Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Process design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Additive Manufacturing in the Nuclear Reactor Industry

This article discusses the application of additive manufacturing in the nuclear reactor industry.Additive manufacturing for nuclear applications increased significantly in the late 2010s due to rapid progress in technology, particularly with methods using metals and ceramics.Because these manufacturing technologies are uniquely data-rich, they allow for an advanced understanding of materials, and they offer the potential to predict part performance based on build data. The inherent characteristics of additive manufacturing technologies allow for rapid prototyping and geometric freedom, making it possible to implement an accelerated agile design process for advanced nuclear reactor applications. Predictive high-fidelity multiphysics simulations are crucial to fully leverage this geometric flexibility. Qualification and regulator acceptance ultimately determine the breadth and scope of applications for these technologies. The US Department of Energy Office of Nuclear Energy Transformational Challenge Reactor program integrates many of these elements to accelerate the deployment of additive manufacturing technologies to industry.

Betzler, Benjamin↗

Characterization of transition carbides in quench and partitioned steel microstructures by Mössbauer spectroscopy and complementary techniques

Quenching and partitioning (Q&P) produces steel microstructures with martensite and austenite that exhibit promising property combinations for third generation advanced high strength steels. Understanding the kinetics of reactions that compete for available carbon, such as carbide formation, is critical for alloying and processing design and achieving austenite enrichment and retention during Q&P. Mössbauer effect spectroscopy (MES) was used to characterize Q&P microstructures in a 0.38C-1.54Mn-1.48Si wt.% steel after quenching to 225 °C and partitioning at 400 °C for 10 or 300 s, with an emphasis on transition carbides. The recoilless fraction for η-carbide was calculated and a correction for saturation of the MES absorption spectrum was applied, making quantitative measurements of small amounts of η-carbide, including non-stoichiometric η-carbide, possible in Q&P microstructures. Complementary transmission electron microscopy confirmed the presence of η-carbides, and MES and X-ray diffraction were used to characterize the austenite. The amount of η-carbide formed during Q&P ranged from 1.4 to 2.4 at.%, accounting for a substantial portion (~24% to 41%) of the bulk carbon content of the steel. The amount (5.0 at.%) of η-carbide that formed after quenching and tempering (Q&T) at 400 °C for 300 s was significantly greater than after partitioning at 400 °C for 300 s (2.4 at.%), suggesting that carbon partitioning from martensite to austenite occurs in conjunction with η-carbide formation during Q&P in these specimens.

36 MATERIALS SCIENCE↗

A transport-based framework for solidification cracking in Ni-based superalloys processed by laser powder bed fusion

Solidification cracking remains a persistent barrier to laser powder bed fusion (LPBF) processing of solid-solution-strengthened (SSS) Ni-based superalloys and is commonly attributed to carbide formation, liquation-type failure, or elemental segregation. In this work, the cracking behavior of three SSS Ni-based superalloys—Inconel 625 (625), Inconel 617 (617), and Haynes 230 (230)—is examined under comparable LPBF conditions to evaluate the origins of their cracking susceptibility. Carbides were present in both 625 and 230, yet cracking behavior differed significantly. MC-type carbides in 625 remain discrete and preserve liquid connectivity, whereas Cr-rich M23C6 carbides in 230 form at cellular triple junctions that bottleneck the interdendritic liquid network, influencing cracking through liquid connectivity rather than as an independent cause. Alloy 617 exhibited anomalous segregation without resolvable secondary phases yet cracked mildly, indicating that extensive carbide formation is not a prerequisite for cracking. To rationalize these observations, a transport-limited framework is proposed in which cracking occurs when terminal-liquid feeding cannot accommodate solidification-induced strain; among the mechanisms evaluated, this framework is most consistent with the physical constraints imposed by LPBF solidification. Transport-based crack-susceptibility indexes incorporating permeability, viscosity, and solidification kinetics distinguish the alloy hierarchy; permeability ratios Krat increased from approximately 7 (625) to 11.5 (617) and 14.5 (230), with corresponding increases in the μ-weighted mushy zone risk index (CSIMZRM). These results are consistent with transport-limited liquid feeding as a rate-limiting contributor to solidification cracking in LPBF-processed SSS Ni-based superalloys, providing a physically grounded basis for alloy and process design.

