Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Magnetic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Temperature-Dependent Magnetic Properties of Magnetorheological Elastomers

We report on an investigation of the temperature-dependent magnetic properties of magnetorheological elastomers (MREs). These are a class of composites that consist of magnetically permeable particles dispersed in a nonmagnetic polymeric matrix. Under the application of an external magnetic field, a large deformation occurs altering the mechanical properties of these materials. Due to their magnetoelastic coupling response, these materials are finding an increasing interest among the scientific community. These polymer-based composites’ performance depends on many factors, which temperature is one of the biggest influencing factors requiring further investigation. In this work, the magnetic properties of isotropic and anisotropic polyurethane-based MRE with different iron (Fe) particle loading fractions (50, 60, 70, and 80% by weight) were investigated under different temperatures. From the analysis, the magnetization curves of these materials are observed to overlap for the different measured temperature values. The variation of various magnetic properties including saturation magnetization and differential susceptibility with temperature was also determined. Furthermore, the results show ~ 2.5% decrement in the saturation magnetization for each of the loading fractions, between the lowest (300K) and the highest (400K) measured temperature. On the other hand, the initial differential susceptibility exhibits different trends with increasing temperature. Generally, the magnetization response of these materials is seen to be only slightly sensitive to temperature changes. Additionally, the magnetization response is observed to be highly dependent on particle loading fractions and particle orientation within the elastomer.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Emerging magnetic materials for electric vehicle drive motors

Abstract Increasing demand for electric vehicles (EVs) is increasing demand for the permanent magnets that drive their motors, as approximately 80% of modern EV drivetrains rely on high-performance permanent magnets to convert electricity into torque. In turn, these high-performance permanent magnets rely on rare earth elements for their magnetic properties. These elements are “critical” (i.e., at risk of limiting the growth of renewable energy technologies such as EVs), which motivates an exploration for alternative materials. In this article, we overview the relevant fundamentals of permanent magnets, describe commercialized and emerging materials, and add perspective on future areas of research. Currently, the leading magnetic material for EV motors is Nd 2 Fe 14 B, with samarium-cobalt compounds (SmCo 5 and Sm 2 Co 17 ) providing the only high-performing commercialized alternative. Emerging materials that address criticality concerns include Sm 2 Fe 17 N 3 , Fe 16 N 2 , and the L1 0 structure of FeNi, which use lower cost elements that produce similar magnetic properties. However, these temperature-sensitive materials are incompatible with current metallurgical processing techniques. We provide perspective on how advances in low-temperature synthesis and processing science could unlock new classes of high-performing magnetic materials for a paradigm shift beyond rare earth-based magnets. In doing so, we explore the question: What magnetic materials will drive future EVs? Graphical abstract

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2023

Soliton formation and topology manipulation of coupled spins via ultrafast re-magnetization

