Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Material Response”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

High-pressure structural behavior of silicon telluride Si2Te3 nanoplates

The high-pressure behavior of silicon telluride (Si2Te3), a two-dimensional (2D) layered material, was investigated using synchrotron x-ray powder diffraction in a diamond anvil cell to 11.5GPa coupled with first-principles theory. Si2Te3 undergoes a phase transition at <1GPa from a trigonal to a hexagonal crystal structure. At higher pressures (>8.5GPa), x-ray diffraction showed the appearance of new peaks possibly coincident with a new phase transition, though we suspect Si2Te3 retains a hexagonal structure. Density functional theory calculations of the band structure reveal metallization above 9.1GPa consistent with previous measurements of the Raman spectra and disappearance of color and transparency at pressure. The theoretical Raman spectra reproduce the prominent features of the experiment, though a deeper analysis suggests that the orientation of Si dimers dramatically influences the vibrational response. Given the complex structure of Si2Te3, simulation of the resulting high-pressure phase is complicated by disordered vacancies and the initial orientations of Si–Si dimers in the crushed layered phase.

Li, Bohan↗
DOE OSTI2025

Viscosity-Controlled Thiol–Ene Reaction and Its Impact on Mechanical Response of Dynamic Networks

The impact of curing conditions on the final properties of thioester-thiol-based dynamic polymer networks was systematically investigated. Despite identical monomer and cross-linker compositions, networks synthesized in the absence of solvent exhibited significantly higher shear moduli and longer relaxation times compared to those cured in solvent. These differences arise from viscosity-controlled photoinitiated thiol–ene reactions, where reduced chain mobility under solvent-free conditions suppresses termination between two polymer radicals, leading to higher reaction conversion. Fourier Transform Infrared (FTIR) spectroscopy and solid-state NMR (ssNMR) spectroscopy confirmed a greater degree of “click” reaction completion in higher viscosity environments. Control experiments revealed that prolonged radical lifetimes and suppressed termination reactions under solvent-free curing conditions contribute to these variations. Here, this study highlights the crucial role of processing conditions in determining cross-link density and, consequently, the dynamic mechanical behavior of polymer networks. It demonstrates that, beyond polymer chemistry, dynamic cross-linker design, and phase separation, curing conditions serve as a key design parameter for tailoring material performance to specific applications.

polymers↗
DOE OSTI2024

Biodegradable Temperature & pH Sensors VIASTIMULI-Responsive Polymers

Soil sensors play a key role in agriculture, and for good reason; knowledge about soil conditions enables farmers to make informed decisions about resource expenditure and crop selection for areas of land. On an industrial agriculture scale, though, this is difficult; the average U.S. farm is approximately 500 acres. To put that in perspective, if you’ve driven past Concannon Winery, all that land is only about 200 acres. This is why modern state-of-the-art soil sensors need to be equipped to not only collect precise and accurate data, but also to transmit that data large distances.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Experimental Characterization and Modeling of High Hole Mobility GeSn Quantum Wells: The Role of Alloy Disorder Scattering

Understanding mechanisms influencing electrical transport in material systems not only provides a scientific explanation for observed behavior but also offers insight into ways to enhance transport in devices. This study reports experimental hole mobility of 8 x 10 4 cm 2 V -1 s -1 in a Ge 0.92 Sn 0.08 , the highest recorded mobility for the GeSn system. A study of the material's quality is presented using structural and electrical characterization techniques, with transport data being supported by simulations using an extensive modeling framework. Quantum Hall measurements further indicate the material's high quality and potential spintronic applications, with extracted values of 0.0689$m$ 0 and 13.6 for the effective mass and effective g‐factor, respectively. It is observed that transport is limited by alloy disorder scattering at cryogenic temperatures. A comparative study between the presented structure and similar quantum well heterostructures revealed that the difference in hole mobilities is captured by a disparity in the reduced nominal alloy disorder scattering potential (Δ U alloy = 0.8 eV), that is lower than the value of a fully random alloy (Δ U alloy = 1.4–1.7 eV) potential. The difference in Δ U alloy suggests that heterostructures with similar geometries and alloy compositions can have different alloy disorder scattering, implying that an underlying mechanism, such as short‐range order, may be responsible and warrants further investigation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

A simulation pipeline for fast neutron imaging and spectroscopy using quantified detector attributes

