Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Model optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Selection of optimal wavelengths for optical soiling modelling and detection in photovoltaic modules

Soiling impacts the photovoltaic (PV) module performance by decreasing the amount of light reaching the photovoltaic cells and by changing their external spectral response. Currently, the soiling monitoring market is moving toward optical sensors that measure transmittance or reflectance, rather than directly measuring the impact of soiling on the performance of photovoltaic modules. These sensors, which use a single optical measurement, are not able to correct the soiling losses that depend on the solar irradiance spectra and on the spectral response of the monitored PV material. This work investigates methods that can improve the optical detection of soiling by extracting the full soiling spectrum profiles using only two or three monochromatic measurements. Spectral transmittance data, measured with a spectrophotometer and collected during a 46-week experimental soiling study carried out in Jaén, Spain, was analysed in this work. The use of a spectral profile for the hemispherical transmittance of soiled PV glass is found to significantly improve the soiling detection, returning the lowest errors independently of the PV materials and irradiance conditions. In addition, this work shows that it is also possible to select the measurement wavelengths to minimize the soiling loss detection error depending on the monitored PV semiconductor material (silicon, CdTe, a-Si, CIGS and a representative perovskite). The approaches discussed in this work are also found to be more robust to potential measurement errors compared to single wavelength measurement techniques.

14 SOLAR ENERGY↗
DOE OSTI2026

Simple device modification simultaneously enhances indoor passive evaporative cooling power and duration

Passive evaporative cooling from a damp cloth or vessel can be used for localized cooling of perishables such as food and medicine, drinking water, and even people. Such applications have two key objectives, which are normally in tension with each other: minimizing the water consumption rate and maximizing the cooling (steady-state temperature swing between the cool cloth and the warm surroundings). Here, we present a simple device that delivers higher performance in both metrics simultaneously by adding a perforated aluminum foil sheet suspended over a stagnant air layer to thermally shield the evaporating surface while also facilitating mass transfer. Experimental results demonstrate a simultaneous 10%–25% increase in temperature swing and 2–3× reduction in water consumption rate as compared to conventional evaporative cooling. This improvement is achieved through careful modeling to optimize the coupled heat and mass transfer through the airgap (thermally insulating and vapor permeable) and perforated foil (infrared reflective and vapor permeable).

Chen, Sarah Mizuno↗
DOE OSTI2022

Stabilization of Dinuclear Rhodium and Iridium Clusters on Layered Titanate and Niobate Supports

Atomically dispersed organometallic clusters can provide well-defined nuclearity of active sites for both fundamental studies as well as new regimes of activity and selectivity in chemical transformations. More recently, dinuclear clusters adsorbed onto solid surfaces have shown novel catalytic properties resulting from the synergistic effect of two metal centers to anchor different reactant species. Difficulty in synthesizing, stabilizing, and characterizing isolated atoms and clusters without agglomeration challenges allocating catalytic performance to atomic structure. Here, we explore the stability of dinuclear rhodium and iridium clusters adsorbed onto layered titanate and niobate supports using molecular precursors. Both systems maintain their nuclearity when Statistical analysis of HAADF-STEM images revealed that rhodium and iridium dimers had mean cluster-to-cluster distances very similar to what is expected from a random distribution of atoms over a large area, indicating that they are dispersed without aggregation. The stability of dinuclear rhodium clusters supported on titanate nanosheets was also investigated by X-ray absorption fine structure (EXAFS), DRIFTS, and first-principles calculations. Both X-ray absorption spectroscopy and HAADF-STEM simulations, guided by density functional theory (DFT)-optimized structure models, suggested that rhodium dimers adsorb onto the nanosheets in an end-on binding mode that is stable up to 100 degrees C under reducing conditions. Finally, this study highlights that crystalline nanosheets derived from layered metal oxides can be used as model supports to selectively stabilize dinuclear clusters, which could have implications for heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Incorporating Electronic Information into Machine Learning Potential Energy Surfaces via Approaching the Ground-State Electronic Energy as a Function of Atom-Based Electronic Populations

