Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Phase separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Viscometric and misting properties of polymer-modified fuel

Solutions of polyisobutylenes L160, L200, B200, and B230 in Jet-A were prepared at concentrations up to 3000 ppm. These polymers have molecular weights in the range 5 to 9 x 1,00,000 and have previously been shown to induce anti-misting properties in Jet-A. In connection with the pumpability of such solutions, especially at low temperatures, the shear viscosity, eta, of these solutions was measured at temperatures 25 C, 0 C, and -25 C. Concentration-dependence of eta was very similar for all four polymer solutes, the increase of eta(c) at 3000 ppm being roughly four-fold (relative to Jet-A) for the L-series and five-fold for the B-series. This behavior prevailed at all temperatures, and there was no evidence of phase separation or other chemical instability at -25 C at any concentration. In the more practical c-range for anti-misting applications, say within 1000 ppm, the increase of eta(c) was only twofold.

Grens, E. A., II↗
NASA NTRS1983

Statistical mechanics of light elements at high pressure. V Three-dimensional Thomas-Fermi-Dirac theory

A numerical technique for solving the Thomas-Fermi-Dirac (TED) equation in three dimensions, for an array of ions obeying periodic boundary conditions, is presented. The technique is then used to calculate deviations from ideal mixing for an alloy of hydrogen and helium at zero temperature and high presures. Results are compared with alternative models which apply perturbation theory to calculation of the electron distribution, based upon the assumption of weak response of the electron gas to the ions. The TFD theory, which permits strong electron response, always predicts smaller deviations from ideal mixing than would be predicted by perturbation theory. The results indicate that predicted phase separation curves for hydrogen-helium alloys under conditions prevailing in the metallic zones of Jupiter and Saturn are very model dependent.

Macfarlane, J. J.↗
NASA NTRS1984

He-3 cooling systems for space

The development of a space-compatible He(3) refrigerator would provide a significant improvement in several areas of research in the 0.3 to 1 K temperature range. There are several methods of achieving these temperatures on Earth: He(3) refrigeration, dilution refrigeration, and adiabatic demagnetization refrigeration. The progress of adapting He(3) refrigeration for use in space is described. Various cycles and possible embodiments of He(3) refrigerators are described. Also included is an analysis of the liquid confinement and liquid-vapor phase-separation system. A possible configuration is then analyzed. Finally, the results of ground-based experiments will be discussed.

Kittel, P.↗
NASA NTRS1983

Enstatite chondrites - Trace element clues to their origin

Three EH and three EL chondrites have been subjected to RNAA analysis for 20 trace elements, and interelement correlations were examined in order to assess the effects of nebular fractionation and metamorphism. The refractory siderophiles Ir, Os, and Re correlate with the normal siderophiles Ni, Pd, Au, Sb, and Ge, in ELs but not in EHs. The two element groups presumably condensed on separate phases at first, but concentrated in metal during metabolism. Volatiles are consistently more depleted in ELs than EHs. Strong correlations are found for In-Tl, Tl-Bi, and Zn-Cd-In, which are equally consistent with predicted condensation curves for the solar nebula and with volatilization curves for artificially heated Abee. The three factors accounting for 93 percent of variance reflect volatile, siderophile, and chalcophile behavior.

Hertogen, J.↗
NASA NTRS1984

Theoretical study of miscibility and glass-forming trends in mixtures of polystyrene spheres

A theoretical study of glass-forming trends and miscibility in mixtures of polystyrene spheres (polyballs) of different diameters, suspended in an aqueous solution, is presented. The polyballs are assumed to be charged and to interact via a Debye-Hueckel screened Coulomb potential. The Helmholtz free energy is calculated from a variational principle based on the Gibbs-Bogoliubov inequality, in which a mixture of hard spheres of different diameters is chosen as the reference system. It is found that when the charges of the two types of polyballs are sufficiently different, the variationally determined ratio of hard-sphere diameters differs substantially, leading to packing difficulties characteristic of glass formation. The experimentally observed range of glass formation corresponds to a ratio of hard-sphere diameters of 0.8 or less. Calculations of the free energy as a function of concentration indicate that the liquid polyball mixture is stable against the phase separation, even for widely different polyball charges.

Shih, W.-H.↗
NASA NTRS1983

Scientific results from the materials processing in space program

Scientific experiments conducted in a low-gravity environment make it possible to study effects, such as surface tension-driven flows, which are often masked by buoyancy-driven flows. A summary is provided of several early experiments which demonstrate that unwanted convective flows can be effectively suppressed in experiments conducted in orbiting spacecraft. Possible applications of low-G processing are discussed, taking into account Bridgman growth of solid solution alloy-type semiconductors, Bridgman growth of eutectic systems, and float-zone crystal growth. The control of macrosegregation and phase separation in castings is considered, giving attention also to containerless melting and solidification. A description of experiment facilities and opportunities is provided.