Hyer, Holden [ORNL] (ORCID:0000000343915561)↗

A fast, efficient direct slicing method for slender member structures

We describe a method for quickly and efficiently slicing structures consisting of a large number of slender members called struts connected at node positions called joints. Previous research on periodic lattice structures shows these structures are highly mechanically efficient with exceptionally high stiffness- and strength-to-weight ratios. Additive manufacturing technologies allow the construction slender member structures with complicated macroscale shapes. These structures could consist of thousands or millions of geometric primitives describing the struts. Structures with large numbers of geometric objects cause the conventional methods for manipulating, storing, and slicing the geometry of these parts via STL files to be highly inefficient. This work describes an alternate design process for slender member structures using efficient methods for manipulating, storing, and slicing the geometry of the part. These new methods, in particular a fast, efficient direct slicing method, enable printing slender member structures with over one hundred thousand struts. The slicing algorithm is nearly perfectly parallel so it could extend to handle structures with over one million struts, helping to facilitate the adoption of slender member structures for engineering-scale applications.

36 MATERIALS SCIENCE↗

Designing for Big Area Additive Manufacturing

Additive manufacturing (AM), more commonly referred to as 3D printing, is revolutionizing the manufacturing industry. With any new technology comes new rules and guidelines for the optimal use of said technology. Big Area Additive Manufacturing (BAAM), developed by Cincinnati Incorporated and Oak Ridge National Laboratory’s Manufacturing Demonstration Facility, requires a host of new design parameters compared to small-scale 3D printing to create large-scale parts. However, BAAM also creates new possibilities in material testing and various applications in the manufacturing industry. Most of the design constraints of small-scale polymer 3D printers still apply to BAAM. Beyond those constraints, new rules and limitations exist because BAAM’s large-scale system significantly changes the thermal properties associated with small-scale AM. Here, this work details both physical and software-related design considerations for additive manufacturing. After reading this guide, one will have a better understanding of slicing software’s capabilities and limitations, different physical characteristics of design and how to apply them appropriately for AM, and how to take the inherent nature of AM into consideration during the design process.

36 MATERIALS SCIENCE↗

Size-dependent stochastic tensile properties in additively manufactured 316L stainless steel

Recent work in metal additive manufacturing (AM) suggests that mechanical properties may vary with feature size; however, these studies do not provide a statistically robust description of this phenomenon, nor do they provide a clear causal mechanism. Because of the huge design freedom afforded by 3D printing, AM parts typically contain a range of feature sizes, with particular interest in smaller features, so the size effect must be well understood in order to make informed design decisions. This work investigates the effect of feature size on the stochastic mechanical performance of laser powder bed fusion tensile specimens. A high-throughput tensile testing method was used to characterize the effect of specimen size on strength, elastic modulus and elongation in a statistically meaningful way. The effective yield strength, ultimate tensile strength and modulus decreased strongly with decreasing specimen size: all three properties were reduced by nearly a factor of two as feature dimensions were scaled down from 6.25 mm to 0.4 mm. Hardness and microstructural observations indicate that this size dependence was not due to an intrinsic change in material properties, but instead the effects of surface roughness on the geometry of the specimens. Finite element analysis using explicit representations of surface topography shows the critical role surface features play in creating stress concentrations that trigger deformation and subsequent fracture. The experimental and finite element results provide the tools needed to make corrections in the design process to more accurately predict the performance of AM components.

316L stainless steel↗

The effects of SO 2 exposure on three-way catalysts for passive SCR operation

We report efficient lean-burn gasoline engines cannot employ traditional three-way catalysts (TWCs) to control NO X emissions due to excess oxygen. Passive selective catalytic reduction (pSCR) is a process designed to control NOx by generating NH 3 over the TWC during fuel-rich operation, storing it on a downstream SCR, and then converting NOx during fuel-lean operation. This work is focused on studying sulfur effects on this promising strategy. Two hydrothermally-aged commercial catalysts were studied for their effectiveness in the presence of SO 2 : a Pd-based TWC and a TWC with NO X storage. The sulfated samples were evaluated in a flow reactor under pSCR conditions and with targeted reactions. SO 2 inhibited the water gas shift and steam reforming reactions, decreasing (but not eliminating) NH 3 production; however, initial activity is recoverable after a simple thermal treatment at 650 °C. This work will prove valuable in understanding, mitigating, and even reversing the effects of SO 2 inhibition on real pSCR systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A comparative techno-economic analysis of renewable methanol synthesis from biomass and CO 2 : Opportunities and barriers to commercialization

