Results for “Nature” — Page 52

NASA NTRS2017

GES DISC Datalist Enables Easy Data Selection For Natural Phenomena Studies

In order to investigate and assess natural hazards such as tropical storms, winter storms, volcanic eruptions, floods, and drought in a timely manner, the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) has been developing an efficient data search and access service. Called "Datalist," this service enables users to acquire their data of interest "all at once," with minimum effort. A Datalist is a virtual collection of predefined or user-defined data variables from one or more archived data sets. Datalists are more than just data. Datalists effectively provide users with a sophisticated integrated data and services package, including metadata, citation, documentation, visualization, and data-specific services (e.g., subset and OPeNDAP), all available from one-stop shopping. The predefined Datalists, created by the experienced GES DISC science support team, should save a significant amount of time that users would otherwise have to spend. The Datalist service is an extension of the new GES DISC website, which is completely data-driven. A Datalist, also known as "data bundle," is treated just as any other data set. Being a virtual collection, a Datalist requires no extra storage space.

natural hazards↗

NASA NTRS2021

Assessment and Improvement of RANS-based Transition Models based on Experimental Data of the Common Research Model with Natural Laminar Flow

Transition models based on auxiliary transport equations augmenting the Reynolds-averaged Navier-Stokes (RANS) framework often rely upon the correlations that were derived from a limited number of low-speed experiments and do not account for all of the transition mechanisms and/or their variation with the significant flow parameters. Available data from a recent experiment in the National Transonic Facility at the NASA Langley Research Center are used to assess the current transition modeling capability in NASA's OVERFLOW 2.2o code for a swept wing configuration at transonic cruise conditions. Specifically, the OVERFLOW solutions are used together with detailed stability analysis of the boundary layer flow over the new Common Research Model with Natural Laminar Flow (CRM-NLF) to evaluate the accuracy and the robustness of the transport-equation-based transition models, with the goal of proposing improvements that would help to strengthen the physical basis of these models for the important class of flows involving the combined effects of crossflow and flow compressibility. Results highlight the significant underprediction of the laminar flow extent within the inboard region of the wing, wherein the onset of transition may be attributed to a gradual amplification of Tollmien-Schlichting instabilities.

Boundary layer transition↗

NASA NTRSDate not supplied

Natural Language Processing Methods for Air Traffic Management Text and Speech Data

This presentation discusses two efforts of the NARI AI/ML Intern team during the Fall 2021 OSTEM Internship term. For Letters of Agreement (LoA), we have studied how LoAs are structured and explored the question ‘What is an LoA constraint?’ To do this, our approach is data-driven, iterative, and assisted by machine learning when available. In this presentation, we will walk through our tasks of manually scanning through documents, performing a preliminary entity labelling task, and our unsupervised analysis on LoA procedures sections. After this research phase, we define the smallest constraint unit in an LoA, and start to perform entity extraction. Looking towards constraint extraction, we are also exploring the use of a one-class support vector machine (OneClassSVM) model to identify patterns within the data. The second effort of our team this term is focused on Air Traffic Control System Command Center (ATCSCC) advisory meetings, and the subsequent advisory documents that get published from their content. These advisory documents are important to give readily accessible summaries of daily operations, so that data centers, airline officials, and other stakeholders can easily understand the context of these meetings in real time. In applying machine learning to this scenario, two natural language processing tasks are used. First is developing machine learning models to convert the meeting speech data into text. With this text, use of extractive and abstractive text summarization models are used to automatically generate preliminary versions of the advisory documents.

Natural Language Processing↗

NASA NTRS2022

Natural Gas/Oxygen Burner Rig at The NASA Glenn Materials Research Laboratory

This technical memorandum describes the development of a new natural gas/oxygen (NG/O2) fueled burner rig to be used for high-temperature environmental durability studies of advanced materials and components at atmospheric pressure. The burner simulates the high-temperature, high-heat flux, and high-velocity thermal environments encountered in aerospace applications. It will be used to study environmental effects such as water vapor interactions relevant to advanced gas turbine engine materials such as ceramic matrix composites with protective environmental barrier coatings. The highest sample temperature achieved to date in a study of the oxidation and recession of monolithic silicon carbide is 3000 °F.

