Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Study of in-plane orientation of epitaxial AlN films grown on (111) SrTiO{sub 3}

Substrate temperature and chemical etching were demonstrated to be dominant factors in determining the in-plane orientation of AlN films grown epitaxially on SrTiO{sub 3} (STO) (111) substrates by magnetron sputtering. Single-domain epitaxial AlN films were grown at moderate temperatures of 270-370 deg. C with a sharp interface and orientation relationship of [2110]{sub AlN} parallel [011]{sub STO} and (0002){sub AlN} parallel (111){sub STO}. At temperature above 470 deg. C, an additional 30 deg. in-plane-rotated AlN domain appeared, and increased in percentage with increasing temperature. A model based on the reconstruction of STO (111) surfaces from (1x1) to ({radical}(3)x{radical}(3))R30 deg. was proposed to account for the formation of this new domain.

36 MATERIALS SCIENCE↗

Conversion electron Moessbauer spectroscopy of epitaxial Co{sub 2}Cr{sub 0.6}Fe{sub 0.4}Al thin films

Heusler half-metals are promising for spintronic applications. Epitaxial thin films of the exemplar compound Co{sub 2}Cr{sub 0.6}Fe{sub 0.4}Al (CCFA) were investigated using conversion electron Moessbauer spectroscopy to clarify the factors influencing the spin polarization. CCFA films were deposited by rf magnetron sputtering on MgO substrates with and without an Fe buffer layer. Annealing improves their crystallographic order, causes the diffusion of Fe atoms from the Fe buffer layer into the CCFA, and favors the Co-Fe disorder. The listed factors are possible reasons for the increase and subsequent reduction of the tunneling magnetoresistance in CCFA thin films observable across the annealing temperature range.

36 MATERIALS SCIENCE↗

Development and research of a coaxial microwave plasma thruster

An overview of the research on a coaxial microwave plasma thruster at Northwestern Polytechnic University is presented. Emphasis is put on the development and research on key components of the thruster system, a microthrust balance, plasma plume diagnostics, and a numerical simulation of the plasma flow field inside the thruster cavity. The developed thruster cavity is chosen from a coaxial resonant cavity with concentrated capacitance, which can operate well in atmosphere and vacuum conditions. The development of a microwave source shows that a magnetron powered by a switch power supply has advantages in the power level and efficiency, but a solid state microwave source synthesized from the arsenide field effect transistor is superior in weight and volume. Through elimination of the effect of large gravity and resistance force induced by a gas pipe line and a microwave transmitting line on the microthrust, 15 mN and 340 s in the performance of the microwave plasma thruster at 70 W and with helium gas are measured. Diagnosing experiment shows that the plasma plume density is in the range of (1-7.2)x10{sup 16}/m{sup 3}. Numerical simulation of the plasma flow field inside the coaxial thruster cavity shows that there is a good match between the microwave power and gas flow rate.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Sulphide Ga{sub x}Ge{sub 25-x}Sb{sub 10}S{sub 65(x=0,5)} sputtered films: Fabrication and optical characterizations of planar and rib optical waveguides

We report the fabrication and the physical and optical characterizations of sulphide Ga{sub x}Ge{sub 25-x}Sb{sub 10}S{sub 65(x=0,5)} rib waveguides. High quality films fabricated on SiO{sub 2}/Si wafer substrates were obtained using the sputtering magnetron rf deposition method. The slab waveguides obtained without annealing present propagation losses of about 0.6 dB/cm at 1550 nm. These optical losses are not important for implementation in optical devices based on silicon-on-insulator or polymer, for instance, atomic force microscopy measurements revealed low interface roughness between the different media (substrate/film and film/air). Reactive ion etching was used to pattern rib waveguides between 2 and 300 {mu}m wide. The parameters were optimized to obtain a dry etching process that had low surface roughness, vertical sidewalls, etch depth of more than 1 {mu}m, and reasonable etching rate. This technique was used to fabricate Y optical junctions for optical interconnections on chalcogenide amorphous films. Their optical transmission was demonstrated by optical near field of guided modes and optical losses were measured and discussed.

