Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Particle Size Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Phase stability in thermally-aged CASS CF8 under heavy ion irradiation

The stability of the microstructure of a cast austenitic stainless steel (CASS), before and after heavy ion irradiation, was investigated by atom probe tomography (APT). A CF8 ferrite–austenite duplex alloy was thermally aged at 400 °C for 10,000 h. After this treatment, APT revealed nanometer-sized G-phase precipitates and Fe-rich α and Cr-enriched α' phase separated regions in the ferrite. The thermally-aged CF8 specimen was irradiated with 1 MeV Kr ions to a fluence of 1.88 × 10 19 ions/m 2 at 400 °C. After irradiation, APT analysis revealed a strong spatial/dose dependence of the G-phase precipitates and the α–α' spinodal decomposition in the ferrite. For the G-phase precipitates, the number density increased and the mean size decreased with increasing dose, and the particle size distribution changed considerably under irradiation. The inverse coarsening process can be described by recoil resolution. The amplitude of the α–α' spinodal decomposition in the ferrite was apparently reduced after heavy ion irradiation.

Li, Meimei↗

The sources and diurnal variations of submicron aerosols in a coastal–rural environment near Houston, US

Aerosol properties were characterized at a rural site southwest of Houston from May to September 2022 during the intensive operation periods (IOPs) of the Tracking Aerosol Convection Interactions ExpeRiment (TRACER). Backward trajectory analysis reveals three major air mass types: marine air mass from the Gulf, urban air mass influenced by urban emissions, and regional air mass. Marine aerosols typically show a bimodal size distribution and have the lowest particle number and mass concentrations of PM 1 (particulate matter with an aerodynamic diameter of less than 1 µm), while aerosols from air masses strongly influenced by urban emissions exhibit the highest concentrations. Organic aerosol (OA) accounts for more than 50 % of PM 1 for urban and regional air masses, whereas sulfate is comparable to OA in marine air masses. Positive matrix factorization (PMF) analysis of aerosol mass spectra identifies 6 OA factors: hydrocarbon-like OA (HOA), OA from the oxidation of monoterpenes (MT-SOA), OA from the reactive uptake of isoprene epoxydiols by acidic sulfate particles (isoprene-SOA), oxygenated OA arising from shipping emissions (shipping-OOA), and two oxygenated OA factors with high O : C ratios (OOA1 and OOA2). OOA2 has the highest O : C ratio and exhibits elevated mass concentration in the afternoon. Similar diurnal variation of highly oxidized OA factors was commonly observed in the Houston area during previous studies and attributed to the SOA formation by photochemistry and mixing from aloft. Here, using air mass backward trajectories and a 1-D box model, we show the diurnal trend of OOA2 mass concentration is instead driven by changes in air mass arriving at the rural site. The air mass changes are likely caused by the shift between land breezes and sea/bay breezes. Within the same air mass type (e.g., either urban or marine air mass), OOA2 mass concentration is largely independent of wind direction and shows essentially no diurnal variation, suggesting OOA2 is related to aged OA with minimal influence by local emissions. This study helps identify the major sources of OA in the Houston region and highlights the impacts of both atmospheric chemistry and meteorology on aerosol properties in the coastal–rural environment.

54 ENVIRONMENTAL SCIENCES↗

Operando X-ray imaging reveals size-dependent evolution of cobalt oxide thermochemical material during thermal redox cycles

