Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LAND”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Agreement of Analytical and Simulation-Based Estimates of the Required Land Depth in Climate Models

Previous analytical and simulation-based analyses suggest that deeper land surface models are needed to realistically simulate the terrestrial thermal state in climate models, with implications for land-atmosphere interactions. Analytical approaches mainly focused on the subsurface propagation of harmonics such as the annual temperature signal, and a direct comparison with climate-change model output has been elusive. Here, this study addresses the propagation of a harmonic pulse fitted to represent the timescale and amplitude of anthropogenic warming. Its comparison to land model simulations with stepwise increased bottom boundary depth leads to an agreement between the simulation-based and analytical frameworks for long-term climate trends. Any depth increase gradually decreases the relative error in the subsurface thermodynamics, and a minimum depth of 170 m is recommended to simulate the ground climate adequately. The approach provides an accurate estimate of the required land-model depth for climate-change simulations and assesses the relative bias in insufficiently deep land models.

54 ENVIRONMENTAL SCIENCES↗

Soft Landing of Bare Nanoparticles with Controlled Size, Composition, and Morphology

A kinetically-limited physical synthesis method based on magnetron sputtering and gas aggregation has been coupled with size-selection and ion soft landing to prepare bare metal nanoparticles on surfaces with controlled coverage, size, composition, and morphology. Employing atomic force microscopy (AFM) and scanning electron microscopy (SEM), it is demonstrated that the size and coverage of bare nanoparticles soft landed onto flat glassy carbon and silicon as well as stepped graphite surfaces may be controlled through size-selection with a quadrupole mass filter and the length of deposition, respectively. The bare nanoparticles are observed with AFM to bind randomly to the flat glassy carbon surface when soft landed at relatively low coverage (1012 ions). In contrast, on stepped graphite surfaces at intermediate coverage (1013 ions) the soft landed nanoparticles are shown to bind preferentially along step edges forming extended linear chains of particles. At the highest coverage (5 x 1013 ions) examined in this study the nanoparticles are demonstrated with both AFM and SEM to form a continuous film on flat glassy carbon and silicon surfaces. On a graphite surface with defects, however, it is shown with SEM that the presence of localized surface imperfections results in agglomeration of nanoparticles onto these features and the formation of neighboring depletion zones that are devoid of particles. Employing high resolution scanning transmission electron microscopy in the high angular annular dark field imaging mode (STEM-HAADF) and electron energy loss spectroscopy (EELS) it is demonstrated that the magnetron sputtering/gas aggregation synthesis technique produces single metal particles with controlled morphology as well as bimetallic alloy nanoparticles with clearly defined core-shell structure. Therefore, this kinetically-limited physical synthesis technique, when combined with ion soft landing, is a versatile complementary method for preparing a wide range of bare supported nanoparticles with selected properties that are free of the solvent, organic capping agents, and residual reactants present with nanoparticles synthesized in solution.

cluster↗

Available land for cellulosic biofuel production: a supply chain centered comparison

The land that is potentially available to produce dedicated cellulosic bioenergy crops, often referred to as 'marginal' land, depends heavily on the underlying assumptions used to classify and identify it. In this study we compare three definitions and types of marginal land to identify the interactions between the bioenergy landscape and the logistics networks needed for the biofuel supply chain. Typical studies of the scale, cost, and greenhouse gas (GHG) mitigation potential of cellulosic biofuel take a land-centered approach which may neglect to account for the trade-offs between establishing bioenergy crops and the supply chain design decisions needed to allow those crops to be converted to liquid fuel. A mathematical programming approach is used to minimize the total annualized cost of a large-scale field-to-product system producing bioethanol in the USA midwest. Results show that a high concentration of marginal land leads to efficient systems and that the bioenergy landscape design becomes increasingly important with a higher emphasis on GHG mitigation. Additionally, targeted landscape design (including fertilization) with a focus on fields with high soil carbon sequestration potential can greatly reduce the system-wide GHG emissions for only a small increase in the unit cost of biofuel.