The major goal of the project was to explore the properties of magnetic order driven far out of equilibrium by optical excitations. These include fundamental questions related to the interplay of magnetic, structural and electronic degrees of freedom in materials that are optically excited. These problems break down in short term quenching of the magnetization as a results of the energy of the optical pulse studying how the energy of the optical pulse and the angular momentum of the magnetization flow between the different degrees of freedom. This is followed by the longer time re-emergence of the magnetism as the system cools. Within this goal we explored the formation of solitons, both with and without non-trivial topology, via rapid re-magnetization processes after optical-driven ultrafast demagnetization. Guided by theory, we predict that turbulence and modulational instabilities will drive the formation of solitons, including dispersive shock waves, magnon droplets, and skyrmions. In the case of topological defect formation, i.e. skyrmion generation, related processes have long been predicted based on general principles of symmetry-breaking phase transitions; the density of topological defects in a long-range-ordered phase can be controlled by varying the quench rate through the second-order phase transition, i.e. the Kibble-Zurek (KZ) mechanism. We, more broadly, had the goal to study a range of other emergent magnetic behaviors after optical excitation. While great attention has been given to ultrafast demagnetization, less is known of the subsequent spin dynamics and coupling to the lattice. What is increasingly appreciated is that ultrafast demagnetization leads to spin currents that can carry angular momentum from the rapidly demagnetized sample. These spin currents appear in many ways but fundamentally controls demagnetization, drives interactions between regions of the material, and control the spin resulting structure. They can be probed many ways including THz emission which, in turn, gives insight into the demagnetization processes. Simultaneously if there is magneto-elastic coupling ultrafast demagnetization can drive structural excitations that are not expected from thermal energy added to the lattice. We explored a range of complex phenomena that arise from photo-excitation of magnetic systems with the coupling of electronic, magnetic and structural degrees of freedom. We have made a number of fundamental discoveries that are reflected in our publications list with additional work still being prepared for publication. Highlights of this work include (i) ultra-efficient, nonlinear THz surface acoustics (ii) spin-current-mediated rapid magnon localization and coalescence, (iii) spin-wave soliton formation in ferromagnetic FePt nanoparticles, (iv) dynamic phonon coupling in elemental antiferromagnetic Cr, (v) THz emission from Co/Pt bilayers and FeRh/Pt bilayers, (vi) theoretical investigation of spin hydrodynamics, solitons and shock waves, and (vii) ultrafast perturbation of magnetic domains by optical pumping.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Deflection of Plasma by High Magnetic Fields at Variable Pressures (Final Report)

The goal of the proposed work is to study the deflection of plasma by high magnetic fields using the high uniform magnetic field of the Magnetized Dusty Plasma Experiment (MDPX) located at the Magnetized Plasma Research Laboratory (MPRL) at Auburn University. The proposal team consists of faculty from the University of Alabama in Huntsville (UAH). One of the motivations for this work is to study the concept of a magnetic nozzle for pulsed fusion propulsion. Fusion propulsion can provide extremely high specific impulse, >30,000 sec, for fuel-efficient and thus mass-efficient trips to other planets. One such fusion propulsion design of interest in this research is the Pulsed Fission-Fusion (PuFF) concept. PuFF uses a Z-pinch device to create a fusion reaction at the back of the spacecraft inside the magnetic nozzle. As the resulting plasma explosion is isotropic, a large portion of the momentum will be directed toward the ship and needs to be redirected to efficiently produce thrust. The magnetic nozzle is thus necessary to redirect or deflect the plasma from an isotropic expansion into the directed thrust. Thus, the pulsed-fusion propulsion nozzle is herein referred to as a deflection magnetic nozzle, as opposed to the more traditional and well-studied accelerating magnetic nozzle. The purpose of this project was thus to study the behavior of a plasma in the MDPX fields to better understand the plasma-field interactions and how it could lead to deflection and a pulsed fusion magnetic nozzle.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Emerging magnetic materials for electric vehicle drive motors [Slides]

Increasing demand for electric vehicles (EVs) is increasing demand for the permanent magnets that drive their motors, as approximately 80% of modern EV drivetrains rely on high-performance permanent magnets to convert electricity into torque. In turn, these high-performance permanent magnets rely on rare earth elements for their magnetic properties. These elements are "critical" (i.e., at risk of limiting the growth of renewable energy technologies such as EVs), which motivates an exploration for alternative materials. In this article, we overview the relevant fundamentals of permanent magnets, describe commercialized and emerging materials, and add perspective on future areas of research. Currently, the leading magnetic material for EV motors is Nd 2 Fe 14 B, with samarium-cobalt compounds (SmCo 5 and Sm 2 Co 17 ) providing the only high-performing commercialized alternative. Emerging materials that address criticality concerns include Sm 2 Fe 17 N 3 , Fe 16 N 2 , and the L10 structure of FeNi, which use lower cost elements that produce similar magnetic properties. However, these temperature-sensitive materials are incompatible with current metallurgical processing techniques. We provide perspective on how advances in low-temperature synthesis and processing science could unlock new classes of high-performing magnetic materials for a paradigm shift beyond rare earth-based magnets. In doing so, we explore the question: What magnetic materials will drive future EVs?

