Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHOSPHIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Epitaxial growth and picosecond carrier dynamics of GaInAs/GaInNAs superlattices

We study GaInAs/GaInNAs superlattice structures grown on InP substrate as potential candidates for photoconductive terahertz devices or saturable absorbers working at 1.55 {mu}m wavelength. The N-rich GaInNAs layers are flat, with no three-dimensional islanding, and act as trapping layers where carriers can recombine rapidly. The carrier lifetime in GaInAs/GaInNAs superlattice was measured for various growth parameters using time-resolved differential transmission experiments at 1.55 {mu}m wavelength. The carrier lifetime is found to depend strongly on N content and can be reduced down to 3.8 ps for samples with 14% of N. The mechanisms involved in the capture process of photocarriers are discussed.

36 MATERIALS SCIENCE↗

3 W continuous-wave room temperature single-facet emission from quantum cascade lasers based on nonresonant extraction design approach

A strain-balanced, InP-based quantum cascade laser structure, designed for light emission at 4.6 {mu}m using a new nonresonant extraction design approach, was grown by molecular beam epitaxy. Removal of the restrictive two-phonon resonant condition, currently used in most structure designs, allows simultaneous optimization of several design parameters influencing laser performance. Following the growth, the structure was processed in buried heterostructure. Maximum single-ended continuous-wave optical power of 3 W was obtained at 293 K for devices with stripe dimensions of 5 mmx11.6 {mu}m. Corresponding maximum wallplug efficiency and threshold current density were measured to be 12.7% and 0.86 kA/cm{sup 2}.

36 MATERIALS SCIENCE↗

Ultrathin film, high specific power InP solar cells on flexible plastic substrates

We demonstrate ultrathin-film, single-crystal InP Schottky-type solar cells mounted on flexible plastic substrates. The lightly p-doped InP cell is grown epitaxially on an InP substrate via gas source molecular beam epitaxy. The InP substrate is removed via selective chemical wet-etching after the epitaxial layers are cold-welded to a 25 {mu}m thick Kapton sheet, followed by the deposition of an indium tin oxide top contact that forms the Schottky barrier with InP. The power conversion efficiency under 1 sun is 10.2{+-}1.0%, and its specific power is 2.0{+-}0.2 kW/kg. The ultrathin-film solar cells can tolerate both tensile and compressive stress by bending over a <1 cm radius without damage.

36 MATERIALS SCIENCE↗

Measurement of the refractive index dispersion of As{sub 2}Se{sub 3} bulk glass and thin films prior to and after laser irradiation and annealing using prism coupling in the near- and mid-infrared spectral range

The prism coupling technique has been utilized to measure the refractive index in the near- and mid-IR spectral region of chalcogenide glasses in bulk and thin film form. A commercial system (Metricon model 2010) has been modified with additional laser sources, detectors, and a new GaP prism to allow the measurement of refractive index dispersion over the 1.5-10.6 {mu}m range. The instrumental error was found to be {+-}0.001 refractive index units across the entire wavelength region examined. Measurements on thermally evaporated AMTIR2 thin films confirmed that (i) the film deposition process provides thin films with reduced index compared to that of the bulk glass used as a target, (ii) annealing of the films increases the refractive index of the film to the level of the bulk glass used as a target to create it, and (iii) it is possible to locally increase the refractive index of the chalcogenide glass using laser exposure at 632.8 nm.

36 MATERIALS SCIENCE↗

Optical and electrical characterization of InGaBiAs for use as a mid-infrared optoelectronic material

In{sub 0.53}Ga{sub 0.47}Bi{sub x}As{sub 1-x} films were grown on InP:Fe substrates by molecular beam epitaxy, with Bi concentrations up to x = 3.60%. Bi content in the epilayers was determined by Rutherford backscattering spectroscopy, and channeling measurements show Bi incorporating substitutionally. Unlike previous work, electrical and optical data are obtained for all samples. A redshift in peak wavelength of about 56 meV/%Bi was observed using spectrophotometry. The valence band anti-crossing model is applied, showing In{sub y}Ga{sub 1-y}Bi{sub x}As{sub 1-x} lattice-matched to InP is possible by varying the composition, with a theoretical cutoff wavelength of about 6 {mu}m.