Global demand for methanol as both a chemical precursor and a fuel additive is rising. At the same time, numerous renewable methanol production pathways are under development, which, if commercialized, could provide significant environmental benefits over traditional methanol synthesis pathways. However, it is difficult to compare technologies at different maturity levels, with differing feedstocks, and with significant differences in overall process design. Thus, there is a need to harmonize the analyses of renewable pathways using a consistent techno-economic approach to evaluate the potential for commercialization of various pathways. This analysis uses a novel cross-comparison method to assess near-term and long-term viability of both low- and high-maturity level technologies. Furthermore, the techno-economic assessment considers cost factors critical to market acceptance combined with carbon- and energy-efficiency assessments of three renewable pathways compared with a commercial baseline. We find that biomass gasification to methanol represents a near-term viable pathway with a high technology readiness level and commercially competitive market price. If cost-reducing technological improvements can be realized and scaled up in the CO 2 electrolysis pathways, the potential for higher carbon efficiencies may help drive market adoption of these more modular, direct conversion pathways in future markets as they present an opportunity to better support global decarbonization efforts through efficient waste carbon utilization.

09 BIOMASS FUELS↗

Permeate fluxes from desalination of brines and produced waters: A reactive transport modeling study

The increasing interest in the use of membrane systems to desalinate inland brackish water, agricultural drainage, and industrially produced wastewater demands improved means of predicting desalination system performance under variable feedwater compositions. The interaction among water flow, solute transport, and chemical composition in these systems impacts permeate flux evolution. Here, an established multicomponent reactive transport simulator that accounts for these coupled processes is applied to compute osmotic pressure and permeate fluxes in reverse osmosis (RO) systems. The model is first validated by predicting permeate fluxes for a set of benchtop crossflow experiments subject to a range of feed flow rates and compositions, under fouling and non-fouling conditions. Results compare favorably with measured data that show that solutions with similar total dissolved solids concentrations but different compositions result in different permeate fluxes. The model is then applied to predict permeate fluxes from the desalination of produced waters using a commercial spiral wound RO module. For NaCl-dominant brines, at total dissolved salt concentrations (TDS) below about 70 g/L, permeate fluxes are inversely proportional to water mole fraction as the latter is a reasonable approximation of water activity (i.e. ideal mixing). In the case of Ca–Cl-, Na–CO3- and Na–SO4-dominant brines below about 70 g/L TDS, this relationship does not hold as well and tends to overpredict osmotic pressure and thus underpredict permeate fluxes. However, the opposite becomes true at higher TDS values for typical produced waters. The scaling potential of these waters is also computed by allowing the precipitation of minerals above their saturation limit on the RO membrane. This work demonstrates how reactive transport models developed for the analysis of waters from geological systems can be extended to improve process design, optimization, and control in desalination systems from produced waters and beyond.

Molins, Sergi↗

Biochemical Production with Purified Cell-Free Systems

Bioprocesses offer a powerful set of opportunities for current chemical process innovation. Such conversions provide opportunities to employ process intensification strategies and the right characteristics to scale down and harness the power of modular process design, but strain engineering and the use of microbial systems for industrial biochemicals production remain unpredictable and expensive. Purified cell-free technologies, in which complex enzyme reaction cascades are used to catalyze bioconversions of interest, can be designed to mitigate these limitations. Such systems allow predictive kinetic modeling and full control of reaction conductions, enabling a dramatically increased design-built-test cycle iteration rate. When sufficiently robust engineered enzymes are used, opportunities to leverage harsh reaction conditions, long-term recycling strategies, and hybridization with chemical catalysis can be used to dramatically improve the value proposition of biochemicals production. As a result, further research is required to realize the potential of these approaches and to address the current platform-limiting challenges around cofactor cost and reuse.

