Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mixture modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Methane Production by Microbial Mats Under Low Sulfate Concentrations

Cyanobacterial mats collected in hypersaline salterns were incubated in a greenhouse under low sulfate concentrations ([SO4]) and examined for their primary productivity and emissions of methane and other major carbon species. Atmospheric greenhouse warming by gases such as carbon dioxide and methane must have been greater during the Archean than today in order to account for a record of moderate to warm paleoclemates, despite a less luminous early sun. It has been suggested that decreased levels of oxygen and sulfate in Archean oceans could have significantly stimulated microbial methanogenesis relative to present marine rates, with a resultant increase in the relative importance of methane in maintaining the early greenhouse. We maintained modern microbial mats, models of ancient coastal marine communities, in artificial brine mixtures containing both modern [SO4=] (ca. 70 mM) and "Archean" [SO4] (less than 0.2 mM). At low [SO4], primary production in the mats was essentially unaffected, while rates of sulfate reduction decreased by a factor of three, and methane fluxes increased by up to ten-fold. However, remineralization by methanogenesis still amounted to less than 0.4 % of the total carbon released by the mats. The relatively low efficiency of conversion of photosynthate to methane is suggested to reflect the particular geometry and chemical microenvironment of hypersaline cyanobacterial mats. Therefore, such mats w-ere probably relatively weak net sources of methane throughout their 3.5 Ga history, even during periods of low- environmental levels oxygen and sulfate.

Bebout, Brad M.↗
NASA NTRS2001

Classification Experiments on Real-World Texture

Many papers have been published concerning the analysis of visual texture and yet, very few application domains use texture for image classification. A possible reason for this low transfer of the technology is the lack of experience and testing in real-world imagery. In this paper, we assess the performance of texture-based classification methods on a number of real-world images relevant to autonomous navigation on cross-country terrain and to autonomous geology. Texture analysis will form part of the closed loop that allows a robotic system to navigate autonomously. We have implemented two different classifiers on features extracted by Gabor filter banks. The first classifier models feature distributions for each texture class using a mixture of Gaussians. Classification is performed using Maximum Likelihood. The second classifier represents local statistics using marginal histograms of the features over a region centered on the pixel to be classified. We measure system performance by comparison to ground truth image labels.

image segmentation↗
NASA NTRS2006

Program for Analyzing Flows in a Complex Network

Generalized Fluid System Simulation Program (GFSSP) version 4 is a general-purpose computer program for analyzing steady-state and transient flows in a complex fluid network. The program is capable of modeling compressibility, fluid transients (e.g., water hammers), phase changes, mixtures of chemical species, and such externally applied body forces as gravitational and centrifugal ones. A graphical user interface enables the user to interactively develop a simulation of a fluid network consisting of nodes and branches. The user can also run the simulation and view the results in the interface. The system of equations for conservation of mass, energy, chemical species, and momentum is solved numerically by a combination of the Newton-Raphson and successive-substitution methods.

Majumdar, Alok Kumar↗
NASA NTRS2025

Assessment of Radiation Scattering by Dust in Mars Entry

The impact of gas phase radiation scattering by dust particle presence in Mars entry scenarios is assessed using a suite of numerical tools. A hypersonic gas and dilute particle multiphase flow is simulated using a mixed continuum model and an efficient size distribution quadrature scheme. Radiative transport is simulated with a hybrid ray-tracing and P1 spherical harmonics model. The NASA HARA radiation code and a Lorentz-Mie scattering model are used to predict the gas-particle mixture radiative properties. Application of the numerical suite to a representative case based on the Mars 2020 entry shows that, even at conditions in excess of the strongest recorded dust storm, the augmentation in surface radiative heat flux due to scattering alone is lower than 1%, and therefore negligible. Predictions with even higher dust loading conditions confirm that even highly uncertain dust mass profiles are unlikely to be a concern for the scattering augmentation mechanism.