36 MATERIALS SCIENCE↗

Low interfacial trap density and sub-nm equivalent oxide thickness in In{sub 0.53}Ga{sub 0.47}As (001) metal-oxide-semiconductor devices using molecular beam deposited HfO{sub 2}/Al{sub 2}O{sub 3} as gate dielectrics

We investigated the passivation of In{sub 0.53}Ga{sub 0.47}As (001) surface by molecular beam epitaxy techniques. After growth of strained In{sub 0.53}Ga{sub 0.47}As on InP (001) substrate, HfO{sub 2}/Al{sub 2}O{sub 3} high-{kappa} oxide stacks have been deposited in-situ after surface reconstruction engineering. Excellent capacitance-voltage characteristics have been demonstrated along with low gate leakage currents. The interfacial density of states (D{sub it}) of the Al{sub 2}O{sub 3}/In{sub 0.53}Ga{sub 0.47}As interface have been revealed by conductance measurement, indicating a downward D{sub it} profile from the energy close to the valence band (medium 10{sup 12} cm{sup -2}eV{sup -1}) towards that close to the conduction band (10{sup 11} cm{sup -2}eV{sup -1}). The low D{sub it}'s are in good agreement with the high Fermi-level movement efficiency of greater than 80%. Moreover, excellent scalability of the HfO{sub 2} has been demonstrated as evidenced by the good dependence of capacitance oxide thickness on the HfO{sub 2} thickness (dielectric constant of HfO{sub 2}{approx}20) and the remained low D{sub it}'s due to the thin Al{sub 2}O{sub 3} passivation layer. The sample with HfO{sub 2} (3.4 nm)/Al{sub 2}O{sub 3} (1.2 nm) as the gate dielectrics has exhibited an equivalent oxide thickness of {approx}0.93 nm.

36 MATERIALS SCIENCE↗

Picosecond carrier lifetimes in dilute GaInNAs grown on InP substrate

We study the carrier relaxation dynamics in Ga{sub 1-y}In{sub y} N{sub 0.03}As{sub 0.97} layers grown on InP substrate by molecular beam epitaxy. This dilute nitride semiconductor is a potential candidate for ultrafast components such as photoconductive terahertz devices driven at 1.55 {mu}m wavelength. Carrier lifetimes are measured by pump-probe experiments at 1550 nm wavelength and the shortest carrier lifetime is 2.6 ps under photoexcitation with {approx}4.2 {mu}J/cm{sup 2}. We observe two contributions in the differential transmittance decay. These contributions are discussed in terms of photocarrier recombination processes.

36 MATERIALS SCIENCE↗

Structure of the InAlAs/InP interface by atomically resolved energy dispersive spectroscopy

The structure of epitaxially grown InAlAs/InP interfaces was studied using atomically resolved x-ray energy dispersive spectroscopy in scanning transmission electron microscopy. As and P sublattices show sharp termination on the interface. The In sublattice is continuous across the interface. The study has shown the depletion of the Al concentration at the interface; at the last atomic columns of the InAlAs, In occupancy is close to 100%, while Al occupancy is almost zero. A monolayer of InAs at the interface is consistent with substitution of As for P at the surface preceding growth.

36 MATERIALS SCIENCE↗

Clarification of enhanced ferromagnetism in Be-codoped InMnP fabricated using Mn/InP:Be bilayers grown by molecular beam epitaxy

The p-type InMnP:Be epilayers were prepared by the sequential growth of Mn/InP:Be bilayers using molecular-beam-epitaxy and the subsequent in-situ annealing at 200-300 deg. C. In triple-axis x-ray diffraction patterns, the samples revealed a shoulder peak indicative of intrinsic InMnP. The ferromagnetic transition in InMnP:Be was observed to occur at the elevated temperature of {approx}140 K, and the ferromagnetic spin-domains clearly appeared in magnetic force microscopy images. The improved ferromagnetic properties are attributed to the increased p-d hybridation due to high p-type conductivity of InMnP:Be (p {approx} 10{sup 20 }cm{sup -3}). The results suggest that enhanced ferromagnetism can be effectively obtained from Be-codoped InMnP.

