Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Neutron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Identifying the Distribution of Al 3+ in LiNi 0.8 Co 0.15 Al 0.05 O 2

The doping of Al into layered Li transition metal (TM) oxide cathode materials, LiTMO 2 , is known to improve the structural and thermal stability, although the origin of the enhanced properties is not well understood. The effect of aluminum doping on layer stabilization has been investigated using a combination of techniques to measure the aluminum distribution in layered LiNi 0.8 Co 0.15 Al 0.05 O 2 (NCA) over multiple length scales with 27 Al and 7 Li MAS NMR, local electrode atom probe (APT) tomography, X-ray and neutron diffraction, DFT, and SQUID magnetic susceptibility measurements. APT ion maps show a homogenous distribution of Ni, Co, Al and O 2 throughout the structure at the single particle level in agreement with the high-temperature phase diagram. 7 Li and 27 Al NMR indicates that the Ni 3+ ions undergo a dynamic Jahn-Teller (JT) distortion. 27 Al NMR spectra indicate that the Al reduces the strain associated with the JT distortion, by preferential electronic ordering of the JT long bonds directed toward the Al 3+ ion. The ability to understand the complex atomic and orbital ordering around Al 3+ demonstrated in the current method will be useful for studying the local environment of Al 3+ in a range of transition metal oxide battery materials.

27Al NMR↗

Transition from the twinning induced plasticity to the γ-ε transformation induced plasticity in a high manganese steel

Neutron-diffraction investigation on the deformation of a Fe-18Mn-3Si-0.6C-0.4Al steel reveals that the twinning is mainly dominant at a stress below 900 MPa, above which the twinning behavior is largely outweighed by phase transformation from the face-centered-cubic (FCC) γ-austenite to the hexagonal-close-packed (HCP) ε-martensite. In the deformed grains, the distribution of ε-martensite is parallel with the twin boundary. Both the well-known {111} γ //{0001} ε relationship and an additional {111} γ //{11–21} ε orientation relation were identified. After the phase transformation, both phases deformed further with the lattice rotating around an axis perpendicular to the tensile direction. Transition from the twinning dominant behavior to the phase transformation induced plasticity effect is explained by the grain orientation dependence of the effective stacking fault energy (ESFE). An asymmetric and inverse relationship between the width of stacking faults (SF) and the ESFE is obtained from the density functional theory (DFT). The tensile stress always increases proportionally with the SF width in the twinning favorable grains and thus a decreasing ESFE. The replacement of twinning activities by phase transformation could be due to both the nucleation site of ε-martensite at the SF of the twin boundary and the decrease of the ESFE in grains which originally favors the twinning.

Materials Science↗

Pressure dependence of the magnetic ground state in CePtSi 2

CePtSi 2 was reported to exhibit an antiferromagnetic order below T*=1.8 K at ambient pressure, a valence state change at ~1.2 GPa, and superconductivity in the range between 1.4 and 2.1 GPa with a maximum transition temperature of 0.14 K [T. Nakano et al., Phys. Rev. B 79, 172507 (2009)]. We have performed polycrystalline and single-crystal neutron diffraction experiments to determine the magnetic structure under ambient and high pressures. We found incommensurate magnetic peaks with a magnetic propagation vector of (0.32,0,0.11) at ambient pressure below T SDW ~ 1.25 K. Those magnetic peaks originate from a spin-density-wave order with the easy axis along the c axis and an averaged ordered moment of 0.45(5) μB , suggesting that there may be an intermediate phase between T* and T SDW . Applying pressures, the magnetic propagation vector shows no change and the magnetic order disappears around 1.0 GPa, which is much lower than the critical pressure for the superconducting phase. The results suggest that other than magnetic fluctuations may play a primary role in the superconducting pairing mechanism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and magnetic phase transitions in CeCu 6 - x T x ( T = Ag , Pd )

