Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Oxidation behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Delineating the Factors Impacting the Electrochemical Behavior of Single-Crystal High-Nickel Layered Oxide Cathodes

High-nickel (Ni) (≥80%) single-crystal LiNi 1-x-y Mn x Co y O 2 (NMCs) have garnered recent interest as cathodes in lithium (Li)-ion batteries (LIBs). However, capacity fade at high voltages, particularly after the onset of the H2–H3 phase transition, hampers their viability. In this study, single-crystal LiNi 0.8 Mn x Co 0.2-x O 2 (x = 0.2, 0.1, 0) are synthesized and tested in LiPF 6 in ethyl methyl carbonate-based electrolytes, with and without monofluoroethylene carbonate and LiF 2 PO 2 additives, to clarify the effects of Co/Mn ratio and surface stabilization on high-voltage cycling degradation. By imposing a kinetic barrier to the accessible H2–H3 capacity, surface reconstruction is identified as the primary driver of high-voltage capacity loss, being greater in the Co-free cathode and in the absence of fluorinated electrolyte components. This is attributed to a synergy between increased mechanical stress due to worsened bulk and interfacial H2–H3 kinetics and decreased interfacial stability due to the poor passivating capability of the electrolyte. Here, the findings highlight the importance of limiting cathode impedance growth during high-voltage cycling, which can be achieved by tuning bulk dopants and electrolyte chemistry.

25 ENERGY STORAGE↗

Dynamic Behavior of Platinum Atoms and Clusters in the Native Oxide Layer of Aluminum Nanocrystals

Strong metal–support interactions (SMSIs) are well-known in the field of heterogeneous catalysis to induce the encapsulation of platinum (Pt) group metals by oxide supports through high temperature H 2 reduction. However, demonstrations of SMSI overlayers have largely been limited to reducible oxides, such as TiO 2 and Nb 2 O 5 . In this report we show that the amorphous native surface oxide of plasmonic aluminum nanocrystals (AlNCs) exhibits SMSI-induced encapsulation of Pt following reduction in H 2 in a Pt structure dependent manner. Reductive treatment in H 2 at 300 °C induces the formation of an AlO x SMSI overlayer on Pt clusters, leaving Pt single-atom sites (Ptiso) exposed available for catalysis. The remaining exposed Pt iso species possess a more uniform local coordination environment than has been observed on other forms of Al 2 O 3 , suggesting that the AlO x native oxide of AlNCs presents well-defined anchoring sites for individual Pt atoms. This observation extends our understanding of SMSIs by providing evidence that H 2 -induced encapsulation can occur for a wider variety of materials and should stimulate expanded studies of this effect to include nonreducible oxides with oxygen defects and the presence of disorder. It also suggests that the single-atom sites created in this manner, when combined with the plasmonic properties of the Al nanocrystal core, may allow for site-specific single-atom plasmonic photocatalysis, providing dynamic control over the light-driven reactivity in these systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Focus Issue: Understanding Water-Oxide Interfaces to Harness New Processes and Technologies. Introduction

Water interaction with metal oxides plays a fundamentally important role across environmental chemistry, geochemistry, catalysis, and in the control and performance of functional nanocrystalline oxides. Water is found virtually everywhere on Earth, from bulk fluid to trace molecules, and its interaction with natural and engineered materials often defines or at least influences a key part of their chemical and physical behavior. In turn, metal oxides play a dominant role as mineral particles across most natural environments, while comprising a compelling and versatile platform for the development of new functional materials with tailored properties that benefit society. Given the intrinsic correlation of their properties to water interactions, it is a common goal across materials and chemical sciences to develop a comprehensive understanding of water adsorption, water film formation, and water-mediated reactions on metal oxide surfaces. This is certainly true in heterogeneous catalysis and electrocatalysis, where water is omnipresent either as a reactant, a medium, an inhibitor or as a trace component in the feed. The effect of water on the morphological evolution during synthesis, particle assembly, and sintering is also important to the stability and functional properties of oxide nanostructures. Such processes are intimately related to how water molecules interact with their surfaces and affect local physical-chemical conditions.

