Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Optical properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Effect of contamination on the optical properties of transmitting and reflecting materials exposed to a MMH/N2O4 rocket exhaust

The changes are presented in spectral transmittance, and reflectance due to exposure of various optical materials to the exhaust plume of a 5-pound thrust bipropellant rocket. The engine was fired in a pulsed mode for a total exposure of 223.7 second. Spectral optical properties were measured in air before and after exposure to the exhaust plume in vacuum. The contaminating layer resulted in both absorption and scattering effects which caused changes as large as 30-50% for transmitting elements and 15% for mirrors in the near ultraviolet wavelengths. The changes in spectral properties of materials exposed to the exhaust plume for 44 and 223.7 seconds are compared and found to be similar.

Bowman, R. L.↗

Retrieval of aerosol optical properties from multi-angle satellite imagery

Simulation multiangle imagery have been used to investigate the capabilities of a novel method for retrieval of atmospheric aerosol optical properties over land; this method employs spatial contrasts within the imagery and compares the spatial Fourier transforms of the multiangle images at zero and nonzero spatial frequencies. While requiring the definition of a relationship between the angular variation of the Fourier transform of the intrinsic surface angular reflectance at the zero and nonzero frequencies, the method assumes no a priori knowledge about aerosols or surface characteristics. Sensitivities to various aerosol properties are assessed.

Martonchik, John V.↗

Annealing effects on structural, electrical and optical properties of antimony-tinoxide thin films deposited by sol gel dip coating technique

Antimony-doped tin dioxide possess interesting physical and chemical properties. These properties have a wide range of applications such as catalysis and optoelectronic devices. In the present study, antimony-doped tin oxide (SnO2:Sb) thin films were deposited on the quartz substrates by sol-gel dip coating technique. The films were annealed at temperatures 350°C, 550°C and 850°C in air for 2 hours. The structure and surface morphologies were observed by X-ray diffraction (XRD) and Scanning electron microscopy (SEM). XRD patterns shows tetragonal structure for the SnO2:Sb films annealed at different temperatures. Crystallite size increased from 6 to 14 nm as annealing temperature increased from 350°C to 850°C. SEM studies reveals crack free and smooth surface for all the films. The grains are found to be homogenously distributed for films annealed at higher temperature. The electrical conductivity of the films annealed at 350°C and 550°C decreased and increased for the films annealed at 850°C. The optical properties of the films were investigated in the UV-visible-NIR region (200-900 nm) using UV spectra. The transmittance of the films decreased for films annealed at higher temperature. The optical energy band gap values (4.13 eV-4.83 eV) increased with the increase in annealing temperature.

36 MATERIALS SCIENCE↗

Effect of Sn doping on nonlinear optical properties of quaternary Se-Sn-(Bi,Te) chalcogenide thin films

The aim of this work is to report the effect of Sn doping on the third order nonlinear optical properties of chalcogenide Se{sub 84-x}Te{sub 15}Bi{sub 1.0}Sn{sub x} thin films. Melt quenching technique has been used for the preparation of bulk chalcogenide glasses. Thin films of the studied composition are deposited on cleaned glass substrate by thermal evaporation technique. Optical band gap (E{sub g}) is calculated by using Tauc extrapolation method and is found to increase from 1.27 eV to 1.64 eV with the incorporation of Sn content. Stryland approach is utilized for the calculation of two photon absorption coefficient (β{sub 2}). The nonlinear refractive index (n{sub 2}) and third order susceptibility (χ{sup (3}) are calculated using Tichy and Ticha approach. The result shows that nonlinear refractive index (n{sub 2}) follows the same trend as that of linear refractive index (n). The values of n{sub 2} of studied composition as compared to pure silica are 1000-5000 times higher.