Andrew Hinkle↗
DOE OSTI2023

An Assessment of Kinetic Models for Ammonia Flame Extinction

The growing interest in using ammonia as a carbon-neutral replacement fuel has prompted numerous recent research efforts towards understanding fundamental combustion characteristics and chemical kinetics of ammonia oxidation. Despite these recent efforts, there remains a large deficiency in extinction limit data for ammonia flames, particularly under elevated pressure and temperature conditions relevant to gas turbines. Even the literature reaction mechanisms developed specifically for ammonia have been untested under gas turbine relevant conditions, and existing kinetic models have shown large variations in laminar flame speed, extinction strain rate, and speciation predictions for NH3–H2 mixtures at ambient conditions. Recent work by Thomas and co-workers, for example, compared different ammonia kinetic models in the literature for predicting their extinction strain rate measurements for non-premixed NH3-H2 counterflow flames, and again have highlighted the discrepancies in model predictions. Here, our work has undertaken to further highlight important reaction pathways for ammonia oxidation that may be responsible for these discrepancies for extinction strain rate predictions, as well as elucidate sensitive reaction steps with large uncertainties that require further attention. This work points to a need for an improved understanding of ammonia combustion chemistry as well as new datasets at elevated pressure and temperature conditions to better constrain rate expressions for key reaction steps.

ammonia, flame, combustion, kinetic, kinetics↗
DOE OSTI2020

Sorption of Anionic Iodine and Molybdenum to Multi-sorbing Barrier (MSB) Materials - 20030

A multi-sorbing barrier (MSB) material containing sodium bentonite (NaB), organoclay, and anion resin is being evaluated for containment of anionic radionuclides. Batch tests on the MSB were conducted using two non-radioactive analog isotopes ({sup 127}I, {sup 95}Mo) as surrogates for {sup 129}I and {sup 99}Tc due to their similar valence and molecular weight relative to the radionuclides. Tests were conducted on the organoclay, anion resin, and NaB individually and on NaB-resin blends with resin contents of 1% and 5% by mass. The anion resin exhibits very strong sorption of {sup 127}I and {sup 95}Mo relative to the other materials. The organoclay exhibited modest sorption of {sup 95}Mo and {sup 127}I, and NaB little sorption. The sorption isotherms follow a linear model for NaB, a Freundlich model for the organoclay, and a Langmuir model for the anion resin and NaB-resin mixtures. Combining resin with NaB significantly enhances sorption relative to NaB alone, with a larger resin fraction yielding greater sorption. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1992

Compositional variations in Apollo 17 soils and their relationship to the geology of the Taurus-Littrow site

New compositional data for major and trace elements in Apollo 17 solids are combined with data from the literature in order to constrain a mass-balance model that accounts for the compositions of most solids as mixtures of a small number of lithologic components observed at the site. Variation in the proportions of six chemical components accounts for most of the compositional variation in the solids. Each of the components is represented by lithological components observed in the regolith. Three of the chemical components are of mare origin: high-Ti mare basalt, LTV basalt, and pyroclastic orange glass. Three are of highland origin: noritic impact-melt breccia, anorthositic norite breccia, and high-Mg/Fe troctolites and norites. Results from a six-component mass-balance model indicate that VLT basalt composes only about 8 percent of the total basalt component, while orange glass composes up to 26 percent of some solids. The troctolite/norite component is only important in soils from the North Massif.

Korotev, Randy L.↗
NASA NTRS2009

Use of Intermittent Recompression and Nitrox Breathing Mixtures during Lunar Extravehicular Activities

INTRODUCTION: NASA's plans for lunar surface exploration include pressurized suitport rovers that are quickly ingressed and egressed with minimal consumables losses. This capability enables crewmembers to perform multiple short extravehicular activities (EVAs) at different locations in a single day versus a single 8-hr EVA. Modeling work and empirical human and animal data indicate that intermittent recompressions between EVA suit pressure and cabin pressure reduce decompression stress. Savings in crew time and gas losses may also be achieved if the N2 purge is shortened to 2 minutes, achieving 80% O2 (vs. 8 minutes, 95% O2). METHODS: A validated Tissue Bubble Dynamics Model was used to predict decompression stress using 80% and 95% O2 breathing mixtures during 3 x 2-hr EVAs (4.3 PSIA) with 1hr recompressions back to 8.0 PSIA (32% O2) versus a single 8-hr EVA. 15 minutes was spent at 6.0 PSIA before depressurizations to 4.3 PSIA; initial EVA tasks could be performed during this time. Model validation was based on significant prediction (p<0.001) and goodness of fit with 84 cases of DCS in 668 altitude exposures (McFadden s rho-squared=0.214). RESULTS: A 2.2% predicted increase in DCS risk due to the shortened purge is more than compensated for by a predicted 2.5% reduction in DCS risk due to intermittent recompression. 15 minutes at 80% O2, 6.0 PSIA prior to a 4.3 PSIA EVA prevents supersaturation in the brain and spinal cord (5-10 minute half-time compartments) and reduces tissue tensions in 40 min compartments, where most of the body s inert gas is located, to approximately the same levels (4.39 vs 4.00 PSIA) as achieved during a 40 min 95% O2 prebreathe at 10.2 PSIA. CONCLUSIONS: Intermittent recompressions between lunar EVAs may enable reductions in suit purge and prebreathe requirements, decompression stress, and/or suit operating pressures.

