Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PARTICULATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Preparation, verification, and operational control of a large space-environment-simulation chamber for contamination sensitive tests

A 2-year program to prepare chamber A at the NASA Manned Spacecraft Center for Apollo telescope mount thermal-vacuum tests is discussed. This program covers modification to existing chamber systems, the development of facility and chamber operating procedures, the selection of chamber cleaning and control methods, and the development and evaluation of diagnostic instrumentation. Extensive efforts to ensure a minimum contamination environment for the Apollo telescope mount test series are illustrated. Recent thermal-vacuum tests of this chamber at progressive stages of cleanliness have demonstrated the success achieved in reducing the particulate and molecular contamination levels of the basic chamber interior.

Visentine, J. T.↗

Development of a theory of the spectral reflectance of minerals, part 3

Significant refinements were made in the theory of the diffuse reflectance of particulate media. The theory predicts the opposite trends of reflectance with particle size in regions of the spectrum in which the particles are semi-transparent and those in which they are opaque. Enhanced absorption caused by wave-optical effects of small surface asperities and edges was used to improve the theory. The same mechanism remedies the theory to account for the data in spectral regions of anomalous dispersion.

Aronson, J. R.↗

Eclipse cooling of selected lunar features

Thermal measurements were made in the 10 to 12 micron band of the lunar surface during the total eclipse of December19, 1964. A normalized differential thermal contour map is included, showing the location of the thermal anomalies or hot spots on the disk and the eclipse cooling curves of 400 sites, of which more than 300 were hot spots. The eclipse cooling data is compared to a particulate thermophysical model of the soil.

Shorthill, R. W.↗

Comments on bistatic lidar

The use of bistatic lidar to determine the size and concentration of atmospheric aerosols is discussed. It is shown that bistatic measurements made at several scattering angles coupled with logical assumptions about the size distribution can provide estimates of the aerosol concentration, and by polarization measurements, meteorological parameters that influence the vertical distribution of particulates can be determined.

Reagan, J. A.↗

Bearing strength of the lunar soil

A discussion is presented on the bearing strength and bearing load-penetration relations in lunar soil. These were measured in air as a function of bulk density. It was found that the relation between bulk density and the logarithm of the bearing capacity is about linear. Shapes of the load vs penetration curves were observed to be similar to those obtained with particulate material of terrestrial origin.

Jaffe, L. D.↗

Apollo 15 contamination photography

The problem of optical contamination in the form of particulates in the vicinity of a spacecraft has been a source of concern for any astronomical experiment that must be performed in sunlight. This concern prompted a photographic photometric experiment on Apollo 15 to measure the brightness of the residual contamination cloud as well as the cloud produced by dumping waste water overboard. An upper limit of 10 to the minus 12.3 power B (B designates the brightness of the solar disc) was placed on the residual cloud at a 90 deg sun angle, which is comparable to the zodiacal light. The brightness of the cloud produced by the waste dump was estimated to be 10 to the minus 9.2 power B. It was observed to decrease rapidly to 10 to the -11.6 power B in minutes, then fluctuate in brightness for at least 25 minutes as additional material left the spacecraft. The cloud was observed to consist of individually resolved particle tracks estimated to be particles ranging from millimeters to centimeters in diameter in addition to a background of unresolved particles with an average diameter of 10.5 microns. Most of the tracks proceeded in straight-line paths from the dump nozzle. Several tracks violated this direction, apparently having been scattered by collisions. A few tracks appeared to have definite curvatures, which are believed to be caused by charged particle interactions.

Naumann, R. J.↗

A study of the estuarine and coastal oceanography of Block Island Sound and adjacent New York coastal waters

There are no author-identified significant results in this report. ERTS-1 imagery was received from NASA in both positive and negative form. This imagery was analyzed to determine the hydrologic features of the water mass, including current patterns, particulate in suspension, and the contacts between different water masses, as well as coastal marsh characteristics. A Spectral Data Model 64 multispectral projector/viewer was used for the analysis. Quick look analysis of the second generation negatives indicated that: (1) green spectral band lacked contrast and was overexposed; (2) red spectral had acceptable contrast, but somewhat overexposed; and (3) infrared bands overexposed for land areas, but exposure good for water. Analysis of second generation positives indicated that; (1) green spectral band extremely flat; (2) red spectral band of acceptable contrast, but too dense for projection; and (3) infrared bands lacked detail in both water and land areas. Photographs indicate that it is necessary to expose and process the multispectral imagery for the scene brightness range under consideration.

