinto two distinct regimes, fast- and slow-growth, depending on the dust-size distribution and the total dust-to-gas density ratio. Using numerical simulations of an unstratified disc, we bring three cases in different regimes into non-linear saturation. Wefind that the saturation states of the two fast-growth cases are similar to its single-species counterparts. The one with maximumdimensionless stopping timeτs,max=0.1 and=2 drives turbulent vertical dust–gas vortices, while the other withτs,max=2and=0.2 leads to radial traffic jams and filamentary structures of dust particles. The dust density distribution for the former isflat in low densities, while the one for the latter has a low-end cut-off. By contrast, the one slow-growth case results in a virtuallyquiescent state. Moreover, we find that in the fast-growth regime, significant dust segregation by size occurs, with large particlesmoving towards dense regions while small particles remain in the diffuse regions, and the mean radial drift of each dust speciesis appreciably altered from the (initial) drag-force equilibrium. The former effect may skew the spectral index derived frommultiwavelength observations and change the initial size distribution of a pebble cloud for planetesimal formation. The latteralong with turbulent diffusion may influence the radial transport and mixing of solid materials in young protoplanetary discs.

Chao-chin Yang↗

Spatial distribution of energetic plasma sheet electrons.

The spatial distribution of energetic plasma sheet electrons (E greater than 50 keV) out to a radial distance of 24 earth radii using data from electron spectrometer and fluxgate magnetometer experiments on Ogo 5 is presented. A comparison of distributions in geocentric solar magnetospheric coordinates (GSM) prepared with and without the use of a neutral sheet model indicates that the use of such a model facilitates organization of plasma sheet data. The percentage of flux occurrence above a given flux threshold falls off rapidly with distance from the neutral sheet. Contours of constant percentage of occurrence diverge slightly from the neutral sheet at local times away from midnight. This effect decreases with increasing flux threshold.

Walker, R. J.↗

Interpretation of neutral particle analyzer measurements on plasmas having azimuthal drift

The theoretical model accounts for drift and cyclotron components of ion motion in a partially ionized plasma. Density and velocity distributions are systematically prescribed. The flux into the neutral particle analyzer (NPA) from this plasma is determined by summing over all charge exchange neutrals in phase space which are directed into apertures. Calculation of the process is continued through the NPA using appropriate cross section data to obtain analyzer output distributions. Theoretical results were compared with NPA measurements on four plasma heating devices having radial electric, E, and axial magnetic, B, fields. Drift velocity, in the azimuthal direction is identified with E/B. Selection of randomized cyclotron velocity distributions about mean azimuthal drift yield energy distributions which compare well with experiment.

Englert, G. W.↗

A Proton-Cyclotron Wave Storm Generated by Unstable Proton Distribution Functions in the Solar Wind

We use audification of 0.092 seconds cadence magnetometer data from the Wind spacecraft to identify waves with amplitudes greater than 0.1 nanoteslas near the ion gyrofrequency (approximately 0.1 hertz) with duration longer than 1 hour during 2008. We present one of the most common types of event for a case study and find it to be a proton-cyclotron wave storm, coinciding with highly radial magnetic field and a suprathermal proton beam close in density to the core distribution itself. Using linear Vlasov analysis, we conclude that the long-duration, large-amplitude waves are generated by the instability of the proton distribution function. The origin of the beam is unknown, but the radial field period is found in the trailing edge of a fast solar wind stream and resembles other events thought to be caused by magnetic field footpoint motion or interchange reconnection between coronal holes and closed field lines in the corona.