Gernhardt, M.L.↗
NASA NTRS1986

Effect of silane concentration on the supersonic combustion of a silane/methane mixture

A series of direct connect combustor tests was conducted to determine the effect of silane concentration on the supersonic combustion characteristics of silane/methane mixtures. Shock tube ignition delay data indicated more than an order of magnitude reduction in ignition delay times for both 10 and 20 percent silane/methane mixtures as compared to methane. The ignition delay time of the 10 percent mixture was only a factor of 2.3 greater than that of the 20 percent mixture. Supersonic combustion tests were conducted with the fuel injected into a model scramjet combustor. The combustor was mounted at the exit of a Mach 2 nozzle and a hydrogen fired heater was used to provide a variation in test gas total temperature. Tests using the 20 percent silane/methane mixture indicated considerable combustion enhancement when compared to methane alone. This mixture had an autoignition total temperature of 1650 R. This autoignition temperature can be contrasted with 2330 R for hydrogen and 1350 R for a 20 percent silane/hydrogen mixture in similar hardware. Methane without the silane additive did not autoignite in this configuration at total temperatures as high as 3900 R, the maximum temperature at which tests were conducted. Supersonic combustion tests with the silane concentration reduced to 10 percent indicated little improvement in combustion performance over pure methane. The addition of 20 percent silane to methane resulted in a pyrophoric fuel with good supersonic combustion performance. Reducing the silane concentration below this level, however, yielded a less pyrophoric fuel that exhibited poor supersonic combustion performance.

Northam, G. B.↗
NASA NTRS2011

Analysis of ALTAIR 1998 Meteor Radar Data

We describe a new analysis of a set of 32 UHF meteor radar traces recorded with the 422 MHz ALTAIR radar facility in November 1998. Emphasis is on the velocity measurements, and on inferences that can be drawn from them regarding the meteor masses and mass densities. We find that the velocity vs altitude data can be fitted as quadratic functions of the path integrals of the atmospheric densities vs distance, and deceleration rates derived from those fits all show the expected behavior of increasing with decreasing altitude. We also describe a computer model of the coupled processes of collisional heating, radiative cooling, evaporative cooling and ablation, and deceleration - for meteors composed of defined mixtures of mineral constituents. For each of the cases in the data set we ran the model starting with the measured initial velocity and trajectory inclination, and with various trial values of the quantity mPs 2 (the initial mass times the mass density squared), and then compared the computed deceleration vs altitude curves vs the measured ones. In this way we arrived at the best-fit values of the mPs 2 for each of the measured meteor traces. Then further, assuming various trial values of the density Ps, we compared the computed mass vs altitude curves with similar curves for the same set of meteors determined previously from the measured radar cross sections and an electrostatic scattering model. In this way we arrived at estimates of the best-fit mass densities Ps for each of the cases. Keywords meteor ALTAIR radar analysis 1 Introduction This paper describes a new analysis of a set of 422 MHz meteor scatter radar data recorded with the ALTAIR High-Power-Large-Aperture radar facility at Kwajalein Atoll on 18 November 1998. The exceptional accuracy/precision of the ALTAIR tracking data allow us to determine quite accurate meteor trajectories, velocities and deceleration rates. The measurements and velocity/deceleration data analysis are described in Sections II and III. The main point of this paper is to use these deceleration rate data, together with results from a computer model, to determine values of the quantities mPs 2 (the meteor mass times its material density squared); and further, by combining these m s 2 values with meteor mass estimates for the same set of meteors determined separately from measured radar scattering

Zinn, J.↗
NASA NTRS1979

Chemical kinetic modeling of benzene and toluene oxidation behind shock waves

The oxidation of stoichiometric mixtures of benzene and toluene behind incident shock waves was studied for a temperature range from 1700 to 2800 K and a pressure range from 1.1 to 1.7 atm. The concentration of CO and CO2 produced were measured as well as the product of the oxygen atom and carbon monoxide concentrations. Comparisons between the benzene experimental data and results calculated by use of a reaction mechanism published in the open literature were carried out. With some additional reactions and changes in rate constants to reflect the pressure-temperature range of the experimental data, a good agreement was achieved between computed and experimental results. A reaction mechanism was developed for toluene oxidation based on analogous rate steps from the benzene mechanism. Measurements of NOx levels in an actual flame device, a jet-stirred combustor, were reproduced successfully by use of the reaction mechanism developed from the shock-tube experiments on toluene. These experimental measurements of NOx levels were reproduced from a computer simulation of a jet-stirred combustor.