Machine learning (ML) approximations to density functional theory (DFT) potential energy surfaces (PESs) are showing great promise for reducing the computational cost of accurate molecular simulations, but at present, they are not applicable to varying electronic states, and in particular, they are not well suited for molecular systems in which the local electronic structure is sensitive to the medium to long-range electronic environment. With this issue as the focal point, we present a new machine learning approach called "BpopNN" for obtaining efficient approximations to DFT PESs. Conceptually, the methodology is based on approaching the true DFT energy as a function of electron populations on atoms; in practice, this is realized with available density functionals and constrained DFT (CDFT). Additionally, the new approach creates approximations to this function with neural networks. These approximations thereby incorporate electronic information naturally into a ML approach, and optimizing the model energy with respect to populations allows the electronic terms to self-consistently adapt to the environment, as in DFT. We confirm the effectiveness of this approach with a variety of calculations on LinHn clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Techno-economic Analysis and Life Cycle Assessment of Gluconic Acid and Xylonic Acid Production from Waste Materials

Organic acid-based bioleaching has attracted significant research interest for the recovery of rare earth elements(REEs) and other critical metals. Utilizing biologically produced leaching agents, known as biolixiviants, derived from waste materials holds great promise for enhancing the economic viability and environmental sustainability of bioleaching processes. Here this study focuses on the modeling and optimization of biolixiviant production using corn stover (CS), date palm clippings (DP), and nonrecyclable paper (NP). Techno-economic analysis revealed that gluconic acid production from NP is more cost-effective than that from CS and DP, with respective costs of $0.04/kg, $0.06−0.08/kg, and $0.06−0.09/kg of the biolixiviant, yielding gluconic acid concentrations of 135.39, 172.90, and 176.87 mM, respectively. Life cycle assessment demonstrated that biolixiviant production from NP exerts the lowest environmental impact compared with the other evaluated substrates. When applied to the bioleaching of a neodymium−iron−boron magnet swarf, the biolixiviant derived from NP exhibits the highest leaching efficiencies, confirming its cost and environmental competitiveness in comparison to CS and DP

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

A constraint on historic growth in global photosynthesis due to rising CO 2

Theory predicts that rising CO 2 increases global photosynthesis, a process known as CO 2 fertilization, and that this is responsible for much of the current terrestrial carbon sink. The estimated magnitude of the historic CO 2 fertilization, however, differs by an order of magnitude between long-term proxies, remote sensing-based estimates and terrestrial biosphere models. Here we constrain the likely historic effect of CO 2 on global photosynthesis by combining terrestrial biosphere models, ecological optimality theory, remote sensing approaches and an emergent constraint based on global carbon budget estimates. Our analysis suggests that CO 2 fertilization increased global annual terrestrial photosynthesis by 13.5 ± 3.5% or 15.9 ± 2.9 PgC (mean ± s.d.) between 1981 and 2020. Our results help resolve conflicting estimates of the historic sensitivity of global terrestrial photosynthesis to CO 2 and highlight the large impact anthropogenic emissions have had on ecosystems worldwide.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Operational and geological controls of coupled poroelastic stressing and pore-pressure accumulation along faults: Induced earthquakes in Pohang, South Korea

Coupled poroelastic stressing and pore-pressure accumulation along pre-existing faults in deep basement contribute to recent occurrence of seismic events at subsurface energy exploration sites. Our coupled fluid-flow and geomechanical model describes the physical processes inducing seismicity corresponding to the sequential stimulation operations in Pohang, South Korea. Simulation results show that prolonged accumulation of poroelastic energy and pore pressure along a fault can nucleate seismic events larger than M w 3 even after terminating well operations. In particular the possibility of large seismic events can be increased by multiple-well operations with alternate injection and extraction that can enhance the degree of pore-pressure diffusion and subsequent stress transfer through a rigid and low-permeability rock to the fault. This study demonstrates that the proper mechanistic model and optimal well operations need to be accounted for to mitigate unexpected seismic hazards in the presence of the site-specific uncertainty such as hidden/undetected faults and stress regime.