09 BIOMASS FUELS↗

Stone Content Influence on Land Surface Model Simulation of Soil Moisture and Evapotranspiration at Reynolds Creek Watershed

Considerable advancement in spatiotemporal resolution of remote sensing and ground-based measurements has enabled refinement of parameters used in land surface models for simulating surface water fluxes. However, land surface modeling capabilities are still inadequate for accurate representation of subsurface properties and processes, which continue to limit the accuracy of land surface model simulation. Our objective in this study was to examine the performance of the variously parameterized Noah-Multiphysics (Noah-MP) land surface model and to improve simulations of evapotranspiration (ET) and soil moisture dynamics in stony soils using verification from eddy covariance ET and in-situ soil moisture data. Meteorological and eddy covariance data from the Lower Sheep sub-catchment within the Reynolds Creek Experimental Watershed in Southwestern Idaho were employed to drive Noah-MP and to assess simulation results. We evaluated the performance of Noah-MP considering four different scenarios: (1) A one-layer soil profile with Noah-MP default soil hydraulic parameters, followed by five-layer soil profiles using -(2) Noah-MP default soil hydraulic parameters -(3) soil hydraulic parameters derived from a pedotransfer function using field observations, and -(4) hydraulic parameters from (3) which also accounted for stone content in each layer. Each modeling experiment was forced with the same set of initial conditions, atmospheric input and vegetation parameters. Our results indicated that enhanced representation of soil profile properties and stone content information noticeably improve the Noah-MP land surface model simulation of soil moisture content and evapotranspiration.

Land surface models, Soil hydrology, Noah-MP, Evap↗

Enabling kilometer-scale E3SM land model simulation over North America: A new integrated framework solution

This study introduces a novel framework designed to enhance the performance, scalability, and portability of the kilometer-scale E3SM Land Model (km-ELM) within the E3SM modeling infrastructure. By seamlessly integrating cutting-edge data tools, we address existing challenges such as slow performance, limited scalability, and difficulties in software integration in current data-driven ELM simulation over large geographic areas. Our innovative approach leverages the KiloCraft data toolkit to generate unified inputs for simulations ranging from a single-cite case, to a 72,083-cell regional case to a continental configuration encompassing 21.6 million land grid cells at a 1 km × 1 km resolution. We conduct extensive strong- and weak-scaling experiments on three state-of-the-art supercomputers, utilizing up to 100,800 CPU cores across 2400 compute nodes to evaluate end-to-end metrics including wall-clock time, simulation-years-per-day (SYPD), initialization costs, and I/O throughput. Our results reveal the land (LND) component’s efficient scaling, demonstrating near-ideal weak scaling and strong-scaling parallel efficiencies reaching up to 87% at 50,400 cores. We confirm portability and reproducibility through bitwise-equivalent outputs across different machines using identical inputs over supported machines. Notably, at extreme scales, we identify I/O as a critical bottleneck and that leads to effective solution with the SCORPIO/ADIOS stack. Collectively, these findings validate the deployment of km-ELM at a continental scale with high parallel efficiency and provide essential guidance on configuration, decomposition, and I/O settings for optimized kilometer-scale land simulations in E3SM. This work emphasizes the innovative design and practical solutions that enhance the operational capabilities of km-ELM, focusing on software performance and scalability while leaving detailed scientific evaluations of simulated land processes for future investigations.

