Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRISMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Fabricating wedge-shaped beam splitters

Fast economical fabrication produces wedge-shaped beam splitter with 0.3 micrometer edge, compared to conventional methods that have yielded 2 micrometer edges. Typical beam splitter made by new process is prism-shaped with right-triangle cross-section.

Fleetwood, C. M., Jr.↗

Shuttle demonstration of large space structure fabrication and assembly

This paper describes a program aimed at the early on-orbit demonstration of a large-space-structure fabrication and assembly capability. Requirements for the demonstration concept have been formulated. The concept selected to meet these requirements is a Large Space Structure Platform consisting of a triangular prism of 31.5 m length. Sensors can be mounted on this platform to perform earth-observation measurements from space. Structural elements of the platform are fabricated using an automated beam builder in the Shuttle Orbiter payload bay. Special fixtures are designed to assemble the structure with the aid of the remote manipulator system and two astroworkers in an EVA mode. Results of the platform preliminary design are presented in terms of a design layout with related structural, thermal, mass-properties, and control-dynamics data. The assembly scenario is described. Estimates of the total construction time and Orbiter support requirements are also presented.

Fleisig, R.↗

High efficiency low cost solar cell power

A concept for generating high-efficiency, low-cost, solar-cell power is outlined with reference to solar cell parameters, optical concentrators, and thermal control procedures. A design for a 12.5-kw power module for space operation is discussed noting the optical system, spectrum splitter, light conversion system, cell cooling, power conditioner, and tracking mechanism. It is found that for an unconcentrated array, efficiency approaches 60% when ten or more bandgaps are used. For a 12-band system, a computer program distributed bandgaps for maximum efficiency and equal cell currents. Rigid materials and thin films have been proposed for optical components and prisms, gratings, and dichroic mirrors have been recommended for spectrum splitting. Various radiator concepts are noted including that of Weatherston and Smith (1960) and Hedgepeth and Knapp (1978). The concept may be suitable for the Solar Power Satellite.

Bekey, I.↗

Kitt Peak speckle camera

The speckle camera in regular use at Kitt Peak National Observatory since 1974 is described in detail. The design of the atmospheric dispersion compensation prisms, the use of film as a recording medium, the accuracy of double star measurements, and the next generation speckle camera are discussed. Photographs of double star speckle patterns with separations from 1.4 sec of arc to 4.7 sec of arc are shown to illustrate the quality of image formation with this camera, the effects of seeing on the patterns, and to illustrate the isoplanatic patch of the atmosphere.

Breckinridge, J. B.↗

Post Landsat-D advanced concept evaluation /PLACE/

The aim of the Post Landsat-D Advanced Concept Evaluation (PLACE) program was to identify the key technology requirements of earth resources satellite systems for the 1985-2000 period. The program involved four efforts: (1) examination of future needs in the earth resources area, (2) creation of a space systems technology model capable of satisfying these needs, (3) identification of key technology requirements posed by this model, and (4) development of a methodology (PRISM) to assist in the priority structuring of the resulting technologies.

Alexander, L. D.↗

Solar spectral irradiance at ground level

Available quantitative data on solar total and spectral irradiance is examined in the context of utilization of solar irradiance for terrestrial applications of solar energy. A brief review is given on the extraterrestrial solar total and spectral irradiance values. Computed values of solar spectral irradiance at ground level for different air mass values and various levels of atmospheric pollution or turbidity are also presented. Wavelengths are given for computation of solar absorptance, transmittance and reflectance by the 100-selected-ordinate method and by the 50-selected-ordinate method from air mass two solar spectral irradiance for the four degrees of atmospheric pollution. Total solar spectral irradiance measured with a prism monochromator is examined to evaluate the direct solar spectral irradiance for a surface normal to the sun's rays and to compare the computed spectrum with the experimentally observed one.

