Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IRON OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Simultaneous stack gas scrubbing wastewater purification

Variations of a process for removing sulfur dioxide from stack gases and using it to treat municipal waste water are described. The once-through system lowers the pH of the scrubbing water from minor depressions to a pH of about 2.5 under certain conditions. A recycle system uses iron for catalytic oxidation of sulfurous acid to sulfuric acid allowing very large amounts of sulfur dioxide to be absorbed in a small portion of water. The partial recycle system uses municipal wastewater and iron as a scrubbing medium, followed by neutralization of the wastewater with lime to produce an iron hydroxide precipitation which, when removed, produces tertiary quality treated wastewater. The SO2 scrubber is described, test results are analyzed, and a preliminary capital cost estimate for the three processes is included.

Source record↗
NASA NTRSDate not supplied

Formation of Fe(III) (hydr)oxides from Fe(II) sulfides: Implications for akaganeite detection on Mars

Akaganeite (β-FeO(OH,Cl)) is a Fe(III) (hydr)oxide with a tunnel structure typically occupied by chloride. This mineral was first proposed to be present in Meridiani Planum and Gusev crater on Mars and akaganeite was subsequently detected by X-ray diffraction in Yellowknife Bay and Vera Rubin Ridge locations in Gale crater. Akaganeite in Gale crater has been proposed to form from Fe(II) sulfides but formation conditions remain unconstrained. We investigated akageneite formation by oxidative alteration of natural Fe(II) sulfide pyrrhotite exposed to HCl and oxidation-hydrolysis of Fe(II) HCl-leached from pyrrhotite at initial pH0 1.5, 2, 3, and 4. X-ray diffraction and Mössbauer analyses revealed formation of poorly-crystallized akageneite in oxidative alteration experiments. Air-exposure of the HCl-reacted dry pyrrhotite led to an increase in akageneite formation and precipitation of Fe(II) hydrated sulfates, goethite, and hydronium jarosite. Iron(II) oxidation-hydrolysis was sensitive to Si dissolved from phyllosilicates in one pyrrhotite sample. Akaganeite and goethite formed at pH0 1.5 and 2 with akageneite more abundant at dissolved Si/Fe ratio of 0.08 and goethite more abundant at Si/Fe of 0.01. Akaganeite formed together with hematite, ferrihydrite, and goethite at pH0 3, and formation was suppressed at pH0 4. Well-crystallized akageneite precipitated at pH0 1.5 while akaganeite of poorer crystallinity formed at pH0 2 and 3. Akageneite in Gale crater could form from sulfides by both mechanisms: oxidative alteration of sulfide minerals and oxidation-hydrolysis of leached Fe(II). The processes likely occurred during late diagenetic events triggered by interactions of acidic Cl-bearing groundwater with Fe(II) sulfides. Akaganeite in Yellowknife Bay, Gale crater could have formed by Fe(II) oxidation-hydrolysis either as a sole Fe(III) (hydr)oxide at pH<2 or along with ferrihydrite and hematite at 2<pH<4 in Si-enriched conditions. Akaganeite formation at Vera Rubin Ridge, Gale crater could have occurred through oxidative alteration of sulfides in Cl-bearing pH 1.2-1.5 solutions. The presence of well-crystalline akageneite in Vera Rubin Ridge indicates that Fe(II) oxidation-hydrolysis contributed to akageneite formation.

Mars gale crater akaganeite↗
NASA NTRS1978

Static and dynamic cyclic oxidation of 12 nickel-, cobalt-, and iron-base high-temperature alloys

Twelve typical high-temperature nickel-, cobalt-, and iron-base alloys were tested by 1 hr cyclic exposures at 1038, 1093, and 1149 C and 0.05 hr exposures at 1093 C. The alloys were tested in both a dynamic burner rig at Mach 0.3 gas flow and in static air furnace for times up to 100 hr. The alloys were evaluated in terms of specific weight loss as a function of time, and X-ray diffraction analysis and metallographic examination of the posttest specimens. A method previously developed was used to estimate specific metal weight loss from the specific weight change of the sample. The alloys were then ranked on this basis. The burner-rig test was more severe than a comparable furnace test and resulted in an increased tendency for oxide spalling due to volatility of Cr in the protective scale and the more drastic cooling due to the air-blast quench of the samples. Increased cycle frequency also increased the tendency to spall for a given test exposure. The behavior of the alloys in both types of tests was related to their composition and their tendency to form scales. The alloys with the best overall behavior formed alpha-Al2O3 aluminate spinels.

Barrett, C. A.↗
NASA NTRS1986

Oxidation and emittance of superalloys in heat shield applications

Recently developed superalloys that form alumina coatings have a high potential for heat shield applications for advanced aerospace vehicles at temperatures above 1095C. Both INCOLOY alloy MA 956 (of the Inco Alloys International, Inc.), an iron-base oxide-dispersion-strengthened alloy, and CABOT alloy No. 214 (of the Cabot Corporation), an alumina-forming nickel-chromium alloy, have good oxidation resistance and good elevated temperature strength. The oxidation resistance of both alloys has been attributed to the formation of a thin alumina layer (alpha-Al2O3) at the surface. Emittance and oxidation data were obtained for simulated Space Shuttle reentry conditions using a hypersonic arc-heated wind tunnel. The surface oxides and substrate alloys were characterized using X-ray diffraction and scanning and transmission electron microscopy with an energy-dispersive X-ray analysis unit. The mass loss and emittance characteristics of the two alloys are discussed.