E3SM land model (ELM), km-ELM, scalability, perfor↗

Tracking cropland transitions: A comparative analysis of U.S. land cover change data

There are a growing number of land cover data available for the conterminous United States, supporting various applications ranging from biofuel regulatory decisions to habitat conservation assessments. These datasets vary in their source information, frequency of data collection and reporting, land class definitions, categorical detail, and spatial scale and time intervals of representation. These differences limit direct comparison, contribute to disagreements among studies, confuse stakeholders, and hamper our ability to confidently report key land cover trends in the U.S. Here we assess changes in cropland derived from the Land Change Monitoring, Assessment, and Projection (LCMAP) dataset from the U.S. Geological Survey and compare them with analyses of three established land cover datasets across the coterminous U.S. from 2008-2017: (1) the National Resources Inventory (NRI), (2) a dataset Lark et al. 2020 derived from the Cropland Data Layer (CDL), and (3) a dataset from Potapov et al. 2022. LCMAP reports more stable cropland and less stable noncropland in all comparisons, likely due to its more expansive definition of cropland which includes managed grasslands (pasture and hay). Despite these differences, net cropland expansion from all four datasets was comparable (5.18-6.33 million acres), although the geographic extent and type of conversion differed. LCMAP projected the largest cropland expansion in the southern Great Plains, whereas other datasets projected the largest expansion in the northwestern and central Midwest. Most of the pixel-level disagreements (86%) between LCMAP and Lark et al. 2020 were due to definitional differences among datasets, whereas the remainder (14%) were from a variety of causes. Cropland expansion in the LCMAP likely reflects conversions of more natural areas, whereas cropland expansion in other data sources also captures conversion of managed pasture to cropland. The particular research question considered (e.g., habitat versus soil carbon) should influence which data source is more appropriate.

60 APPLIED LIFE SCIENCES↗

Interactions among bioenergy feedstock choices, landscape dynamics, and land use

Landscape implications of bioenergy feedstock choices are significant and depend on land-use practices and their environmental impacts. Although land-use changes and carbon emissions associated with bioenergy feedstock production are dynamic and complicated, lignocellulosic feedstocks may offer opportunities that enhance sustainability when compared to other transportation fuel alternatives. For bioenergy sustainability, major drivers and concerns revolve around energy security, food production, land productivity, soil carbon and erosion, greenhouse gas emissions, biodiversity, air quality, and water quantity and quality. The many implications of bioenergy feedstock choices require several indicators at multiple scales to provide a more complete accounting of effects. Ultimately, the long-term sustainability of bioenergy feedstock resources (as well as food supplies) throughout the world depends on land-use practices and landscape dynamics. Land-management decisions often invoke trade-offs among potential environmental effects and social and economic factors as well as future opportunities for resource use. The hypothesis being addressed in this paper is that sustainability of bioenergy feedstock production can be achieved via appropriately designed crop residue and perennial lignocellulosic systems. We find that decision makers need scientific advancements and adequate data that both provide quantitative and qualitative measures of the effects of bioenergy feedstock choices at different spatial and temporal scales and allow fair comparisons among available options for renewable liquid fuels.

54 ENVIRONMENTAL SCIENCES↗

Spatial arrangement of canopy structure and land-use history alter the effect that herbivores have on plant growth

The spatial arrangement of past and present human activities could affect the strength of species interactions through changes to environmental conditions. To better understand how land-use history might mediate the effect of insect herbivory on the growth of four herbaceous plant species at the edges between woodlands and open savannas, we coupled large-scale manipulations of canopy structure by thinning overstory trees to create savanna habitat in non-agricultural and post-agricultural longleaf pine woodlands with local-scale herbivore exclosures at two distances from habitat edges. Light availability, grasshopper abundance, and herbaceous plant cover all increased in patches that received overstory tree thinning. Land-use history altered the effect that edges created by the overstory thinning treatments had on grasshopper herbivory for one plant species (Carphephorus bellidifolius). The edge between land-use histories also altered herbivore effects on three plant species in thinned patches. These edge effects were driven in part by changes in availability of alternative resources for grasshoppers, shady edges, or grasshopper abundance. Canopy manipulation also had important effects on herbivory that were independent of the habitat edge: grasshopper herbivory reduced plant growth of the smallest species (C. bellidifolius) regardless of canopy manipulation, whereas herbivory on two larger species (Solidago nemoralis and So. odora) reduced plant growth mainly in patches with an intact overstory canopy. Collectively, this work suggests that the species-specific effects of grasshopper herbivory on plant growth were driven by both plant traits (e.g., size or growth rates) and landscape-mediated changes to grasshopper abundance, light availability, or availability of alternative resources for grasshoppers created by land-use history and canopy structure. Furthermore, because the heterogeneity in herbivory revealed by our large-scale experiment is likely linked to plant traits, our results provide a means for understanding the profound, but often idiosyncratic, effects of land-use legacies and edges on plant populations and communities.