Mecherikunnel, A. T.↗

Mineralogy, textures and mode of formation of a hibonite-bearing Allende inclusion

The origin of a Type A, hibonite-rich, coarse-grained inclusion is investigated with the electron microprobe and petrographic and scanning electron microscopes. The primary phases are hibonite, rhonite, Ti-Al-pyroxene, spinel, perovskite and melilite. Evidence for the crystallization of the bulk of the primary phases, hibonite and melilite, from a melt is lacking, suggesting that they may have condensed directly from a solar nebular gas instead. Primary phases were intensely altered during a later condensation event which deposited grossular, anorthite, nepheline and wollastonite in veins and cavities. Four or five condensate rims were deposited as successive layers on the outside of the inclusion. From inside to outside, they consist of perovskite + spinel, nepheline + anorthite, Ti-Al-pyroxene + diopside, hedenbergite + or - wollastonite + or - andradite and, finally, prisms of diopside and hedenbergite with wollastonite and andradite. Reverse zoning in melilite; alteration phases and rim phases, which are not stable condensates from a gas of solar composition; and details of the sequence of rim condensates all suggest that the entire condensation history of this inclusion was interrupted by changes in pressure and/or temperature and/or gas phase composition.

Allen, J. M.↗

ESO 103-G35 - A new Seyfert galaxy and possible X-ray source

By means of an objective prism plate, two emission-line galaxies have been identified within the 0.7-sq deg HEAO-A2 error box for the X-ray source H1834-653. Optical spectrophotometric observations are reported for both objects as well as the galaxy NGC 6684, which also lies near the position of H1834-653. These data show that one of the emission-line galaxies, ESO 103-G35, is a Seyfert galaxy with a high-excitation forbidden-line spectrum and weak broad emission wings at H-alpha. Further measurements of this galaxy reveal an infrared excess at wavelengths longer than 2.2 microns. The H-alpha luminosity of ESO 103-G35 is consistent with the X-ray luminosity estimated from the HEAO-A2 data, thus strengthening the likelihood of association of this galaxy with the X-ray emission.

Phillips, M. M.↗

The Spacelab Wide Angle Telescope (SWAT)

A fast wide angle telescope that will be capable of imaging to the darker sky limit and in the ultraviolet wavelength region available above the atmosphere is described. The telescope (SWAT) has a resolution comparable to that of the large ground-based Schmidt telescope and a field of at least five degrees. A number of astrophysically important investigations can only be accomplished with such a telescope, e.g., detection of hidden, hot objects like hot white dwarfs and subwarfs in stellar binary systems, and energetic regions in globular clusters and galaxy nuclei. It permits unique studies of the UV-morphology of extended objects and allows discovery of very faint extensions, halos, jets, and filaments in galaxies. It can contribute to the investigation of dust in the Milky Way and in other galaxies and, with an objective prism, spectra of very faint objects can be obtained. The SWAT will localize objects for further study with the narrow-field Space Telescope.

West, R. M.↗

Study of rolling element dynamic interactions with separator and raceway paths. Roller skewing measurements in roller bearings

Measurements of roller skewing in a 118 mm bore roller bearing operating at shaft speeds to 12000 rpm are reported. High speed motion pictures of a modified roller were taken through a derotation prism to record skewing as the roller moved through loaded and unloaded regions of the bearing. Subsequent frame by frame measurement of the photographic film provided information on roller skewing. Radial and tangential skew amplitudes of .4 to .5 degrees were observed with .5 degree misalignment.

Nypan, L. J.↗

Multispectral scanner optical system

An optical system for use in a multispectral scanner of the type used in video imaging devices is disclosed. Electromagnetic radiation reflected by a rotating scan mirror is focused by a concave primary telescope mirror and collimated by a second concave mirror. The collimated beam is split by a dichroic filter which transmits radiant energy in the infrared spectrum and reflects visible and near infrared energy. The long wavelength beam is filtered and focused on an infrared detector positioned in a cryogenic environment. The short wavelength beam is dispersed by a pair of prisms, then projected on an array of detectors also mounted in a cryogenic environment and oriented at an angle relative to the optical path of the dispersed short wavelength beam.

Stokes, R. C.↗

Single-mode laser studies: Design and performance of a fixed-wave length source and coupling of lasers to thin-film optical waveguides

A module developed for the generation of a stable single wavelength to be used for a fiber optic multiplexing scheme is described. The laser is driven with RZ pulses, and the temperature is stabilized thermoelectrically. The unit is capable of maintaining a fixed wavelength within about 6 A as the pulse duty cycle is changed between 0 and 100 percent. This is considered the most severe case, and much tighter tolerances are obtainable for constant input power coding schemes. Using a constricted double heterostructure laser, a wavelength shift of 0.083 A mA is obtained due to laser self-heating by a dc driving current. The thermoelectric unit is capable of maintaining a constant laser heat-sink temperature within 0.02 C. In addition, miniature lenses and couplers are described which allow efficient coupling of single wavelength modes of junction lasers to thin film optical waveguides. The design of the miniature cylinder lenses and the prism coupling techniques allow 2 mW of single wavelength mode junction laser light to b coupled into thin film waveguides using compact assemblies. Selective grating couplers are also studied.