Burner Rig↗

NASA NTRS2022

Natural Language Understanding and Extraction of Flight Constraints Recorded in Letters of Agreement

This paper presents an automated information extraction and inference technique using natural language processing for extracting flight operational procedures and constraints embedded in heritage air traffic management documents. The extracted flight constraints can be digitized and fit into existing airspace information exchange models such as the Aeronautical Information Exchange Model (AIXM). This approach offers a digitized solution to disseminate airspace operating conditions to diverse air users and stakeholders in the National Airspace System (NAS). Furthermore, the digitized flight procedures can provide operational flexibility for emerging advanced air mobility providers and reduce traffic controller workload while maintaining current safety standards. To demonstrate this process, 1,972 Letters of Agreement (LOAs) have been selected for processing, named entity extraction, constraint identification and extraction. This dataset is derived from a subset of documents related to Air Route Traffic Control Centers (ARTCC) operations. We experimented with various traditional information extraction techniques, state-of-the-art machine learning and deep learning models to perform named entity recognition and pattern recognition on our dataset. We present the results from our experiments and demonstrate 99.0% F-1 score for named entity recognition, and a 96.6% accuracy for our entire workflow up to named entity recognition. We also discuss constraint definitions using generic patterned templates and extensions to this work in applying entity linking to digitally extracting relevant constraints.

Natural Language Processing↗

NASA NTRSDate not supplied

Natural Language Understanding and Extraction of Flight Constraints Recorded in Letters of Agreement

This paper presents an automated information extraction and inference technique using natural language processing for extracting flight operational procedures and constraints embedded in heritage air traffic management documents. The extracted flight constraints can be digitized and fit into existing airspace information exchange models such as the Aeronautical Information Exchange Model (AIXM). This approach offers a digitized solution to disseminate airspace operating conditions to diverse air users and stakeholders in the National Airspace System (NAS). Furthermore, the digitized flight procedures can provide operational flexibility for emerging advanced air mobility providers and reduce traffic controller workload while maintaining current safety standards. To demonstrate this process, 1,972 Letters of Agreement (LOAs) have been selected for processing, named entity extraction, constraint identification and extraction. This dataset is derived from a subset of documents related to Air Route Traffic Control Centers (ARTCC) operations. We experimented with various traditional information extraction techniques, state-of-the-art machine learning and deep learning models to perform named entity recognition and pattern recognition on our dataset. We present the results from our experiments and demonstrate 99.0% F-1 score for named entity recognition, and a 96.6% accuracy for our entire workflow up to named entity recognition. We also discuss constraint definitions using generic patterned templates and extensions to this work in applying entity linking to digitally extracting relevant constraints.

Natural Language Processing↗

NASA NTRS2022

Design and Experimental Results for a Low-Speed, Flapped, Slotted, Natural-Laminar-Flow Airfoil

A 12.91-percent-thick, flapped, slotted, natural-laminar-flow (SNLF) airfoil, the S702, intended for a low-speed, fixed-wing aircraft has been designed and analyzed theoretically and verified experimentally in The Pennsylvania State University Low-Speed, Low- Turbulence Wind Tunnel. The two primary objectives of high maximum lift, insensitive to roughness, and low profile drag have been achieved. The airfoil exhibits a sharp stall that is less abrupt than the stalls of earlier SNLF airfoils, which meets the design objective. The constraint on the pitching moment has been satisfied. Comparisons of the theoretical and experimental results show reasonably good agreement overall, given the complexity of the configuration.

slotted airfoil↗

NASA NTRSDate not supplied

Progress Towards the Design of a Natural Laminar Flow Wing for a Low-Boom Concept using CDISC

The X-59 is being developed to evaluate the ability to reduce sonic boom loudness to acceptable levels, with the ultimate goal of enabling supersonic flight overland. If successful, one of the future research challenges will be focused on reducing fuel burn. In this paper, Natural Laminar Flow (NLF) is proposed as a technology to decrease fuel burn for a low-boom configuration. This will require an evaluation of the compatibility of NLF wings for a low-boom configuration. As a first step towards this goal, the CATNLF method was employed using the CDISC design module to perform NLF design on an isolated wing from a low-boom configuration. The results show that the NLF wing features laminar flow over 46% of the wing upper surface, providing a potential 8.3 drag count reduction relative to the design with no laminar flow. Off-design analyses were additionally performed to evaluate the performance of the NLF wing for changes in angle of attack and Mach number. The results showed that the NLF wing offers a performance benefit over the entire range of off-design conditions considered, with most of the laminar flow maintained for near cruise conditions. Future work will consider the full configuration, which will enable an assessment of the impact of the NLF wing design on sonic boom loudness. Additionally, attachment line transition will be addressed, which was predicted to result in a loss of laminar flow on the inboard 50% span for this work. Finally, future research will focus on developing a method for effectively choosing the frequency-beta pairs used for the stability analysis to improve transition prediction and provide a more accurate estimate of the performance benefit.