42 ENGINEERING↗
DOE OSTI2024

Coercivity of (Fe 0.7 Co 0.3 ) 2 B Nanowire and Its Bonded Magnet

(Fe 0.7 Co 0.3 ) 2 B are potential permanent magnets material due to its large saturation magnetization and high Curie temperature. However, it has moderate magnetocrystalline anisotropy (MCA) and low coercivity. One way to improve its coercivity is to combine the contributions from magnetocrystalline- and magnetic-shape anisotropy by preparing (Fe 0.7 Co 0.3 ) 2 B nanowires. We study the effects of size, morphology, and surface defects on the hard magnetic properties of nanowires using micromagnetic simulation. The hard magnetic properties of (Fe 0.7 Co 0.3 ) 2 B nanowire-bonded magnets are estimated, including the role of inter-wire magnetostatic interaction. By considering the existence of local reductions in MCA energy of up to 30% on the surface layer of nanowires, the anisotropic bonded magnet with a 65% vol. of (Fe 0.7 Co 0.3 ) 2 B nanowires would have typical remanence, B r = 7.6–8.4 kG, coercivity, H ci = 9.6–9.9 kOe, and maximum energy product, (BH) m = 14–17.8 MGOe. Developing effective technology for synthesizing nanowires and fabricating corresponding bonded magnets is promising for manufacturing practical magnets based on the magnetic phase with a relatively low or moderate MCA, such as (Fe 0.7 Co 0.3 ) 2 B.

36 MATERIALS SCIENCE↗
NASA NTRS2014

The MAVEN Magnetic Field Investigation

The MAVEN magnetic field investigation is part of a comprehensive particles and fields subsystem that will measure the magnetic and electric fields and plasma environment of Mars and its interaction with the solar wind. The magnetic field instrumentation consists of two independent tri-axial fluxgate magnetometer sensors, remotely mounted at the outer extremity of the two solar arrays on small extensions ("boomlets"). The sensors are controlled by independent and functionally identical electronics assemblies that are integrated within the particles and fields subsystem and draw their power from redundant power supplies within that system. Each magnetometer measures the ambient vector magnetic field over a wide dynamic range (to 65,536 nT per axis) with a quantization uncertainty of 0.008 nT in the most sensitive dynamic range and an accuracy of better than 0.05%. Both magnetometers sample the ambient magnetic field at an intrinsic sample rate of 32 vector samples per second. Telemetry is transferred from each magnetometer to the particles and fields package once per second and subsequently passed to the spacecraft after some reformatting. The magnetic field data volume may be reduced by averaging and decimation, when necessary to meet telemetry allocations, and application of data compression, utilizing a lossless 8-bit differencing scheme. The MAVEN magnetic field experiment may be reconfigured in flight to meet unanticipated needs and is fully hardware redundant. A spacecraft magnetic control program was implemented to provide a magnetically clean environment for the magnetic sensors and the MAVEN mission plan provides for occasional spacecraft maneuvers - multiple rotations about the spacecraft x and z axes - to characterize spacecraft fields and/or instrument offsets in flight.

Magnetic↗
NASA NTRS2015

A Comparative Analysis of the Magnetic Field Signals over Impact Structures on the Earth, Mars and the Moon

An improved description of magnetic fields of terrestrial bodies has been obtained from recent space missions, leading to a better characterization of the internal fields including those of crustal origin. One of the striking differences in their crustal magnetic field is the signature of large impact craters. A comparative analysis of the magnetic characteristics of these structures can shed light on the history of their respective planetary-scale magnetic dynamos. This has motivated us to identify impact craters and basins, first by their quasi-circular features from the most recent and detailed topographic maps and then from available global magnetic field maps. We have examined the magnetic field observed above 27 complex craters on the Earth, 34 impact basins on Mars and 37 impact basins on the Moon. For the first time, systematic trends in the amplitude and frequency of the magnetic patterns, inside and outside of these structures are observed for all three bodies. The demagnetization effects due to the impact shock wave and excavation processes have been evaluated applying the Equivalent Source Dipole forward modeling approach. The main characteristics of the selected impact craters are shown. The trends in their magnetic signatures are indicated, which are related to the presence or absence of a planetary-scale dynamo at the time of their formation and to impact processes. The low magnetic field intensity at center can be accepted as the prime characteristic of a hypervelocity impact and strongly associated with the mechanics of impact crater formation. In the presence of an active internal field, the process of demagnetization due to the shock impact is associated with post-impact remagnetization processes, generating a more complex magnetic signature.