Ladany, I.↗

C IV resonance line profiles in O stars

Graphs of normalized fluxes derived from objective-prism spectra (from the S-019 experiment on Skylab), and C IV profiles are presented. The C IV resonance profile, when studied with respect to bolometric magnitude and effective temperature, reveals mass loss conditions without requiring precise mass loss rates. There is a clear trend in the C IV feature toward more fully developed P Cygni profiles at higher luminosities, and a significant velocity shift in the C IV absorption down to bolometric magnitude approximately equal to -7.7.

Parsons, S. B.↗

Faint-object spectrograph for Space Telescope

The paper presents the Faint Object Spectrograph (FOS) for the Space Telescope to provide a digitized spectra of faint astronomical objects over the 115 to 700 nm wavelength range at resolving powers of 1000 and 100. A variety of concave gratings and prisms is employed to form nearly stigmatic spectra on one of the two Digicon photon counting detectors which are optimized for two different but overlapping ranges. The scientific goals associated with quasars, active galaxies, and objects within our solar system are discussed, and the FOS optical design features, including detectors, electronics, signal processing, power supplies, and data handling are examined. The FOS structural system, mechanism, and controls are described, along with the predicted performance capabilities in the spectral and spectropolarimetry modes. Finally, system performance parameters, including spatial resolution, time resolution, noise, and efficiency are discussed.

Harms, r. J.↗

Space telescope astrometry

A description of instruments used for astrometric observations are examined with special emphasis on the Fine Guidance Systems of the space telescope. The telescope consists of a 2.4 meter diameter primary and a secondary figured to the Ritchey-Chretien design that yields a f/24 focal plane. The function of the FGS is to keep the total guidance jitter within the ST requirement of + or - 0.0007 rms, and to maximize the probability of finding suitable guide stars with the available 210 arcmin. Attention is given to the focal plane arrangement and to the ray paths and output images from the Koester's prisms. Some projected scientific uses of the space telescope are given as well as beneficial areas of close cooperation between the space telescope and the ESA.

Van Altena, W.↗

Twenty southern peculiar emission-line stars

Observational data for 20 southern stars having emission-line spectra that suggest a significant degree of mass ejection are given in order to present an atlas of their spectra and to give a quantitative description of their appearance during the 1961-62 epoch. Most of the stars are P Cygni stars; others include nova-like, peculiar Be, and symbiotic stars, as well as stellar planetary nebulae and emission-line binaries, all of whose spectra were obtained with the Newtonian two-prism Zeiss Spectrograph and the 74-inch reflector at Mount Stromlo Observatory. It is noted that among the P Cygni stars, there is a strong correlation between the a-e expansion velocity and the strength of Balmer emission, while in both the P Cygni and the Bep stars, there is positive dependence of Fe II and negative dependence of (Fe II) emission strengths on Balmer emission strength.

Carlson, E. D.↗

A study of the Rima Sirsalis lunar magnetic anomaly

The source of the lunar magnetic anomaly associated with the Rima Sirsalis linear rille has been modelled using the vector field intensities due to arbitrary uniform magnetization in a rectangular prism. It is shown that in order to match the Apollo 16 subsatellite data, the lunar surface near the rille must have a vertical magnetization of 6,000-9,000 G if the anomaly is due to flux leakage from a gap in the crust with the dimensions of the rille. An alternative explanation is that Rima Sirsalis and its surroundings are the site of a vertical magnetization contrast of 100,000-10,000 G which is at least as wide as the rille and extends to a depth of tens of kilometers in the crust. A wider magnetic source reduces the required magnetization (or depth) proportionately, since to first order the field at high altitude is proportional to the magnetic dipole moment per unit length.

Srnka, L. J.↗

A search for the reported Ti II 3080 multiplet emission in late-type stars

Gurzadyan (1975), using a low-resolution objective-prism spectrograph, has reported the presence of both the multiplet Ti II 3080 and the doublet Mg II 2800 simultaneously either in emission or in absorption in late-type stars. Using the high-resolution spectrometers onboard Copernicus and BUSS, it is found that stars which display Mg II 2800 strongly in emission do not have a corresponding emission feature at 3080.

Oegerle, W. R.↗