36 MATERIALS SCIENCE↗

Tailoring SnO 2 , (Mg,Zn)O, and Ga:(Mg,Zn)O electro-optical properties and stability for solar cells

The electron density, mobility, bandgap, and band alignment of transparent conducting oxides (TCOs) can be tailored by adjusting composition and stoichiometry, thereby enabling interface engineering for diverse semiconductor applications. For example, solar cell efficiency can change enormously by adjusting TCO properties. At the same time, these TCO properties can shift during the deposition of other layers, anneals, and device operation. An ideal TCO should have tunable but stable electro-optical properties. Here, we deposit SnO 2 , (Mg,Zn)O (MZO), and Ga:(Mg,Zn)O (GMZO) films on glass and measure electro-optical characteristics before and after reducing, inert, oxidizing, and CdCl2 anneals over a range of temperatures. Electron density generally increases in the progression from oxidizing to inert and reducing ambients. SnO 2 is relatively stable compared to MZO but has less flexibility for interface engineering. We investigate GMZO as a similar but more stable alternative to MZO.The addition of Ga to MZO has significant effects on electron density and improves electro-optical stability, which can be advantageous for semiconductor applications. Furthermore, we demonstrate that GMZO can be readily incorporated into solar cells.

14 SOLAR ENERGY↗

Effect of lateral size and thickness on the electronic structure and optical properties of quasi two-dimensional CdSe and CdS nanoplatelets

The effect of lateral size and vertical thickness of CdSe and CdS nanoplatelets (NPLs) on their electronic structure and optical properties are investigated using an effective-mass envelope function theory based on the 8-band k ⋅ p model with valence force field considerations. Volumetrically larger NPLs have lower photon emission energy due to limited quantum confinement, but a greater transition matrix element (TME) due to larger electron-hole wavefunction overlap. The optical gain characteristics depend on several factors such as TME, Fermi factor, carrier density, NPL dimensions, material composition, and dephasing rate. There is a red shift in the peak position, more so with an increase in thickness than lateral size. For an increasing carrier density, the gain spectrum undergoes a slight blue shift due to band filling effect. For a fixed carrier density, the Fermi factor is higher for volumetrically larger NPLs and so is the difference between the quasi-Fermi level separation and the effective bandgap. The transparency injection carrier density (and thus input current density threshold) is dimension dependent and falls for volumetrically larger NPLs, as they can attain the requisite exciton count for transparency with a relatively lower density. Between CdSe and CdS, CdSe has lower emission energy due to smaller bandgap, but a higher TME due to lower effective mass. CdS, however, has a higher so hole contribution due to a lower spin-orbit splitting energy. Both CdSe and CdS NPLs are suitable candidates for short-wavelength LEDs and lasers in the visible spectrum, but CdSe is expected to exhibit better optical performance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Temperature dependent optical properties of pentacene films on zinc oxide

The optical transitions of pentacene films deposited on ZnO have been studied by absorption spectroscopy as a function of temperature in the range of room temperature down to 10 K. The pentacene films were prepared with thicknesses of 10 nm, 20 nm, and 100 nm on the ZnO-O(000-1) surface by molecular beam deposition. A unique temperature dependence has been observed for the two Davydov components of the excitons for different film thicknesses. At room temperature, the energetic positions of the respective absorption bands are the same for all films, whereas the positions differ more than 20 meV at 10 K caused by the very different expansion coefficients of pentacene and ZnO. Although the pentacene is just bonded via van der Waals interaction to the ZnO substrate, the very first pentacene monolayer (adlayer) is forced to keep the initial position on the ZnO surface and suffering, therefore, a substantial tensile strain. For all the subsequent pentacene monolayers, the strain is reduced step by step resulting electronically in a strong potential gradient at the interface.

36 MATERIALS SCIENCE↗

Optical properties of thin GaSe/n-Si(111) films

Morphological and optical studies (ellipsometry and reflectance spectroscopy in the ranges 400-750 nm and 1.4-25 {mu}m) of thin GaSe films fabricated by thermal evaporation on the n-Si (111) single-crystal substrates are reported. The film thickness was 15-60 nm. It is established that, in the initial stage of growth, the growth of GaSe on the n-Si (111) substrates occurs via formation of islands (three-dimensional growth). It is shown that, as the thickness increases, the physical parameters of the film change and the films approach single crystals in crystalline and energy band structure. For films with a thickness of 60 nm, the reflectance band peak is attributed to indirect optical transitions enhanced by reflection from the film-substrate interface. From the results of optical studies, quantum effects in the surface region of the thin films are conjectured.