instabilities - plasmas↗

Radar Reconnaissance of Near-Earth Asteroids

Groundbased radar observations of NEAs can help identify space resources with commercial potential and can dramatically reduce the cost and risk of the initial spacecraft missions to those objects. The near-Earth asteroid (NEA) population is thought to contain approximately 1500 objects as large as a kilometer, approximately 300,000 as large as 100 meters, and more than 100,000,000 as large as 10 meters. More than 10% of the NEAs are more accessible in terms of mission delta-V (i.e., fuel required) than the Moon, Mars, or the moons of Mars. Fewer than 1000 NEAs have been found, but the discovery rate is increasing rapidly. Once an asteroid is discovered (necessarily by wide-field optical telescopes), radar can provide otherwise unavailable information about its size, shape, spin state, and surface properties if it approaches within the range of the Goldstone (California) or Arecibo (Puerto Rico) radar telescopes. Asteroids generally appear as unresolved points through groundbased optical telescopes, but radar measurements of the distribution of echo power in time delay (range) and Doppler frequency (radial velocity) can yield images with resolution as fine as a decameter. Image sequences that furnish adequate orientational coverage can be inverted to construct geologically detailed 3-D models, to define the rotation state precisely, and to constrain the object's internal density distribution. Estimates of radar scattering properties characterize the surface's cm-to-m-scale roughness as well as its bulk density, which for asteroids depends primarily on porosity and metal concentration. A useful spin-off of radar detection is orbit refinement that simplifies navigation of flyby and rendezvous spacecraft.

Ostro, S. J.↗

Radar Reconnaissance of Near-Earth Asteroids

Groundbased radar observations of NEAs can help identify space resources with commercial potential and can dramatically reduce the cost and risk of the initial spacecraft missions to those objects. The near Earth asteroid (NEA) population is thought to contain approx. 1500 objects as large as a kilometer, approx. 300,000 as large as 100 meters, and more than 100,000,000 as large as 10 meters. More than 10% of the NEAs are more accessible in terms of mission delta-V (i.e., fuel required) than the Moon, Mars, or the moons of Mars. Fewer than 1000 NEAs have been found, but the discovery rate is increasing rapidly. Once an asteroid is discovered (necessarily by wide-field optical telescopes), radar can provide otherwise unavailable information about its size, shape, spin state, and surface properties if it approaches within the range of the Goldstone (California) or Arecibo (Puerto Rico) radar telescopes. Asteroids generally appear as unresolved points through groundbased optical telescopes, but radar measurements of the distribution of echo power in time delay (range) and Doppler frequency (radial velocity) can yield images with resolution as fine as a decameter. Image sequences that furnish adequate orientational coverage can be inverted to construct geologically detailed 3-D models, to define the rotation state precisely, and to constrain the object's internal density distribution. Estimates of radar scattering properties characterize the surface's cm-to-m-scale roughness as well as its bulk density, which for asteroids depends primarily on porosity and metal concentration. A useful spin-off of radar detection is orbit refinement that simplifies navigation of flyby and rendezvous spacecraft.

Ostro, S. J.↗

Calculation of Dose Deposition in 3D Voxels by Heavy Ions

The biological response to high-LET radiation is very different from low-LET radiation, and can be partly attributed to the energy deposition by the radiation. Several experiments, notably detection of gamma-H2AX foci by immunofluorescence, has revealed important differences in the nature and in the spatial distribution of double-strand breaks (DSB) induced by low- and high-LET radiations. Many calculations, most of which are based on amorphous track models with radial dose, have been combined with chromosome models to calculate the number and distribution of DSB within nuclei and chromosome aberrations. In this work, the Monte-Carlo track structure simulation code RITRACKS have been used to calculate directly the energy deposition in voxels (3D pixels). A cubic volume of 5 micrometers of side was irradiated by 1) 450 (1)H+ ions of 300 MeV (LET is approximately 0.3 keV/micrometer) and 2) by 1 (56)Fe26+ ion of 1 GeV/amu (LET is approximately 150 keV/micrometer). In both cases, the dose deposited in the volume is approximately 1 Gy. All energy deposition events are recorded and dose is calculated in voxels of 20 micrometers of side. The voxels are then visualized in 3D by using a color scale to represent the intensity of the dose in a voxel. This simple approach has revealed several important points which may help understand experimental observations. In both simulations, voxels which receive low dose are the most numerous, and those corresponding to electron track ends received a dose which is in the higher range. The dose voxels are distributed randomly and scattered uniformly within the volume irradiated by low-LET radiation. The distribution of the voxels shows major differences for the (56)Fe26+ ion. The track structure can still be seen, and voxels with much higher dose are found in the region corresponding to the track "core". These high-dose voxels are not found in the low-LET irradiation simulation and may be responsible for DSB that are more difficult to repair. By applying a threshold on the dose visualization, voxels corresponding to electron track ends are evidenced and the spatial distribution of voxels is very similar to the distribution of DSB observed in gamma H2AX experiments, even if no chromosomes have been included in the simulation. Furthermore, this work has shown that a significant dose is deposited in voxels corresponding to electron track ends. Since some delta-rays from iron ion can travel several millimeters, they may also be of radiobiological importance.