60 APPLIED LIFE SCIENCES↗

GCAM 3.0 Agriculture and Land Use: Data Sources and Methods

This report presents the data processing methods used in the GCAM 3.0 agriculture and land use component, starting from all source data used, and detailing all calculations and assumptions made in generating the model inputs. The report starts with a brief introduction to modeling of agriculture and land use in GCAM 3.0, and then provides documentation of the data and methods used for generating the base-year dataset and future scenario parameters assumed in the model input files. Specifically, the report addresses primary commodity production, secondary (animal) commodity production, disposition of commodities, land allocation, land carbon contents, and land values.

54 ENVIRONMENTAL SCIENCES↗

Land-Use Requirements for Solar Power Plants in the United States

This report provides data and analysis of the land use associated with utility-scale ground-mounted solar facilities, defined as installations greater than 1 MW. We begin by discussing standard land-use metrics as established in the life-cycle assessment literature and then discuss their applicability to solar power plants. We present total and direct land-use results for various solar technologies and system configurations, on both a capacity and an electricity-generation basis. The total area corresponds to all land enclosed by the site boundary. The direct area comprises land directly occupied by solar arrays, access roads, substations, service buildings, and other infrastructure. As of the third quarter of 2012, the solar projects we analyze represent 72% of installed and under-construction utility-scale PV and CSP capacity in the United States.

14 SOLAR ENERGY↗

Closure Report for the Central Facilities Area Sewage Treatment Plant Lagoon 3 and Land Application Area

Because of significantly reduced wastewater discharges to the Central Facilities Area Sewage Treatment Plant, wastewater has not been land applied since 2011. The future need to land apply wastewater was evaluated. Based on the current wastewater flows into the Central Facilities Area Sewage Treatment Plant, expected future missions at Central Facilities Area, and the discovery in 2014 that Lagoon 3 was leaking at an unacceptable rate, it was determined that the Central Facilities Area Sewage Treatment Plant is significantly oversized and that Lagoons 1 and 2 could be converted to total evaporation lagoons. Therefore, the decision was made to remove the existing sludge in Lagoon 3 and transfer it to Lagoon 2 for additional treatment, decommission Lagoon 3 and the land application area, and terminate the wastewater reuse permit. A closure plan was submitted and approved by the Idaho Department of Environmental Quality in 2016. This report describes the closure activities that were performed. Closure activities included: • Characterizing the soil/liner in Lagoon 3 to determine whether further characterization and/or remediation will be required under the Comprehensive Environmental Response, Compensation, and Liability Act. • Based on the results from the soil/liner sampling, determining whether additional sampling will be required for the land application area. • Removing the sludge in Lagoon 3 and placing it in Lagoon 2. • Puncturing the Lagoon 3 soil/liner to prevent ponding of storm water and becoming a source for vectors. • Installing a permanent cap on the inlet piping to Lagoon 3. Samples were collected on November 10, 2016, and were submitted for analysis to an off-site laboratory. Data validation and evaluation were performed by Portage, INC. Sample results confirmed that there is no hazard to human health and the environment and that Lagoon 3 and the land application area could be closed. In August 2017, sludge was removed from Lagoon 3 and placed in Lagoon 2, the soil/liner was punctured in 4 places, and caps were installed on the primary and bypass inlet lines.