Naumann, R.↗
NASA NTRS1983

Glass research in space

Opportunities and problems associated with conducting containerless glass experiments in a microgravity environment are examined. Particular aspects of gel-derived glasses for space processing research are discussed, along with current space-related research activities in areas of amorphous phase separation, crystallization, and heterogeneous and homogeneous crystal nucleation.

Neilson, G. F.↗
NASA NTRS1983

Surface characteristics of metallic glass spheres of Au(55)Pb(22.5)Sb(22.5)

It is pointed out that the production of metallic glasses of high atomic number is currently of considerable importance for inertial confinement fusion (ICF) target applications. In connection with the present investigation, spherules of the alloy Au(55)Pb(22.5)Sb(22.5) were produced. Metallic glass was formed on solidification. With the aid of X-ray diffraction studies, it was established that the spheres were completely amorphous. A near-surface phase separation on spheres of the metallic glass could be observed. Energy dispersive spectroscopy (EDS) measurements showed that the average composition of the surface differed from that of the bulk.

Lee, M. C.↗
NASA NTRS1984

Constituent Property - Composite Property Relationships in Thermoset Matrices

A procedure to effectively screen and evaluate resins for aerospace structures and advanced composites is described. The following conclusions were advanced: (1) laminate damage tolerance correlates positively with neat resin G sub IC; (2) TGDDM/DDS resins can be toughened; (3) using butadiene-nitrile rubbers, neat resin G sub IC and ultimate strain increase with increasing nitrile content, with the number of chemically reactive groups per molecule, and with increasing molecular weight; (4) better balance of properties combined with high G sub IC may be achieved by using tough glassy thermoplastics instead of rubbers to modify TGDDM/DDS resins; (5) both toughening mechanisms require good phase separation with an effective interphase; (6) the kind and the amount of thermoplastic modifier remain to be selected; and (7) presently only about a fourfold increase in G sub IC was achieved, whereas a forty fold increase is sought; modification of the matrix backbone and of crosslinking is required.

Diamant, J.↗
NASA NTRS1984

Reaction of amorphous Ni-W and Ni-N-W films with substrate silicon

Wiley et al. (1982) have studied sputtered amorphous films of Nb-Ni, Mo-Ni, Si-W, and Si-Mo. Kung et al. (1984) have found that amorphous Ni-Mo films as diffusion barriers between multilayer metallizations on silicon demonstrate good electrical and thermal stability. In the present investigation, the Ni-W system was selected because it is similar to the Ni-Mo system. However, W has a higher silicide formation temperature than Mo. Attention is given to aspects of sample preparation, sample characterization, the interaction between amorphous Ni-W films and Si, the crystallization of amorphous Ni(36)W(64) films on SiO2, amorphous Ni-N-W films, silicide formation and phase separation, and the crystallization of amorphous Ni(36)W(64) and Ni(30)N(21)W(49) layers.

Zhu, M. F.↗
NASA NTRS1985

Separate-contact phase-locked semiconductor laser arrays

The novel optoelectronic devices discussed, phase-locked semiconductor laser arrays with separate contacts can perform a variety of near field and far field pattern tailoring functions and control mutual coherence among array elements, as well as lasing wavelength selectivity and tunability. Attention is presently given to experimental results from such arrays, which indicate that the threshold currents of the 4-micron wide lasers employed are typically 60 mA. The separate contacts to each one of them are provided by means of two-level metallization.

Katz, J.↗
NASA NTRS1985

Liquid Phase Miscibility Gap Materials

The manner in which the microstructural features of liquid-phase miscibility gap alloys develop was determined. This will allow control of the microstructures and the resultant properties of these alloys. The long-duration low gravity afforded by the shuttle will allow experiments supporting this research to be conducted with minimal interference from buoyancy effects and gravitationally driven convection currents. Ground base studies were conducted on Al-In, Cu-Pb, and Te-Tl alloys to determine the effect of cooling rate, composition, and interfacial energies on the phase separation and solidification processes that influence the development of microstructure in these alloys. Isothermal and directional cooling experiments and simulations are conducted. The ground based activities are used as a technological base from which flight experiments formulated and to which these flight experiments are compared.

Gelles, S. H.↗
NASA NTRS1986

Polyphase thrust tectonic in the Barberton greenstone belt

In the circa 3.5 by-old Barberton greenstone belt, the supracrustal rocks form a thick and strongly deformed thrust complex. Structural studies in the southern part of the belt have shown that 2 separate phases of over-thrusting (D sub 1 and D sub 2) successively dismembered the original stratigraphy. Thrust nappes were subsequently refolded during later deformations (D sub 3 and D sub 4). This report deals with the second thrusting event which, in the study region appears to be dominant, and (unlike the earlier thrusting), affects the entire supracrustal pile. The supracrustal rocks form a predominantly NE/SW oriented, SE dipping tectonic fan (the D sub 2 fan) in which tectonic slices of ophiolitic-like rocks are interleaved with younger sedimentary sequences of the Diepgezet and malalotcha groups. Structural and sedimentological data indicate that the D sub 2 tectonic fan was formed during a prolonged, multi-stage regional horizontal shortening event during which several types of internal deformation mechanisms were successively and/or simultaneously active. Movement appears to have been predominantly to the NW and to the N. During D sub 2, periods of quiescence and sedimentation followed periods of thrust propagation. Although the exact kinematics which led to the formation of this fan is not yet known, paleoenvironmental interpretations together with structural data suggest that D sub 2 was probably related to (an) Archean collision(s).