The structural and the magnetic properties of CeCu6-xAgx (0≤x≤0.85) and CeCu6-xPdx (0≤x≤0.4) have been studied using neutron diffraction, resonant ultrasound spectroscopy (RUS), x-ray diffraction measurements, and first principles calculations. The structural and magnetic phase diagrams of CeCu6-xAgx and CeCu6-xPdx as a function of Ag/Pd composition are reported. The end member, CeCu6, undergoes a structural phase transition from an orthorhombic (Pnma) to a monoclinic (P21/c) phase at 240 K. In CeCu6-xAgx, the structural phase transition temperature (Ts) decreases linearly with Ag concentration and extrapolates to zero at xS ≈0.1. The structural transition in CeCu6-xPdx remains unperturbed with Pd substitution within the range of our study. The lattice constant b slightly decreases with Ag/Pd doping, whereas a and c increase with an overall increase in the unit cell volume. Both systems, CeCu6-xAgx and CeCu6-xPdx, exhibit a magnetic quantum critical point (QCP), at x≈0.2 and x≈0.05, respectively. Near the QCP, long range antiferromagnetic ordering takes place at an incommensurate wave vector (δ10 δ2), where δ1~0.62,δ2~0.25,x=0.125 for CeCu6-xPdx and δ1~0.64,δ2~0.3,x=0.3 for CeCu6-xAgx. The magnetic structure consists of an amplitude modulation of the Ce moments which are aligned along the c axis of the orthorhombic unit cell.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and Crystal Chemical Properties of Alkali Rare-earth Double Phosphates

When appropriately activated, alkali rare-earth double phosphates of the form: M 3 RE(PO 4 ) 2 (where M denotes an alkali metal and RE represents either a rare-earth element or Y or Sc) are of interest for use as inorganic scintillators for radiation detection at relatively long optical emission wavelengths. These compounds exhibit layered crystal structures whose symmetry properties depend on the relative sizes of the rare-earth and alkali-metal cations. Single-crystal X-ray and powder neutron diffraction methods were used here to refine the structures of the series of rare-earth double phosphate compounds: K 3 RE(PO 4 ) 2 with RE = Lu, Er, Ho, Dy, Gd, Nd, Ce, plus Y and Sc - as well as the compounds: A 3 Lu(PO 4 ) 2 , with A = Rb, and Cs. The double phosphate K 3 Lu(PO 4 ) 2 was reported and structurally refined previously. This material had a hexagonal unit cell at room temperature with the Lu ion six-fold coordinated with oxygen atoms of the surrounding phosphate groups. Additionally two lower-temperature phases were observed for K 3 Lu(PO 4 ) 2 . The first phase transition to a monoclinic P21/m phase occurred at ~230 K, and the Lu ion retained its six-fold coordination. The second K 3 Lu(PO 4 ) 2 phase transition occurred at ~130 K. The P21/m space group symmetry was retained, however, one of the phosphate groups rotated to increase the oxygen coordination number of Lu from six to seven. This structure then became isostructural with the room-temperature form of the compound K 3 Yb(PO 4 ) 2 reported here that also exhibits an additional high-temperature phase which occurs at T = 120 °C with a transformation to hexagonal P-3 space group symmetry and a Yb-ion coordination number reduction from seven to six. This latter result was confirmed using EXAFS. The single-crystal growth methods structural systematics, and thermal expansion properties of the present series of alkali rare-earth double phosphates, as determined by X-ray and neutron diffraction methods, are treated here.

36 MATERIALS SCIENCE↗

Near room temperature magnetodielectric consequence in (Li, Ti) doped NiO ceramic

In the quest for high-k dielectrics with decent magnetodielectric (MD) response, ball-milled processed (Li, Ti) doped NiO ceramics have been evaluated by various experimental techniques. Magnetic properties in these ceramics manifest with a pronounced anomaly appearing at ∼260 K, suggesting ferrimagnetic phase (related to cluster magnetism) and co-existence with a glassy-like antiferromagnetic phase at ∼7 K. Room temperature neutron diffraction pattern shows the existence of short-range magnetic correlations. In the magnetically ordered state below 250 K, the magnetic structure is found to be phase coexistence of G-type antiferromagnet and ferrimagnet. Impedance spectroscopy measurements over a wide temperature range can be perfectly described with appropriate microstructural model (internal barrier layer capacitor), based on domain and domain boundary relaxations, justifying the enhancement of the dielectric response. The low-temperature (T < 100 K) dielectric relaxation is polaronic in nature, associated with the charge ordering of a mixed valence states of Ti ions (co-existence of Ti{sup 3+} and Ti{sup 4+}). Finally, our investigations in external magnetic fields up to 15 T reveal the occurrence of negative MD effect near room temperature. This intriguing intrinsic feature has been understood by the mechanism of charge-hopping-mediated MD effects.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantitative investigation of the short-range magnetic correlations in the candidate quantum spin liquid NaYbO 2