Multivalent metal oxides are promising thermochemical materials (TCMs) for energy storage and conversion owing to their high energy density, air compatibility, and high-temperature stability. Co 3 O 4 serves as a model system for examining particle-size- and structure-dependent redox behavior. While particle size and porosity are known to affect performance, their interplay and the kinetics of pore formation during cycling remain unclear. Here we show the chemical and 3D morphological evolution of Co 3 O 4 micro- and nanoparticles during redox cycles at 800–900 °C using thermal analysis, in-situ synchrotron transmission X-ray microscopy (TXM), and scanning electron microscopy. Thermal analysis shows that nanoparticles re-oxidize more rapidly than microparticles at 800 °C. In-situ nanotomography and chemical imaging reveals that nanoparticles undergo redox conversion without forming internal pores, whereas microparticles develop isolated porosity during reduction. These pores persist through re-oxidation, correlating to a lower conversion rate in subsequent cycles. Our results demonstrate distinct degradation kinetics in Co 3 O 4 micro- and nanoparticles, underscoring the critical role of particle size and porosity in redox performance and informing strategies to enhance the long-term efficiency of metal oxide TCMs.

25 ENERGY STORAGE↗

Measurements of size and composition of particles in polar stratospheric clouds from infrared solar absorption spectra

Results are presented on polar stratospheric cloud (PSC) observations, based on IR measurements of solar extinction, made by the airborne JPL Mark IV interferometer during the Airborne Antarctic Ozone Expedition in 1987, together with the instrumentation and the theoretical aspects of data analysis. Thirty-three PSC cases were analyzed and categorized into two types, I and II, which were found to occur at different altitudes during September. Type I clouds, seen at altitudes above 15 km, contained particles with radii of about 0.5 micarons and nitric acid concentrations greater than 40 percent, while type II clouds, found usually below 15 km, contained particles with radii of 6 microns and larger, composed of water ice. In addition, particles of larger than the 15-micron-size detection limit were encounterd.

Kinne, S.↗

Measurement of Transport Properties of Woody Biomass Feedstock Particles Before and After Pyrolysis by Numerical Analysis of X-Ray Tomographic Reconstructions

Lignocellulosic biomass has a complex, species-specific microstructure that governs heat and mass transport during conversion processes. A quantitative understanding of the evolution of pore size and structure is critical to optimize conversion processes for biofuel and bio-based chemical production. Further, improving our understanding of the microstructure of biochar coproduct will accelerate development of its myriad applications. This work quantitatively compares the microstructural features and the anisotropic permeabilities of two woody feedstocks, red oak and Douglas fir, using X-ray computed tomography (XCT) before and after the feedstocks are subjected to pyrolysis. Quantitative analysis of the three-dimensional (3D) reconstructions allows for direct calculations of void fractions, pore size distributions and tortuosity factors. Next, 3D images are imported into an immersed boundary based finite volume solver to simulate gas flow through the porous structure and to directly calculate the principal permeabilities along longitudinal, radial, and tangential directions. The permeabilities of native biomass are seen to differ by three to four orders of magnitude in the different principal directions, but we find that this anisotropy is substantially reduced in the biochar formed during pyrolysis. The quantitative transport properties reported here enhance the ability of pyrolysis simulations to account for feedstock-specific effects and thereby provide a useful touchstone for the biorefining community.

09 BIOMASS FUELS↗

Effect of MWCNT on prepared cathode material (Li{sub 2}Mn{sub (x)}Fe{sub (1-x)}SiO{sub 4}) for energy storage applications

The electrode material Li{sub 2}MnFeSiO{sub 4} was successfully synthesized by standard sol–gel method and further modified with multiwalled carbon nano tube (MWCNT) to achieve better electrochemical properties. Our strategy helps us to improve the performance and storage capacity as compared with the bared material. This novel composite structure constructs an efficient cation (Li{sup +}) and electron channel which significantly enhance the Li{sup +} ion diffusion coefficient and reduced charge transfer resistance. Hence leads to high conductivity and specific capacity. Characterization technique like Field emission scanning electron microscopy (FESEM) has been used to confirm its morphology, structure and particle size which comes out to be of the order of ∼20 to 30 nm. Lesser particle size reveals better electrochemical properties. Electrical conductivity (∼10{sup −5} Scm{sup −1}) of MWCNT doped oxide cathode materials was recorded using ac impedance spectroscopy technique which reflects tenfold increment when compared with pure oxide cathode materials. Cyclic voltametery analysis has been done to calculate specific capacity and potential window of materials with and without CNTs. The results obtained from different techniques are well correlated and suitable for energy storage applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Preparation and analysis of particulate metal deposits

