Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAINE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

A flight investigation of performance and loads for a helicopter with 10-64C main rotor blade sections

A flight investigation produced data on performance and rotor loads for a teetering rotor, AH-1G helicopter flown with a main rotor that had the NLR-1T airfoil as the blade section contour. The test envelope included hover, forward flight speeds from 34 to 83 m/sec (65 to 162 knots), and collective fixed maneuvers at about 0.25 tip speed ratio. The data set for each test point describes vehicle flight state, control positions, rotor loads, power requirements, and blade motions. Rotor loads are reviewed primarily in terms of peak to peak and harmonic content. Lower frequency components predominated for most loads and generally increased with increased airspeed, but not necessarily with increased maneuver load factor. Detailed data for an advanced airfoil on an AH-1G are presented.

Morris, C. E. K.↗

Status of Space Shuttle External Tank Solid Rocket Booster and Main Engine

The current status of three major propulsion elements for the Space Transportation System is reviewed: the Space Shuttle Main Engine, the External Tank, and the Solid Rocket Booster. Consideration is given to test and manufacturing experience in the last year, test and manufacturing plans for the coming year, and the current status of the hardware to support the first manned orbital flight.

Lindstrom, R. E.↗

A source for the geomagnetic storm main phase ring current

The paper considers a proposed source for the geomagnetic storm main phase ring current. It is shown that the flux increases of trapped ions and electrons observed by Explorer 45 at L below 4 during two large geomagnetic storms can be explained by inward radial displacement of the preexisting trapped particle distribution. The proposed source requires only the acceleration of the previously entrapped particle population by inward displacement under conservation of the first two adiabatic invariants. It is suggested that a significant difference between large geomagnetic storms and typical substorm activity may be the inward convection occurring over a large longitude range during storms, but only over a small longitude range during typical substorms.

Lyons, L. R.↗

Rotordynamics analysis of the Space Shuttle main engine high-pressure oxidizer pump

This study describes the rotordynamics analysis of the Space Shuttle Main Engine (SSME) high-pressure oxidizer turbopump. Modal synthesis methods were used to account for the complex coupling of the pump and engine structure. Cross-coupling elements effecting rotor stability were included in the analysis. Results of the analysis indicated that smaller bearing clearances and a smooth turbine interstage seal would result in longer bearing life and improved stability. Subsequent testing with these design features has shown the same results.

Rowan, B. F.↗

Investigation of the fuel feed line failures on the Space Shuttle main engine

The Space Shuttle Main Engine (SSME) development program experienced two similar appearing fuel feed line failures during the shutdown portion of two engine tests. Failure investigations into each incident showed that a few cycles of high-amplitude transient strain occurring during the start and cutoff portions of each test could have either accumulated damage and led to a fatigue failure after 46 tests, or caused rupture in a low-strength weld joint. The cause of the high strain was traced to a period of unsteady flow separation during the start and cutoff of each test coincident with the oblique shock approaching the nozzle exit. Since elimination of the flow separation was impractical, the steps taken to allow engine development and flight preparations to continue were: (1) establish the safe operating life of the nozzle, (2) reinforce all low-strength welds, and (3) eliminate the use of thin-wall fuel feed lines. In parallel, the feed line was redesigned and fabrication was initiated on units to be incorporated into the development program.

Larson, E. W.↗

Granulation in a main-sequence F-type star

The modal approach developed by Nelson and Musman (1977) is used to investigate convection in an F-type main-sequence star (effective temperature of 7300 K, g = 10,000 cm per sec per sec). The convective velocities and intensity contrasts are found to be larger than in the sun. Even though the convective flux is less than 1% of the total flux at a mean optical depth of unity, the spectral-energy distribution is strongly reddened as a result of the fluctuating opacity. This has important implications in the conversion scale from observed colors to effective temperature. The scale of the surface granulation is expected to be in the range 1000-5000 km. Calculations of the combined H-He I and He II convection zones support the prediction of Toomre et al. (1976) that the stable region between the zones is well mixed

Nelson, G. D.↗

Space Shuttle Main Engine

Significant features of the Space Shuttle Main Engine (SSME) include a staged combustion power cycle developing chamber pressure in excess of 3000 psia, high area ratio nozzle expansion, throttling capability, and a computer-operated engine control system. This paper examines the current status of the SSME with attention given to engine performance, system characteristics, and test results. A comparison of the SSME development and certification programs with engines successfully used in the Saturn Program is presented.

Thompson, J. R., Jr.↗

Fluid dynamic analysis of the space shuttle main engine high pressure oxidizer turbopump slinger seal

The details of the flow on the bladed side of a centrifugal type dynamic shaft seal utilized to contain liquid oxygen in the Space Shuttle Main Engine high pressure oxidizer turbopump were clarified. The governing equations are solved to predict the pressure and temperature gradients and to aid in investigating the nature of the liquid-vapor interface. Recommendations for design improvements are discussed.

Voss, J. S.↗

Equivalent source modeling of the main field using Magsat data

Progress is reported on software development for equivalent dipole source modeling of the main magnetic field. This includes a spatial statistical output capability, a subroutine to compute the equivalent spherical harmonic representation from the dipole distribution, and capability to plot the global locations of the dipoles and the values of the source magnetization.