36 MATERIALS SCIENCE↗

Effects of hydrogenation on non-radiative defects in GaNP and GaNAs alloys: An optically detected magnetic resonance study

Photoluminescence and optically detected magnetic resonance techniques are utilized to study defect properties of GaNP and GaNAs alloys subjected to post-growth hydrogenation by low-energy sub-threshold ion beam irradiation. It is found that in GaNP H incorporation leads to activation of new defects, which has a Ga interstitial (Ga{sub i}) atom at its core and may also involve a H atom as a partner. The observed activation critically depends on the presence of N in the alloy, as it does not occur in GaP with a low level of N doping. In sharp contrast, in GaNAs hydrogen is found to efficiently passivate Ga{sub i}-related defects present in the as-grown material. A possible mechanism responsible for the observed difference in the H behavior in GaNP and GaNAs is discussed.

36 MATERIALS SCIENCE↗

Growth and photoluminescence of self-catalyzed GaP/GaNP core/shell nanowires on Si(111) by gas source molecular beam epitaxy

We report a study on self-catalyzed GaP/GaNP core/shell nanowires (NWs) grown on Si(111) by gas-source molecular beam epitaxy. Scanning electron microscopy images show that vertical and uniform GaP NWs and GaP/GaNP core/shell NWs are grown on Si(111). The density ranges from {approx}1 x 10{sup 7} to {approx}5 x 10{sup 8} cm{sup -2} across the substrate. Typical diameters are {approx}110 nm for GaP NWs and {approx}220 nm for GaP/GaNP NWs. Room temperature photoluminescence (PL) signal from the GaP/GaNP core/shell NWs confirms that N is incorporated in the shell and the average N content is {approx}0.9%. The PL low-energy tail is significantly reduced, compared to bulk GaNP.

36 MATERIALS SCIENCE↗

Effects of molecular beam epitaxy growth conditions on composition and optical properties of In{sub x}Ga{sub 1-x}Bi{sub y}As{sub 1-y}

We describe the growth conditions of In{sub x}Ga{sub 1-x}Bi{sub y}As{sub 1-y} (lattice-mismatched and matched) on InP substrates by molecular beam epitaxy and the resulting properties. Due to their anomalously narrow bandgaps and the presence of bismuth, these materials are promising for optoelectronics and thermoelectrics. Low growth temperature and moderate As/Bi beam equivalent pressure ratios are beneficial for Bi incorporation, in good qualitative agreement with GaBi{sub y}As{sub 1-y} on GaAs. Up to 6.75% bismuth is incorporated. High resolution x-ray diffraction and reciprocal space mapping show that In{sub x}Ga{sub 1-x}Bi{sub y}As{sub 1-y} samples exhibit good crystalline quality and zero relaxation. The band gap is reduced in agreement with theoretical predictions. Lattice-matched samples have been produced with lattice mismatch {<=}0.21%.

36 MATERIALS SCIENCE↗

Structural, electrical and optical properties of GaP codoped ZnO thin films

The GaP codoped ZnO (GPZO) thin films of different concentrations (0, 1, 2 and 4 mol%) have been grown by RF magnetron sputtering to realize p-ZnO. The grown films on sapphire substrates have been characterized by X-ray diffraction (XRD), Hall measurement, photoluminescence (PL), and Energy dispersive spectroscopy (EDS). XRD studies reveal that all the films are preferentially oriented along (002) plane. Hall measurement shows that 2% GPZO film shows low resistivity (2.17 {Omega} cm) and high hole concentration (1.8 x 10{sup 18} cm{sup -3} due to optimum amount of P incorporation. EDS spectra confirms the presence of Ga and P in 2 mol% GPZO film.