Small particles and clusters of palladium were grown by deposition from the vapor phase under ultrahigh vacuum conditions. Amorphous and crystalline support films of Al2O3 and ultrathin amorphous carbon films were used as substrate materials. The growth of the metal deposit was monitored in situ by scanning transmission diffraction of energy-filtered 100 kV electrons and high resolution transmission electron microscopy (TEM) analysis was performed in a separate instrument. It was established by in situ TEM, however, that the transfer of specimens in this case did not unduly affect the size and distribution of deposit particles. It was found that the cleanness, stoichiometry, crystallinity and structural perfection of the support surface play an essential role in determining the crystalline perfection and structure of the particles. The smallest palladium clusters reproducibly prepared contained not more than six atoms but size determinations below 1 nm average particle diameter are very problematic with conventional TEM. Palladium particles grown on carbon supports feature an impurity-stabilized mosaic structure.

Poppa, H.↗

A unified analysis of nano-to-microscale particle dispersion in tubular blood flow

Transport of solid particles in blood flow exhibits qualitative differences in the transport mechanism when the particle varies from nanoscale to microscale size comparable to the red blood cell (RBC). The result of microscale particle margination has been investigated by several groups. Moreover, the transport of nanoscale particles (NPs) in blood has received considerable attention in the past. Our report attempts to bridge the gap by quantitatively showing how the transport mechanism varies with particle size from nano-to-microscale. Using a three-dimensional (3D) multiscale method, the dispersion of particles in microscale tubular flows is investigated for various hematocrits, vessel diameters, and particle sizes. NPs exhibit a nonuniform, smoothly dispersed distribution across the tube radius due to severe Brownian motion. The near-wall concentration of NPs can be moderately enhanced by increasing hematocrit and confinement. Furthermore, there exists a critical particle size (~1 μm) that leads to excessive retention of particles in the cell-free region near the wall, i.e., margination. Above this threshold, the margination propensity increases with the particle size. The dominance of RBC-enhanced shear-induced diffusivity (RESID) over Brownian diffusivity (BD) results in 10 times higher radial diffusion rates in the RBC-laden region compared to that in the cell-free layer, correlated with the high margination propensity of microscale particles. This work captures the particle size-dependent transition from Brownian-motion dominant dispersion to margination using a unified 3D multiscale computational approach and highlights the linkage between the radial distribution of RESID and the margination of particles in confined blood flows.

60 APPLIED LIFE SCIENCES↗

Tethered balloon measurements reveal enhanced aerosol occurrence aloft interacting with Arctic low-level clouds

Low-level clouds in the Arctic affect the surface energy budget and vertical transport of heat and moisture. The limited availability of cloud-droplet-forming aerosol particles strongly impacts cloud properties and lifetime. Vertical particle distributions are required to study aerosol–cloud interaction over sea ice comprehensively. This article presents vertically resolved measurements of aerosol particle number concentrations and sizes using tethered balloons. The data were collected during the Multidisciplinary drifting Observatory for the Study of Arctic Climate expedition in the summer of 2020. Thirty-four profiles of aerosol particle number concentration were observed in 2 particle size ranges: 12–150 nm (N 12−150 ) and above 150 nm (N >150 ). Concurrent balloon-borne meteorological measurements provided context for the continuous profiles through the cloudy atmospheric boundary layer. Radiosoundings, cloud remote sensing data, and 5-day back trajectories supplemented the analysis. The majority of aerosol profiles showed more particles above the lowest temperature inversion, on average, double the number concentration compared to below. Increased N 12−150 up to 3,000 cm −3 were observed in the free troposphere above low-level clouds related to secondary particle formation. Long-range transport of pollution increased N >150 to 310 cm −3 in a warm, moist air mass. Droplet activation inside clouds caused reductions of N >150 by up to 100%, while the decrease in N 12−150 was less than 50%. When low-level clouds were thermodynamically coupled with the surface, profiles showed 5 times higher values of N 12−150 in the free troposphere than below the cloud-capping temperature inversion. Enhanced N 12−150 and N >150 interacting with clouds were advected above the lowest inversion from beyond the sea ice edge when clouds were decoupled from the surface. Vertically discontinuous aerosol profiles below decoupled clouds suggest that particles emitted at the surface are not transported to clouds in these conditions. It is concluded that the cloud-surface coupling state and free tropospheric particle abundance are crucial when assessing the aerosol budget for Arctic low-level clouds over sea ice.