09 BIOMASS FUELS↗

A new perspective on density and strength loss profiles at the surface of thermally oxidized nuclear graphite

Oxidation of graphite components could influence their designed life in a high-temperature nuclear reactor. The oxidized regions could potentially lower the allowed stress capacity. The American Society of Mechanical Engineers rules for the design and construction of graphite-moderated reactors recommend that subsurface regions that might become excessively damaged by oxidation during reactor operation be identified and excluded from geometry and stress calculations. Identification of oxidation-affected regions is possible, in principle, through complex modeling exercises of reactor behavior during hypothetical accident scenarios coupled with graphite oxidation models, but this procedure may not have the precision needed for informed decisions. Here, this paper proposes an alternate method, based on interpretation of a series of well-designed oxidation experiments, which could augment the designer's tools. The procedure is illustrated by data on oxidation by air of several graphite grades (NBG-18, PCEA, IG-110, R4-650) that are corroborated with independent literature information, when available. The Wichner model for graphite oxidation used for this analysis provides conservative results that could be quickly implemented in the design process.

36 MATERIALS SCIENCE↗

Adsorption-based direct air capture using hierarchical porous composites prepared via confined-space crystallization

Capturing CO₂ at trace concentration remains a critical challenge in sustainable carbon management via adsorption, as conventional adsorbents suffer from low CO₂ selectivity, poor moisture tolerance, and energy-intensive regeneration requirements. Here, we report a hierarchical Ba²⁺-exchanged silicoaluminophosphate (Ba²⁺-CSAPO-34) composite synthesized via confined-space crystallization within an activated carbon matrix. Comprehensive characterization revealed a confined nucleation mechanism and the successful incorporation of Ba²⁺ active sites within the SAPO-34 framework, achieved via a two-step liquid ion-exchange protocol. The core-shell architecture combines the selective CO₂ binding of Ba²⁺-functionalized SAPO-34 with the hydrophobic protection of the carbon shell. Fixed-bed adsorption tests demonstrated strong CO₂ binding (at 500-2500 ppm), no roll-up, and effective suppression of water affinity, while maintaining high selectivity even at 90% relative humidity. A phenomenological adsorption model, validated against dynamic breakthrough data, accurately predicted dynamic adsorption behavior under real-world operating conditions, enabling rational process design for direct air capture (DAC) and closed-loop life support systems. Furthermore, these results establish Ba²⁺-CSAPO-34 as a scalable, moisture-resistant adsorbent that addresses key limitations in trace CO₂ capture, advancing practical implementation of carbon removal technologies.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Algorithms and analyses for stochastic optimization for turbofan noise reduction using parallel reduced-order modeling

Simulation-based optimization of acoustic liner design in a turbofan engine nacelle for noise reduction purposes can dramatically reduce the cost and time needed for experimental designs. Because uncertainties are inevitable in the design process, a stochastic optimization algorithm is posed based on the conditional value-at-risk measure so that an ideal acoustic liner impedance is determined that is robust in the presence of uncertainties. A parallel reduced-order modeling framework is developed that dramatically improves the computational efficiency of the stochastic optimization solver for a realistic nacelle geometry. The reduced stochastic optimization solver takes less than 500 s to execute. Additionally, well-posedness and finite element error analyses of the state system and optimization problem are provided.

97 MATHEMATICS AND COMPUTING↗

Foreward

This special issue of Computers & Chemical Engineering contains extended versions of selected contributions from the 8th International Conference on the Foundations of Computer-Aided Process Design (FOCAPD-2014), held at the Suncadia Resort in Cle Elum, Washington, USA, July 13–17, 2014. These papers were recommended by the International Programming Committee and constitute a representative sample of the invited plenary lectures,future perspectives, and contributed papers.