36 MATERIALS SCIENCE↗

Thermoelectric properties of epitaxial TbAs:InGaAs nanocomposites

InGaAs lattice-matched to InP was grown by molecular beam epitaxy with randomly distributed TbAs nanoparticles for thermoelectric power generation applications. TbAs:InGaAs is expected to have a large thermoelectric figure of merit, ZT, particularly at high temperatures, owing to energy band alignment between the nanoparticles and their surrounding matrix. Here, the room temperature thermoelectric properties were measured as a function of TbAs concentration, revealing a maximum thermoelectric power factor of 2.38 W/mK{sup 2} and ZT of 0.19 with 0.2% TbAs. Trends in the thermoelectric properties closely resemble those found in comparable ErAs:InGaAs nanocomposite materials. However, nanoparticles were not observed by scanning transmission electron microscopy in the highest ZT TbAs:InGaAs sample, unlike the highest ZT ErAs:InGaAs sample (0.2% ErAs) and two higher concentration TbAs:InGaAs samples examined. Consistent with expectations concerning the positioning of the Fermi level in these materials, ZT was enhanced by TbAs incorporation largely due to a high Seebeck coefficient, whereas ErAs provided InGaAs with higher conductivity but a lower Seebeck coefficient than that of TbAs:InGaAs. Thermal conductivity was reduced significantly from that of intrinsic thin-film InGaAs only with TbAs concentrations greater than {approx}1.7%.

36 MATERIALS SCIENCE↗

Fully integrated InGaAs/InP single-photon detector module with gigahertz sine wave gating

InGaAs/InP single-photon avalanche diodes (SPADs) working in the regime of GHz clock rates are crucial components for the high-speed quantum key distribution (QKD). We have developed for the first time a compact, stable, and user-friendly tabletop InGaAs/InP single-photon detector system operating at a 1.25 GHz gate rate that fully integrates functions for controlling and optimizing SPAD performance. We characterize the key parameters of the detector system and test the long-term stability of the system for continuous operation of 75 h. The detector system can substantially enhance QKD performance and our present work paves the way for practical high-speed QKD applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Self-assembly of InAs ring complexes on InP substrates by droplet epitaxy

We report the self-assembly of InAs ring complexes on InP (100) substrates by droplet epitaxy. Single-ring, ring-disk complex, and concentric double-ring structures were formed by controlling the As beam flux and substrate temperature. A clear photoluminescence signal was detected in a sample where InAs rings were embedded in InGaAs.

36 MATERIALS SCIENCE↗

Atomic structure and energy spectrum of Ga(As,P)/GaP heterostructures

The atomic structure and energy spectrum of Ga(As,P)/GaP heterostructures were studied. It was shown that the deposition of GaAs of the same nominal thickness leads to the formation of pseudomorphic GaAs/GaP quantum wells (QW), fully relaxed GaAs/GaP self-assembled quantum dots (SAQDs), or pseudomorphic GaAsP/GaP SAQDs depending on the growth temperature. We demonstrate that the atomic structure of Ga(As,P)/GaP heterostructures is ruled by the temperature dependence of adatom diffusion rate and GaAs-GaP intermixing. The band alignment of pseudomorphic GaAs/GaP QW and GaAsP/GaP SAQDs is shown to be of type II, in contrast to that of fully relaxed GaAs/GaP SAQDs, which have the band alignment of type I with the lowest electronic states at the indirect L valley of the GaAs conduction band.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Band alignment of epitaxial ZnS/Zn{sub 3}P{sub 2} heterojunctions

The energy-band alignment of epitaxial zb-ZnS(001)/{alpha}-Zn{sub 3}P{sub 2}(001) heterojunctions has been determined by measurement of shifts in the phosphorus 2p and sulfur 2p core-level binding energies for various thicknesses (0.6-2.2 nm) of ZnS grown by molecular beam epitaxy on Zn{sub 3}P{sub 2}. In addition, the position of the valence-band maximum for bulk ZnS and Zn{sub 3}P{sub 2} films was estimated using density functional theory calculations of the valence-band density-of-states. The heterojunction was observed to be type I, with a valence-band offset, {Delta}E{sub V,} of -1.19 {+-} 0.07 eV, which is significantly different from the type II alignment based on electron affinities that is predicted by Anderson theory. n{sup +}-ZnS/p-Zn{sub 3}P{sub 2} heterojunctions demonstrated open-circuit voltages of >750 mV, indicating passivation of the Zn{sub 3}P{sub 2} surface due to the introduction of the ZnS overlayer. Carrier transport across the heterojunction devices was inhibited by the large conduction-band offset, which resulted in short-circuit current densities of <0.1 mA cm{sup -2} under 1 Sun simulated illumination. Hence, constraints on the current density will likely limit the direct application of the ZnS/Zn{sub 3}P{sub 2} heterojunction to photovoltaics, whereas metal-insulator-semiconductor structures that utilize an intrinsic ZnS insulating layer appear promising.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