Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Particle shape”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Resolved multifrequency radio observations of GG Tau

We present subarcsecond resolution observations of continuum emission associated with the GG Tau quadruple star system at wavelengths of 1.3, 2.8, 7.3, and 50 mm. These data confirm that the GG Tau A binary is encircled by a circumbinary ring at a radius of 235 AU with a FWHM width of ∼60 AU. We find no clear evidence for a radial gradient in the spectral shape of the ring, suggesting that the particle size distribution is spatially homogeneous on angular scales ≳0.''1. A central point source, likely associated with the primary component (GG Tau Aa), exhibits a composite spectrum from dust and free-free emission. Faint emission at 7.3 mm is observed toward the low-mass star GG Tau Ba, although its origin remains uncertain. Using these measurements of the resolved, multifrequency emission structure of the GG Tau A system, models of the far-infrared to radio spectrum are developed to place constraints on the grain size distribution and dust mass in the circumbinary ring. The non-negligible curvature present in the ring spectrum implies a maximum particle size of 1-10 mm, although we are unable to place strong constraints on the distribution shape. The corresponding dust mass is 30-300 M {sub ⊕}, at a temperature of 20-30 K. We discuss how this significant concentration of relatively large particles in a narrow ring at a large radius might be produced in a local region of higher gas pressures (i.e., a particle 'trap') located near the inner edge of the circumbinary disk.

79 ASTRONOMY AND ASTROPHYSICS↗

The dynamic shape factor of sodium chloride nanoparticles as regulated by drying rate

The influence of drying rate on the dynamic shape factor {chi} of NaCl particles was investigated. The drying rate at the efflorescence relative humidity (ERH) of 45% was controlled in a laminar flow tube and varied from 5.5 {+-} 0.9 to 101 {+-} 3 RH s{sup -1} at ERH, where RH represents one percent unit of relative humidity. Dry particles having mobility diameters of 23-84 nm were studied, corresponding to aqueous particles of 37-129 nm at the RH (57%) prior to drying. At each mobility diameter and drying rate, the critical supersaturation of cloud-condensation activation was also measured. The mobility diameter and the critical supersaturation were combined in an analysis to determine the value of {chi}. The measured values varied from 1.02 to 1.26. For fixed particle diameter the {chi} value decreased with increasing drying rate. For fixed drying rate, a maximum occurred in {chi} between 35- and 40-nm dry mobility diameter, with a lower {chi} for both smaller and larger particles. The results of this study, in conjunction with the introduced apparatus for obtaining quantified drying rates, can allow the continued development of a more detailed understanding of the morphology of submicron salt particles, with the potential for the follow-on development of quantitative modeling of evaporation and crystal growth at these dimensions.

54 ENVIRONMENTAL SCIENCES↗

Characterization of 3D printing filaments containing metal additives and their particulate emissions

Polylactic acid (PLA) filaments are widely used in fused filament fabrication (FFF) processes (3D printing). Filament additives such as metallic particles incorporated into PLA to modify functional and aesthetic features of print objects are becoming increasingly popular. However, the identities and concentrations of low percentage and trace metals in these filaments have not been well described in either the literature or product safety information included with the product. Here, we report the structures and concentrations of metals in selected Copperfill, Bronzefill and Steelfill filaments. We also report size-weighted number concentrations and size-weighted mass concentrations of particulate emissions as a function of print temperature for each filament. Particulate emissions were heterogenous in shape and size with airborne particles below 50 nm diameter dominating the size-weighted particle concentrations and larger particles (approximately 300 nm) dominating the mass weighted particle concentration. Results indicate that potential exposure to particles in the nano-size range increase when using print temperatures above 200o C. Because inhalation exposure to nanoparticles has been linked to adverse health outcomes, we suggest that using lower print temperatures for specific metal-fill filaments may reduce their operational hazard.