Supersonic↗

NASA NTRSDate not supplied

Progress Towards the Design of a Natural Laminar Flow Wing for a Low-Boom Concept Using CDISC

The X-59 is being developed to evaluate the ability to reduce boom loudness to acceptable levels, with the ultimate goal of enabling supersonic flight overland. If successful, one of the future research challenges will be focused on reducing fuel burn. In this paper, Natural Laminar Flow (NLF) is proposed as a technology to decrease fuel burn for a low-boom configuration. This will require an evaluation of the compatibility of NLF wings for a low-boom configuration. As a first step towards this goal, the CATNLF method was employed using the CDISC design module to perform NLF design on an isolated wing from a low-boom configuration. The results show that the NLF wing features laminar flow over 46\% of the wing upper surface, providing a potential 8.3 drag count reduction relative to the design with no laminar flow. Off-design analyses were additionally performed to evaluate the performance of the NLF wing for changes in angle of attack and Mach number. The results showed that the NLF wing offers a performance benefit over the entire range of off-design conditions considered, with the majority of the laminar flow maintained for near cruise conditions. Future work will consider the full configuration, which will enable an assessment of the impact of the NLF wing design on sonic boom loudness. Additionally, attachment line transition will be addressed, which was predicted to result in a loss of laminar flow on the inboard 50\% span for this work. Finally, future research will focus on developing a method for effectively choosing the frequency-beta pairs used for the stability analysis to improve transition prediction and provide a more accurate estimate of the performance benefit.

Supersonic↗

NASA NTRSDate not supplied

Aerodynamic Design Optimization for Natural Laminar Flow Airfoils

Natural laminar flow technology is a passive laminar flow control (LFC) strategy that seeks to delay the onset of boundary-layer transition (BLT) through shape optimization to reduce the drag of the aerodynamic vehicle. Adjoint-based design optimization for LFC is proposed in an integrated multidisciplinary framework, which includes the computational fluid dynamics (CFD), geometry and grid deformation, and linear stability analysis (LSA) for transition prediction. In particular, the BLT location is predicted using the dual N-factor method that is based on a linear stability theory (LST) eigenvalue problem. The dual N-factor criterion accounts for the amplification of planar Tollmien-Schlichting (TS) and stationary crossflow (CF) boundary-layer instabilities to predict the transition location in three-dimensional boundary-layer flows. The adjoint-based shape optimization procedure is based on an iteratively coupled CFD and LSA methodology to converge the transition location and flow solutions, as well as to calculate the sensitivities of the aerodynamic metrics of interest with respect to the flow and shape design parameters. The RAE 2822 airfoil at 0 and 30 degrees yaw angles, an angle of attack of 0.72 degrees, and subsonic conditions (M∞ = 0.19, Rec = 5.6 × 106 ) are used as baseline configurations for design optimization. The angle of attack and the vertical displacement of free-form-deformation control points are used as design variables to reduce the drag coefficient while reaching a specified lift coefficient. The optimized unswept airfoil designs achieve a 30% drag reduction accompanied by a downstream shift of the transition locations over both suction and pressure sides of the airfoil. The initial design iterations for the swept case also show a favorable trend in the drag reduction with transition delay over both sides.