Here, we present a neutron diffraction study of NaYbO 2 , a candidate quantum spin-liquid (QSL) compound hosting a geometrically frustrated triangular lattice of magnetic Yb 3+ ions. We observe diffuse magnetic scattering that persists to at least 20 K, demonstrating the presence of short-range magnetic correlations in this system up to a relatively high-energy scale. Using a reverse Monte Carlo and magnetic pair distribution function analysis, we confirm the predominant antiferromagnetic nature of these correlations and show that the diffuse scattering data can be well described by noninteracting layers of Heisenberg or XY spins on the triangular lattice. We rule out Ising spins and short-range-ordered stripe or 120° phases as candidate ground states of NaYbO 2 . These results are consistent with a possible QSL ground state in NaYbO 2 and showcase the benefit of a combined reciprocal- and real-space analysis of materials with short-range magnetic correlations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrogen Bonding Analysis of Structural Transition-Induced Symmetry Breaking and Spin Splitting in a Hybrid Perovskite Employing a Synergistic Diffraction-DFT Approach

Two-dimensional (2D) hybrid organic–inorganic perovskites (HOIPs) offer an outstanding opportunity for spin-related technologies owing in part to their tunable structural symmetry breaking and distortions driven by organic–inorganic hydrogen (H) bonds. However, understanding how H-bonds tailor inorganic symmetry and distortions and therefore enhance spin splitting for more effective spin manipulation remains imprecise due to challenges in measuring H atom positions using X-ray diffraction. Here, we report a thermally induced structural transition (at ~209 K) for a 2D HOIP, (2-BrPEA) 2 PbI 4 [2-BrPEA = 2-(2-bromophenyl)ethylammonium], which induces inversion asymmetry and a strong spin splitting (ΔE > 30 meV). While X-ray diffraction generally establishes heavy atom coordinates, we utilize neutron diffraction for accurate H atom position determination, demonstrating that the structural transition-induced rearrangement of H-bonds with distinct bond strengths asymmetrically shifts associated iodine atom positions. Further, consequences of this shift include an increased structural asymmetry, an enhanced difference between adjacent interoctahedra distortions (i.e., Pb–I–Pb bond angles), and therefore significant spin splitting. We further show that H-only density-functional theory (DFT) relaxation of the X-ray structure shifts H atoms to positions that are consistent with the neutron experimental data, validating a convenient pathway to more generally improve upon HOIP H-bonding analyses derived from quicker/less-expensive X-ray data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Correlation between crystallographic superstructure and magnetic structures in finite magnetic fields: A neutron study on a single crystal of Ho2PdSi3

We present results of neutron diffraction experiments on a Ho2PdSi3 single crystal in the magnetically ordered state at T = 1.5 K for magnetic fields applied in the easy (0, 0, L) direction. Moderate fields of less than 0.8 T are sufficient to wipe out the antiferromagnetic order in the basal plane of the AlB2-type hexagonal lattice structure. Concurrently strong magnetic reflections along the (0, 0, L) direction develop with increasing fields that are closely related to the nuclear superstructure reflections found in the single crystal at all temperatures. The field dependence of the intensity of the these reflections is rather unusual: after a maximum at 0.6 T and a shallow minimum at 2 T a further increase of intensity for fields up to 5 T is observed. A phase transition into a field induced, saturated ferromagnetic state is expected only at very high fields (> 13 T) as inferred from magnetization data. For the origin of the high field magnetic structure two models are proposed and the corresponding model calculations are compared to our experimental results. Furthermore, the experimental data in low fields (< 0.8 T) are used to clarify the hitherto unsolved zero-field magnetic structure of Ho2PdSi3. The relevance of our findings with respect to other members of the R2PdSi3 series (R = Tb, Er, Tm and others) is emphasized.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Synthesis and Single Crystals of Refractory Oxides of Lanthanides and Thorium