36 MATERIALS SCIENCE↗

Low-frequency Excitation in the Optical Properties of Superconducting CeCoIn5

The far-infrared optical response of CeCoIn{sub 5}, a superconducting heavy fermion metal with a T{sub C} of 2.3 K, was investigated from 5-40 cm{sup -1} at temperatures from 0.5-2.5 K using a polarizing interferometer and a He{sup 3} cryostat. A strong absorption feature is revealed at low temperatures which appears to be a gap in the density of states, reminiscent of the energy gap seen in the hidden order state in URu{sub 2}Si{sub 2}. The depth of the spectral structure decreases with increasing temperature from 0.5 to 2.5 K indicating that the characteristic temperature for this behavior is close to the superconducting T{sub C}. A peak in the superconducting state Kramers-Kronig-derived optical conductivity occurs just above the gap at 1.5 meV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Diel Variations in Optical Properties of Micromonas pusilla, a Prasinophyte

A laboratory experiment was conducted on cultures of Micromonas pusilla, a marine prasinophyte, to investigate how cell growth and division affect the optical properties over the light:dark cycle. Measurements were made of cell size and concentration, attenuation and absorption coefficients, flow cytometric light scattering (in forward and side directions), chlorophyll and carbon content. Refractive index was calculated using the anomalous diffraction approximation Cells were about 1.5 micrometers in diameter and exhibited phased division, with the major division burst occurring during the night. Typical diel variations were observed, with cells increasing in size and light scattering during the day as they photosynthesize and decreasing at night upon division. The cells were in ultradian growth, with more than one division per day, at a light level of 120 Mu-mol photons m/sq/sec. Since these cells are similar in size to small phytoplankton that are typically abundant in field samples, these results can be used in the interpretation of diel variations in light scattering in natural populations of phytoplankton.

DuRand, Michele D.↗

Syntheses, Structure, Magnetism, and Optical Properties of the Ordered Interlanthanide Copper Chalcogenides Ln{sub 2}YbCuQ{sub 5} (Ln = La, Ce, Pr, Nd, Sm; Q = S, Se): Evidence for Unusual Magnetic Ordering in Sm{sub 2}YbCuS{sub 5}

Ln{sub 2}YbCuQ{sub 5} (Ln = La, Ce, Pr, Nd, Sm; Q = S, Se) have been prepared by direct reaction of the elements in Sb{sub 2}Q{sub 3} (Q = S, Se) fluxes at 900 °C. All compounds have been characterized by single-crystal X-ray diffraction methods and they are isotypic. The structure of Ln{sub 2}YbCuQ{sub 5} consists of one-dimensional {sup 1}{sub {infinity}} [YbCuQ{sub 5}]{sup 6-} ribbons extending along the b axis that are connected by larger Ln{sup 3+} ions. Each ribbon is constructed from two single chains of [YbQ{sub 6}] octahedra with one double chain of [CuQ{sub 5}] trigonal bipyramids in the middle. All three chains connect with each other via edge-sharing. There are two crystallographically unique Ln atoms, one octahedral Yb site, and two disordered Cu positions inside of distorted Q{sub 5} trigonal bipyramids. Both Ln atoms are surrounded by eight Q atoms in bicapped trigonal prisms. The magnetic properties of Ln{sub 2}YbCuQ{sub 5} have been characterized using magnetic susceptibility and heat capacity measurements, while their optical properties have been explored using UV-vis-NIR diffuse reflectance spectroscopy. Cesub 2}YbCuSe{sub 5}, La{sub 2}YbCuS{sub 5}, Ce{sub 2}YbCuS{sub 5}, and Pr{sub 2}YbCuS{sub 5} are Curie-Weiss paramagnets. La{sub 2}YbCuSe{sub 5} and Nd{sub 2}YbCuS{sub 5} show evidence for short-range antiferromagnetic ordering at low temperatures. Sm{sub 2}YbCuS{sub 5} shows magnetic ordering at 5.9 K, followed by negative magnetization at low external fields. The band gaps of La{sub 2}YbCuSe{sub 5}, Ce{sub 2}YbCuSe{sub 5}, La{sub 2}YbCuS{sub 5}, Ce{sub 2}YbCuS{sub 5}, Pr{sub 2}YbCuS{sub 5}, Nd{sub 2}YbCuS{sub 5},and Sm{sub 2}YbCuS{sub 5} are 1.15 eV, 1.05 eV, 1.45 eV, 1.37 eV, 1.25 eV, 1.35 eV, and 1.28 eV respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of argon flow rate on structural and optical properties of transparent Nb{sub 2}O{sub 5} thin films