Mclain, A. G.↗
NASA NTRS1985

Quantitative determination of mineral types and abundances from reflectance spectra using principal components analysis

A procedure was developed for analyzing remote reflectance spectra, including multispectral images, that quantifies parameters such as types of mineral mixtures, the abundances of mixed minerals, and particle sizes. Principal components analysis reduced the spectral dimensionality and allowed testing the uniqueness and validity of spectral mixing models. By analyzing variations in the overall spectral reflectance curves, the type of spectral mixture was identified, mineral abundances quantified and the effects of particle size identified. The results demonstrate an advantage in classification accuracy over classical forms of analysis that ignore effects of particle-size or mineral-mixture systematics on spectra. The approach is applicable to remote sensing data of planetary surfaces for quantitative determinations of mineral abundances.

Smith, M. O.↗
DOE OSTI2024

Autonomous hybrid optimization of a SiO 2 plasma etching mechanism

Computational modeling of plasma etching processes at the feature scale relevant to the fabrication of nanometer semiconductor devices is critically dependent on the reaction mechanism representing the physical processes occurring between plasma produced reactant fluxes and the surface, reaction probabilities, yields, rate coefficients, and threshold energies that characterize these processes. The increasing complexity of the structures being fabricated, new materials, and novel gas mixtures increase the complexity of the reaction mechanism used in feature scale models and increase the difficulty in developing the fundamental data required for the mechanism. This challenge is further exacerbated by the fact that acquiring these fundamental data through more complex computational models or experiments is often limited by cost, technical complexity, or inadequate models. In this paper, we discuss a method to automate the selection of fundamental data in a reduced reaction mechanism for feature scale plasma etching of SiO 2 using a fluorocarbon gas mixture by matching predictions of etch profiles to experimental data using a gradient descent (GD)/Nelder–Mead (NM) method hybrid optimization scheme. These methods produce a reaction mechanism that replicates the experimental training data as well as experimental data using related but different etch processes.

36 MATERIALS SCIENCE↗
NASA NTRS1990

Modeling of collision and coalescence of droplets during microgravity processing of Zn-Bi immiscible alloys

A population balance model is presented for the coarsening of the dispersed phase of liquid-liquid two-phase mixtures in microgravity due to gravity sedimentation and Marangoni migration, which lead to the collision and coalescence of droplets. The model is used to predict the evolution of the size distribution of the dispersed phase in a liquid-phase miscibility gap system, Zn-Bi, which has been used in a number of experimental microgravity processing studies in which significant phase segregation has been observed. The analysis shows that increasing the temperature gradient, gravity level, volume fraction of the dispersed phase, initial average drop radius, initial standard deviation of droplet radii, or the temperature coefficient of the interfacial tension leads to an increase in the rate of droplet growth due to collision and coalescence. Comparison of the distribution evolutions for unimodal and bimodal initial distributions shows that the latter yield significantly more rapid droplet growth. Finally, it is shown that droplet growth can be dramatically reduced with antiparallel orientation of the gravity vector and the temperature gradient, provided that the relative magnitude of these two vectors is properly chosen.

Davis, R. H.↗
NASA NTRS1977

Similarity laws of lunar and terrestrial volcanic flows

A mathematical model for the terrestrial and lunar volcanic flows is proposed. This mathematical model, which is one-dimensional, steady duct flow of a mixture of a gas and small solid particles (rock), has been analyzed in detail. The similarities and the differences of the essential features of lunar and terrestrial volcanic flows are determined. Numerical results for the equilibrium two-phase flows of lunar and terrestrial volcanics under similar conditions are presented. The main results of the theoretical model are: the lunar crater is much larger than the corresponding terrestrial crater; the exit velocity from the lunar volcanic flow may be higher than the lunar escape velocity but the exit velocity of terrestrial volcanic flow is much less than that of the linear case (this result confirms the hypothesis that Australian tektites came from the moon, as a stream of rock and gas of extremely high speed), and the thermal effects on the lunar volcanic flow are much larger than those in the terrestrial case.