54 ENVIRONMENTAL SCIENCES↗

Imaging and Analysis of Insoluble Electrorefiner Material

Throughout pyroprocessing efforts at the Hot Fuel Examination Facility (HFEF), insoluble material has accumulated in the Electrorefiner (ER) vessel. The objective of this effort was to analyze the accumulated material to determine its origin. Material was removed from the ER salt bath and distilled to remove excess salt prior to performing analysis. Three samples were sent for chemical and isotopic analysis and underwent an ethyl acetate-bromine dissolution to segregate the oxide fraction from the metal fraction. Actinide concentrations were determined using a quadrupole–inductively coupled plasma–mass spectrometer (Q-ICP-MS). Three additional samples were sent for morphologic and elemental analysis by scanning electron microscopy (SEM) with Energy Dispersive X-ray (EDX) analysis at the Irradiated Materials Characterization Laboratory (IMCL). Analyses suggest that the material is primarily composed of UO2. with a small fraction of metal. This study draws no single conclusion as to the origin of the insoluble material in the ER. The particle sizes and morphologies observed in SEM micrographs indicate that the larger particles observed may be a result of introducing material to the ER that has not been completely reduced in Oxide Reduction (OR) operations, which precede electrorefining. Smaller particles may be due to reactions with oxygen and moisture present in HFEF. This research suggests that microscopic analysis of fuel particles before and after OR operations (including after distillation) as well as the uranium product collected on the cathode in the ER would increase understanding about particle morphology within the pyrochemical process.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The Chemical Behavior and Degradation Mitigation Effect of Cerium Oxide Nanoparticles in Perfluorosulfonic Acid Polymer Electrolyte Membranes

Perfluorosulfonic acid membranes, the polymer of choice for polymer electrolyte hydrogen fuel cells, are susceptible to degradation due to attacks on polymer chains from radicals. Mitigation of this attack by cerium-based radical scavengers is an approach that has shown promise. In this work, two formulations of single-crystal cerium oxide nanoparticles, with an order of magnitude difference in particle size, are incorporated into said membranes and subjected to proton conductivity measurements and ex-situ durability tests. We found that ceria is reduced to Ce(III) ions in the acidic environment of a heated, humidified membrane which negatively impacts proton conductivity. In liquid and gas Fenton testing, fluoride emission is reduced by an order of magnitude, drastically increasing membrane longevity. Side-product analysis demonstrated that in the liquid Fenton test, the main point of attack are weak polymer end groups, while in the gas Fenton test, there is additional side-chain attack. Both mechanisms are mitigated by the addition of the ceria nanoparticles, whereby the extent of the durability improvement is found to be independent of particle size.

Pearman, Benjamin P↗

Martian B Storm Genesis and Evolution: Initial Analysis of Thermal Datasets.