Paris, I. A.↗
NASA NTRS1985

Infrared telescope (IRT) system cryogenic performance

Thermal performance evaluation tests on the Small Helium Cooled Infrared Telescope (IRT), prior to flight on Spacelab 2 in 1985, are reported. The telescope is a joint project of the Smithsonian Astrophysical Observatory, the University of Arizona, and the NASA-Marshall Space Flight Center. Starting with 190 liters of liquid helium to be converted to superfluid, 140 liters should be available at launch; 100 liters would be available 48 hours into the mission when first observations begin and 30 liters should be left as a reserve at payload deactivation. New data and insight have been gained regarding the processes which govern the functioning of a porous plug phase separator for superfluid helium.

Urban, E. W.↗
NASA NTRS1985

Effect of R(3+) ions on the structure and properties of lanthanum borate glasses

The present investigation of glass formation in the (mole percent) systems 25La2O3 (x)R2O3 (75-x)B2O3, where R = Al, Ga, and (25-x)La2O3 (x)Ln2O3 75B2O3, where Ln = Gd, Er, Y, notes that up to 25 mol pct Al2O3 or Ga2O3 can be substituted for B2O3, while no more than about 5 mol pct Ln2O3, substituted for La2O3, caused macro-phase separation. The substitution of either R2O3 or Ln2O3 in the lanthanum borate system changes the separation distance between adjacent B3O6 chains. The effect of this structural change on the molar volume, transformation temperature, thermal expansion coefficient, and transformation-range viscosity is discussed.

Chakraborty, I. N.↗
NASA NTRS1985

Rationalization of some genetic anticodonic assignments

The hydrophobicity of most amino acids correlates well with that of their anticodon nucleotides, with Trp, Tyr, Ile, and Ser being the exceptions to this rule. Using previous data on hydrophobicity and binding constants, and new data on rates of esterification of polyadenylic acid with several N-acetylaminoacyl imidazolides, several of the anticodon assignments are rationalized. Chemical reasons are shown supporting the idea of the inclusion of the Ile in the catalog of biological amino acids late in the evolution, through a mutation of the existing tRNA and its aminoacyl-tRNA-synthetase. It was found that an addition of hexane increases the incorporation of hydrophobic Ac-Phe into poly-A, in support of the Fox (1965) and Oparin (1965) emphasis on the biogenetic importance of phase-separated systems.

Lacey, J. C., Jr.↗
NASA NTRS1987

An analysis of bipropellant neutralization for spacecraft refueling operations

Refueling of satellites on orbit with storable propellants will involve venting part or all of the pressurant gas from the propellant tanks. This gas will be saturated with propellant vapor, and it may also have significant amounts of entrained fine droplets of propellant. The two most commonly used bipropellants, monomethyl hydrazine (MMH) and nitrogen tetroxide (N2O4), are highly reactive and toxic. Various possible ways of neutralizing the vented propellants are examined. The amount of propellant vented in a typical refueling operation is shown to be in the range of 0.2 to 5% of the tank capacity. Four potential neutralization schemes are examined: chemical decomposition, chemical reaction, condensation and adsorption. Chemical decomposition to essentially inert materials is thermodynamically feasible for both MMH and N2O4. It would be the simplest and easiest neutralization method to implement. Chemical decomposition would require more complex control. Condensation would require a refrigeration system and a very efficent phase separator. Adsorption is likely to be much heavier. A preliminary assessment of the four neutralization shemes is presented, along with suggested research and development plans.

Kauffman, David↗
NASA NTRS1986

Semi-interpenetrating networks of LARC-TPI

In a previous research project at NASA-Langley, a novel semi-2-interpenetrating polymer network (semi-2-IPN) was prepared from the linear, thermoplastic polyimidesulfone, and the more brittle, crosslinked, acetylene-terminated imidesulfone. Synergistic qualities such as improved thermooxidative stability and better processability were achieved from this combination. The novelty of the system lay in the fact that the structures of the linear and crosslinking components were nearly identical. This similarity in structure eliminates any phase separation problems common to many-IPNs. In a similar way, a semi-2-IPN was prepared from linear, thermoplastic LARC-TPI and acetylene-terminated LARC-TPI (ATLARC-TPI). The preparation and characterization of this system will be discussed as well as adhesive and composite data.

Egli, Annemarie H.↗