36 MATERIALS SCIENCE↗

Exchange bias in NiFe/granular-FeMn-MgO bilayers

A series of polycrystalline NiFe/(FeMn){sub 1-x}(MgO){sub x} bilayers with granular antiferromagnetic layers were prepared by magnetron sputtering. For a specific antiferromagnetic layer thickness, the intensity of the fcc (111) x-ray diffraction peaks from Cu, NiFe, and FeMn layers, and the FeMn grain size exhibit maxima at x=0.025. At this composition, significant enhancement in exchange field is observed together with slight change in coercivity. Remarkably, the training effect in exchange bias is greatly suppressed. These observations indicate the possibility of utilizing granular antiferromagnetic layers in magnetoelectronic devices to improve thermal stability.

36 MATERIALS SCIENCE↗

Magnetic properties and microstructure of FePt/Au multilayers with high perpendicular magnetocrystalline anisotropy

FePt/Au multilayers were deposited on preheated 100 deg. C MgO (001) single crystal substrates by magnetron sputtering. Magnetic properties and microstructure of the films were studied. Results show that the film possesses high coercivity H{sub C}, excellent perpendicular magnetic anisotropy (PMA), and weak interparticle exchange coupling (IEC) after annealing. FePt and Au can grow epitaxially on MgO substrates along the [001] direction, leading to excellent PMA. Au atoms partly diffuse to the boundaries of FePt phases and function as grain refiners and particle isolators, which markedly decrease the FePt grain size and IEC. Moreover, the additional FePt/Au interface energy, the stress energy due to the mismatch between FePt and Au lattices, and the diffusion of Au atoms all promote the ordering process of FePt film. This leads to the decrease in ordering temperature by 150 deg. C and a considerable increase in H{sub C}.

36 MATERIALS SCIENCE↗

Development of Electron Cyclotron Resonance Ion Source for Synthesis of Endohedral Metallofullerenes

A new electron cyclotron resonance ion source (ECRIS) has been constructed for synthesis of endohedral metallofullerenes. The main purpose of the ion source is to produce new biological and medical materials. The design is based on ECRIS for production of multicharged ion beams with a traditional minimum-B magnetic field. An 8-10 GHz traveling wave tube (TWT) amplifier and a 2.45 GHz magnetron have been applied as microwave sources. Fullerene and metal vapor are introduced with a filament heating micro-oven and an induction heating oven, respectively. In preliminary ion-extraction test, Ar{sup +} is 54 {mu}A. Many broken fullerenes such as C{sub 58} and C{sub 56} are observed in fullerene ion beams.

36 MATERIALS SCIENCE↗

Enhancement of spin-asymmetry by L2{sub 1}-ordering in Co{sub 2}MnSi/Cr/Co{sub 2}MnSi current-perpendicular-to-plane magnetoresistance devices

Co{sub 2}MnSi/Cr/Co{sub 2}MnSi (001)-fully epitaxial current-perpendicular-to-plane giant magnetoresistance (CPP-GMR) devices were fabricated via an UHV magnetron sputtering system. The relationship between the degree of chemical ordering in Co{sub 2}MnSi (CMS) and the CPP-GMR characteristics was investigated systematically against the annealing temperature of the devices. X-ray diffraction profiles and reflection high-energy electron diffraction images indicated that annealing improved L2{sub 1}-ordering. The MR ratio also increased upon annealing and the maximum MR ratio of 5.2% and {delta}RA of 6.5 m{omega} {mu}m{sup 2} were achieved by annealing at 400 deg. C. These results indicate that promoting the degree of L2{sub 1}-ordering in CMS enhances the bulk and/or interface spin-asymmetry coefficients.

36 MATERIALS SCIENCE↗

Elastic buckling of AlN ribbons on elastomeric substrate

For optoelectronic applications requiring unconventional substrates, use of flexible forms of semiconductors may be inevitable. We have fabricated a flexible form of single crystalline AlN ribbons with periodic and wavelike structures on an elastomeric substrate. Single crystalline AlN films were grown on Si (111) substrate using high vacuum unbalanced magnetron sputtering. Crystallinity of the AlN films was confirmed with x-ray diffraction and pole figure. The AlN ribbons were transferred to a prestrained (3.1%) elastomeric substrate and the resulting ''wavy'' ribbons on the substrate were flexible up to 30% strain without any crack formation on the surface. As the film thickness changed from 300 to 900 nm, the periods of the waves varied from 95 to 277 {mu}m, which were within a 10% error of the calculated values. When we applied more than 30% strain, mechanical instability, such as the failure of AlN ribbons due to the cracks on the surface and the merged ribbons, was observed.