58 GEOSCIENCES↗
DOE OSTI2020

One-pot hydrodeoxygenation (HDO) of lignin monomers to C9 hydrocarbons co-catalysed by Ru/C and Nb 2 O 5

A physical mixture of Ru/C and Nb 2 O 5 is an effective catalyst for upgrading lignin monomers under low H 2 pressure at 250 °C to a clean cut of hydrocarbon liquid fuels. The reaction solvent is water with a small amount of methanol additive. Hydrodeoxygenation (HDO) was evaluated using dihydroeugenol (DHE) as an exemplary lignin monomer model. Under optimized conditions, 100% conversion of DHE and very high selectivity to propyl cyclohexane (C9 hydrocarbon) was achieved. Nb 2 O 5 was prepared at a low temperature (450 °C) and was shown to contain acid sites that enhance the production of fully deoxygenated products. The methanol additive serves as a hydrogen source for the Ru/C catalysed reduction of the aromatic ring. In addition, when a substrate mixture of DHE, isoeugenol and 4-allylsyringol simulating lignin products was employed, 100% conversion to propyl cyclohexane (76%) and propyl benzene (24%) was observed, thereby suggesting the general applicability of this catalyst system for funneling lignin monomers into a clean cut of hydrocarbon liquid fuels. This study sheds light on the function of each catalyst component and provides a simple and green utilization of biomass monomers as a feedstock for renewable hydrocarbon fuels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Energy utilization strategies in lignocellulosic biorefineries

Lignocellulosic biorefineries can generate various energy-rich side streams, including biogas from anaerobic digestion, a lignin stream from biomass pretreatment, and conversion residues. This study evaluates different chemical energy utilization strategies in lignocellulosic biorefineries based on energy and carbon efficiencies, cost, and greenhouse gas mitigation potential. Specifically, using modeling and optimization, we examine strategies that include electricity generation, biogas upgrade to biomethane, lignin valorization, and carbon capture and storage. We find that upgrading biogas to biomethane demonstrates the highest energy efficiency and leads to the lowest minimum fuel selling price for the main product, ethanol. The biorefinery with carbon capture and storage achieves the lowest net carbon footprint. Lignin valorization has the highest carbon footprint due to the additional materials required for lignin depolymerization, despite its potential to produce high value bioproducts.

Aboagye, Emmanuel A. [Princeton Univ., NJ (United ↗
DOE OSTI2023

Understanding the fusion yield dependencies in OMEGA DT-layered implosion experiments using a physics-based statistical mapping model

Improving the performance of inertial confinement fusion implosions requires physics models that can accurately predict the response to changes in the experimental inputs. Good predictive capability has been demonstrated for the fusion yield using a statistical mapping of simulated outcomes to experimental data [Gopalaswamy et al., Nature 565(771), 581–586 (2019)]. In this paper, a physics-based statistical mapping approach is used to extract and quantify all the major sources of degradation of fusion yield for direct-drive implosions on the OMEGA laser. Here, the yield is found to be dependent on the age of the deuterium tritium fill, the ℓ = 1 asymmetry in the implosion core, the laser beam-to-target size ratio, and parameters related to the hydrodynamic stability. A controlled set of experiments were carried out where only the target fill age was varied while keeping all other parameters constant. The measurements were found to be in excellent agreement with the fill age dependency inferred using the mapping model. In addition, a new implosion design was created, guided by the statistical mapping model by optimizing the trade-offs between increased laser energy coupling at larger target size and the degradations caused by the laser beam-to-target size ratio and hydrodynamic instabilities. When experimentally performed, an increased fusion yield was demonstrated in targets with larger diameters.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

EFIT-Prime: Probabilistic and physics-constrained reduced-order neural network model for equilibrium reconstruction in DIII-D