At the completion of this program, we can report that we developed a considerable degree of technical improvements in our ability to perform hydrothermal reactions at high temperatures and pressures. We can now routinely perform reactions at 700-750°C and 200 MPa. Currently we are in the process of exploiting this new technology synthesizing a range of exotic new materials investigating relatively poorly understood materials. Our initial efforts focused on the chemistry of rare earth oxides with tetravalent and pentavalent oxides. We recently published a study of the lanthanides with Nb 5+ and Ta 5+ ions, where we grew oxides such as RENdO 4 and RETaO 4 as high quality single crystals. These compounds were targeted as potential hosts for luminescent and scintillation materials, particularly given that they are among the densest oxide hosts and hence have good potential as absorbers for high energy radiation like X-rays and gamma rays. We also isolated a range of unusual new rare earth tantalates with very complex structures. indicating that the chemistry is very sensitive to conditions. We performed some fairly comprehensive examinations of the solid-state chemistry of rare earth ions with various tetravalent metal ions especially Si 4+ , Ge 4+ , Sn 4+ and Ti 4+ . Given the potential role of rare earth silicates in immobilizing radioactive waste elements in long-term storage, and the similarity of our hydrothermal fluids with known geological conditions, this chemistry continues to be relevant. We prepared an extensive series of new lanthanide germanates (e.g. RE 13 Ge 6 O 31 (OH), BaRE 10 (GeO 4 ) 4 O 8 ). and found that there is there is almost no overlap between the chemistry of the rare earth silicates. Stannic oxide (SnO 2 ) is much more refractory and requires higher temperatures and of mineralizer concentrations. One significant result is the growth of RE 2 Sn 2 O 7 pyrochlore single crystals. These are of interest because the rare earth stannate pyrochlores are known to display a wide range of magnetic frustration such as spin ice behavior. We grew high quality single crystals of rare earth germanate and stannate pyrochlores and this led to a collaboration with Professor Kate Ross at Colorado State. Preliminary measurements, indicate that the crystals contain no detectable defects or site disorder. Initial neutron diffraction on single crystals was performed at Oak Ridge, and more detailed experiments involving the Ross group are underway at both NIST and ORNL. This particular chemistry has turned out to be the most potentially significant work on this project and the collaborative effort with Prof. Ross is the topic of a DoE renewal project on quantum materials. Our initial foray into the hydrothermal chemistry of rare earth titanates has also been very promising and a range of cubic and polar ferroic phases of the light rare earths RE 2 Ti 2 O 7 (RE = La - Pr) in the P2 1 phase. We also discovered an interesting new phase Ce 2 Ti 4 O 11 that can have implications in heavy metal immobilization and storage. along with a series of new rare earth titanates (La 5 Ti 4 O 15 (OH) Sm 3 TiO 5 (OH) 3 and Lu 5 Ti 2 O 11 (OH) with exceptionally complex structures. One interesting sidelight has been high temperature hydrothermal chemistry terbium, including the growth of large crystals of TbO(OH). This is not a new compound but it is the first time it has been grown as large single crystals. The Tb atom density is almost as high as that in Tb 2 O 3 and has a very high Verdet constant (ca. 70), making it a very attractive candidate as a Faraday rotator. Unfortunately it is not in a cubic structure but he material is hard, stable, pure and inexpensive, so should still be an attractive Faraday oscillator. We recently received a patent on this material. We also synthesized K 2 Tb(Ge 2 O 7 ) containing stable octahedral Tb 4+ ions, which appears to be the first example of a well-characterized Tb 4+ complex. Given that Tb 4+ has been proposed as a benign surrogate for more treacherous tetravalent ions such as Cf 4+ and Bk 4+ , we think that Tb 4+ silicates can be a particularly useful study for actinide immobilization and related work. We also began reaction studies with rare earths and both ReO 2 and RuO 2 . These resulted in large single crystals of species like RE 5 Ru 2 O 12 , RE 4 Re 2 O 11 , REReO 4 and RE 2 ReO 5 . Several of these samples have already been sent to ORNL for magnetic and neutron diffraction studies.

36 MATERIALS SCIENCE↗

Glass structure and crystallization in boro-alumino-silicate glasses containing rare earth and transition metal cations: a US-UK collaborative program

Nuclear wastes generated from reprocessing of used nuclear fuel tend to contain a large fraction of rare earth (RE, e.g., Nd3+), transition (TM, e.g., Mo6+, Zr4+), alkali (A, e.g., Cs+), and alkaline earth cations (AE, e.g., Ba2+, Sr2+). Various strategies have been considered for immobilizing such waste streams, varying from nominally crystal-free glass to glass-ceramic to multi-phase ceramic waste forms. For glass and glass-ceramic waste forms, the added glass-forming system is generally alkali-alkaline earth-aluminoborosilicate (i.e., Na-Ca-Al-B-Si oxide). In a US-UK collaborative project, summarized here, we investigated the glass structure and crystallization dependence on compositional changes in simulated nuclear waste glasses and glass-ceramics. Compositions ranged in complexity from five – to – eight oxides. Specifically, the roles of Mo and rare earths are investigated, since a proposed glass-ceramic waste form contains crystalline phases such as powellite [(AE,A,RE)MoO4] and oxyapatite [(RE,AE,A)10Si6O26], and the precipitation of molybdenum phases is known to be affected by the rare earth concentration in the glass. Additionally, the effects of other chemical additions have been systematically investigated, including Zr, Ru, P, and Ti. A series of studies were also undertaken to ascertain the effect of the RE size on glass structure and on partitioning to crystal phases, investigating similarities and differences in glasses containing single RE oxides of Sc, Y, La, Ce, Nd, Sm, Er, Yb, or Lu. Finally, the effect of charge compensation was investigated by considering not only the commonly assessed peralkaline glass but also metaluminous and peraluminous compositions. Glass structure and crystallization studies were conducted by spectroscopic methods (i.e., Raman, X-ray absorption, nuclear magnetic resonance (NMR), optical absorption, photoluminescence, photoluminescence excitation, X-ray photoelectron spectroscopy), microscopy (i.e., scanning electron microscopy, transmission electron microscopy, electron probe microanalysis), scattering (i.e., X-ray and neutron diffraction, small angle measurements), and physical characterization (i.e., differential thermal analysis, liquidus, viscosity, density). This paper will give an overview of the research program and some example unpublished results on glass-ceramic crystallization kinetics, microstructure, and Raman spectra, as well as some examples of the effects of rare earths on the absorption, luminescence, and NMR spectra of starting glasses. The formal collaboration described here has resulted in the generation of a large number of results, some of which are still in the process of being published as separate studies.

