Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Open source”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Study of neutral composition of lower thermosphere at Fort Churchill.

On Feb. 4 and 6, 1969, and May 11, 1970, Aerobee rockets carrying neutral mass spectrometers were flown at Fort Churchill, Canada during conditions of low geomagnetic activity. As in earlier flights at White Sands, New Mexico, each rocket carried both 'open' and 'closed' ion source instruments. Vertical profiles of N2, O2, O, Ar, and He were measured. Results obtained were essentially the same as those observed at White Sands except that for the winter flights helium appeared to be in diffusive equilibrium.

Nier, A. O.↗

Apollo-Skylab contamination photography (S226)

Photographs taken on Apollo 16 before, during, and after a water dump were analyzed for residual background brightness, particle dynamics, and time decay of background brightness. No conclusive results were obtained because of the illumination of the windows or window openings by extraneous light sources.

Craven, P. D.↗

Observations of the interstellar gas with the Copernicus satellite

Results are reviewed for Copernicus far-UV measurements of the absorption lines of H I, D I, H2, and heavier elements in the interstellar gas. Column densities along several lines of sight, as estimated from Ly-alpha absorption-line profiles, confirm that wide differences in the gas density are present in various directions. The measurement of interstellar D I implies an open universe unless alternate sources for this nuclide are found. Analysis of reddened stars for which the line of sight passes through one or more interstellar clouds indicates a depletion of several heavy elements in the gas. It is suggested that the depleted elements may be present in grains rather than molecules and that the intercloud medium may consist primarily of H II with a few small H I clouds.

Morton, D. C.↗

ASTP (SA-210) launch vehicle operational flight trajectory dispersion analysis, volume 1

In order to establish realistic deviation limits for the ASTP (SA-210) Launch Vehicle Operational Flight Trajectory, a dispersion analysis was conducted. The nominal trajectory prescribed for this analysis is the ASTP (SA-210) Launch Vehicle 500 Pound Launch Window Opening OT. The error sources considered are those associated with predictions of vehicle characteristics, vehicle systems performance, and flight environment. The nominal vehicle, the boost trajectory simulations, the error sources, the analytic procedures utilized, and the results are discussed. Launch vehicle guidance system inaccuracies were determined from the guidance error analysis. These data are composed of individual error source trajectory parameter dispersion envelopes.

Williams, N. D.↗

Signatures of shock drivers in the solar wind and their dependence on the solar source location

Solar wind and energetic ion observations following 40 interplanetary shocks with well-established solar source locations have been examined in order to determine whether signatures characteristic of the coronal material forming the shock driver are present. The signatures considered include magnetic-field-aligned bidirectional ion flows observed by the ISEE 3 and IMP 8 spacecraft; bidirectional solar wind electron heat fluxes; solar wind plasma proton and electron temperature depressions; low-beta plasma; enhanced, low-variance magnetic fields; and energetic ion depressions. Several shock driver signatures are commonly observed following shocks originating from within about 50 deg of central meridian, and are generally absent for other events. We conclude that shock drivers generally extend up to about 100 deg in longitude, centered on the solar source longitude. Since shocks from central meridian events are not usually associated with all the shock driver signatures examined, the absence of a driver cannot be confirmed from consideration of one of these signatures alone. We also find evidence that a few bidirectional energetic ion and solar wind electron heat flux events following shocks (in particular from far eastern sources) may occur on open field lines outside of shock drivers.