Rosso, Kevin M.↗

On the behavior of Bronsted-Evans-Polanyi Relations for Transition Metal Oxides

Versatile Broensted-Evans-Polanyi (BEP) relations are found from density functional theory for a wide range of transition metal oxides including rutiles and perovskites. For oxides, the relation depends on the type of oxide, the active site and the dissociating molecule. The slope of the BEP relation is strongly coupled to the adsorbate geometry in the transition state. If it is final state-like the dissociative chemisorption energy can be considered as a descriptor for the dissociation. If it is initial state-like, on the other hand, the dissociative chemisorption energy is not suitable as descriptor for the dissociation. Dissociation of molecules with strong intramolecular bonds belong to the former and molecules with weak intramolecular bonds to the latter group. We show, for the prototype system La-perovskites, that there is a 'cyclic' behavior in the transition state characteristics upon change of the active transition metal of the oxide.

36 MATERIALS SCIENCE↗

Measuring the Wear and Abrasive Resistance of Air Plasma Sprayed Aluminum Oxide for Lunar Exploration

Lunar regolith, especially finer dust particles traveling at high velocities, can cause significant wear and abrasive damage to structural components that ensure a prolongated presence on the surface of the Moon. With the absence of an atmosphere and lower gravity than on Earth, regolith particles maintain high velocities at large distances from where they were generated, for example next to lunar landers. Wear-resistant ceramic and ceramic composite materials can improve the durability of spacecraft components during long missions on the Moon’s surface. Aluminum oxide coatings are lightweight, have multifunctional properties, and have high strength including high hardness and wear resistance. These properties can help improve the durability of structures used in space exploration. Air plasma sprayed (APS) aluminum oxide coatings have demonstrated the potential to protect critical structures. This study investigated the abrasive wear resistance of APS aluminum oxide coatings via Taber abrasion experiments. Taber abrasion offers the advantage of quantifying the abrasive wear behavior of particles with different shapes on a surface. In this work, an abrasive wheel made of silicon carbide was utilized to evaluate wear properties of specimens progressively over 5000 cycles. This experiment focused on testing two series of specimens to determine whether a bond coat composed of nickel, chromium, aluminum, and yttrium (NiCrAlY) improved the protective behavior of the APS aluminum oxide coating. The specimens varied in topcoat thickness and were made with and without an approximately 100 µm bond coat layer. The mass of the specimens was measured at 400 cycles, 800 cycles, 3800 cycles, and 5000 cycles. Increasing thickness was found to result in higher wear for samples with and without a bond coat. Increased mass loss in samples with a bond coat was observed indicating a need for further studies on the overall impact of the use of a bond coat on the protective behavior of the coatings. To continue designing wear resistant coatings for structural protection in space missions, the multifunctional properties of the APS aluminum oxide coating will be studied. Future experiments will determine whether the APS aluminum oxide coating can protect the structures from other aspects of the harsh space environment, such as extreme temperature variations and ionizing radiation.

aluminum oxide↗

Ternary and coupled binary zinc tin oxide nanopowders: Synthesis, characterization, and potential application in photocatalytic processes

Highlights: • Mechanochemically synthesized nanocrystalline zinc tin oxide (ZTO) powders. • Photocatalytic degradation of alprazolam in the presence of ZTO water suspensions. • Coupled binary ZTO exhibits enhanced photocatalytic activity compared to ternary ZTO. - Abstract: In this paper, ternary and coupled binary zinc tin oxide nanocrystalline powders were prepared via simple solid-state mechanochemical method. X-ray diffraction, scanning electron microscopy, Raman and reflectance spectroscopy were used to study the structure and optical properties of the obtained powder samples. The thermal behavior of zinc tin oxide system was examined through simultaneous thermogravimetric-differential scanning calorimetric analysis. The efficiencies of ternary (Zn{sub 2}SnO{sub 4} and ZnSnO{sub 3}) and coupled binary (ZnO/SnO{sub 2}) zinc tin oxide water suspensions in the photocatalytic degradation of alprazolam, short-acting anxiolytic of the benzodiazepine class of psychoactive drugs, under UV irradiation were determined and compared with the efficiency of pure ZnO and SnO{sub 2}.