36 MATERIALS SCIENCE↗

Theory of two-dimensional self-assembly of Janus colloids: crystallization and orientational ordering

We study the rich crystalline phase behavior of amphiphilic spherical Janus colloids using a new formulation of self-consistent phonon theory that includes coupled translational and rotational entropic and enthalpic contributions to the free energy. In contrast to homogeneous spheres, broken rotational symmetry can result in more exotic crystals that possess distinct orientational patterns, and also plastic crystals. Ground states are identified based on the compatibility between the patch geometry of particles (e.g., patch coverage, number, shape) and lattice symmetry. We derive the explicit coupled self-consistent equations for translational and rotational localization parameters for effectively 2-dimensional dense monolayers of Janus crystals. The equations are numerically solved for a given crystal symmetry, thermodynamic state, and patch orientational order, and the thermodynamic stability of different phases is determined. For hexagonal packing, we predict with increasing temperature or decreasing attraction strength the possibility of a phase sequence of maximally bonded zigzag stripe, trimer, and rotationally disordered plastic crystal phases (or a phase sequence of trimer, dimer, and plastic crystal), which depends sensitively on particle chemical composition (Janus balance) and pressure. Here, the role of rotational entropy in stabilizing the intermediate trimer (or dimer) phase at intermediate temperatures and high pressures is discussed in detail. Evolution of the center-of-mass vibrational and rotational amplitudes with thermodynamic state and Janus balance is also determined.

36 MATERIALS SCIENCE↗

Influence of crystal structure on constitutive anisotropy of silica sand at particle-scale

In spite of recent advanced geotechnical research regarding the influence of particle-scale morphology and fabric on the constitutive behavior of silica sands, there is still no published literature that investigated the influence of crystal structure of sand particles on their constitutive behavior. The main constituent of silica sand particles is quartz mineral, which has a trigonal crystal system and hexagonal lattice. This paper investigates the influence of quartz crystal structure on the constitutive response of silica sand particles using 3D X-ray diffraction (3DXRD), synchrotron micro-computed tomography (SMT), and 3D finite element (FE) analysis. Here, unconfined uniaxial compression experiments on single particles of synthetic silica cubes exposed the notion of constitutive anisotropy caused by the crystal structure of quartz. Since the silica cubes have simple regular geometry (1 mm) 3 , they were loaded in different directions with respect to their crystal local planes. The crystal structure was also identified for a natural silica sand specimen composed of 2705 particles and loaded in confined uniaxial compression. Physical limitations of the experimental measurements made a strong case for the use of 3D FE analysis to study how the change in crystal local orientation of individual sand particles can fundamentally produce anisotropy in the constitutive response of natural sand specimens. The 3D FE analysis was validated to accurately model the crystal-based constitutive anisotropy in silica particles using the results of the silica cube experiments. The analysis was then executed on 3D FE meshes that closely matched the physical shape and fabric of the 2705 particles in the natural sand specimen. Both the experiments and 3D FE analysis showed that the crystal structure of quartz essentially causes a directional anisotropy in the constitutive behavior of silica particles.

58 GEOSCIENCES↗

Review: knots and other new topological effects in liquid crystals and colloids

Abstract Humankind has been obsessed with knots in religion, culture and daily life for millennia, while physicists like Gauss, Kelvin and Maxwell already involved them in models centuries ago. Nowadays, colloidal particles can be fabricated to have shapes of knots and links with arbitrary complexity. In liquid crystals, closed loops of singular vortex lines can be knotted by using colloidal particles and laser tweezers, as well as by confining nematic fluids into micrometer-sized droplets with complex topology. Knotted and linked colloidal particles induce knots and links of singular defects, which can be interlinked (or not) with colloidal particle knots, revealing the diversity of interactions between topologies of knotted fields and topologically nontrivial surfaces of colloidal objects. Even more diverse knotted structures emerge in nonsingular molecular alignment and magnetization fields in liquid crystals and colloidal ferromagnets. The topological solitons include hopfions, skyrmions, heliknotons, torons and other spatially localized continuous structures, which are classified based on homotopy theory, characterized by integer-valued topological invariants and often contain knotted or linked preimages, nonsingular regions of space corresponding to single points of the order parameter space. A zoo of topological solitons in liquid crystals, colloids and ferromagnets promises new breeds of information displays and a plethora of data storage, electro-optic and photonic applications. Their particle-like collective dynamics echoes coherent motions in active matter, ranging from crowds of people to schools of fish. This review discusses the state of the art in the field, as well as highlights recent developments and open questions in physics of knotted soft matter. We systematically overview knotted field configurations, the allowed transformations between them, their physical stability and how one can use one form of knotted fields to model, create and imprint other forms. The large variety of symmetries accessible to liquid crystals and colloids offer insights into stability, transformation and emergent dynamics of fully nonsingular and singular knotted fields of fundamental and applied importance. The common thread of this review is the ability to experimentally visualize these knots in real space. The review concludes with a discussion of how the studies of knots in liquid crystals and colloids can offer insights into topologically related structures in other branches of physics, with answers to many open questions, as well as how these experimentally observable knots hold a strong potential for providing new inspirations to the mathematical knot theory.