Yost, E.↗

Nature of the Martian surface as inferred from the particle-size distribution of lunar-surface material.

Analysis of lunar particle size distribution data indicates that the surface material is composed of two populations. One population is caused by comminution from the impact of the larger-sized meteorites, while the other population is caused by the melting of fine material by the impact of smaller-sized meteorites. The results are referred to Mars, and it is shown that the Martian atmosphere would vaporize the smaller incoming meteorites and retard the incoming meteorites of intermediate and large size, causing comminution and stirring of the particulate layer. The combination of comminution and stirring would result in fine material being sorted out by the prevailing circulation of the Martian atmosphere and the material being transported to regions where it could be deposited. As a result, the Martian surface in regions of prevailing upward circulation is probably covered by either a rubble layer or by desert pavement; regions of prevailing downward circulation are probably covered by sand dunes.

Mason, C. C.↗

Spectroscopic and photometric observations of M supergiants in Carina.

Spectroscopic study of 30 Southern-Hemisphere M supergiants mostly in Carina in the blue and near-infrared, and photometrical study of these stars from 0.4 to 18 microns. The uncertainties in the determinations of interstellar extinction are discussed, and the spatial distribution of the M supergiants in the Carina arm is shown. The presence of the 11-micron excess attributed to silicate dust is a common feature. Stars of the same spectral type and luminosity class are remarkably homogeneous in their long-wave behavior. The silicate feature becomes more prominent in the more luminous stars and in stars of later spectral type. Four composite systems show little long-wave excess. The two VV Cephei objects have excesses probably produced by gas emission, and the other two have little or no excess - supporting the suggestion that the presence of the early star prohibits the formation of a dust envelope. Three stars - VY CMa, VX Sgr, and HD 9767 - appear to be extreme examples of stars with large excesses over the entire long-wave region. It is suggested that these objects are surrounded by large amounts of particulate material over a great range of distances from the stars.

Humphreys, R. M.↗

A laser velocimeter for remote wind sensing.

A CW carbon dioxide laser Doppler radar has been developed and applied to remote measurement of atmospheric wind velocity and turbulence. The carbon dioxide laser illuminates residual particulate matter in the atmosphere. Radiation scattered by these particles is homodyned with a local oscillator to provide the Doppler signal. The performance of the instrument is verified by comparison of wind velocity data recorded simultaneously by the laser Doppler system and a cup-anemometer wind-vane system. All data comparisons indicate very close agreement of the two systems. Data inconsistencies are within the accuracy limitations of the conventional anemometer system. The range of the laser Doppler system during these tests was confined to approximately 30 m. Laser Doppler wind velocity data were observed at ranges exceeding 300 m; however, no conventional anemometer was set up at these ranges for data comparisons.

Lawrence, T. R.↗

The ablation of graphitic materials in the sublimation regime.

A large variety of graphitic materials have been tested in an arc heated air stream at a surface pressure of 4.3 atm and a nominal surface temperature of 3925 K. Included were commercial and developmental grades of artificial graphites, both two and three dimensional carbon-carbon composites, composites seeded with refractory compounds, and several special materials such as pyrolytic graphite, mesophase graphite, glassy carbon, and natural graphite. ATJ graphite was used as a control material. Except for the seeded materials which had poor performance, the mass loss rate for all the man-made graphitic materials fell within the range of 17 per cent less to 30 per cent more than the rate for ATJ. Thus it is concluded that wide variations in constituents, processing, fabrication and structure have relatively little effect on the ablation performance of graphitic materials, at least under the conditions of the present tests. Particulate mass loss was observed for all the materials tested and is the dominant mechanism for mass removal at the present test conditions. It is suggested that this mechanism results from physical failure, primarily by compressive thermal stress.

Lundell, J. H.↗

Minor planets and related objects. VIII - Deimos.