Richardson, I. G.↗

Coronal structures deduced from photospheric magnetic field and He I lambda 10830 observations

The National Solar Observatory synoptic program provides an extensive and unique data base of high-resolution full-disk observations of the line-of-sight photospheric magnetic fields and of the He I lambda 10830 equivalent width. These data have been taken nearly daily for more than 21 years since 1974 and provide the opportunity to investigate the behavior of the magnetic fields in the photosphere and those inferred for the corona spanning on the time scales of a day to that of a solar cycle. The intensity of structures observed in He I lambda 10830 are strongly modulated by overlying coronal radiation; areas with low coronal emission are generally brighter in He I lambda 10830, while areas with high coronal emission are darker. For this reason, He I lambda 10830 was selected in the mid-1970's as way to identify and monitor coronal holes, magnetic fields with an open configuration, and the sources of high-speed solar wind streams. The He I lambda 10830 spectroheliograms also show a wide variety of other structures from small-scale, short-lived dark points (less than 30 arc-sec, hours) to the large-scale, long-lived two 'ribbon' flare events that follow the filament eruptions (1000 arc-sec, days). Such structures provide clues about the connections and changes in the large-scale coronal magnetic fields that are rooted in concentrations of magnetic network and active regions in the photosphere. In this paper, what observations of the photospheric magnetic field and He I lambda 10830 can tell us about the short- and long-term evolution of the coronal magnetic fields will be discussed, focussing on the quiet Sun and coronal holes. These data and what we infer from them will be compared with direct observations of the coronal structure from the Yohkoh Soft X-ray Telescope.

Harvey, Karen L.↗

Annual Sea Level Variability Induced by Changes in Sea Ice Extent and Accumulation on Ice Sheets: An Assessment Based on Remotely Sensed Data

Changes of mean annual net accumulation at the surface on the grounded ice sheets of East Antarctica, West Antarctica, and Greenland in response to variations in sea ice extent are estimated using grid-point values 100 km apart. The data bases are assembled principally by bilinear interpolation of remotely sensed brightness temperature (Nimbus-5 ESMR, Nimbus-7 SMMR), surface temperature (Nimbus-7 THIR), and surface elevation (ERS-1 radar altimeter). These data, complemented by field data where remotely sensed data are not available, are used in multivariate analyses in which mean annual accumulation (derived from firn emissivity) is the dependent variable; the independent variables are latitude, surface elevation, mean annual surface temperature, and mean annual distance to open ocean (as a source of energy and moisture). The last is the shortest distance measured between a grid point and the mean annual position of the 10% sea ice concentration boundary, and is used as an index of changes in sea ice extent as well as of mean concentration. Stepwise correlation analyses indicate that variations in sea ice extent of +/-50 km would lead to changes in accumulation inversely of +/-4% on East Antarctica, +/- 10% on West Antarctica, and +4% on Greenland. These results are compared with those obtained in a previous study using visually interpolated values from contoured compilations of field data; they substantiate the findings for the Antarctic ice sheets (+/-4% on East Antarctica, +/-9% in West Antarctica), and suggest a reduction by one half of the probable change of accumulation on Greenland (from +/-8%). The results also suggest a reduction of the combined contribution to sea level variability to +/- 0.19 mm/a (from +/- 0.22 mm/a).

Zwally, H. J.↗

Ground Demonstration of Planetary Gas Lidar Based on Optical Parametric Amplifier

We report on the development effort of a nanosecond-pulsed optical parametric amplifier (OPA) for remote trace gas measurements for Mars and Earth. The OPA output has high spectral purity and is widely tunable both at near-infrared and mid-infrared wavelengths, with an optical-optica1 conversion efficiency of up to approx 39 %. Using this laser source, we demonstrated open-path measurements of CH4 (3291 nm and 1651 nm), CO2 (1573 nm), H2O (1652 nm), and CO (4764 nm) on the ground. The simplicity, tunability. and power scalability of the OPA make it a strong candidate for general planetary lidar instruments, which will offer important information on the origins of the planet's geology, atmosphere, and potential for biology,