Physics↗

Coupled Experimental and High-Temperature Discrete-Element Method Modeling Studies of Aluminosilicate Particle Handling in Concentrated Solar Power Environments

Chemically inert, aluminosilicate based particles have been investigated as both a thermal transport and sensible energy storage medium for concentrated solar power facilities. These particles will experience a wide range of operating temperatures (300-1000 K) and handling conditions (dense to dilute falling particle curtains, dense granular flows, or dense structures), requiring specially-designed and optimized infrastructures. The relative influence of collisional and frictional interactions between particles varies based on temperature-dependent particulate properties and greatly impacts the bulk, granular flow behavior. These underlying physics are captured using discrete element method modeling tools. However, this modeling method is computationally expensive as each particle position and interaction is tracked during the simulation. These modeling methods are further complicated by introducing temperature-dependent particle properties, high-temperature radiative exchange, and directional irradiation sources experienced by granular flows in concentrated solar power environments. Coupled experimental and numerical studies of aluminosilicate particles in rotary kilns and dense particle curtains were performed for bulk temperatures up to 1073 K. The three particle types investigated included Carbobead HSP 30 /60, Carbobead CP 30/60, and Granusil 4030. Temperature, spatial, and velocity profile data were extracted from experimental runs using embedded K-type thermocouple probes and particle image velocimetry techniques. Experimental and numerical studies were compared using spatial temperature profiles, velocity fields, and shape profiles of the bulk, granular flows. Numerical models were developed using commercially available discrete element method modeling software, Aspherix®. Existing Aspherix® functionality was expanded by introducing coupled radiative exchange modeling tools. The laboratory-scale rotary kiln was developed to investigate the steady-state heat and mass transfer performance of aluminosilicate particles based on particle type, bulk handling temperature, and wall roughness. The rotational speed of the rotary kiln was varied to control the relative impact of collisional and frictional effects upon the granular flow behavior. Heat and mass transfer performance was categorized based on the Froude number and the observed flow regimes of slipping, rolling, cascading, and centrifuging. Coupled discrete element method modeling studies were used to evaluate the effects of temperature-dependent, particulate mechanical properties upon bulk flow behavior and upon the relative effects of radiative, advective, and/or conductive heat transfer. A high-temperature (< 1073 K) falling particle curtain was similarly fabricated to investigate the heat and mass transfer performance of aluminosilicate particles in particle handling situations dominated by inter-particle collisions. The impact of particle type, flow preheat temperatures (< 1073K), and bulk mass flow rates were investigated upon the particle curtain shape, temperature, and velocity profiles. Coupled discrete element method modeling studies were performed to evaluate the varying impact of temperature-dependent, particulate mechanical properties on the bulk flow behavior and the temperature profile of the particle curtain.

14 SOLAR ENERGY↗

Dependence of the localized surface plasmon resonance of noble metal quasispherical nanoparticles on their crystallinity-related morphologies

The absorption spectra of 5 nm noble metal nanoparticles (Ag, Au, and Cu) with typical morphologies of multiply twinned particles (MTPs) and single crystals are calculated by using the discrete dipole approximation method. Among the considered morphologies, it is found that icosahedral, cuboctahedral and truncated octahedral particles behave like quasispherical particles whereas the optical response of the decahedral particles significantly differs from the others. This result, which originates from the shape anisotropy of the decahedron, points out the capacity to discriminate decahedral MTPs from a population of particles with mixed crystallinities and related quasispherical shapes.