Plante, Ianik↗

An innovative and alternative approach toward gear fabrication

In this paper, we present the first demonstration of single-step gear manufacturing via an innovative in-situ friction stir forging approach. This novel process is a natural extension to the friction stir processing technique and relies on shear and normal stresses to form the complex shapes. Friction stir welding pin tool with shoulder is plunged at high revolutions per minute (rpm) into the sample to heat it to the desired temperature and enable plastic flow. Then, the tool is forged at high plunge rate to form the desired structurally-sound and defect free complex shapes. To better visualize the process the experiments are complemented by a 3D thermomechanically coupled, smoothed particle hydrodynamics (SPH) model to understand the material flow pattern both radially and through thickness in the gear teeth, plastic strain distribution, and temperature profile. We have demonstrated application of I-FSF to inherently poor formable AZ31 Mg, AA 7075-T6, and AA5083–10 vol% TiB 2 composite and fabricated 14-tooth spur gears from these materials with minimal farther machining. In conclusion, microstructure of the forged gears exhibited a directional material flow pattern due to the normal forging action and refinement of grains to 6–13 μm through dynamically recrystallization across the radial, through-thickness direction, which is in good agreement with the corresponding SPH simulation results.

42 ENGINEERING↗

Point Defect Distributions in ZnSe Crystals: Effects of Gravity Vector Orientation during Physical Vapor Transport Growth

ZnSe crystals were grown by the physical vapor transport technique under horizontal and vertical (stabilized and destabilized) configurations. Secondary ion mass spectroscopy and photoluminescence measurements were performed on the ZnSe samples to map the distributions of [Si], [Fe], [Cu], [Al] and [Li or Na] impurities as well as Zn vacancy, [V(zn)]. The annealings of ZnSe under controlled Zn pressures were studied to correlate the measured photoluminescence emission intensity to the equilibrium Zn partial pressure. In the horizontal grown crystals the segregations of [Si], [Fe], [Al] and [V(zn)] along the gravity vector direction were observed whereas in the vertically stabilized grown crystal the segregations of these point defects were radially symmetrical. No apparent pattern was observed on the measured distributions in the vertically destabilized grown crystal. The observed segregations in the three growth configurations were interpreted based on the possible buoyancy-driven convection in the vapor phase.

Su, Ching-Hua↗

Acoustic power measurement for single and annular stream duct-nozzle systems utilizing a modal decomposition scheme

A refined acoustic impulse technique was used to evaluate the adequacy of single point in-duct pressure measurements for determining the acoustic power for incident, reflected, and transmitted fields for single and annular stream duct-nozzle systems at various flow conditions. The spatial distributions of incident and reflected pressure fields were measured at several radial and azimuthal locations inside the duct. A modal decomposition scheme was used to derive the acoustic power of each duct mode from the complex pressure measurements. The total sums of these individual modal acoustic powers were compared with the area-weighted acoustic power distributions that were evaluated from measured pressure data. It was found that a single-point measurement near the duct wall is adequate for estimating the transmitted power for both single and annular stream duct-nozzle systems.

Salikuddin, M.↗