Transparent niobium pentoxide (Nb{sub 2}O{sub 5}) thin films deposited on glass substrates by RF sputtering at different argon (Ar) flow rate were contrastively studied. Analytical methods such as X-ray fluorescence, Fourier-transform infrared spectroscopy and field emission scanning electron microscope were utilized to investigate the morphological surface and structural properties of Nb{sub 2}O{sub 5} thin films deposited at different Ar flow rate. UV–Vis–NIR and photoluminescence (PL) spectroscopy were used to explore the optical properties of Nb{sub 2}O{sub 5} thin films deposited at different Ar flow rate. The allowed optical band gap (E{sub g}{sup d}) of the Nb{sub 2}O{sub 5} thin films varies from 3.88 to 3.80 eV with increasing Ar flow rate from 30 to 90 sccm. The PL of the Nb{sub 2}O{sub 5} thin films showed strong emission peak around 400 nm. The real values of the refractive index are increase with increasing Ar flow rate. Optical quantities related to the optical constants of Nb{sub 2}O{sub 5} thin films thin films such as single oscillator parameters and third-order nonlinear susceptibility were assessed.

36 MATERIALS SCIENCE↗

Optical properties of vacancies in aluminum oxide (𝛼−Al 2 ⁢O 3 ) from first principles

We employ first-principles calculations based on hybrid density functional theory to investigate the structural and optical properties of the oxygen vacancy (𝑉 O ) and aluminum vacancy (𝑉 Al ) in 𝛼−Al 2 ⁢O 3 , the most stable (corundum) phase of alumina. Our calculations facilitate the identification of experimental excitation and luminescence spectra with specific electronic transitions at the vacancy sites. The absorption line shape for excitation of an electron at 𝑉$^0_O$ to the conduction-band minimum (CBM) is in excellent agreement with the 6.1 eV band detected by optical absorption spectroscopy, and we find that the 5.9 eV absorption band is generated by an internal electron transition at 𝑉$^0_O$. We confirm that the slowly decaying 3.0 eV emission band of the 𝐹 center is due to a triplet-singlet transition at 𝑉$^0_O$. Our calculations also reveal that the 4.8 eV/5.4 eV absorption and 3.8 eV emission bands assigned to the 𝐹 + center are generated by internal transitions at 𝑉$^{+1}_O$. The line shape for the excitation of an electron from 𝑉$^{+1}_O$ to the CBM agrees well with an absorption band at 6.4 eV, while the recombination of an electron with 𝑉$^{+2}_O$ also produces luminescence around 3.8 eV, but with a considerably broader line shape. For Al vacancies, we confirm that the most prevalent configuration in 𝛼−Al 2 ⁢O 3 is a split-vacancy configuration 𝑉 Al,s , and we calculate migration barriers for different directions in the corundum crystal. We predict absorption and emission spectra for the excitation and recombination of an electron localized at 𝑉$^{−3}_{Al}$ and 𝑉$^{−3}_{Al,s}$ sites with the CBM. The line shapes of the two 𝑉 Al configurations overlap and are considerably broader than the spectra corresponding to 𝑉 O .