Numata, Kenji↗

A plasma-based non-intrusive point source for acoustic beamforming applications

A laser-generated plasma acoustic point source is used to directly measure the point spread function (PSF) of a microphone phased array. In beamforming analysis of microphone phased array data, the true acoustic field is convolved with the array's PSF. By directly measuring the PSF, corrections to the array analysis can be computed and applied. The acoustic source is measured in an open-jet aeroacoustic facility to evaluate the effects of sampling rate, microphone installation, source shift, reflections, shear layer refraction and model presence. Results show that measurements exhibit behavior consistent with theory with regard to source shift and shear layer refraction. Application of a measured PSF in beamforming analysis shows the process provides an effective in-situ method for array calibration both with and without flow and allows for corrections to incorporate reflections and scattering. The technique improves the agreement of beamforming results with the true spectrum of a known source, especially in the presence of reflections.

phased array↗

An XMM-Newton Study of 9SGR and the Lagoon Nebula

We report preliminary results of an XMM-Newton observation of the 04 V star 9 Sgr (= HD 164794). 9 Sgr is one of a few single OB stars that display a non-thermal radio emission attributed to synchrotron emission by relativistic electrons. Inverse Compton scattering of photospheric UV photons by these relativistic electrons is a priori expected to generate a non-thermal power-law tail in the X-ray spectrum. Our EPIC and RGS spectra of 9 Sgr suggest a more complex situation than expected from this 'simple' theoretical picture. Furthermore, soft-band EPIC images of the region around 9 Sgr reveal a number of point sources inside the Lagoon Nebula (M8). Most of these sources have optical counterparts inside the very young open cluster NGC 6530 and several X-ray sources are associated with low and intermediate mass pre-main sequence stars. Finally, we also detect (probably) diffuse X-ray emission from the Hourglass Region that might reveal a hot bubble blown by the stellar wind of Herschel 36, the ionizing star of the HG region.

Rauw, G.↗

Ion beam generation at the plasma sheet boundary layer by kinetic Alfven waves

A two-dimensional quasi-linear numerical code was developed for studying ion beam generation at the plasma sheet boundary layer by kinetic Alfven waves. The model assumes that the central plasma sheet is the particle source, and that the last magnetic field lines on which kinetic Alfven waves exist and diffusion occurs can be either open or closed. As the possible source for the excitement of the kinetic Alfven waves responsible for ion diffusion, the resonant mode conversion of the surface waves to kinetic Alfven waves is considered. It is shown that, depending on the topology of the magnetic field at the lobe side of the simulation system, i.e., on whether field lines are open or closed, the ion distribution function may or may not reach a steady state.

Moghaddam-Taaheri, E.↗

Portable Intravenous Fluid Production Device For Ground Use Project

Several medical conditions require the administration of intravenous (IV) fluids,but limitations of mass, volume, shelf-life, transportation, and local resources can restrict the availability of these important fluids. Such limitations are expected in long-duration space exploration missions and in remote or austere places on Earth. This design uses regular drinking water that is pumped through two filters to produce, in minutes, sterile, ultrapure water that meets the stringent quality standards of the United States Pharmacopeia for Water for Injection (Total Bacteria, Conductivity, Endo - toxins, Total Organic Carbon). The device weighs 2.2 lb (1 kg) and is 10 in. long, 5 in. wide, and 3 in. high (≈25, 13, and 7.5 cm, respectively) in its storage configuration. This handheld device produces one liter of medical-grade water in 21 minutes. Total production capacity for this innovation is expected to be in the hundreds of liters. The device contains one battery powered electric mini-pump. Alternatively, a manually powered pump can be attached and used. Drinking water enters the device from a source water bag, flows through two filters, and final sterile production water exits into a sealed, medical-grade collection bag. The collection bag contains pre-placed crystalline salts to mix with product water to form isotonic intravenous medical solutions. Alternatively, a hypertonic salt solution can be injected into a filled bag. The filled collection bag is detached from the device and is ready for use or storage. This device currently contains one collection bag, but a manifold of several pre-attached bags or replacement of single collection bags under sterile needle technique is possible for the production of multiple liters. The entire system will be flushed, sealed, and radiation-sterilized. Operation of the device is easy and requires minimal training. Drinking water is placed into the collection bag. Inline stopcock flow valves at the source and collection bags are opened, and the mini-pump is turned on by a switch to begin fluid flow. When the collection bag is completely filled with the medical- grade water, the pump can be turned off. The pump is designed so it cannot pump air, and overfilling of the collection bag with fluid is avoided by placing an equal amount of water in the source bag. Backflow is avoided by inline check valves. The filled collection bag is disconnected from its tubing and is ready for use. The source bag can be refilled for production of multiple liters, or the source bag can be replaced with an input tube that can be placed in a larger potable water source if the device is attended. The device functions in all orientations independent of any gravity fields. In addition to creating IV fluids, the device produces medical-grade water, which can be used for mixing with medications for injection, reconstituting freeze-dried blood products for injection, or for wound hydration or irrigation. Potential worldwide use is expected with medical activities in environments that have limited resources, storage, or resupply such as in military field operations, humanitarian relief efforts, submarines, commercial cruise ships, etc.