McCloy, John S.↗

Apatite metaprism twist angle ({phi}) as a tool for crystallochemical diagnosis

[A{sup I}]{sub 4}[A{sup II}]{sub 6}(BO{sub 4}){sub 6}X{sub 2} apatites can flexibly accommodate numerous cationic, metalloid and anionic substitutions. Using a combination of new refinements and published structures, this paper reviews correlations between substituent type and framework adaptation through adjustment of the A{sup I}O{sub 6} metaprism twist angle, {phi}. These systematics are illustrated through powder neutron diffraction refinement of the crystal chemistry of A{sub 10}(PO{sub 4}){sub 6}F{sub 2} (A=Ca, Sr) fluorapatites. Variations in {phi} reflect changes in the relative size of the A{sup I}{sub 4}(BO{sub 4}){sub 6} framework and A{sup II}{sub 6}X{sub 2} tunnel content and can be used to quantitatively assess the reliability of A{sup I}/A{sup II} cation partitioning coefficients determined by Rietveld analysis. In the simplest cases of bi-ionic substitution, the metaprism twist systematics conform to three principle trends (i) For A-type divalent substitution, the larger A{sup 2+} species preferentially enters the channel before partitioning to the framework. This leads to parabolic modification in {phi} across the compositional series; (ii) For B-type pentavalent compounds, the {phi} variation will be linear in accord with the relative B{sup 5+} ionic size; and (iii) For X-type substitution of halide anions, {phi} will be reduced as the average size increases. Departures from these trends may indicate polymorphism, compositional anomalies, A{sup I}/A{sup II} order disequilibrium, or poor structure refinement, and may be extended to chemically complex apatites with simultaneous substitutions over the A, B and X sites. - Graphical abstract: [A{sup I}]{sub 4}[A{sup II}]{sub 6}(BO{sub 4}){sub 6}X{sub 2} apatites can flexibly accommodate numerous cationic, metalloid and anionic substitutions. Using a combination of new refinements and published structures, this paper reviews correlations between substituent type and framework adaptation through adjustment of the A{sup I}O{sub 6} metaprism twist angle, {phi}. Highlights: > We use new refinements and published structures to understand adjustment of apatite A{sup I}O{sub 6} metaprism twist angle, {phi} (c.f. [A{sup I}]{sub 4}[A{sup II}]{sub 6}(BO{sub 4}){sub 6}X{sub 2}). > For A-type divalent substitution, the larger A{sup 2+} species preferentially enters the channel before partitioning to the framework; hence parabolic modification in {phi}. > For B-type pentavalent compounds, the {phi} variation will be linear in accord with the relative B{sup 5+} ionic size. > For X-type substitution of halide anions, {phi} will be reduced as the average size increases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Neutron residual stress measurement and numerical modeling in a curved thin-walled structure by laser powder bed fusion additive manufacturing

Severe residual stresses in metal parts made by laser powder bed fusion additive manufacturing processes (LPBFAM) can cause both distortion and cracking during the fabrication processes. Limited data is currently available for both iterating through process conditions and design, and in particular, for validating numerical models to accelerate process certification. In this work, residual stresses of a curved thin-walled structure, made of Ni-based superalloy Inconel 625™ and fabricated by LPBFAM, were resolved by neutron diffraction without measuring the stress-free lattices along both the build and the transverse directions. The stresses of the entire part during fabrication and after cooling down were predicted by a simplified layer-by-layer finite element based numerical model. The simulated and measured stresses were found in good quantitative agreement. The validated simplified simulation methodology will allow to assess residual stresses in more complex structures and to significantly reduce manufacturing cycle time.

36 MATERIALS SCIENCE↗