Introduction: Dust lifting on Mars likely occurs primarily as a result of the exchange of momentum between the atmosphere and the surface via saltation. During saltation, sand-sized particles are mobilized but do not enter into suspension. When these larger particles fall back to the surface, kinetic energy is transferred to smaller dust particles which are then lofted into suspension in the atmosphere. Depending on the altitude to which dust is lofted, it can have a significant effect on atmospheric temperatures. As a strong absorber and emitter in the infrared, dust can influence atmospheric heating and modify the global circulation and weather on Mars [1,2]. Although dust is present in Mars’ atmosphere throughout the year, the atmosphere is generally dustier during the second half of the year when Mars is near perihelion. Observations reveal that episodic global-scale dust storms and fairly regular regional-scale dust storms are superimposed on a well-defined and highly repeatable seasonal cycle of dust opacity and associated mid-level atmospheric temperature responses. Kass et al. (2016) used 50 Pa temperature observations from MRO/MCS to identify three highly repeatable time periods during which regional dust storms occur, and designated them the “A”, “B” and “C” storms. While “A” and “C” storms have been studied a fair amount to-date, “B” storms have not yet been investigated in detail. This study explores the generation and evolution of the annually recurring regional dust storm known as the “B” storm, which was identified and categorized by Kass et al. (2016) based on 25 km (50 Pa) temperature observations. The B storm is a southern-hemisphere (SH) phenomenon that originates at the cap edge just after perihelion and which reaches peak intensity during the SH summer solstice, Ls 270. It may originate from the cap edge storms that spawn near the edge of the seasonal CO2 cap during retreat, but the mechanisms for B storm genesis have yet to be determined definitively [1]. Methods: We will use observational data sets and a global climate model (GCM) to investigate “B” regional storms. The data analysis component will include the analysis of imagery from MGS/MOC and MRO/MARCI, and spectroscopic data sets of dust and temperatures from MGS/TES and MRO/MCS with the goal of fully characterizing the behavior of these storms. Both MGS and TES provide data well-suited for temperature analysis at 25 km. MCS measures atmospheric temperature, dust extinction, and water ice extinction at 5 km intervals from the surface to about 80 km. TES measured atmospheric temperatures, column dust and water ice opacities, and column water vapor abundances. Measurements made by TES extended from the surface to about 40 km [1]. At the 50 Pa (25 km) level, local dust events usually confined to shallower depths are effectively filtered out of the analysis leaving the regional dust events identifiable by their temperature signatures [1]. Our preliminary analysis makes use of the fact that the brightness temperature at 15 microns (T15 temperature) is a close approximation to observed temperature at 25 km. We first reproduce the zonal mean 50 Pa level temperature plots for MY 29-32 to establish a baseline for our procedures moving forward [1]. Expanding on Kass et al. (2016), we include recent MCS data from MY 33 and 34 as well. Preliminary Analysis: The daytime (3PM) T15 temperatures in Figure 1 indicate: in MY 29, a strong A storm at Ls 240, a B storm at high southern latitudes just after Ls 270, and a C storm at Ls 320; in MY 30, a B storm at Ls 270; in MY 31 & MY 32, a B storm just before Ls 270; in MY 33, a B storm at Ls 270; and in MY 34, a strong A storm in the northern hemisphere at Ls 210, and a B storm around Ls 270 although there is a data gap. For the B storms, each is indicative of lofted dust and resultant warming. The daytime temperature structure illustrates that the B storm occurs annually around Ls 270 and is confined to high southern latitudes. It reaches its peak intensity around SH summer solstice, Ls 270, consistently for all six MY assessed. Since direct solar heating is absent overnight, the nighttime T15 temperatures (Figure 2) are often useful for differentiating the heat signature of direct solar heating from the dynamical response to that heating. However, in the southern polar latitudes at perihelion the sun does not set and direct solar heating remains present throughout the night. Importantly for our study, dust lofted in the B storm experiences this direct heating day and night for the entirety of its lifetime. The B storm expands as far north as -60 latitude and decays in latitudinal extent more gradually than it grows. This feature is less obvious in the nighttime (3AM) T15 temperatures (Figure 2). The temperature signal is stronger at night for MY 30-33. The warm pool is larger in area relative to the background at night in these four cases. This more uniform warming masks the “tail” feature somewhat, such that it is barely noticeable during these years. Unfortunately, gaps in MCS data in MY 29 and 34 prevent confirmation of the tail feature during those years, however, the B storm temperature signature follows a very different pattern than that described for MY 30-33. MY 29 and 34 appear to show smaller centers of warming at night and larger centers of warming during the day. This is in opposition to that previously described for MY 30-33. Conclusions and Future Work: We will continue investigating the heat signatures of B storms by looking at the total column heating as recorded by TES. We will also look at lower altitudes for patterns that may describe the relationship between B storms and the cap edge storms that develop while the seasonal cap is retreating. In the future, we will use GCM simulations to determine the atmospheric and thermo-dynamic conditions associated with these storms.