Pai, S. I.↗
DOE OSTI2023

Fluctuating hydrodynamics and the Rayleigh–Plateau instability

The Rayleigh–Plateau instability occurs when surface tension makes a fluid column become unstable to small perturbations. At nanometer scales, thermal fluctuations are comparable to interfacial energy densities. Consequently, at these scales, thermal fluctuations play a significant role in the dynamics of the instability. These microscopic effects have previously been investigated numerically using particle-based simulations, such as molecular dynamics (MD), and stochastic partial differential equation–based hydrodynamic models, such as stochastic lubrication theory. In this paper, we present an incompressible fluctuating hydrodynamics model with a diffuse-interface formulation for binary fluid mixtures designed for the study of stochastic interfacial phenomena. An efficient numerical algorithm is outlined and validated in numerical simulations of stable equilibrium interfaces. We present results from simulations of the Rayleigh–Plateau instability for long cylinders pinching into droplets for Ohnesorge numbers of Oh = 0.5 and 5.0. Both stochastic and perturbed deterministic simulations are analyzed and ensemble results show significant differences in the temporal evolution of the minimum radius near pinching. Short cylinders, with lengths less than their circumference, were also investigated. As previously observed in MD simulations, we find that thermal fluctuations cause these to pinch in cases where a perturbed cylinder would be stable deterministically. Finally, we show that the fluctuating hydrodynamics model can be applied to study a broader range of surface tension–driven phenomena.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2004

Quantifying Grassland-to-Woodland Transitions and the Implications for Carbon and Nitrogen Dynamics in the Southwest United States

Replacement of grasslands and savannas by shrublands and woodlands has been widely reported in tropical, temperate and high-latitude rangelands worldwide (Archer 1994). These changes in vegetation structure may reflect historical shifts in climate and land use; and are likely to influence biodiversity, productivity, above- and below ground carbon and nitrogen sequestration and biophysical aspects of land surface-atmosphere interactions. The goal of our proposed research is to investigate how changes in the relative abundance of herbaceous and woody vegetation affect carbon and nitrogen dynamics across heterogeneous savannas and shrub/woodlands. By linking actual land-cover composition (derived through spectral mixture analysis of AVIRIS, TM, and AVHRR imagery) with a process-based ecosystem model, we will generate explicit predictions of the C and N storage in plants and soils resulting from changes in vegetation structure. Our specific objectives will be to (1) continue development and test applications of spectral mixture analysis across grassland-to-woodland transitions; (2) quantify temporal changes in plant and soil C and N storage and turnover for remote sensing and process model parameterization and verification; and (3) couple landscape fraction maps to an ecosystem simulation model to observe biogeochemical dynamics under changing landscape structure and climatological forcings.

Wessman, Carol A.↗
DOE OSTI2023

Separation of volatile organic contaminants from water using a direct-contact dehumidifier: An experimental study and modeling

A packed-bed, direct-contact dehumidifier (PB-DCD) has been developed to selectively condense water from a gaseous mixture of organic contaminants. In this process, hot air is humidified by mixing with wastewater vapor in a static mixer and is dehumidified by subcooled fresh water passing through the PB-DCD in a counter-current configuration. The goal of this study is to understand the relationship between various operating parameters and how they affect separation of isopropyl alcohol (IPA) from the gaseous mixture with the purpose of expanding the investigation to other contaminants in the future. The process has been successfully used to separate IPA from wastewater. Different parameters including the concentration of IPA in water, feed temperature, air-to-vapor ratio, and cooling-water-to-vapor mass ratio, as well as residence time were examined to determine their influence on contaminant separation and clean water recovery rate. The Buckingham Pi theorem was applied to reduce the number of studying variables by generating non-dimensional groups. Experiments were performed to determine the relationship between the non-dimensional parameters and model mass transfer in the system. Mass transfer coefficients for multicomponent gaseous mixture condensation in a packed-bed direct contact condenser column are calculated and a modified correlation of mass transfer is developed. The parameters of the mass transfer model are obtained from operating conditions of the PB-DCD, stream conditions and thermodynamic properties. A modified Sherwood correlation is developed to predict IPA separation from a gaseous mixture consisting of air, water, and IPA. The modified Sherwood correlation is applied to successfully predict the Sherwood number with a mean absolute error equal to 6.6 %. According to the experimental results, the maximum IPA separation achieved was 76.3 %, which corresponds to a water recovery rate of 58.7 %.

42 ENGINEERING↗