36 MATERIALS SCIENCE↗

A Thermodynamic Reassessment of Lithium-Ion Battery Cathode Calorimetry

This work demonstrates how staged heat release from layered metal oxide cathodes in the presence of organic electrolytes can be predicted from basic thermodynamic properties. These prediction methods for heat release are an advancement compared to typical modeling approaches for thermal runaway in lithium-ion batteries, which tend to rely exclusively on calorimetry measurements of battery components. These calculations generate useful new insights when compared to calorimetry measurements for lithium cobalt oxide (LCO) as well as the most common varieties of nickel manganese cobalt oxide (NMC) and nickel cobalt aluminum oxide (NCA). Accurate trends in heat release with varying state of charge are predicted for all of these cathode materials. These results suggest that thermodynamic calculations utilizing a recently published database of properties are broadly applicable for predicting decomposition behavior of layered metal oxide cathodes. Aspects of literature calorimetry measurements relevant to thermal runaway modeling are identified and classified as thermodynamic or kinetic effects. The calorimetry measurements reviewed in this work will be useful for development of a new generation of thermal runaway models targeting applications where accurate maximum cell temperatures are required to predict cascading cell-to-cell propagation rates.

25 ENERGY STORAGE↗

High‐Pressure Characterization of High‐Performance Insensitive Energetic Materials: Dihydroxylammonium 5,5’‐Bis(3‐Nitro‐1,2,4‐Triazolate‐1 N ‐Oxide) (MAD‐X1)

Abstract The high‐pressure behavior of dihydroxylammonium 5,5’‐bis(3‐nitro‐1,2,4‐triazolate‐ 1 N ‐oxide) (MAD‐X1) was studied at room temperature to 25 GPa by Raman spectroscopy and powder X‐ray diffraction. No evidence of polymorphism was observed over this pressure range, indicating that the ambient structure of MAD‐X1 remains stable up to conditions similar to the detonation pressure of the material. Additionally, such findings suggest that this high performance material can serve as an insensitive RDX replacement in energetic formulations without the concern of uncontrolled polymorphism that might otherwise affect the performance and safety of the munition.

Bennion, Jonathan C.↗

Mechanisms and site requirements for NO and NH 3 oxidation on Cu/SSZ-13

Two series of Cu/SSZ-13 catalysts were synthesized via aqueous solution and solid-state ion exchange using SSZ-13 supports of varying Si/Al ratios. The isolated and multinuclear Cu content of these catalysts were determined by H 2 temperature programmed reduction (H 2 -TPR). Multinuclear Cu in these catalysts, including in situ Cu- dimers formed from ZCu II OH coupling and permanent CuO clusters, are active species for dry NO oxidation. NH 3 oxidation on these catalysts follows an internal SCR (i-SCR) mechanism, i.e., a portion of NH 3 is first oxidized to NO, then NO is selectively reduced by the remaining NH 3 to N 2 . NH 3 oxidation displays distinct kinetic behavior below ~300 °C and above ~400 °C. At low temperature the results indicate that NH 3 -solvated mobile Cu-ions are the active centers. CuO clusters, when present, also contribute to the low temperature activity by catalyzing NH 3 oxidation to NO. At high temperature, in situ Cu-dimers and CuO clusters catalyze NH 3 oxidation to NO, and isolated Cu-ions catalyze SCR to realize the cascade turnovers. For both NO and NH 3 oxidation, Cu-dimers balanced by framework charges of close proximity appear to be more active than Cu-dimers balanced by distant framework charges. However, the former Cu-dimers are less stable than the latter and tend to split into monomers in the presence of vicinal Brønsted acid sites. Via density functional theory (DFT) calculations, the i-SCR mechanism for low temperature NH 3 oxidation, i.e., the energetic favorability for the involvement of the NO intermediate, is justified. Furthermore, the DFT results also agree with experimental data that the formation of Cu-dimers from ZCu II OH dimerization is essential for NH 3 oxidation at high temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of precipitates in oxide film on hydrogen pick-up of zirconium alloys