Earth↗
NASA NTRS2019

Magnet Architectures and Active Radiation Shielding Study (MAARSS)

This report describes the analysis of several magnetic radiation shield architectures and the spacecraft systems associated with them, such as quench detection, thermal management, and compensation coils. This work was performed as part of the NASA Institute of Advanced Concepts (NIAC) Grant Phase II effort. Because radiation exposure during long duration space missions poses a significant risk for crewed space-flight, Advanced Magnetic Lab, Inc. (AML) and NASA are studying magnetic radiation shielding, which may generate low-mass protection. Recent technological developments in high-temperature superconducting technology suggest the possibility of such shielding. This report analyzes some of the technical difficulties involved in such a system and identifies technology areas where further investment would be warranted. Most analysis was performed on a baseline configuration (8-meter diameter coils, with 1 tesla field). However, a baseline design with an expandable coil configuration (16 meter diameter coils, 1.5 tesla field) has a significant potential to increase shielding efficiency. The magnetic forces on the magnetic shield's components are large enough to require detailed structural design. Analysis of the thermal structural response of a yttrium-barium-copper-oxide (YBCO) high-temperature, superconducting (HTS) tape in a large-scale solenoid magnet showed that structural and thermal performance improved by replacing Hastelloy® with graphene in the tape. Integrating graphene into the high-strength fiber (HSF) support structure brings even greater benefits. The energy stored in a shield system's magnetic field must be safely dissipated if a quench-type failure occurs. Analysis of quench detection by fiber-optic thermal sensing and improvement of quench characteristics using graphene showed quench is manageable. Low-temperature superconductors can quench when subjected to movement, but lab tests of coil expansion testing showed that HTS materials do not quench when subject to the movement associated with coil expansion. Compensation coils are necessary to reduce the magnetic field in the crew habitat. Analysis showed that subdividing the compensation coil into individually controlled sections allows for a robust, adjustable system. AML analyzed the forces on an approaching capsule that were a result of eddy currents in its structure induced by its motion through the magnetic field from the coils. AML also analyzed coil-to-coil forces. Thermal control to maintain the HTS material at a suitable temperature is challenging. The sunshield technology review revealed a greater possibility of thermal insulation of the coils and use of passive cooling. The availability of suitable cryocoolers was also reviewed. A parametric graph estimating mass and shielding effectiveness for strength and thickness was developed, and allows spacecraft designers to assess the tradeoffs of using a magnetic radiation shield.

Spacecraft↗
NASA NTRS2022

The Effects of Surface Fossil Magnetic Fields on Massive Star Evolution: IV. Grids of Models at Solar, LMC, and SMC Metallicities

Magnetic fields can drastically change predictions of evolutionary models of massive stars via mass-loss quenching, magnetic braking, and efficient angular momentum transport, which we aim to quantify in this work. We use the MESA software instrument to compute an e xtensiv e main-sequence grid of stellar structure and evolution models, as well as isochrones, accounting for the effects attributed to a surface fossil magnetic field. The grid is densely populated in initial mass (3–60 M ), surface equatorial magnetic field strength (0–50 kG), and metallicity (representative of the Solar neighbourhood and the Magellanic Clouds). We use two magnetic braking and two chemical mixing schemes and compare the model predictions for slowly rotating, nitrogen- enriched (‘Group 2’) stars with observations in the Large Magellanic Cloud. We quantify a range of initial field strengths that allow for producing Group 2 stars and find that typical values (up to a few kG) lead to solutions. Between the subgrids, we find notable departures in surface abundances and evolutionary paths. In our magnetic models, chemical mixing is al w ays less efficient compared to non-magnetic models due to the rapid spin-down. We identify that quasi-chemically homogeneous main sequence evolution by efficient mixing could be prevented by fossil magnetic fields. We recommend comparing this grid of evolutionary models with spectropolarimetric and spectroscopic observations with the goals of (i) revisiting the derived stellar parameters of known magnetic stars, and (ii) observationally constraining the uncertain magnetic braking and chemical mixing schemes.