36 MATERIALS SCIENCE↗

Increased ferromagnetic resonance linewidth and exchange anisotropy in NiFe/FeMn bilayers

In the past investigations, the exchange-biased bilayers show much larger ferromagnetic resonance (FMR) linewidth than that of single ferromagnetic layer films. However, the mechanism of the large linewidth remains controversial. In this paper, the FMR linewidths of NiFe/FeMn bilayers prepared by dc magnetron sputtering system are systematically studied. Besides the intrinsic damping and magnetic inhomogeneity, the extrinsic relaxation based on two-magnon scattering process should be also considered to explain the strong in-plane angular dependence of the linewidths. The fitting of the out-of-plane angular dependence of the linewidths shows that the intrinsic Gilbert damping effect plays a major role in the increased linewidth in the bilayers. The value of the g factor increases due to the effect of the exchange coupling at the NiFe/FeMn interface, resulting in an enhancement in the Gilbert damping factor G. The fitting results indicate that the line broadening of the exchange-biased films is related to the exchange anisotropy. The effects of FeMn layer thickness, growth sequence of FeMn layer, and temperature on the linewidths further approve this interpretation.

36 MATERIALS SCIENCE↗

Self-organization processes in highly epitaxial La{sub 2/3}Sr{sub 1/3}MnO{sub 3} thin films grown on SrTiO{sub 3} (001) substrates

We report on the growth of highly epitaxial La{sub 2/3}Sr{sub 1/3}MnO{sub 3} thin films on SrTiO{sub 3} (001) oriented substrates by rf magnetron sputtering. It is shown that structural strain caused by lattice mismatch between film and substrate and kinetics growing instabilities may offer unique opportunities to control the film morphologies. By increasing growth rate, the surface morphology undergoes a dramatic transformation: from very smooth surface through arrays of mounds or antidots to hatched morphology. All nano-objects form long-range ordered arrays running in the steps direction defined by the miscut angle of underlying substrate. These self-assembled structures are of high interest envisaging a new route for the fabrication of oxide-based magnetoelectronic devices by using a bottom-up approach.

36 MATERIALS SCIENCE↗

Magnetization reversal in CoPt(111) hard/soft bilayers

The magnetization reversal in magnetron sputtered CoPt(111) hard/soft bilayers has been studied by polarized neutron reflectometry and magnetization measurements. The stability of the hard layer is tuned by the heat-treatment conditions which are used to crystallize the chemically ordered, high anisotropy, L{sub 1}0 phase. All the samples show the same features in their first order reversal curves but the lateral domain size during the magnetization reversal of the soft layer differs. In samples with strong intergrain coupling it exceeds the coherence length of the neutron beam, resulting in spin-flip scattering. In contrast, the hard layer reversal occurs through the reorientation in small domains.

36 MATERIALS SCIENCE↗

High piezoelectricity of Pb(Zr,Ti)O{sub 3}-based ternary compound thin films on silicon substrates

Pb(Zr,Ti)O{sub 3} (PZT)-based ternary compound thin films, 0.06PMnN-0.94PZT(50/50) (PMnN-PZT), are deposited on Si-based heterostructures by rf magnetron sputtering system. The intrinsic PZT(50/50) thin films are also deposited on the same kind of substrates for comparison. The PMnN-PZT thin films show the similar polycrystalline structures as those of PZT with highly (111) oriented perovskite phase. The PMnN-PZT thin films show excellent piezoelectricity and ferroelectricity which are distinctly better than those of PZT thin films prepared with the same deposition conditions. Besides, the cantilevers of PMnN-PZT thin films on the heterostructure substrates also exhibit higher sensitivities than the PZT thin film cantilevers.

36 MATERIALS SCIENCE↗

Ultralow dielectric losses in pyrochlore films of the PbO-MgO-Nb{sub 2}O{sub 5}-TiO{sub 2} system

(1-x)Pb(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}-xPbTiO{sub 3} (PMNT) (with x=0.1) thin films were prepared on Pt-coated silicon substrates by radio-frequency magnetron sputtering and postdeposition annealing method. A well-crystallized pyrochlore phase structure, which started to nucleate and grow at 450-500 deg. C, was formed in the PMNT thin films. These pyrochlore-structured PMNT thin films show ultralow dielectric losses with a typical loss tangent as low as 0.001, accompanied by a relatively high dielectric constant ({epsilon}{sub r}=176). Such an extremely low dielectric loss, having never been obtained in thin films of perovskite PMNT, is probably ascribed to the specific structural feature of pyrochlore phase, chemically different from its perovskite counterpart, and ascribed to the avoidance of the polar domain-related losses.