Courtney Marylou Batterson↗

A gas chromatograph experiment for a Titan entry probe

Development of a gas chromatographic technique for analysis of aerosols and volatile organics from a Titan probe is now in progress. Preliminary investigations of aerosol collectors have shown that an electrostatic device should be the most efficient for the particle sizes expected in Titan's atmosphere. Such a device particularly lends itself to development of a simple pyrolyzer which can be used to break down any collected organic conglomerate structures into volatile fragments. Those fragments can subsequently be analyzed by GC providing information about the original chemical structure of the aerosols. Studies show that as little as 1 to 5 micrograms of model aerosol can be successfully analyzed. High altitude atmospheric gas sampling will also be important on Titan due to the great depth of the atmosphere. Studies show that a GC analysis of model Titan atmospheres at pressures approximating this altitude can be made with a sensitivity of a few ten's of parts-per-billion for the trace gases of interest.

Carle, G. C.↗

IR Spectroscopy for the Analysis of Scattering Polymeric Materials{sup *}

An effective spectroscopic method for estimating the degree of filling (porosity) of polymeric materials, the average size and the size distribution of the scattering particles of the filler within the polymer matrix, their anisotropy and the degree of orientation is proposed. The obtained spectral data are in good agreement with the results of optical and electron microscopy methods.

36 MATERIALS SCIENCE↗

Using Dust from Asteroids as Regolith Microsamples

Meteorite science is rich with compositional indicators by which we classify parent bodies, but few sample groups are definitively linked with asteroid spectra. More robust links need to be forged between meteorites and their parent bodies to understand the composition, diversity and distribution. A major link can be sample analysis of the parent body material and comparison with meteorite data. Hayabusa, the first sample return mission of the Japanese Aerospace Exploration Agency (JAXA), was developed to rendezvous with and collect samples from asteroid Itokawa and return them to Earth. Thousands of sub-100 micron particles were recovered, apparently introduced during the spacecraft impact into the surface of the asteroid, linking the asteroid Itokawa to LL chondrites [1]. Upcoming missions Hayabusa 2 and OSIRIS-REx will collect more significant sample masses from asteroids. In all these cases, the samples are or will be a collection of regolith particles. Sample return to earth is not the only method for regolith particle analysis. Dust is present around all airless bodies, generated by micrometeorite impact into their airless surfaces, which in turn lofts regolith particles into a "cloud" around the body. The composition, flux, and size-frequency distribution of dust particles can provide significant insight into the geological evolution of airless bodies [2]. For example, the Cassini Cosmic Dust Analyzer (CDA) detected salts in Enceladus' icy plume material, providing evidence for a subsurface ocean in contact with a silicate seafloor [3]. Similar instruments have flown on the Rosetta, LADEE, and Stardust missions. Such an instrument may be of great use in obtaining the elemental, isotopic and mineralogical composition measurement of dust particles originating from asteroids without returning the samples to terrestrial laboratories. We investigated the ability of a limited sample analysis capability using a dust instrument to forge links between asteroid regolith particles and known meteorite groups. We further set limits on the number of individual particles statistically needed to robustly reproduce a bulk composition.