Evaluation of 12 polarization measurements of Deimos in blue light were obtained at phase angles between 5 and 31 deg. A well-developed negative branch, with minimum polarization approximately -1.5% near phase angle 11 deg, indicates that Deimos is not bare rock but has a particulate surface layer of dark dust or powder. The phase angle of inversion is 19.5 deg, and the slope of the positive branch is 0.26 plus or minus 0.01% per degree. On the basis of the slope-albedo law for the moon and the major asteroids, the geometrical albedo of Deimos in blue light should be 0.07 plus or minus 0.01, and the radius 5.4 plus or minus 0.8 km. These values are in good agreement with preliminary Mariner 9 data.

Zellner, B.↗

Thermal properties of granulated materials.

Review of the thermophysical properties of granular materials or silicates believed to simulate the lunar surface layer. Emphasis is placed on thermal conductivity data and the effects of material and environmental variables on the thermal conductivity. There are three basic mechanisms of heat transfer in particulate materials: conduction by the gas contained in the void spaces between the particles; conduction within the solid particles and across the interparticle contacts; and thermal radiation within the particles, across the void spaces between particle surfaces, and between void spaces themselves. Gas and solid conduction, thermal radiation, and the interaction between conduction and radiation are considered.

Wechsler, A. E.↗

Aeolian processes on Mars - Erosive velocities, settling velocities, and yellow clouds.

Extremely high atmospheric wind velocities are needed to erode particulate matter on Mars. Settling velocities are roughly equivalent to terrestrial settling velocities for clay to fine sand-size particles; suspension transport may be dominant for fine particles on Mars. Yellow clouds suggest that required threshold erosion velocities are reached and that a great deal of fine-grained material is carried in suspension. Yellow cloud origins are concentrated over the southern latitudes and areas of major topographic relief. The cloud distribution pattern suggests that high threshold velocities are attained by transient atmospheric disturbances such as slope winds and dust devils.-

Arvidson, R. E.↗

Nonuniform concentration - A mechanism for drag reduction.

A large reduction in drag coefficient has been observed in certain external flows of aqueous solutions with high molecular weight polymer additives. A change in the near wake configuration is phenomenologically responsible for the drag reduction, but the underlying mechanism is presently unknown. An analogy to known phenomena in particulate suspensions is drawn which suggests nonuniform concentration of the polymer additive as an explanation. An analysis of the boundary layer on a sphere with varying viscosity was made to investigate the effect. The results indicate early transition to turbulence for concentration variations whose length scale is small compared with the momentum boundary layer thickness. Stabilization and delayed transition are indicated for thicker concentration layers. Observations are suggested for the thin concentration layers.

Rivard, W. C.↗

Four years of dust particle measurements in cislunar and selenocentric space from Lunar Explorer 35 and OGO 3.

Since July 1967, knowledge concerning the distributions of picogram size particulate matter in selenocentric space has been obtained from the Lunar Explorer 35 dust particle experiment. For almost 40% of the time, the mean sporadic cumulative flux is quite similar to the flux in interplanetary space. However, there are fluctuations of an order of magnitude during major meteor showers. The coincident increase of the flux in selenocentric space during the shower periods has been observed for the fourth year. The 100-picogram sensor does not show an increase during shower times, indicating a mass threshold of less than 100 picograms for particles with velocities equal to or greater than lunar escape velocity. The flux values from Lunar Explorer 35 are compared to other long-lifetime measurements in selenocentric, cislunar and interplanetary space with excellent agreement for masses less than one nanogram.

Alexander, W. M.↗

The prospects for mineral analysis by remote infrared spectroscopy.

An investigation of the effects of physical parameters on the spectra of minerals has been carried out, and an attempt made to develop a comprehensive theory of the reflectance (or emittance) spectra of particulate surfaces. The theory involves the effects of particle size, surface roughness, porosity, and mixing ratios on the spectra of mineralogical assemblages. The true spectral information is represented by the refractive indices and absorption coefficients of the constituent minerals. The present theory and the Mie theory for a cloud of well separated quartz particles are compared, as well as theoretical and experimental reflectances of quartz powders, glass beads, and corundum powders. Experimental results of abrading sapphire are presented.

Aronson, J. R.↗