Radiation imaging capabilities, essential in the nuclear nonproliferation regime, facilitate source localization and, in certain cases, spectroscopy. Scatter-based neutron cameras, which can measure the neutron signatures from special nuclear material, hold particular interest. Systems incorporating organic scintillators can extract neutron energy spectra, potentially distinguishing fission neutron sources from others, such as alpha-neutron sources. The development and testing of a scatter-based neutron imager, however, can be challenging without having an accurate simulation model or first constructing a prototype. This work describes a simulation pipeline that takes output from MCNPX-PoliMi simulations and creates the expected back-projection neutron images and neutron energy spectra. This pipeline was developed to improve the modeling of fast neutron imagers and bridge the current gap in literature, which predominantly focuses on gamma-ray Compton imager models. This work also reports on the significance of various real-world system considerations and their effects on the simulated detector responses. The pipeline was verified and validated with experimental data collected using a 252 Cf spontaneous fission source using a fast neutron scattering imager developed at the University of Michigan.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Getting to the root of the problem: Soil carbon and microbial responses to root inputs within a buried paleosol along an eroding hillslope in southwestern Nebraska, USA

Large quantities of soil carbon (C) can persist within paleosols for millennia due to burial and subsequent isolation from plant-derived inputs, atmospheric conditions, and microbial activity at the modern surface. Erosion exposes buried soils to modern root-derived C influx via root exudation and root turnover, thus stimulating microbial activity leading to SOC decomposition and accumulation through organo-mineral stabilization of modern C. With this study we aim to quantify how modern root-derived C inputs impact paleosol C decomposition and stabilization across varying degrees of isolation from modern surface conditions in southwestern Nebraska, USA, where hillslope erosion is bringing a buried Late-Pleistocene-early Holocene paleosol (the “Brady Soil”) closer to the modern surface. We collected Brady Soil samples from 0.2m, 0.4m, and 1.2m below the modern surface and conducted two lab-based incubations. Soils were amended with either (1) a lab-synthesized mixture of low molecular weight compounds (12 atom% 13 C), or (2) 13 C enriched root residues (92 atom% 13 C), in 30-day and 240-day incubation experiments, respectively. Here we determined microbial responses to synthetic root exudates and residues by partitioning the 13 C label from Brady Soil C, including measurements of total, root, and primed C respiration, microbial biomass C (MBC), microbial C use efficiency (CUE). To assess the capacity of isolated paleosols to accrue modern plant C, we used Nano-scale Secondary Ion Mass Spectrometry imaging. We found that: (1) adding root-derived C inputs primed Brady Soil C across all depths, and was mediated by depth and composition of root additions; (2) root-derived C inputs stimulated microbial biomass C (MBC) growth similarly across depths, but the magnitude of CUE and MBC varied by chemistry of root-derived additions; (3) new particulate organic matter was incorporated into mineral-associated pools over time; (4) material from the added root residues was found in association with bacterial cells and fungal hyphae as well as with soil aggregate and mineral surfaces. Our study shows that paleosols defy expectations of C content and reactivity with depth, and changes in land cover and climate will expose buried paleosols to modern surface conditions, increasing respired C. This work highlights the importance of evaluating the role resurfacing buried soils through landscape change plays in C cycle feedbacks to the climate system.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Electronic topological transitions in cadmium under pressure studied via theoretical and experimental x-ray absorption spectroscopy

Here, an electronic topological transition (ETT) in cadmium below 1 GPa is investigated in situ with experimental x-ray absorption spectroscopy and projecting calculated core-valence excitons onto the band structure. These projections are a useful application of the Bethe-Salpeter equation approach that considers many-body effects. The method described herein can be used for systems that are otherwise difficult to probe in situ; therefore, it provides a generalizable approach to identifying and understanding ETTs under high pressure. Although pressure-induced ETTs are often probed using indirect structural responses, our own x-ray diffraction and Raman studies suggest a second-order structural transition around 3 GPa but are largely insensitive to or inconclusive for the previously studied ETT in this region.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Electric field driven domain wall dynamics in BaTiO 3 nanoparticles

We report a detailed investigation into the response of single BaTiO 3 (BTO) nanocrystals under applied electric fields (E-field) using Bragg coherent diffraction imaging. Our study reveals pronounced domain wall migration and expansion of a sample measure under applied electric field. The changes are most prominent at the surface of the nanocrystal, where the lack of external strain allows greater domain wall mobility. The observed domain shifts are correlated to the strength and orientation of the applied E-field, following a side-by-side domain model from Suzana []. Notably, we identified a critical electric field strength of 3 MV/m, which leads to irreversible structural changes, suggesting plastic deformation. The findings highlight how surface effects and intrinsic defects contribute to the enhanced dielectric properties of BTO at the nanoscale, in contrast to bulk materials, where strain limits domain mobility. These findings deepen our understanding of nanoscale dielectric behavior and inform the design of advanced nanoelectronic devices. Published by the American Physical Society 2025