microsamples↗

Texture enhancement during grain growth of magnesium alloy AZ31B

In this paper, the microstructure and texture evolution during annealing of rolled Mg alloy AZ31B, at temperatures ranging from 260 to 450°C, is characterized, and a grain growth exponent of n=5, indicating inhibition of grain growth, is observed. Broadening of the normalized grain size distributions, which indicates abnormal grain growth, was observed at all temperatures investigated. It is shown, using a Zener-type analysis for pinning of grain boundaries by particles, that impurity-based particles are responsible for grain growth inhibition and abnormal grain growth. The strong basal texture which develops during rolling of the Mg alloy, resulting in an initial peak intensity in the (0002) pole figure of nine multiples of a random distribution (MRD), increases to ~15 MRD during annealing at 400 and 450°C. Furthermore, a specific texture component {0001}(1120) is observed in the orientation distribution, which increases from 10 to 23 MRD at 400°C. It is hypothesized that the anisotropic grain boundary properties (i.e. low angle boundaries have low energy and mobility) are responsible for the texture strengthening. Additionally, electron backscattered diffraction reveals the recrystallized microstructure to contain a significant number of boundaries with ~30° misorientation about the <0001> direction, and this boundary type persists throughout most annealing treatments explored.

36 MATERIALS SCIENCE↗

Novel comparison of microscopy and diffraction techniques on the structure of iron oxide nanoparticle monolayers transferred by Langmuir-Schaefer method

Iron oxide nanoparticles undergo self-assembly into well-ordered monolayer films of macroscopic size at the air-water interface. This self-assembly process is the result of the van der Waals forces between the constituent particles. For roughly spherical particles, this monolayer is a 2D hexagonal close packed lattice. With Grazing Incidence X-Ray Diffraction (GID), one can obtain global statistical information about the film’s spacing and correlation length. Herein, we demonstrate that comparable structural information can be obtained by a novel Fourier transform analysis method applied to Scanning Electron Microscopy (SEM) images taken of the film after it has been transferred to a silicon substrate. This consists of using numerical methods to isolate the lattice structure of the monolayer in the SEM image to which a 2D discrete Fourier Transform is applied and the result integrated. This results in Bragg peak information akin to that obtained from GID, whose structure shows the same hexagonal close packed lattice with similar spacing and of greater peak contrast. Furthermore, this analysis technique may prove to be a suitable alternative or compliment to GID for many applications.

36 MATERIALS SCIENCE↗

The microstructure and mechanical properties of Al-containing 9Cr ODS ferritic alloy

In this study, a 9Cr oxide-dispersion strengthened (ODS) alloy with additional corrosion resistant element Al was fabricated by mechanical alloying (MA) and hot pressing (HP) to explore the impact of Al on the microstructure and mechanical property of a 9Cr ODS alloy. It is found that the Al completely dissolved into the FeeCr matrix after milling for 30 h. The minor phases in the Al-containing 9Cr ODS ferritic alloy were investigated by a high-energy X-ray, and were identified to be orthorhombic-YAlO3 (YAP), bcc-Y3Al5O12 (YAG), monoclinic-Al2Y4O9 (YAM), and hexagonal-YAlO3 (YAH). These phases were further confirmed by selected area diffraction pattern (SADP), energy dispersive spectroscopy (EDS), and high resolution transmission electron microscopy (HRTEM). In addition, their volume fractions were also calculated from the integrated intensities. According to the analysis of the particles and their formation sequences, the larger particles (greater than 100 nm) are identified as mainly YAG and Al2O3 particles, while the particles with small size (less than 30 nm) are likely primarily YAM, YAH, and YAP particles. The yielding strength (YS) and ultimate tensile strength (UTS) at RT are 563 MPa and 744 MPa, respectively, while the YS and UTS at 700 C are 245 MPa and 276 MPa, respectively. Although the addition Al in ODS alloys decreases the strength at RT, the values at high temperature are similar to those obtained for 9Cr ODS alloys strengthened by fine YeTieO particles.

Microstructure↗