Transition↗

NASA NTRS2024

Assessing Effects of Climate and Technology Uncertainties in Large Natural Resource Allocation Problems

The productivity of the world's natural resources is critically dependent on a variety of highly uncertain factors, which obscure individual investors and governments that seek to make long-term, sometimes irreversible, investments in their exploration and utilization. These dynamic considerations are poorly represented in disaggregated resource models, as incorporating uncertainty into large-dimensional problems presents a challenging computational task. In this paper, we apply the SCEQ algorithm (Cai and Judd, 2023) to solve a large-scale dynamic stochastic global land resource use problem with stochastic crop yields due to adverse climate impacts and limits on further technological progress. For the same model parameters and bounded shocks, the range of land conversion is considerably smaller for the dynamic stochastic model than for deterministic scenario analysis.

numerical methods↗

NASA NTRS2026

Manufacturing and Scale-Up of Natural Fiber Composite eVTOL Propeller Skin and C-Channel

This report presents the manufacturing and scale-up of natural fiber composites for aerospace applications, conducted within NASA’s Convergent Aeronautics Solutions portfolio to advance aircraft capabilities and efficiency. The effort focused on the development and demonstration of two proof-of-concept articles, an Electric Vertical Take-off and Landing (eVTOL) propeller skin and a C-channel, produced through an iterative design and process optimization approach. Best practices and guidance on addressing key challenges with bio-based composite materials and manufacturing is provided. Ideally suited for non-load-bearing structural components, these emerging materials offer potential for weight reduction, vibration damping, noise mitigation, interference-free communication, and cost savings, without compromising the performance of safety-critical primary structures.

Natural fibers↗

NASA NTRSDate not supplied

Natural Fiber Simulations and Analysis for Composites

As the U.S. government and the aviation industry strive to achieve net-zero carbon emissions by 2050, the Sustainable Manufacturing of Aircraft (SUMAC) project, supported by the Convergent Aeronautics Solutions (CAS) program of the National Aeronautics and Space Administration (NASA), aims to develop sustainably derived thermoplastic composites and manufacturing technologies for future aviation. A multidisciplinary team of experts drives this initiative through a collective effort. The team’s key focus areas are sustainably derived thermoplastic resins, natural fiber reinforcement, composite manufacturing, structural health monitoring, computational materials modeling, and systems analysis. This presentation will give an overview of the SUMAC project. Fiber-scale microscopy analysis characterized fiber cross sections finding that hemp and flax fibers are very deformable and non-circular (circularities of 0.2 were observed), and diameters range from submicron to 20 μm. Fiber shapes range from flattened, with aspect ratios Rlong/Rshort up to 5, to round, Rlong/Rshort =1. And Fiber core perimeters, which likely drives deformability, were calculated Pcore=7 μm. Explicit-fiber yarn simulations, parameterized from single-fiber measurements, resolved and identified slack as a cause for yarn strain-hardening tensile behavior. The bonded network model of PLA, PHA and PA11 resins captures tensile behavior, and can model an infused weave. Computational models of the weave unit cells matched the pattern (including plain, twill and triaxial braid), yarn ply (1to 2), and yarn twist from optical microscopy.

thermoplastic↗

NASA NTRSDate not supplied

Natural Fiber Simulations and Analysis for Composites

As the U.S. government and the aviation industry strive to achieve net-zero carbon emissions by 2050, the Sustainable Manufacturing of Aircraft (SUMAC) project, supported by the Convergent Aeronautics Solutions (CAS) program of the National Aeronautics and Space Administration (NASA), aims to develop sustainably derived thermoplastic composites and manufacturing technologies for future aviation. A multidisciplinary team of experts drives this initiative through a collective effort. The team’s key focus areas are sustainably derived thermoplastic resins, natural fiber reinforcement, composite manufacturing, structural health monitoring, computational materials modeling, and systems analysis. This presentation will give an overview of the SUMAC project. Fiber-scale microscopy analysis characterized fiber cross sections finding that hemp and flax fibers are very deformable and non-circular (circularities of 0.2 were observed), and diameters range from submicron to 20 μm. Fiber shapes range from flattened, with aspect ratios Rlong/Rshort up to 5, to round, Rlong/Rshort =1. And Fiber core perimeters, which likely drives deformability, were calculated Pcore=7 μm. Explicit-fiber yarn simulations, parameterized from single-fiber measurements, resolved and identified slack as a cause for yarn strain-hardening tensile behavior. The bonded network model of PLA, PHA and PA11 resins captures tensile behavior, and can model an infused weave. Computational models of the weave unit cells matched the pattern (including plain, twill and triaxial braid), yarn ply (1to 2), and yarn twist from optical microscopy.

thermoplastic↗

DOE OSTI2020

Superlubricious carbon films derived from natural gas

A nanocomposite coating that in turn extract self-replenishing (or -healing), superlubricious carbon film directly from natural gas or hydrocarbon gas in mechanical systems. The coating deposits on sealing and sliding surfaces reducing friction and wear. The result is a reduction in inefficiency, machine breakdown, and adverse environmental impact.