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Radiation Dose Modeling for Niowave’s Accelerator Driven Uranium Target Assembly 3

Molybdenum-99 is a high-value radionuclide commonly used for medical purposes within the United States. The National Nuclear Security Administration (NNSA) seeks to reliably produce the radioisotope 99 Mo without the use of highly enriched uranium. NNSA’s Office of Material Management and Minimization (M3) provides funding and government laboratory expertise to private companies to expedite the production process domestically and currently funds designs that use low-enriched uranium or other 99 Mo production pathways. Several production designs are being explored across the industry, including uranium fission and photonuclear conversion of 100 Mo targets. Niowave Inc. seeks to produce 99 Mo via a high-energy electron accelerator that strikes a lead-bismuth eutectic target that ultimately produces a consistent neutron flux. The neutron flux then interacts in a subcritical reactor core configuration to produce fission in low-enriched or natural uranium targets. These fissionable targets are then processed to extract 99 Mo. The purpose of this work is to estimate the neutron and photon dose response across Niowave’s proposed facility for worker safety during operation. Owing to the size of the proposed Niowave facility and necessary shielding, unbiased Monte Carlo radiation transport is impractical, and variance reduction methods are required. This work focuses on the weight window variance reduction method to produce high confidence dose response results within a Monte Carlo radiation transport code. Specifically, an adjoint-informed weight window methodology was created to improve the dose response estimates for accelerator-driven subcritical reactor designs. This adjoint-informed methodology was implemented for Niowave’s proposed design and improved dose results at far-field locations across the facility. Acceptable dose rate contours for the proposed facility were generated across the facility and are presented in this work.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2025

Towards Universal Non-Dimensional Characterization of the Oscillatory Dynamics of Wind Turbine Rotors of Multiple Sizes

One concern in the field of Horizontal Axis Wind Turbines (HAWTs) is what control strategies are needed to handle gust pulses in the wind to prevent extreme oscillations of the blades to reduce fatigue stress, prevent blade rupture, and extend the turbine’s operational life. In order to design innovative control strategies to modify the blade’s oscillatory response, it is crucial to establish the fundamental vibrational behavior of the blades when excited by gust pulses of different frequencies and amplitudes present in the fluctuating wind inflow. In a series of previous works, the authors presented a novel Reduced-Order Characterization (ROC) technique that provided an energy-based characterization of the fundamental modes of oscillation of wind turbine rotors when excited by combinations of wind gust pulses of different frequencies and amplitudes. The main focus of the present work is to extend these original notions of energy-based ROC to a universal technique expressed in terms of non-dimensional quantities that could be applied to turbines of any size, operating in any set of wind conditions, as long as they share geometrical and material similarity. The ROC technique provides a simple formula that is capable of predicting the dominant vibrational modes of a blade with sufficient precision to be useful in the determination of a control decision that can be computed in real time, an aspect of fundamental importance in dealing with rapid fluctuations in wind conditions.

Yates, North (ORCID:000900052204261X)↗
DOE OSTI2025

Solvent‐Phobic and Ionophilic Carboxylated Polythiophene Layer for Fluoride‐Rich Cathode Electrolyte Interphase

Abstract One focal area of contemporary organic mixed ionic‐electronic conductor (OMIEC) research relates to utilization of dual‐conductive properties to enhance the ion/electron transfer kinetics for energy storage applications. Insight regarding OMIEC response toward the electrolyte anion and solvent used in lithium‐ion batteries (LIBs), however, is limited. Here, for the first time, the solvent‐phobic and ionophilic (SP‐IP) properties of the OMIEC, poly[3‐(potassium‐4‐butanoate)thiophene‐2,5‐diyl] (P3KBT), are revealed through comprehensive evaluation and characterization. The solvent‐phobic characteristics arise from the cooperation of dispersive interaction, polar interaction, and hydrogen‐bonding between P3KBT and electrolyte solvent. The ionophilic nature is driven by electrostatic interactions between P3KBT side chain carboxylate groups and LiPF 6 , and the reversible electrochemical doping/de‐doping of the polythiophene backbone with PF 6 ⁻ . The SP‐IP properties induce formation of a LiF‐ rich , Li 2 CO 3 ‐ limited cathode electrolyte interphase (CEI) layer when a P3KBT coating layer is applied to the active material surface, significantly improving half‐cell life to over 1500 cycles at 2C.