36 MATERIALS SCIENCE↗

Synthesis and Corrosion Study of Zirconia-Coated Carbonyl Iron Particles

This paper describes the surface modification of micrometer-sized magnetic carbonyl iron particles (CI) with zirconia from zirconium(IV) butoxide using a sol–gel method. Zirconia shells with various thicknesses and different grain sizes and shapes are coated on the surface of CI particles by changing the reaction conditions, such as the amounts of zirconia sol, nitric acid, and CI particles. A silica adhesive layer made from 3-aminopropyl trimethoxysilane (APTMS) can be introduced first onto the surface of CI particles in order to adjust both the size and the shape of zirconia crystals, and thus the roughness of the coating. The microanalyses on these coated particles are studied by field-emission scanning electron microscopy (FE-SEM) and X-ray-diffraction (XRD). Accelerated acid corrosion and air oxidation tests indicate that the coating process dramatically improved oxidation and acid corrosion resistances, which are critical issues in various applications of CI magnetic particles.

carbonyl iron↗

Commissioning of the cryogenics of the LHC long straight sections

The LHC is made of eight circular arcs interspaced with eight Long Straight Sections (LSS). Most powering interfaces to the LHC are located in these sections where the particle beams are focused and shaped for collision, cleaning and acceleration. The LSSs are constituted of several unique cryogenic devices and systems like electrical feed-boxes, standalone superconducting magnets, superconducting links, RF cavities and final focusing superconducting magnets. This paper presents the cryogenic commissioning and the main results obtained during the first operation of the LHC Long Straight Sections.

43 PARTICLE ACCELERATORS↗

Temperature dependence of magnetic property and photocatalytic activity of Fe{sub 3}O{sub 4}/hydroxyapatite nanoparticles

Fe{sub 3}O{sub 4}/hydroxyapatite (HAP) nanoparticles have been developed as a novel photocatalyst support, based on the embedment of magnetic Fe{sub 3}O{sub 4} particles into HAP shell via homogeneous precipitation method. The resultant nanoparticles were characterized by transmission electron microscope (TEM) and X-ray diffraction (XRD). These particles were almost spherical in shape, rather monodisperse and have a unique size of about 25 nm in diameter. The effect of calcination temperature on magnetic property and photocatalytic activity of Fe{sub 3}O{sub 4}/HAP nanoparticles was investigated in detail. The obtained results showed that the Fe{sub 3}O{sub 4}/HAP nanoparticles calcined at 400 {sup o}C possessed good magnetism and photocatalytic activity in comparison with that calcined at other temperatures.

36 MATERIALS SCIENCE↗

Ab-Initio Investigation of Finite Size Effects in Rutile Titania Nanoparticles with Semilocal and Nonlocal Density Functionals

In this work, we employ hybrid and generalized gradient approximation (GGA) level density functional theory (DFT) calculations to investigate the convergence of surface properties and electronic gap of rutile titania nanoparticles with particle size. The surface energies and electronic gaps are calculated for cuboidal particles with minimum dimension ranging from 3.7 Angstrom (24 atoms) to 10.3 Angstrom (384 atoms) using a highly-parallel real-space DFT code to enable hybrid level DFT calculations of larger nanoparticles than are typically practical. We deconvolute the geometric and electronic finite size effects in surface energy, and evaluate the influence of defects on electronic gap and density of states (DOS). The electronic finite size effects in surface energy vanish when the minimum length scale of the nanoparticles becomes greater than 10 Angstrom. We show that this length scale is consistent with a computationally efficient numerical analysis of the characteristic length scale of electronic interactions. The surface energy of nanoparticles having minimum dimension beyond this characteristic length can be approximated using slab calculations that account for the geometric defects. In contrast, the finite size effects on the electronic gap and DOS is highly dependent on the shape and size of these particles. Furthermore, the DOS for cuboidal particles and more realistic particles constructed using the Wulff algorithm reveal that defect states within the electronic gap play a key role in determining the eigen value distribution of nanoparticles and the electronic gap does not converge to the bulk limit for the particle sizes investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and magnetic characterization of magnetite obtained by monowavelength visible light irradiation