We introduce EFIT-Prime, a novel machine learning surrogate model for EFIT (Equilibrium FIT) that integrates probabilistic and physics-informed methodologies to overcome typical limitations associated with deterministic and ad hoc neural network architectures. EFIT-Prime utilizes a neural architecture search-based deep ensemble for robust uncertainty quantification, providing scalable and efficient neural architectures that comprehensively quantify both data and model uncertainties. Physically informed by the Grad–Shafranov equation, EFIT-Prime applies a constraint on the current density J tor and a smoothness constraint on the first derivative of the poloidal flux, ensuring physically plausible solutions. Furthermore, the spatial location of the diagnostics is explicitly incorporated in the inputs to account for their spatial correlation. Extensive evaluations demonstrate EFIT-Prime's accuracy and robustness across diverse scenarios, most notably showing good generalization on negative-triangularity discharges that were excluded from training. Timing studies indicate an ensemble inference time of 15 ms for predicting a new equilibrium, offering the possibility of plasma control in real-time, if the model is optimized for speed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Autonomous Tuning and Charge-State Detection of Gate-Defined Quantum Dots

Defining quantum dots in semiconductor-based heterostructures is an essential step in initializing solid-state qubits. With growing device complexity and increasing number of functional devices required for measurements, a manual approach to finding suitable gate voltages to confine electrons electrostatically is impractical. Here, we implement a two-stage device characterization and dot-tuning process, which first determines whether devices are functional and then attempts to tune the functional devices to the single or double quantum-dot regime. We show that automating well-established manual-tuning procedures and replacing the experimenter’s decisions by supervised machine learning is sufficient to tune double quantum dots in multiple devices without premeasured input or manual intervention. The quality of measurement results and charge states are assessed by four binary classifiers trained with experimental data, reflecting real device behavior. We compare and optimize eight models and different data preprocessing techniques for each of the classifiers to achieve reliable autonomous tuning, an essential step towards scalable quantum systems in quantum-dot-based qubit architectures.

Darulova, J↗
DOE OSTI2025

Neutrino-nucleus cross section impacts on neutrino oscillation measurements

The challenges in neutrino-nucleus cross section modeling and its impact on neutrino oscillation experiments are widely recognized. However, a comprehensive and theoretically robust estimation of cross section uncertainties has been lacking, and few studies have quantitatively examined their impact on oscillation measurements. In this work, we evaluate the effect of cross section uncertainties on oscillation parameters using setups inspired by NOvA and DUNE. To characterize these uncertainties, we adopt multiple neutrino-nucleus event generators and simulate a realistic experimental procedure that incorporates near-detector data and near-to-far-detector extrapolation. Our results confirm that cross section uncertainties cannot significantly bias oscillation results in current statistics-dominated experiments like NOvA. However, they could lead to substantial bias for future systematics-dominated experiments like DUNE, even when near-detector data are employed to mitigate uncertainties. These findings underscore the need for further studies on the quantitative impacts of cross section modeling, improved strategies to utilize near-detector data and the PRISM concept, and more robust cross section models to optimize the success of future experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Artificial Intelligence Designer of Materials and Processes for Advanced Power Generation

In this presentation, ‘deep-freeze’ graphs, ‘convoluted filtering’ networks, ‘mirror-image’ graphs, and adversarial ensemble methods are utilized to support inversion modeling for optimization of the complex compositions and complex processes in design of high-performing alloys, with their properties tailored to the energy application specifications.

Romanov, Vyacheslav↗
DOE OSTI2021

A Survey: Handling Irregularities in Neural Network Acceleration with FPGAs

In the last decade, Artificial Intelligence (AI) through Deep Neural Networks (DNNs) has penetrated virtually every aspect of science, technology, and business. Many types of DNNs have been and continue to be developed, including Convolutional Neural Networks (CNNs), Recurrent Neural Net- works (RNNs), and Graph Neural Networks (GNNs). The overall problem for all of these Neural Networks (NNs) is that their target applications generally pose stringent constraints on latency and throughput, while also having strict accuracy requirements. There have been many previous efforts in creating hardware to accelerate NNs. The problem designers face is that optimal NN models typically have significant irregularities, making them hardware-unfriendly. In this paper, we first define the problems in NN acceleration by characterizing common irregularities in NN processing into 4 types; then we summarize the existing works that handle the four types of irregularities efficiently using hardware, especially FPGAs; finally, we provide a new vision of next-generation FPGA-based NN acceleration: that the emerging heterogeneity in the next-generation FPGAs is the key to achieving higher performance.

Geng, Tong↗