stars: abundances↗
DOE OSTI2023

Interplay of structure and magnetism in LuFe 4 ⁢Ge 2 tuned by hydrostatic pressure

Lu⁢Fe 4 ⁢Ge 2 crystallizes in the Zr⁢Fe 4 ⁢Si 2 -type structure, hosting chains of Fe tetrahedra giving rise to geometric frustration and low dimensionality. The compound orders antiferromagnetically at around 36 K accompanied by a simultaneous structural transition from a tetragonal phase to an orthorhombic phase. The hydrostatic pressure dependence of the magnetic and structural transitions is investigated using electrical transport, AC magnetic susceptibility, AC calorimetry, M⁢össbauer, muon-spin relaxation (μ⁢SR), and x-ray-diffraction measurements. External pressure suppresses the first-order transition to the antiferromagnetic phase (AFM1) around 1.8 GPa. The structural transition is largely unaffected by pressure and remains between 30 to 35 K for pressures up to 2 GPa. A second antiferromagnetic phase (AFM2) is observed at higher pressures. The transition from the paramagnetic to the AFM2 phase is of second-order nature and appears to be connected to the structural transition. The magnetic volume fraction obtained from μ⁢SR and M⁢össbauer measurements reveal that the entire sample undergoes magnetic ordering in both magnetic phases. In addition, similar low-temperature muon-precession frequencies in AFM1 and AFM2 phases point at similar ordered moments and magnetic structures in both phases. Our results further indicate enhanced magnetic fluctuations in the pressure-induced AFM2 phase. The experimental observations together with density functional theory calculations suggest that the magnetic- and structural-order parameters in Lu⁢Fe 4 ⁢Ge 2 are linked by magnetic frustration, causing the simultaneous magnetostructural transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Magnetic properties of a spin-orbit entangled $J_{eff}$ = $\frac{1}{2}$ honeycomb lattice

The interplay between spin-orbit coupling, anisotropic magnetic interaction, frustration-induced quantum fluctuations, and spin correlations can lead to novel quantum states with exotic excitations in rare-earth-based quantum magnets. Herein, we present the crystal structure, magnetization, electron spin resonance (ESR), specific heat, and nuclear magnetic resonance (NMR) experiments on the polycrystalline samples of $\mathrm{Ba_9}$$\mathrm{Yb_2}$$\mathrm{Si_6}$$\mathrm{O_{24}}$, in which $\mathrm{Yb^{3+}}$ ions form a perfect honeycomb lattice without detectable antisite disorder. The magnetization data reveal antiferromagnetically coupled spin-orbit entangled $J_{eff}$ = $\frac{1}{2}$ degrees of freedom of $\mathrm{Yb^{3+}}$ ions in the Kramers doublet state. The ESR measurements reveal that the first excited Kramers doublet is 32.3(7) meV above the ground state. The specific heat results suggest the absence of any long-range magnetic order in the measured temperature range. Furthermore, the $\mathrm{^{29}Si}$ NMR results do not indicate any signature of magnetic ordering down to 1.6 K, and the spin-lattice relaxation rate reveals the presence of a field-induced gap that is attributed to the Zeeman splitting of the Kramers doublet state in this quantum material. Here, our experiments detect neither spin freezing nor long-range magnetic ordering down to 1.6 K. The current results suggest the presence of short-range spin correlations in this spin-orbit entangled $J_{eff}$ = $\frac{1}{2}$ rare-earth magnet on a honeycomb lattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Synthesis and magnetic properties of the Shastry-Sutherland family R 2 Be 2 SiO 7 ( R = Nd , Sm , Gd-Yb )