Source record↗

Evaluation of space shuttle main engine fluid dynamic frequency response characteristics

In order to determine the POGO stability characteristics of the space shuttle main engine liquid oxygen (LOX) system, the fluid dynamic frequency response functions between elements in the SSME LOX system was evaluated, both analytically and experimentally. For the experimental data evaluation, a software package was written for the Hewlett-Packard 5451C Fourier analyzer. The POGO analysis software is documented and consists of five separate segments. Each segment is stored on the 5451C disc as an individual program and performs its own unique function. Two separate data reduction methods, a signal calibration, coherence or pulser signal based frequency response function blanking, and automatic plotting features are included in the program. The 5451C allows variable parameter transfer from program to program. This feature is used to advantage and requires only minimal user interface during the data reduction process. Experimental results are included and compared with the analytical predictions in order to adjust the general model and arrive at a realistic simulation of the POGO characteristics.

Gardner, T. G.↗

Main rotor six degree-of-freedom isolation system analysis

The design requirements of the system have been defined and an isolator concept satisfies these requirements identified. Primary design objectives for the isolation system are 90% attenuation of all NP main rotor shaft loads at a weight penalty less than or equal to 1% of design gross weight. The configuration is sized for a UH-60A BLACK HAWK helicopter and its performance, risk, and system integration were evaluated through a series of parametric studies. Preliminary design was carried forward to insure that the design is practical and that the details of the integration of the isolator into the helicopter system are considered. Alternate ground and flight test demonstration programs necessary to verify the proposed isolator design are defined.

Eastman, L. B.↗

Total main rotor isolation system analysis

The requirements for a preliminary design study and verification procedure for a total main rotor isolation system at n/rev are established. The system is developed and analyzed, and predesign drawings are created for an isolation system that achieves over 95 percent isolation of all six degrees of freedom.

Halwes, D. R.↗

Lox/Gox related failures during Space Shuttle Main Engine development

Specific rocket engine hardware and test facility system failures are described which were caused by high pressure liquid and/or gaseous oxygen reactions. The failures were encountered during the development and testing of the space shuttle main engine. Failure mechanisms are discussed as well as corrective actions taken to prevent or reduce the potential of future failures.

Cataldo, C. E.↗

A full-scale wind tunnel investigation of a helicopter bearingless main rotor

A helicopter bearingless main rotor was tested. Areas of investigation included aeroelastic stability, aerodynamic performance, and rotor loads as a function of collective pitch setting, RPM, airspeed and shaft angle. The rotor/support system was tested with the wind tunnel balance dampers installed and, subsequently, removed. Modifications to the rotor hub were tested. These included a reduction in the rotor control system stiffness and increased flexbeam structural damping. The primary objective of the test was to determine aeroelastic stability of the fundamental flexbeam/blade chordwise bending mode. The rotor was stable for all conditions. Damping of the rotor chordwise bending mode increases with increased collective pitch angle at constant operating conditions. No significant decrease in rotor damping occured due to frequency coalescence between the blade chordwise fundamental bending mode and the support system.

Warmbrodt, W.↗

Space Shuttle main engine nozzle-steerhorn dynamics

On two occasions during the Space Shuttle main engine development, the LH2 feedline (called the steerhorn, because of its shape) failed during the cutoff transient. A dynamic test was undertaken, and an analytical model was developed and correlated to the dynamic test. Detailed models of the tube bundle were required to obtain the equivalent shell coefficients. All-shell models of the nozzle wall were found better than beam-shell models. The most difficult part of the structure to simulate was the felt-metal pad between the feedline and its mount, which introduced nonlinear stiffness and damping and led to the use of separate low amplitude and high amplitude models. The total structure was found to have 400 modes in the frequency range of interest, 0 to 500 Hz. Good test analysis correlation was obtained and a modified feedline configuration was found to demonstrate a 40% reduction of response stress from the original configuration.

Kiefling, L.↗

Space Shuttle main engine progress through the first flight

A system overview is presented for the Space Shuttle Main Engine (SSME), and extensive performance comparisons are made with the Saturn V booster powerplant showing (1) staged-combustion turbopump pressures of 7,500 vs 1,100 psi for the Saturn V first stage; (2) a specific impulse of 455 vs 300; (3) power density of 100 vs 20 hp/lb; and (4) chamber pressures of 3200 vs 1000 psia. An account is then given of the SSME testing program, engine certification process and flight aboard the Space Shuttle Columbia, with attention to anomalies detected during flight in turbopump operation and mixture ratio sensor function.

Johnson, J. R.↗

Space shuttle main engine controller

A technical description of the space shuttle main engine controller, which provides engine checkout prior to launch, engine control and monitoring during launch, and engine safety and monitoring in orbit, is presented. Each of the major controller subassemblies, the central processing unit, the computer interface electronics, the input electronics, the output electronics, and the power supplies are described and discussed in detail along with engine and orbiter interfaces and operational requirements. The controller represents a unique application of digital concepts, techniques, and technology in monitoring, managing, and controlling a high performance rocket engine propulsion system. The operational requirements placed on the controller, the extremely harsh operating environment to which it is exposed, and the reliability demanded, result in the most complex and rugged digital system ever designed, fabricated, and flown.

Mattox, R. M.↗

A flight investigation of blade-section aerodynamics for a helicopter main rotor having 10-64C airfoil sections

Pressure data at 90 percent blade radius were obtained for a helicopter main rotor with 10-64C blade sections during flight. Concurrent measurements ere made of vehicle flight state, performance and some rotor loads. The test envelope included hover, level flight from about 65 to 162 knots, climb and descent, and collective fixed maneuvers. Good agreement is shown between some sets of airfoil pressure distributions obtained in flight and those from two-dimensional wind-tunnel tests or theoretical calculations.

Morris, C. E. K., Jr.↗