36 MATERIALS SCIENCE↗

Development of a Portable 950 keV X-band Linac for NDT

We are developing a portable 950 keV X-band (9.4 GHz) linac X-ray source for on-site nondestructive testing of erosion of metal pipes at a petrochemical complex. To develop it, we adopted a compact X-band 9.4 GHz magnetron of 250 kW for RF generation device. The whole device, including power supply and cooling devices, were also downsized. The dose rate of X-ray converted in a tungsten target is designed to be 0.2 Gy/min at 1-m distance. We designed an accelerating tube that uses the {pi} mode for the lower energy part and the {pi}/2 mode cavity for the higher energy. We manufactured the accelerating tube and carried out beam acceleration tests, confirming that the electron beam was accelerated up to 950 keV.

43 PARTICLE ACCELERATORS↗

Dielectric properties and tunability of cubic pyrochlore Bi{sub 1.5}MgNb{sub 1.5}O{sub 7} thin films

The Bi{sub 1.5}MgNb{sub 1.5}O{sub 7} thin films with cubic pyrochlore structure were prepared onto Pt-coated sapphire substrates by rf magnetron sputtering deposition from a stoichiometric target. Dielectric measurements indicated that the Bi{sub 1.5}MgNb{sub 1.5}O{sub 7} thin films exhibited low dielectric loss of {approx}0.0018-0.004, medium dielectric constant of {approx}86, and superior tunable dielectric properties at room temperature. A bias field of 1.6 MV/cm resulted in the maximum voltage tunability of 39%. A brief discussion is given on the enhanced tunability compared to Bi{sub 1.5}ZnNb{sub 1.5}O{sub 7} thin films. The low loss and superior tunability make Bi{sub 1.5}MgNb{sub 1.5}O{sub 7} thin films promising for potential tunable capacitor applications.

36 MATERIALS SCIENCE↗

Degradation mechanisms of electron mobility in metal-oxide-semiconductor field-effect transistors with LaAlO{sub 3} gate dielectric

LaAlO{sub 3} is a promising candidate of gate dielectric for future very large scale integration devices. In this work, metal-oxide-semiconductor capacitors and transistors with LaAlO{sub 3} gate dielectric were fabricated and the electron mobility degradation mechanisms were studied. The LaAlO{sub 3} films were deposited by radio frequency magnetron sputtering. The LaAlO{sub 3} films were examined by x-ray diffraction, secondary ion mass spectroscopy, and x-ray photoelectron spectroscopy. The temperature dependence of metal-oxide-semiconductor field-effect transistors characteristics was studied from 11 K to 400 K. The rate of threshold voltage change with temperature (DELTAV{sub T}/DELTAT) is -1.51 mV/K. The electron mobility limited by surface roughness is proportional to E{sub eff}{sup -0.66} in the electric field of 0.93 MV/cm<E{sub eff}<2.64 MV/cm at 300 K and the phonon scattering is proportional to T{sup -5.6} between 300 and 400 K. Soft optical phonon scattering was used to explain the extra source of phonon scattering in LaAlO{sub 3}-gated n-channel metal-oxide-semiconductor field-effect transistors.

36 MATERIALS SCIENCE↗

Nanoscale deformation mechanism of TiC/a-C nanocomposite thin films

This paper concentrates on the deformation behavior of amorphous diamondlike carbon composite materials. Combined nanoindentation and ex situ cross-sectional transmission electron microscopy investigations are carried out on TiC/a-C nanocomposite films, with and without multilayered structures deposited by pulse dc magnetron sputtering. It is shown that by controlling the distribution of nanocrystallites forming nanoscale multilayers, the system can be used as a 'microstructural ruler' that is able to distinguish various deformation patterns, which can be hardly detected otherwise in a homogeneous structure. It is shown that rearrangement of nanocrystallites and displacement of a-C matrix occur at length scales from tens of nanometer down to 1 nm. At submicrometer scale homogeneous nucleation of multiple shear bands has been observed within the nanocomposites. The multilayered structure in the TiC/a-C nanocomposite film contributes to an enhanced toughness.

77 NANOSCIENCE AND NANOTECHNOLOGY↗