In this study, we examined the effect of alloying elements on hydrogen pick-up. The alloying elements of Fe, Cr, and Ni form precipitates in Zircaloy because of their low dissolvability in Zirconium. The precipitates in oxide film are presumed to play an important role in the hydrogen pick-up process because oxide film is a pathway of hydrogen entry. A corrosion test was performed in pure water at 561 K, and the relation between the additive elements and the hydrogen pick-up was estimated by using Zircaloy-2 and Zircaloy-4. The behavior of precipitates in oxide film was estimated using TEM observation and molecular dynamic simulation. The results show that the un-oxidized precipitates had a tendency to substitute for the oxidized precipitates with distance from the metal-oxide film boundary. Additionally, precipitates containing a high concentration of oxygen were observed. The oxidation of the precipitates was confirmed. It was also shown that the Fe/Cr fraction of precipitates had a tendency to decrease with distance from the metal-oxide film boundary. It was confirmed that the diffusion coefficients of H{sup +} in the iron- or chromium-containing ZrO{sub 2} are smaller than those of the pure ZrO{sub 2} by molecular dynamics simulation. These results lead to the conclusion that the diffusion of Cr and Fe in oxide film contributes to the control of hydrogen pick-up on zirconium alloys as does the oxidation of precipitates.

36 MATERIALS SCIENCE↗

Grain size dependence of thermally induced oxidation in zirconium carbide

Here complementary analytical approaches were employed to probe the effect of grain size on thermally induced oxidation of zirconium carbide (ZrC) utilizing thermogravimetric analysis, differential scanning calorimetry, and Raman spectroscopy, as well as synchrotron-based and laboratory-based X-ray diffraction (XRD) experiments. The oxidation mechanism and phase behavior of nanocrystalline ZrC (grain size ~ 20 nm) were compared with that of the more documented microcrystalline ZrC (grain size ~ 1 µm). Synchrotron XRD at the Advanced Photon Source with a hydrothermal diamond anvil cell (HDAC) used as a sample chamber revealed that the onset of oxidation is at ~ 380 °C for microcrystalline ZrC which is in agreement with previous work. In contrast, the critical oxidation temperature was ~ 330 °C for nanocrystalline ZrC. Additional high-temperature synchrotron XRD experiments at the National Synchrotron Light Source II using a lamp furnace in combination with Raman analysis showed that tetragonal ZrO 2 forms as an initial oxidation product and transforms at higher temperatures to the monoclinic phase. Thermogravimetric analysis (TGA) coupled with differential scanning calorimetry (DSC) confirmed the X-ray results of a lower critical oxidation temperature for the nanocrystalline sample. The phase transformations in the oxide phase with associated critical temperatures were also evident in the thermodynamic data as exothermic heat events.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Characterization of Fe–Cr alloy metallic interconnects coated with LSMO using the aerosol deposition process

Graphical abstract: - Highlights: • Lanthanum strontium manganite (LSMO) as the protective layer for metallic interconnects was successfully prepared by aerosol deposition method (AD). • The microstructure, electrical resistance and composition for LSMO-coated Fe–Cr alloys undergoing high temperature, long-hour oxidation were investigated. • The denser protective layer prepared by AD might effectively prohibit the growth of oxidized scale after long time running at 800 °C in air. - Abstract: A Fe–Cr alloy, used for metallic interconnects, was coated with a protective layer of lanthanum strontium manganite (LSMO) using the aerosol deposition method (AD). The effects of the LSMO protective layer, which was coated on the Fe–Cr interconnects using AD, on the area specific resistance (ASR) during high temperature oxidation and the Cr evaporation behaviors were systematically investigated in this paper. The microstructures, morphologies, and compositions of the oxidized scales that appeared on the LSMO-coated Fe–Cr alloy after annealing at 800 °C for 750 h in air were examined using SEM equipped with EDS. The EPMA mapping of the LSMO-coated Fe–Cr interconnects undergoing long term, high-temperature oxidation was used to explain the formation layers of the oxidized scale, which consists of (Mn,Cr){sub 3}O{sub 4} and Cr{sub 2}O{sub 3} layers. Moreover, the experimental results revealed that the AD process is a potential method for preparing denser protective layers with highly desirable electrical properties for metallic interconnects.