Compounds forming the quasi-two-dimensional Shastry-Sutherland lattice (SSL) have attracted significant experimental and theoretical attention in the field of frustrated magnetism. This is primarily due to their realization of an exactly soluble J 1 –J 2 orthogonal dimer model capable of hosting magnetic order, dimer singlet, and plaquette singlet phases in zero applied field and their complex magnetic phase diagrams with fractional magnetization plateaus and possible superfluid and supersolid phases found between the plateau states. The discovery and characterization of SSL compounds based on rare-earth magnetic ions provide a direct route to study the stability and properties of these exotic magnetic phases in systems with a variety of different magnetic anisotropies. In this paper, we discuss the synthesis and magnetic characterization of polycrystalline samples of the R 2 ⁢Be 2 ⁢SiO 7 family, where R=Nd, Sm, and Gd-Yb. All family members crystallize in the space group $P\bar{⁢4}⁢2_1⁢m$ (113) and show no signs of long-range magnetic order above 2 K, except for R=Tb which orders antiferromagnetically at 2.6 K.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Site Mixing for Engineering Magnetic Topological Insulators

The van der Waals compound, MnBi 2 Te 4 , is the first intrinsic magnetic topological insulator, providing a materials platform for exploring exotic quantum phenomena such as the axion insulator state and the quantum anomalous Hall effect. However, intrinsic structural imperfections lead to bulk conductivity, and the roles of magnetic defects are still unknown. With higher concentrations of the same types of magnetic defects, the isostructural compound MnSb 2 Te 4 is a better model system for a systematic investigation of the connections among magnetism, topology, and lattice defects. In this work, the impact of antisite defects on the magnetism and electronic structure is studied in MnSb 2 Te 4 . Mn-Sb site mixing leads to complex magnetic structures and tunes the interlayer magnetic coupling between antiferromagnetic and ferromagnetic. The detailed nonstoichiometry and site mixing of MnSb2Te4 crystals depend on the growth parameters, which can lead to ≈40% of Mn sites occupied by Sb and ≈15% of Sb sites by Mn in as-grown crystals. Single-crystal neutron diffraction and electron microscopy studies show nearly random distribution of the antisite defects. Band structure calculations suggest that the Mn-Sb site mixing favors a ferromagnetic interlayer coupling, consistent with experimental observation, but is detrimental to the band inversion required for a nontrivial topology. Overall, our results suggest a long-range magnetic order of Mn ions sitting on Bi sites in MnBi 2 Te 4 . The effects of site mixing should be considered in all layered heterostructures that consist of alternating magnetic and topological layers, including the entire family of MnTe(Bi 2 Te 3 )n, its Sb analogs, and their solid solution.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Redesign of the Coils for the 60T Controlled-Waveform Magnet at NHMFL

Driven by the1.4 GW generator, the 60T Controlled Waveform (60 TCW) magnet was the most powerful controlled waveform system in the world and had always been one of most important magnets to the National High Magnetic Field (NHMFL) and high-field research community because of its following unique features: (1) quasi-static field up to 60 T with 100 ms flat-top and total pulse-length of about 2000 ms, (2) variable magnetic field waveforms such as staircase and triangle with flat-top (3) relative large bore (32 mm) and (4) very fast cooling time (20 minutes) between pulses [Boebinger, 2001], [Crooker et al. 2001]. The magnet is composed of nine concentric coils, with each coil consisting of several conductor winding layers reinforced by a high-strength metallic shell. The magnet underwent a catastrophic failure in 2000 and all the coils had to be rebuilt. In late 2014 the second magnet version failed near the mid-plane of coil 7. The simulations afterward that incident indicated that the overall strength of the coil would be increased by replacing a section of the reinforcing shell with Zylon fiber-epoxy composite. This reduces the stress and thus significantly lowers the level of plastic deformation in the windings. The role of the metal and Zylon fiber reinforcing layers in bearing the axial and radial Lorentz forces has been studied to optimize the magnet design. Here, the results of the optimization will be discussed as well as challenges that have been presented in rebuilding the individual coils of the magnet.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Thermal stability of anisotropic bonded magnets prepared by additive manufacturing