Technology Portfolio System↗

LES Simulation of Cooling Airflow of High-Pressure Turbine Using the Source Term Approach

In this study, the Open National Combustion code (OpenNCC) is applied to simulate the airflow inside the high-pressure turbine (HPT) of the energy efficient engine (EEE). The main objective of this study is to validate the proposed methodology of a three-dimensional unsteady calculation (LES) of the HPT with a moving mesh capability to capture a relative motion at the stator and rotor interface. In our previous study, the adiabatic wall assumption was made at all the solid surfaces of HPT (i.e., the cooling airflows were not included.) To relax this assumption, we implement the surface source team approach, in which we impose the source term at a specific area of a cooling airflow exit at the solid surfaces by specifying an injection angle, temperature, turbulent intensity, and mass flowrate of each cooling airflow. The beneficial feature of this approach is that it does not require a mesh for each hole. For the validation of the model, the data for EEE model is obtained from the General Electric (GE) test campaign, and the full scale warm-air rig test condition representing a test point close to the integrated core/low spool design condition is considered.

CFD Hot-streaks↗

Numerical Investigation of the Effect of Cooling Airflow inside High-Pressure Turbine using the Source Term Approach

In this study, the Open National Combustion code (OpenNCC) is applied to simulate the airflow inside the high-pressure turbine (HPT) of the energy efficient engine (EEE). The main objective of this study is to compare the characteristics of the HPT performance obtained by using three different approaches (Case 1: the realistic combustion products are considered at the HPT inlet, but the cooling airflows are not included, Case 2: the working fluid is assumed to be a single gas (i.e., air), and the cooling airflows are considered, Case 3: the cooling airflow and the combustion products at the HPT inlet are included). To mimic the cooling airflows at the HPT surface, we use the surface source team approach, in which we impose the source term at a specific area of a cooling airflow hole at the solid surfaces by specifying an injection angle, temperature, turbulent intensity, and mass flowrate of each cooling airflow. For the validation of the model, the data for the EEE model was obtained from the General Electric (GE) test campaign (RDG10), and the full scale warm-air rig test condition representing a test point close to the integrated core/low spool design condition was considered. This validation test was done using the stationary uniform inflow condition (i.e., the reported total temperature and total pressure). Secondly, we considered the Sea-Level Take-off (SLTO) engine condition and separately performed the combustor simulation to obtain a more realistic time-averaged, spatially-nonuniform HPT inflow condition. This work provides a better understanding the effect of the cooling airflow model with different assumptions on the HPT performance. It is found that using different working gas have a minor effect on the performance metric, however the presence of the cooling airflows significantly affects the HPT performance such as the turbine efficiency.