Ren, Haoze [Department of Chemical and Bimolecular↗
DOE OSTI2025

Characterizing laser-heated polymer foams with simultaneous x-ray fluorescence spectroscopy and Thomson scattering at the Matter in Extreme Conditions Endstation at LCLS

Understanding the behavior of polymer foams at high energy density conditions is crucial to advance inertial fusion energy research. Here, we present a new experimental platform designed to measure the thermodynamic state of these materials at megabar pressures. At the Matter in Extreme Conditions Endstation of the Linac Coherent Light Source, we heat samples using an optical, high-intensity, femtosecond laser and dynamically probe them with ultra-short, coherent x-ray pulses of high peak brightness. We perform x-ray Thomson scattering measurements in forward and backward scattering geometries to capture both collective and non-collective electron behavior in the sample. Simultaneously, x-ray fluorescence spectroscopy is used to measure the emission from a mid-Z dopant, providing complementary information on the plasma conditions. By combining these techniques, we obtain temporally resolved temperature measurements of the transient warm dense matter states. Our initial experiments designed to benchmark the platform with carbon samples yielded data resolving the ultrafast response to laser heating with sub-picosecond resolution, measuring plasma temperatures exceeding 50 eV. These findings lay the foundation for precision studies of the dynamic evolution of laser-heated polymer foams.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Performance evaluation of the USGS velocity model for the San Francisco Bay Area

In this study, we evaluated the performance of the United States Geological Survey velocity model developed for the San Francisco Bay Area (SFBA), version 21.1. The evaluation was performed through high-resolution three-dimensional physics-based ground motion simulations of seven small-magnitude earthquakes (ranging from magnitude 3.8 to 4.4) that occurred on the eastern side of the San Francisco Bay. The simulations were performed in the frequency range from 0 to 5 Hz with a minimum shear-wave velocity of 250 m/s, which allowed the capture of wave propagation effects of the near-surface soft materials that characterize local basins. Based on the direct comparison of Fourier amplitude spectra between recorded and simulated ground motions for more than 250 stations, we found that the velocity model generally performs well in the frequency range of 0.2–5 Hz. The median value of the Fourier amplitude residuals was found to be near zero for all seven earthquakes. The slight over-prediction of 0.2 log-natural units at frequencies above 3 Hz in our simulations was attributed to the potentially inaccurate representation of the source radiation pattern by a double-couple point source model, and simple representation of shallow small-scale underground structural complexity in the velocity model. Maps of spectral amplitude differences between the simulated and recorded data were used to identify areas responsible for systematic ground motion over-predictions or under-predictions. For example, while some sub-domains over soft sediments show over-prediction patterns, the block east of the Hayward fault is prone to exhibit patterns of under-prediction. These maps can be used to guide future refinements of the SFBA velocity model. Since our simulation methodology allows for the decoupling of the source and wave propagation effects, the ground motion data generated by our simulations can also be used to quantify the epistemic uncertainty due to the velocity model, in empirically based ground motion estimates for the SFBA.

58 GEOSCIENCES↗
DOE OSTI2025

Self‐Healable Poly(ionic liquid) Copolymers Driven by Polar and Dipolar Forces

Abstract Commodity aliphatic and aromatic acrylic‐based copolymers self‐heal due to ubiquitouskey‐and‐lock,ring‐and‐lock, andfluorophilic‐σ‐lockvan der Waals (vdW) interactions. However, the role of these interactions in the presence of covalently copolymerized ionic liquid (IL) is not known. This study is driven by the hypothesis that covalently incorporated cation–anion pairs to form poly(ionic liquid) copolymers (PILCs) can perturb inter‐ or intra‐chain vdW interactions reflected in mechanical and electrical responses. To test this hypothesis, we synthesized a series of PILCs comprising of pentafluorostyrene (PFS) and imidazolium‐based IL monomers with variable‐length aliphatic tails (methyl and butyl). Using a combination of 2D 1 H‐ 1 H and 19 F ‐ 19 F NOESY NMR and FTIR measurements supplemented by molecular dynamic (MD) simulations, these studies demonstrate that preferentially alternating/random PILCs topologies facilitate self‐healing. The introduction of cation–anion moieties modifies thefluorophilic‐σ‐lockinteractions and, along with longer aliphatic tails ─(CH 2 ) 3 CH 3 covalently attached to the imidazolium cation, enhances cation‐anion mobility, thus faster recovery from mechanical damage occurs. These findings underline how precise control over dipolar and ionic interactions through copolymer composition enables self‐healing in PILCs. These insights may open pathways for designing sustainable, mechanically resilient materials for applications in energy storage and energy harvesting.