36 MATERIALS SCIENCE↗

Li–Mn–O Li-rich cation disordered rock-salt cathode materials do not undergo reversible oxygen redox during cycling

An in-depth study of “Li 4 Mn 2 O 5 ”, a nanocomposite of Li 2 O and Li 4-x Mn 2 O 5 with a disordered rock salt structure (LMO), was conducted to determine the origins of the observed anomalously high charge and discharge capacity in lithium cells, which can exceed 350 mA h g -1 . Using soft and hard X-ray absorption spectroscopy (XAS), mapping of resonant inelastic X-ray scattering (mRIXS), and X-ray Raman spectroscopy (XRS), it was determined that electrochemical decomposition of Li 2 O upon charge and reduction of Mn to below 3+ during discharge is responsible for the capacities that are observed, with no evidence of contributions from reversible oxygen redox. Here, the over-reduction is exacerbated when charging limits of 4.5–4.8 V are used due to side reactions between electrolytic solution and the highly oxidized active material. These side reactions result in dissolution of Mn at room temperature and release of oxygen and other gases during initial cycles, which, in turn, cause rapid capacity fading. This is accompanied by evolution of the voltage profile upon cycling towards one that resembles that of manganese oxide spinels. The cycling behavior can be improved somewhat by reducing the upper voltage limit, although this results in a diminishment of the discharge capacities below 200 mA h g -1 . By adding various amounts of spinel LiMn 2 O 4 during synthesis, it was possible to produce LMOs with rock salt structures having significantly improved cycling behavior but still having capacities in excess of 250 mA h g -1 . An optimized modified material also exhibits better rate capability and much less gas evolution during initial cycles than the unmodified LMO. Interestingly, as-made modified materials generally exhibited lower than expected average Mn oxidation states attributable to oxygen loss during the synthesis process, as well as higher capacities than expected based on their manganese contents. The oxygen loss during processing may reduce the activity of the remaining oxygen and account for the lower reactivity of the spinel-modified material.

25 ENERGY STORAGE↗

Magnetic frustration control through tunable stereochemically driven disorder in entropy-stabilized oxides

Entropy-stabilized oxides possess a large configurational entropy that allows for the unique ability to include typically immiscible concentrations of species in different configurations. Particularly in oxides, where the physical behavior is strongly correlated to stereochemistry and electronic structure, entropic stabilization creates a unique platform to tailor the interplay of extreme structural and chemical disorder to realize unprecedented functionalities. Here, we control stereochemically driven structural disorder in single crystalline, rocksalt, (MgCoNiCuZn)O-type entropy-stabilized oxides through the incorporation of Cu 2+ cations. We harness the disorder to tune the degree of glassiness in the antiferromagnetic structure. Structural distortions driven by the Jahn-Teller effect lead to a difference in valence on the Co cation sites, which extends to dilution and disorder of the magnetic lattice. A spin glass model reveals that the fractional spin ordering of the magnetic lattice can be tuned by ~65%. These findings demonstrate entropy-stabilization as a tool for control of functional phenomena.

36 MATERIALS SCIENCE↗

Atomically Revealing Bulk Point Defect Dynamics in Hydrogen‐Driven γ‐Fe 2 O 3 → Fe 3 O 4 → FeO Transformation