03 NATURAL GAS↗

DOE OSTI2020

Production of liquids and reduced sulfur gaseous products from sour natural gas

Aspects of the invention are associated with the discovery of approaches for the conversion of sour natural gas streams, by conversion to liquid hydrocarbons. Particular processes and their associated apparatuses advantageously combine (i) dehydroaromatization (DHA) of methane in a gaseous feedstock, to produce aromatic hydrocarbons such as benzene, with (ii) the reaction of H2S and methane in this feedstock, to produce organic sulfur compounds such as carbon disulfide (CS2) and thiophene (C4H4S). A gaseous product having a reduced concentration of H2S is thereby generated. The aromatic hydrocarbons and organic sulfur compounds may be recovered in a liquid product. Both the gaseous and liquid products may be easily amenable to further upgrading. Other advantages of the disclosed processes and apparatuses reside in their simplicity, whereby the associated streams, including a potential gaseous recycle, generally avoid high partial pressures of H2S.

03 NATURAL GAS↗

DOE OSTI2021

Compressed Expanded Natural Graphite (CENG) Processing for PCM Composites

The use of phase change materials (PCMs) in thermal energy storage applications has received considerable attention in recent decades. Organic PCMs are popular due to their high latent heat of fusion, noncorrosive properties, and relative stability over many charge and discharge cycles. A primary limitation of these materials is their low thermal conductivity. This has led researchers to develop various methods to increase thermal conductivity by seeding PCM with or impregnating them into more conductive materials. One method is to impregnate PCMs into compressed expanded natural graphite (CENG) matrices, which can improve thermal conductivity by a factor of 100. CENG matrices have received particular interest due to their low cost, high porosity, small (nano/micro) pore size, high pore density, high thermal conductivity, and ability to be compressed into many geometries. PCM/CENG matrix composites have been extensively studied; however, the effect that CENG processing has on PCM saturation and the overall matrix thermal conductivity has not been well investigated. This processing includes four major steps including graphite intercalation, thermal shock, compression, and PCM saturation. Intercalation involves soaking graphite flakes in sulfuric and/or nitric acid to intercalate the acids between the graphene layers. The graphite flakes are then subjected to a high-temperature thermal shock, during which the intercalated acid is gasified rapidly, pushing the graphene layers apart, resulting in accordion-shaped graphite "worms". The "worms" are then compacted to a desired bulk density and then soaked with molten PCM until fully saturated. The properties of the produced CENG matrix, and its ability to allow PCM permeation, are sensitive to the processing parameters, namely, the thermal shock temperature and exposure time, as well as the matrix apparent density or porosity. Here, we study the effect of the thermal shock conditions necessary to expand intercalated graphite flakes on PCM saturation and the expanded graphite's thermal conductivity and morphology. We found that the thermal shock temperature exhibits the greatest influence. At greater shock temperatures, SEM images showed that expanded graphite worms exhibited greater density of pores, thus increasing total surface area within the matrices. Increasing thermal shock temperature yielded greater overall PCM saturation, as well as an increased rate of saturation. Improvements in PCM saturation rate and overall saturation are obtained as the shock temperature is increased. Longer exposure to thermal shock also improves initial saturation rates and is beneficial if a shortened impregnation time is needed. Thermal shock conditions did not impact thermal conductivity; however, conductivity was largely affected by matrix porosity. A local maximum in axial thermal conductivity was observed at around 83% porosity, which is similar to that observed in previous studies.

compressed expanded natural graphite↗

DOE OSTI2022

Low-Cost Long-Duration Energy Storage at a Natural Gas Pipeline

An energy storage project based on Compressed Natural Gas Energy Storage (CNGES) technology is being studied at the Abbott Power Plant in Illinois. This article presents an overview of CNGES technology, assessment of the potential of implementing it at an existing pipeline, and preliminary results obtained from the Department of Energy–funded Abbott Power Plant study.

03 NATURAL GAS↗