99 GENERAL AND MISCELLANEOUS↗

County Land-Use Regulations for Solar Energy Development in Colorado

We present a survey of county-level policies on ground-mounted solar development across Colorado, including both solar-specific ordinances as well as general land-use code that might be applicable in counties without solar-specific policies. This report provides an accessible reference for stakeholders interested in identifying counties with particular regulations or in analyzing the diversity of regulations across Colorado. We defined a set of search criteria to find information on solar definitions and classifications, permitting processes, and use-specific requirements in each of Colorado's 64 counties. With those criteria, we reviewed relevant ordinances, land-use code, and comprehensive and master plans. If any uncertainties were identified, we contacted county officials for clarification. The findings are categorized and mapped to illustrate the distribution of key policies adopted across Colorado's counties on the following topics: solar definitions, solar siting policy documentation, categorization of PV systems for permitting, 1041 permitting, solar on agricultural land, panel height restrictions, fencing requirements, vegetation management, visual impacts, decommissioning plans, and financial assurance for decommissioning. Additionally, we identify and discuss policies that might impact the deployment of agrivoltaics, a dual land use combining both agriculture and solar on the same land, which might not fit neatly in existing zoning definitions and solar-specific regulations.

14 SOLAR ENERGY↗

Land-use Leakage

Leakage occurs whenever actions to mitigate greenhouse gas emissions in one part of the world unleash countervailing forces elsewhere in the world so that reductions in global emissions are less than emissions mitigation in the mitigating region. While many researchers have examined the concept of industrial leakage, land-use policies can also result in leakage. We show that land-use leakage is potentially as large as or larger than industrial leakage. We identify two potential land-use leakage drivers, land-use policies and bioenergy. We distinguish between these two pathways and run numerical experiments for each. We also show that the land-use policy environment exerts a powerful influence on leakage and that under some policy designs leakage can be negative. International “offsets” are a potential mechanism to communicate emissions mitigation beyond the borders of emissions mitigating regions, but in a stabilization regime designed to limit radiative forcing to 3.7 2/m2, this also implies greater emissions mitigation commitments on the part of mitigating regions.

54 ENVIRONMENTAL SCIENCES↗

Challenging a Global Land Surface Model in a Local Socio-Environmental System

Land surface models (LSMs) predict how terrestrial fluxes of carbon, water, and energy change with abiotic drivers to inform the other components of Earth system models. Here, we focus on a single human-dominated watershed in southwestern Michigan, USA. We compare multiple processes in a commonly used LSM, the Community Land Model (CLM), to observational data at the single grid cell scale. For model inputs, we show correlations (Pearson’s R) ranging from 0.46 to 0.81 for annual temperature and precipitation, but a substantial mismatch between land cover distributions and their changes over time, with CLM correctly representing total agricultural area, but assuming large areas of natural grasslands where forests grow in reality. For CLM processes (outputs), seasonal changes in leaf area index (LAI; phenology) do not track satellite estimates well, and peak LAI in CLM is nearly double the satellite record (5.1 versus 2.8). Estimates of greenness and productivity, however, are more similar between CLM and observations. Summer soil moisture tracks in timing but not magnitude. Land surface reflectance (albedo) shows significant positive correlations in the winter, but not in the summer. Looking forward, key areas for model improvement include land cover distribution estimates, phenology algorithms, summertime radiative transfer modelling, and plant stress responses.