Highlights: Black-Right-Pointing-Pointer Magnetite was synthesized under monowavelength LED irradiation at room temperature. Black-Right-Pointing-Pointer Different wavelength irradiations led to distinctive characteristics of magnetite. Black-Right-Pointing-Pointer Particle sizes of magnetite were controlled by different irradiation wavelengths. Black-Right-Pointing-Pointer Wavelength affects the magnetic characteristics of magnetite. -- Abstract: Magnetite (Fe{sub 3}O{sub 4}) nanoparticles were controllably synthesized by aerial oxidation Fe{sup II}EDTA solution under different monowavelength light-emitting diode (LED) lamps irradiation at room temperature. The results of the X-ray diffraction (XRD) spectra show the formation of magnetite nanoparticle further confirmed by Fourier transform infrared spectroscope (FTIR) and the difference in crystallinity of as-prepared samples. Fe{sub 3}O{sub 4} particles are nearly spherical in shape based on transmission electron microscopy (TEM). Average crystallite sizes of magnetite can be controlled by different irradiation light wavelengths from XRD and TEM: 50.1, 41.2, and 20.3 nm for red, green, and blue light irradiation, respectively. The magnetic properties of Fe{sub 3}O{sub 4} samples were investigated. Saturation magnetization values of magnetic nanoparticles were 70.1 (sample M-625), 65.3 (sample M-525), and 58.2 (sample M-460) emu/g, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Numerical simulation of the devolatilization of a moving coal particle

The devolatilization of an isolated coal particle moving relative to the surrounding gas is numerically simulated using a competing reaction model of the pyrolysis and assuming that the released volatiles burn in an infinitely thin diffusion flame around the particle or not at all. The temperature of the particle is assumed to be uniform and the effects of the heat of pyrolysis, the intraparticle mass transfer resistance, and the variation of the particle radius are neglected. The effects of the size and velocity of the particle and of the temperature and oxygen mass fraction of the gas on the particle and flame temperature histories, the devolatilization time and the yield of light and heavy volatiles are investigated. The motion of the particle may have an important effect on the shape and position of the flame of volatiles, but it has only a mild effect on the devolatilization process for the particle sizes typical of pulverized coal combustion. This effect increases for large particles or in the absence of radiation. The relative motion enhances the heat transfer between the particle and the gas, causing the devolatilization time to decrease at high gas temperatures and to increase at low gas temperatures. The numerical results are compared with a blowing-corrected Nusselt number correlation often used in heat transfer models of the process. (author)

01 COAL, LIGNITE, AND PEAT↗

Influence of infrared stimulation on spectroscopy characteristics of co-planar grid CdZnTe detectors

It was previously found that illumination with monochromatic infrared (IR) light with wavelengths close to the absorption edge of the CdZnTe exert significant positive influence on the spectrometric characteristics of quasi-hemispherical CdZnTe detectors at room temperature. In this paper, preliminary results of IR stimulation on the spectrometric characteristics of coplanar-grid CdZnTe detectors as well as results of further studies of planar and quasi-hemispherical detectors are presented. Coplanar-grid detectors of 10 mm x 10 mm x 10 mm from Redlen Technologies and commercial available IR LEDs with different wavelengths of 800-1000 nm were used in the experiments. Influence of intensity and direction of IR illumination on the detector's characteristics was studied. Analysis of signals shapes from the preamplifiers outputs at registration of alpha particles showed that IR illumination leads to a change in the shapes of these signals. This may indicate changes in electric fields distributions. An improvement in energy resolution at gamma-energy of 662 keV was observed with quasi-hemispherical and co-planar detectors at the certain levels of IR illumination intensity. The most noticeable effect of IR stimulation was observed with quasi-hemispherical detectors. It is due with optimization of charge collection conditions in the quasi-hemispherical detectors under IT stimulation. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Synthesis of nano-sized ZnO particles by co-precipitation method with variation of heating time