Chemistry↗
DOE OSTI2024

Interplay of pressure and temperature in modulating the magnetic properties of Cr 2 O 3

The spin-lattice interaction is pivotal in tailoring materials properties and is crucial for developing novel spintronic devices. Here, in the current work, we aim to explore the effects of pressure and temperature on the magnetic properties of Cr 2 O 3 to gain insights into its spin-lattice interaction. Through high-pressure neutron diffraction experiments, we observed an enhancement of the magnetic Bragg intensity with increasing pressure and it becomes more pronounced as the temperature increases. Results from first-principles calculations reveal a strengthening of the easy-axis magnetic anisotropy, doubling from 0 to 20 GPa. The exchange parameters, calculated based on this spin orientation, show an enhancement of the dominant magnetic interactions and an increase of magnetic ordering temperature when pressure increases. These findings suggest that the contributions from these two mechanisms are responsible for the observed increase in magnetic Bragg intensity.

Cr2O3↗
DOE OSTI2025

Electrochemically in situ formed rocksalt phase in titanium dioxide determines pseudocapacitive sodium-ion storage

Earth-abundant TiO 2 is a promising negative electrode for low-cost sodium-ion batteries (SIBs) owing to its high capacity, rapid (dis)charging capability, safe operation potential and nonflammability. Crystalline anatase TiO 2 is not suitable for reversible Na + (de)intercalation, but it displays pseudocapacitive response after repeated cycles. Herein, we find and demonstrate that ordered rocksalt (RS) NaTiO 2 nanograins are in situ formed by electrochemically cycling with Na + ions in anatase and amorphous TiO 2 . The in situ formed RS-NaTiO 2 follows a solid-solution reaction with small volume changes of only 2.0%, that determines the pseudocapacitive “mirror-like” cyclic voltammetry curve with a couple of broad redox peaks at 0.75 V vs. Na + /Na, a high capacity of 253 mAh g −1 , high-rate capability and thousands of stable cycles. The multistep crystalline-to-amorphous-to-RS transformations are able to be electrochemically activated during the aging process of assembled full cells. Our finding provides a direction for developing unconventional Ti-based high-performance active materials for SIBs with both high energy and power densities.

Tang, Dafu [Xiamen University (China); Innovation ↗
DOE OSTI2025

Intelligent Manufacturing Support: Specialized LLMs for Composite Material Processing and Equipment Operation

Engineering educational curriculum and standards cover many material and manufacturing options. However, engineers and designers are often unfamiliar with certain composite materials or manufacturing techniques. Large language models (LLMs) could potentially bridge the gap. Their capacity to store and retrieve data from large databases provides them with a breadth of knowledge across disciplines. However, their generalized knowledge base can lack targeted, industry-specific knowledge. To this end, we present two LLM-based applications based on the GPT-4 architecture: (1) The Composites Guide: a system that provides expert knowledge on composites material and connects users with research and industry professionals who can provide additional support and (2) The Equipment Assistant: a system that provides guidance for manufacturing tool operation and material characterization. By combining the knowledge of general AI models with industry-specific knowledge, both applications are intended to provide more meaningful information for engineers. In this paper, we discuss the development of the applications and evaluate it through a benchmark and two informal user studies. The benchmark analysis uses the Rouge and Bertscore metrics to evaluate our models’ performance against GPT-4o. The results show that GPT-4o and the proposed models perform similarly or better on the ROUGE and BERTScore metrics. The two user studies supplement this quantitative evaluation by asking experts to provide qualitative and open-ended feedback about our model’s performance on a set of domain-specific questions. The results of both studies highlight a potential for more detailed and specific responses with the Composites Guide and the Equipment Assistant.

Kapoor, Gunnika [Oak Ridge National Laboratory (OR↗
DOE OSTI2026

Probing multi-dimensional composition spaces in search of strong metallic alloys

Refractory complex concentrated alloys (RCCA) offer exceptionally high-temperature strength compared to pure metals and dilute alloys, but predictive theory for RCCA design is lacking. We present large-scale molecular Dynamics (MD) simulations of crystal plasticity to explore alloy compositions for maximum mechanical strength, focusing on Fe-Ta-W and Nb-Ta-Mo-W alloy families modeled with Embedded Atom Model (EAM) and Spectral Neighbor Analysis Potentials (SNAP). To efficiently guide the search for strong alloy compositions, we employ iterative optimization using Gaussian process regression. Many simulated RCCA compositions exhibit pronounced cocktail strengthening, with strengths surpassing their strongest constituent metal, tungsten. Contrary to expectations, the highest strength is found on binary edges of the RCCA composition space. Detailed analyses of atomistic simulations reveal that, similar to pure BCC metals, plastic response in RCCA is primarily governed by screw dislocations. However, at large strains, dislocation multiplication and interactions (Taylor hardening) become the dominant mechanisms contributing to RCCA strength.

Materials science↗