CFD Hot-streaks↗

IR emission and UV extinction in two open clusters

Recent models of interstellar extinction have shown the importance of understanding both the UV and IR properties of interstellar dust grains. IRAS data have shown variations in 60 and 100 micron emissions presumably due to the presence of IR cirrus, while recent observations in the UV by Fitzpatrick and Massa have identified components in the UV extinction curve which vary in different star regions. A Draine and Anderson model connects these results by proposing that different size variations in interstellar grains would cause distinct changes in both the IR emission and the UV extinction. In order to test this model it is necessary to make observations in well defined locations away from peculiar extinction regions. In the infrared this means looking away from the galactic plane so as to limit non-local sources of IR radiation. Two open clusters that are out of the galactic plane and which contain a number of late B and early A stars suitable for UV extinction studies, and whose IRAS data show variations in the 60/100 micron ratio were studied. Based on the Drain and Anderson model, variations were expected in their UV extinction curves that correlate with the IR cirrus emission.

Hackwell, James A.↗

Polarization of Light by Leaves and Plant Canopies

This talk will focus first on the information contained in the surface-scattered light from leaves, plant canopies and surface waters. This light is in general polarized and depends upon surface roughness. Thus, for example, - The surface reflection from shiny green leaves measured in the specular direction shows no chlorophyll absorption bands, no 'red edge.' - Conversely, the degree of linear polarization of such light displays marked variation with wavelength having local maxima in the chlorophyll absorption bands and an inverted red edge. - Plant canopies with shiny leaves distributed in angle like the area on a sphere, specularly reflect sunlight in the subsolar or specular direction- but also in every other view direction. - Canopies of green plants may appear white not green when viewed obliquely toward the sun. - In a light to moderate wind, the often blindingly bright glitter of sunlight off smooth water surfaces provides a strong, angularly narrow signature reflection characteristic of inundated vegetated areas that are big sources of atmospheric methane, a climatically important greenhouse gas. (Conversely, a blindingly bright glitter-type reflection is uncharacteristic of upland or wind ruffled open water areas that are poor sources of atmospheric methane.) Because some of these results may be 'head scratchers,' it's always important to properly calibrate ones instruments. Indeed, as the second portion of the talk will show, the characteristics of the light measuring instrument, particularly its entrance aperture, may affect the results and should be taken into account during across-instrument data comparisons.

Vanderbilt, V. C.↗

Demonstrations that the Solar Wind is Not Accelerated by Waves or Turbulence

The present work uses observations and theoretical considerations to provide both qualitative and quantitative arguments that hydromagnetic waves, whether turbulent or not, cannot produce the acceleration of the fast solar wind and the related heating of the open solar corona. Waves do exist, and can play a role in the differential heating and acceleration of minor ions, but their amplitudes are not sufficient to power the wind, as demonstrated by extrapolation of magnetic spectra from Helios and Ulysses observations. Dissipation mechanisms invoked to circumvent this conclusion cannot be effective for a variety of reasons. In particular, turbulence does not play a strong role in the corona as shown both by observations of coronal striations and other features, and by theoretical considerations of line-tying to a nonturbulent photosphere, nonlocality of interactions, and the nature of the kinetic dissipation. We consider possible "ways out" of the arguments presented, and suggest that in the absence of wave or turbulent heating and acceleration, the chromosphere and transition region become the natural source, if yet unproven, of open coronal energization through the production of nonthermal particle distributions.

Roberts, D. Aaron↗

Gamma Rays in the Modern Multi-Messenger Astronomy Era

Summary: GW170817 / GRB 170817A is one of the best observed transient and highlights the science impact of multi-messenger observations; Many open questions remain, with increased GW (Gravitational Wave) interferometer sensitivity, there will be more joint detections with GBM (Gamma-ray Burst Monitor), enabling deeper population studies of SGRBs (Short Gamma-Ray Bursts) -Additional distance measures which yield source energetics -Constrain jet structure and opening angle distribution -Cocoon emission from SGRBs -Causes of precursor and extended emission -Rates of SGRBs in the universe with implications for source evolution; Fermi GBM is currently the most prolific short GRB detector -Subthreshold searches are crucial to increasing GBM sensitivity and the detection horizon to weakevents like GRB 170817A; Looking forward to future multimessenger discoveries -Neutron star...Black hole merger, neutrinos, Fast Radio Bursts?

Gamma-Ray Burst↗