Zinc oxide powders have been synthesized by a co-precipitation method at low temperature (85 °C), using zinc acetate dihydrate, ammonia, hydrochloric acid solutions as the reactants. A number of process parameters such as reaction temperature, solution basicity or pH and heating time are the main factors affecting the morphology and physical properties of the ZnO nanostructures. In this work the effect of heating time on the morphology and particles size were studied. The as-synthesized ZnO powders were characterized using transmission electron microscopy (TEM) and X-ray diffraction (XRD) techniques. The samples were also analyzed using Fourier transform infrared (FTIR). Rietveld refinement of XRD data confirms that ZnO crystallizes in the hexagonal wurtzite structure with high degree of purity and the (101) plane predominant. The XRD results show that the average crystallite sizes were about 66, 27 and 12 nm for 3, 4 and 5 h of heating times, respectively. The XRD analysis indicated that a fraction of nano-sized ZnO powders were in the form of aggregates, which was also verified by TEM image. The TEM photograph demonstrated that the nano-sized ZnO particles were a pseudo-spherical shape.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Studies on hydrogen plasma and dust charging in low-pressure filament discharge

The effect of working gas pressure and dust charging on electron energy probability function has been studied for hydrogen plasma in a multi-dipole dusty plasma device. A cylindrical Langmuir probe is used to evaluate the plasma parameters and electron energy probability function (EEPF) for different working pressures. For lower energy range (below 10 eV), the EEPF follows a bi-Maxwellian shape at very low pressure (6 × 10{sup −5} mbar), while elevating the working pressure up to ∼2 × 10{sup −3} mbar, the shape of the EEPF transforms into a single Maxwellian. Some dip structures are observed at high energy range (ε > 10 eV) in the EEPF of hydrogen plasma at all the working conditions. In presence of dust particles, it is observed that the shape of the EEPF changes due to the redistribution of the high and low-energy electron populations. Finally, the effect of working pressure on charge accumulation on dust particles is studied with the help of a Faraday cup and electrometer. From the observations, a strong influence of working pressure on plasma parameters, EEPF and dust charging is observed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Monodispersed biocompatible Ag2S nanoparticles: Facile extracellular bio-fabrication using the gamma-proteobacterium, S. oneidensis

Interest in engineered metal and semiconductor nanocrystallites continues to grow due to their unique size and or shape dependent optoelectronic, physicochemical and biological properties. Therefore identifying novel non-hazardous nanoparticle synthesis routes that address hydrophilicity, size and shape control and production costs have become a priority. In the present illustration we report for the first time the efficient generation of extracellular Ag2S nanoparticles by the metal reducing bacterium, Shewanella oneidensis. The particles are nearly monodispersed with homogeneous shape distributions and are produced under ambient temperatures and pressures at high yield, 85 % theoretical maximum. UV-vis and Fourier transform infrared spectroscopy, dynamic light scattering, X-ray diffraction, transmission electron microscopy and X-ray photoelectron spectroscopy measurements confirmed the formation, optical properties, purity, and crystallinity of the as-synthesized particles. Further characterization revealed that the particles consist of spheres in the size range of 1-22 nm, with an average size of 9 3 nm and are capped by a detachable protein/peptide surface coat. Toxicity assessments of these silver sulfide nanoparticles on Gram-negative Escherichia coli and Shewanella oneidensis and Gram-positive Bacillus subtilis bacterial systems as well as eukaryotic; mouse lung epithelial (C 10) and macrophage (RAW-264.7) cells showed that the particles were non-inhibitory or non-cytotoxic to both these systems. Our results provide a facile, eco-friendly and economical route for the fabrication of technologically important semiconducting Ag2S nanoparticles which are dispersible and biocompatible; thus providing excellent potential for their uses in optical imaging and electronic devices, and solar cell applications.

14 SOLAR ENERGY↗