99 GENERAL AND MISCELLANEOUS↗

Recent and future developments in pultrusion technology with consideration for curved geometries: A review

Herein this paper examined the current state and future developments in pultrusion with particular emphasis on its application in curved part manufacturing. The relationship between factors such as resin chemistry, fiber characteristics, and die geometry that influences the properties of pultruded product were highlighted. Moreover, the specific challenges associated with pultruding curved parts such as the complexities in achieving uniformity and structural integrity in such geometries were discussed. The review emphasized mold design, process improvement, adaptive control systems for precise resin impregnation and material selection to address these challenges. Additionally, the paper suggests the integration of real-time monitoring and data analytics as ways to enhance quality control during curved parts pultrusion. These advancements will help to overcome challenges specific to curved pultrusion and make the process more efficient. Other manufacturing techniques such as filament winding, thermoforming, pulforming were mentioned as alternatives to curved parts pultrusion. The review also explores pultruded variable curvature processes, highlighting some notable patents and article related to this subject matter. Production of pultruded variable curvature parts was seen as a key driver that can shape the future of pultrusion. Finally, the paper anticipates future trends, with sustainability, customization, integration of advanced materials, and development of techniques for pultrusion of composites parts.

42 ENGINEERING↗

Development of high-early-strength fiber-reinforced self-compacting concrete

High-early-strength fiber-reinforced self-compacting concrete (FRSCC) is a practical material for the precast concrete industry to double its production capacity. In this study, we developed high-early-strength FRSCC mixtures that achieved a compressive and flexural strength of at least 24 MPa and 3.5 MPa, respectively, at 6 h, using commercially available components, typical mixing procedures, and air curing. A mix design process was developed based on the literature and experimental results. The effect of six different fiber reinforcements on the fresh and mechanical properties of concrete was analyzed. The cost limit was set at 523 USD/m 3 to make the concrete mix cost-effective.

36 MATERIALS SCIENCE↗

Process intensification education contributes to sustainable development goals. Part 1

In 2015 all the United Nations (UN) member states adopted 17 sustainable development goals (UN-SDG) as part of the 2030 Agenda, which is a 15-year plan to meet ambitious targets to eradicate poverty, protect the environment, and improve the quality of life around the world. Although the global community has progressed, the pace of implementation must accelerate to reach the UN-SDG time-line. For this to happen, professionals, institutions, companies, governments and the general public must become cognizant of the challenges that our world faces and the potential technological solutions at hand, including those provided by chemical engineering. Process intensification (PI) is a recent engineering approach with demonstrated potential to significantly improve process efficiency and safety while reducing cost. It offers opportunities for attaining the UN-SDG goals in a cost-effective and timely manner. However, the pedagogical tools to educate undergraduate, graduate students, and professionals active in the field of PI lack clarity and focus. This paper sets out the state-of-the-art, main discussion points and guidelines for enhanced PI teaching, deliberated by experts in PI with either an academic or industrial background, as well as representatives from government and specialists in pedagogy gathered at the Lorentz Center (Leiden, The Netherlands) in June 2019 with the aim of uniting the efforts on education in PI and produce guidelines. In this Part 1, we discuss the societal and industrial needs for an educational strategy in the framework of PI. The terminology and background information on PI, as it relates to educational implementation in industry and academia, are provided as a preamble to Part 2, which presents practical examples that will help educating on Process Intensification.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermodynamic Modeling of Aqueous LiCl, LiBr, LiI, and LiNO 3 Solutions

Thermodynamic models are essential to facilitate the advancement of process design, optimization, and operation of electrolyte systems. In this work, a comprehensive thermodynamic framework based on the Electrolyte Nonrandom Two-Liquid model is developed to calculate phase equilibria behavior and salt solubility of aqueous LiCl, LiBr, LiI, and LiNO 3 solutions. The model describes the non-ideality of the electrolyte solutions by using two binary interaction parameters for each electrolyte-molecule pair in the system. Each binary interaction parameter is further expressed with up to three temperature coefficients which are regressed from experimental data. To take into account the hydration of lithium ion, two separate chemistries for the dissociation of lithium salts are investigated. In the first case, the lithium ion is considered as a bare ion, Li + , while in the second case hydration of the lithium ion from Li + to Li(H 2 O) + is considered. Here, the calculated thermodynamic properties compare adequately with the experimental data for both sets of chemistries for concentrations up to saturation and temperatures from 273.15 K up to 623.15 K. Moderate to significant improvements are observed with the incorporation of the hydration chemistry for aqueous LiCl, LiBr, and LiI solutions when compared to the non-hydrated lithium ion model results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