Abstract In this research, anisotropic NdFeB + SmFeN hybrid and NdFeB bonded magnets are additively printed in a polyphenylene sulfide (PPS) polymer binder. Printed NdFeB + SmFeN PPS bonded magnets displayed excellent magnetic properties ( B r [remanence] = 6.9 kG [0.69 T], H cj [coercivity] = 8.3 kOe [660 kA/m], and BH max [energy product] = 9.9 MGOe [79 kJ/m 3 ]) with superior corrosion resistance and thermal stability. The anisotropic NdFeB bonded magnet shows a high coercivity of 14.6 kOe (1162 kA/m) with a BH max of 8.7 MGOe (69 kJ/m 3 ). The coercivity and remanence temperature coefficients for NdFeB + SmFeN hybrid bonded magnets are −0.10%/K and −0.46%/K, and for NdFeB bonded magnets are −0.14%/K and −0.53%/K in the range of 300–400 K, indicating that the hybrid bonded magnets are thermally stable. The average flux aging loss for hybrid magnets was also determined to be very stable over 2000 h at 448 K (175°C) in air with 2.04% compared to that of NdFeB magnets with 3.62%.

thermal stability↗
DOE OSTI2024

Exploring magnetic anisotropy and robustness of the J eff = 1/2 state under substantial orthorhombic distortion in Sr 2 IrO 4 thin films

Here, we present a comprehensive study revealing the intricate interplay of the magnetic anisotropy and orthorhombic distortion in thin films of Sr 2 IrO 4 through a Ca 3 Ru 2 O 7 substrate. By inducing a pronounced orthorhombic distortion along the direction of oxygen octahedral edges, we effectively modulated the uniaxial magnetic anisotropy in the system. Remarkably divergent responses along the easy and hard magnetic axes were unveiled through x-ray magnetic circular dichroism (XMCD) measurements under magnetic fields. Specifically, the spin flop transition observed when the magnetic field aligns with the hard axis allows us to estimate the magnetic anisotropy energy, which is around 14.2 µeV, close to that estimated from the single magnon peak measured via Raman spectroscopy. The observed anisotropy energy remains notably lower than the linear estimates derived from the strain-anisotropy energy relationship outlined in H.-H. Kim et al., Nat. Commun. 13, 6674 (2022). This underscores the enduring preservation of the isotropic character of the J eff = 1/2 states. This is also supported by the negligible XMCD intensity ratio at the L 2 edge compared to that of the L 3 edge. Furthermore, the branching ratio determined from x-ray absorption spectroscopy shows that the expectation value of the spin-orbit coupling is similar to that of bulk Sr 2 IrO 4 single crystals. Our findings indicate that even under a substantial anisotropic biaxial distortion, Sr 2 IrO 4 remains remarkably proximate to the J eff = 1/2 state. This study not only provides valuable information in understanding the interplay between magnetic anisotropy and strain but also the robustness of the J eff = 1/2 state under octahedral distortion within materials exhibiting emergent quantum phenomena.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Terrace‐Edge‐Induced Domain Nucleation in Room‐Temperature 2D Magnetic Van Der Waals Heterostructures

Abstract Terrace‐edges, which are step‐like height discontinuities formed during layer stacking or exfoliation, can locally modify magnetic characteristics. Magnetic domain behavior and its structural dependence in a 2D van der Waals (vdW) heterostructure composed of two distinct room‐temperature ferromagnets: Fe 3 GaTe 2 , an intrinsic vdW ferromagnet, and vanadium‐doped WSe 2 , a transition metal dichalcogenide exhibiting defect‐induced magnetism, is investigated. Using magnetic transmission X‐ray microscopy, the formation and annihilation of magnetic domains are directly observed and it is found that domains preferentially form at terrace‐edges of the heterostructure. Micromagnetic simulations reveal that in‐plane magnetization tilting near the terrace‐edge results in a localized maximum in total magnetic energy that promotes domain formation. The findings highlight the significant role of structural edge features and interfacial magnetic interactions in determining domain formation in hybrid 2D vdW magnetic systems, offering a new route to spatially controlled magnetization at room temperature.

Lee, Jieun↗