Understanding how point defects in the bulk govern redox transformations is essential for advancing hydrogen-based metal production and designing high-performance oxide materials. This study reveals the atomic-scale mechanisms driving hydrogen-induced reduction of γ-Fe 2 O 3 to Fe 3 O 4 , focusing on how bulk vacancy dynamics dictate structural evolution and reaction kinetics. A key finding is the pronounced contrast in defect behavior between the two oxides: in γ-Fe 2 O 3 , intrinsic Fe vacancies promote oxygen vacancy clustering, destabilizing the local lattice and driving nanopore formation. In contrast, Fe 3 O 4 exhibits a higher oxygen vacancy formation energy and lacks intrinsic Fe vacancies, suppressing vacancy aggregation and maintaining a dense, pore-free structure. This divergence governs distinct reduction pathways—γ-Fe 2 O 3 undergoes an interface-reaction-limited transformation confined to the γ-Fe 2 O 3 /Fe 3 O 4 boundary, while Fe 3 O 4 supports a uniform increase in oxygen vacancy concentration, enabling bulk-phase reduction to lower-oxide FeO. Integrated in situ electron microscopy and density functional theory modeling uncover a vacancy-mediated mechanism, where synergistic cation-anion vacancy dynamics steer microstructure evolution and phase progression. These insights highlight the critical role of vacancy dynamics in controlling oxide reactivity and offer a pathway toward vacancy engineering to enhance reduction kinetics in hydrogen metallurgy and to tailor porosity, reactivity, and structural resilience in oxide-based catalysts and energy materials.

36 MATERIALS SCIENCE↗

Chemical factors controlling the behaviour of oxide cathodes in batteries

Oxide cathodes enable high-energy lithium-ion and sodium-ion batteries, with their performances fundamentally governed by three interrelated chemical factors: electronic configuration, chemical bonding, and chemical reactivity. Here, we illustrate how these factors dictate the redox energy, structural stability, ionic and electronic transport, and interfacial behavior in both layered oxide and polyanion oxide cathodes. We discuss how crystal-field effects and octahedral-site stabilization energies influence cation migration, and how inductive effects tune bond covalency and operating voltages. We also explain how chemical bonding governs thermal stability, gas evolution, and first-cycle capacity loss, and how alignment of transition-metal redox band with the oxygen 2p band determines electrolyte reactivity. Comparison between lithium and sodium layered oxides further reveals how differences in Li-O and Na-O bond ionicity affect chemical reactivity. Finally, we outline strategies including compositional tuning, surface doping, and electrolyte optimization, and emphasize how high-throughput, data-driven approaches in guiding the design of next-generation oxide cathodes.

25 ENERGY STORAGE↗

Electrochemical stability, physical, and electronic properties of thermally pre-formed oxide compared to artificially sputtered oxide on Fe thin films in aqueous chloride

Here the electrochemical stability and corrosion behavior of the thermally pre-oxidized and sputter deposited variant of an oxide single-crystalline Fe thin film were compared. Thermal oxides formed Fe 2 O 3 over an inner layer of Fe 3 O 4 while the sputtered oxides were found to have grown Fe 3 O 4 instead of the target stoichiometry of Fe 2 O 3 . Oxide films of both types were stable in pH=9.3 borate buffer solution, however, were altered in pH=9.3, 0.1 M NaCl solution in the case of thermally pre-oxidized Fe thin film. The stability of the oxide differed in pH=4, 0.1 M NaCl where sputtered Fe films were more stable against acidic chemical dissolution than the thermally formed Fe oxide film. These differences were traced by AC/DC electrochemical analysis including electronic defect densities, and molecular identity characterized by ex-situ X-ray photoelectron spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stable Co-valorization of Carbon Dioxide and Methane via Dynamic Reconstruction of a Metal Oxide Solid Solution Catalyst

Dry reforming of methane (DRM) is a process that converts two greenhouse gases (methane and carbon dioxide) into syngas, a mixture of H 2 and CO, that can lead to a variety of value-added chemicals. Owing to its endothermic nature, high reaction temperatures up to 800 °C are typically required and the grand challenge lies in developing robust catalysts without sintering and coking-induced deactivation during the long-term on-stream operation. Towards this aim, herein, a robust complex oxide-supported NiCu alloy catalyst was generated in situ during DRM. By leveraging the configurational stability of a solid oxide solution precursor, tightly anchored NiCu bimetallic nanoparticles were in situ exsoluted and acted as the active sites in DRM. The as-afforded catalyst exhibited stable performance for DRM due to the ability to repel coke off the surface as the reaction proceeds. Kinetic experiments along with top surface characterization detail the reconstruction behavior of the solid oxide solution under DRM reaction conditions. In conclusion, the fundamental insights from this work provide guidance on generating resistant and flexible catalysts via in situ active sites formation from easily synthesized metal oxide solid solutions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