36 MATERIALS SCIENCE↗

Synthesis, growth, structure, mechanical and optical properties of a new semi-organic 2-methyl imidazolium dihydrogen phosphate single crystal

Highlights: • 2MIDP crystals were grown by slow evaporation solution growth technique. • Single crystal XRD revealed self-assembled supramolecular framework. • Z scan technique is employed for third order nonlinear optical susceptibility. • Structure-property correlation is established. - Abstract: A new semi-organic compound, 2-methyl imidazolium dihydrogen phosphate (2MIDP), was prepared and good quality single crystals of 2MIDP were grown by slow evaporation solution growth technique. Crystal structure elucidated using Single crystal XRD showed that 2MIDP crystallizes in monoclinic system with P2{sub 1}/c space group. FT-IR, UV-Vis-NIR, Fluorescence and FT-NMR spectra confirm the molecular structure of 2MIDP. The UV-Vis-NIR spectra established the suitability of the compound for NLO applications. TG-DSC showed that 2MIDP is thermally stable up to 200 °C. Mechanical characteristics like hardness number (H{sub v}), stiffness constant (C{sub 11}), yield strength (σ{sub v}), fracture toughness (K{sub c}) and brittleness index (B{sub i}) were assessed using Vicker’s microhardness tester. Third order nonlinear optical properties determined from Z-scan measurement using femto and picosecond lasers showed two photon reverse saturable absorption. The enhancement of nonlinear optical properties in femto second laser, revealed the suitability of 2MIDP for optical limiting applications.

36 MATERIALS SCIENCE↗

Investigation on the structural and nonlinear optical properties of Pt doped TiO{sub 2} nanoparticles

Graphical abstract: The open aperture Z-scan traces of Pt doped TiO{sub 2} nanoparticles at different Pt concentrations were carried out at an irradiation wavelength of 532 nm. It was numerically found that, two photon absorption (TPA) type process gives the best fit to the obtained open aperture Z-scan data. The nonlinear transmission was found to be of third order as it fits to a two-photon absorption. The optical limiting performances of nanoparticles were greatly enhanced with increased volume ratio of Pt. Increasing particle size reduced the limiting threshold and enhanced the optical limiting performance. - Highlights: • Pt doped TiO{sub 2} nanoparticles with different concentrations of Pt have been synthesized by sol–gel method. • The average fluorescence lifetime decreases as the volume fraction of Pt dopant increases. • The effects of Pt content on the optical limiting property were investigated by open aperture Z-scan measurements done at 532 nm using 5 ns laser pulses. • The values of the third-order nonlinearities of nanoparticles are interesting from the application point of view which could be used as a potential candidate for the application of nonlinear optical device. - Abstract: Pt doped TiO{sub 2} nanoparticles with different concentrations of Pt were prepared by sol–gel method. X-ray diffraction (XRD) study reveals that the samples have a homogeneous anatase phase tetragonal system and the lattice parameter analysis indicates that Pt ions substitute into the lattice of TiO{sub 2}. The addition of dopant increases the growth of TiO{sub 2} grains, agglomerates them and shifts the absorption band of TiO{sub 2} from ultraviolet to visible region. The incorporation of Pt in TiO{sub 2} is also confirmed by fluorescence quenching and the fluorescence lifetime decreases as the volume fraction of Pt dopant increases. Open aperture Z-scan measurements done at 532 nm using 7 ns laser pulses show nonlinear absorption which arises from an effective two photon absorption process. The nonlinear optical properties are characterized by using fluence dependent transmittance measurements in order to reveal the optical limiting effects. It is found that the optical limiting performances of nanoparticles were greatly enhanced with increased concentration of Pt.

36 MATERIALS SCIENCE↗