54 ENVIRONMENTAL SCIENCES↗

A Subbasin-based framework to represent land surface processes in an Earth System Model

Realistically representing spatial heterogeneity and lateral land surface processes within and between modeling units in earth system models is important because of their implications to surface energy and water exchange. The traditional approach of using regular grids as computational units in land surface models and earth system models may lead to inadequate representation of lateral movements of water, energy and carbon fluxes, especially when the grid resolution increases. Here a new subbasin-based framework is introduced in the Community Land Model (CLM), which is the land component of the Community Earth System Model (CESM). Local processes are represented assuming each subbasin as a grid cell on a pseudo grid matrix with no significant modifications to the existing CLM modeling structure. Lateral routing of water within and between subbasins is simulated with the subbasin version of a recently-developed physically based routing model, Model for Scale Adaptive River Routing (MOSART). As an illustration, this new framework is implemented in the topographically diverse region of the U.S. Pacific Northwest. The modeling units (subbasins) are delineated from high-resolution Digital Elevation Model while atmospheric forcing and surface parameters are remapped from the corresponding high resolution datasets. The impacts of this representation on simulating hydrologic processes are explored by comparing it with the default (grid-based) CLM representation. In addition, the effects of DEM resolution on parameterizing topography and the subsequent effects on runoff processes are investigated. Limited model evaluation and comparison showed that small difference between the averaged forcing can lead to more significant difference in the simulated runoff and streamflow because of nonlinear horizontal processes. Topographic indices derived from high resolution DEM may not improve the overall water balance, but affect the partitioning between surface and subsurface runoff. More systematic analyses are needed to determine the relative merits of the subbasin representation compared to the commonly used grid-based representation, especially when land surface models are approaching higher resolutions.

Subbasin-based representation, Community Land Mode↗

Enabling Pinpoint Landing on Mars

This slide presentation reviews the entry, descent and landing (EDL) of a pinpoint landing (PPL) on Mars. These PPL missions will be required to deliver about 1000 kg of useful payload to the surface of Mars, therefore soft landings are of primary interest. The landing sites will be in a mid to to high latitude with possible sites about 2.5 km above the martian mean surface altitude. The applicable EDL is described and reviewed in phases. The evaluation approach is reviewed and the requirements for an accurate landing are reviewed. The descent of the unguided aeroshell entry phase dispersion due to trajectory and ballistic coefficient variations are shown in charts. These charts view the dispersions from three entries, Entry from orbit, and two types of direct entry. There is discussion of the differences in steerable subsonic parachute control vs dispersions, and the propulsive phase delta velocity vs dispersions. Data is presented for the three trajectory phases (i.e., Aeroshell, supersonic and subsonic chute) for Direct entry and low orbit entry. The results of the analysis is presented, including possibilities for mitigation of dispersions. The analysis of the navigation error is summarized, and the trajectory biasing for martian winds is assessed.

aerodynamic↗

Mars Science Laboratory Entry, Descent, and Landing System Overview

In 2012, the Mars Science Laboratory (MSL) mission will pioneer the next generation of robotic Entry, Descent, and Landing (EDL) systems by delivering the largest and most capable rover to date to the surface of Mars. In addition to landing more mass than prior missions to Mars, MSL will offer access to regions of Mars that have been previously unreachable. The MSL EDL sequence is a result of a more stringent requirement set than any of its predecessors. Notable among these requirements is landing a 900 kg rover in a landing ellipse much smaller than that of any previous Mars lander. In meeting these requirements, MSL is extending the limits of the EDL technologies qualified by the Mars Viking, Mars Pathfinder, and Mars Exploration Rover missions. Thus, there are many design challenges that must be solved for the mission to be successful. Several pieces of the EDL design are technological firsts, such as guided entry and precision landing on another planet, as well as the entire Sky Crane maneuver. This paper discusses the MSL EDL architecture and discusses some of the challenges faced in delivering an unprecedented rover payload to the surface of Mars.

Mars Science Laboratory (MSL)↗

Pinpoint Landing Technology Assessment

This slide presentation reviews the technology developments required to achieve pinpoint landing for a Mars landing of a future unmanned vehicle. It addresses some of the challenges to achieving accurate landing (i.e., to 2-3 kilometers) of a designated landing site. The major challenge though is to reduce the possible propellant requirement to achieve this pinpoint landing capability which requires minimizing delivery error at powered descent ignition.

Mars pinpoint landing↗