Wiedemann, K. E.↗
DOE OSTI2023

Electron Transfer Beyond the Outer Membrane: Putting Electrons to Rest

Extracellular electron transfer (EET) is the physiological process that enables the reduction or oxidation of molecules and minerals beyond the surface of a microbial cell. The first bacteria characterized with this capability were Shewanella and Geobacter, both reported to couple their growth to the reduction of iron or manganese oxide minerals located extracellularly. A key difference between EET and nearly every other respiratory activity on Earth is the need to transfer electrons beyond the cell membrane. The past decade has resolved how well-conserved strategies conduct electrons from the inner membrane to the outer surface. However, recent data suggest a much wider and less well understood collection of mechanisms enabling electron transfer to distant acceptors. This review reflects the current state of knowledge from Shewanella and Geobacter, specifically focusing on transfer across the outer membrane and beyond—an activity that enables reduction of highly variable minerals, electrodes, and even other organisms.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Reaction between Hydrogen and Ferrous/Ferric Oxides at High Pressures and High Temperatures—Implications for Sub-Neptunes and Super-Earths

Abstract Sub-Neptune exoplanets may have thick hydrogen envelopes and therefore develop a high-pressure interface between hydrogen and the underlying silicates/metals. Some sub-Neptunes may convert to super-Earths via massive gas loss. If hydrogen chemically reacts with oxides and metals at high pressures and temperatures ( P − T ), it could impact the structure and composition of the cores and atmospheres of sub-Neptunes and super-Earths. While H 2 gas is a strong reducing agent at low pressures, the behavior of hydrogen is unknown at the P − T expected for sub-Neptunes’ interiors, where hydrogen is a dense supercritical fluid. Here we report experimental results of reactions between ferrous/ferric oxides and hydrogen at 20–40 GPa and 1000–4000 K utilizing the pulsed laser-heated diamond-anvil cell combined with synchrotron X-ray diffraction. Under these conditions, hydrogen spontaneously strips iron off the oxides, forming Fe-H alloys and releasing oxygen to the hydrogen medium. In a planetary context where this reaction may occur, the Fe-H alloy may sink to the metallic part of the core, while released oxygen may stabilize as water in the silicate layer, providing a mechanism to ingas hydrogen to the deep interiors of sub-Neptunes. Water produced from the redox reaction can also partition to the atmosphere of sub-Neptunes, which has important implications for understanding the composition of their atmospheres. In addition, super-Earths converted from sub-Neptunes may contain a large amount of hydrogen and water in their interiors (at least a few wt% H 2 O). This is distinct from smaller rocky planets, which were formed relatively dry (likely a few hundredths wt% H 2 O).

58 GEOSCIENCES↗
NASA NTRS1997

Electron Spin Resonance (ESR) Studies of Returned Comet Nucleus Samples

Electron Spin Resonance (ESR) studies have been carried out on organic and inorganic free radicals generated by gamma-ray and/or UV-irradiation and trapped in ice matrices. It is suggested that the concentration of these free radicals together with their thermal stability can be used as an accurate built-in geothermometer and radiation probe for returned comet nucleus sample studies. ESR studies have also been carried out on paramagnetic (Mn(2+), Ti(3+), and Fe(3+)) and ferromagnetic (ferric oxide and metallic iron) centers known to be present in terrestrial and extraterrestrial samples. The presence or absence of these magnetic centers coupled with their characteristic ESR lineshape can be used to investigate the shock effects, quenching/cooling rate and oxidation-reduction conditions in the formation and subsequent evolution of returned comet nucleus samples.

Tsay, Fun-Dow↗
NASA NTRS2000

Paleoproterozoic snowball earth: extreme climatic and geochemical global change and its biological consequences

Geological, geophysical, and geochemical data support a theory that Earth experienced several intervals of intense, global glaciation ("snowball Earth" conditions) during Precambrian time. This snowball model predicts that postglacial, greenhouse-induced warming would lead to the deposition of banded iron formations and cap carbonates. Although global glaciation would have drastically curtailed biological productivity, melting of the oceanic ice would also have induced a cyanobacterial bloom, leading to an oxygen spike in the euphotic zone and to the oxidative precipitation of iron and manganese. A Paleoproterozoic snowball Earth at 2.4 Giga-annum before present (Ga) immediately precedes the Kalahari Manganese Field in southern Africa, suggesting that this rapid and massive change in global climate was responsible for its deposition. As large quantities of O(2) are needed to precipitate this Mn, photosystem II and oxygen radical protection mechanisms must have evolved before 2.4 Ga. This geochemical event may have triggered a compensatory evolutionary branching in the Fe/Mn superoxide dismutase enzyme, providing a Paleoproterozoic calibration point for studies of molecular evolution.

Earth (Planet)↗
NASA NTRS1984

A study of tetrataenite

The tetrataenite in Dayton was examined using conventional transmission (TEM) and analytical electron microscopy (AEM). Tetrataenite was also simulated in terrestrial Fe-Ni alloys through electron irradiation of thin-foil specimens on the high voltage electron microscope (HVEM). The purpose was to correlate the results of the TEM, AEM and HVEM studies on Dayton and on terrestrial iron-nickel alloys to the low temperature iron-nickel phase diagram. Oxide forms spontaneously on the surfaces of thin-foil iron-nickel specimens. By determining the metal/oxide orientation relationships the reflections due to the oxide and the superlattice are distinguished. In Dayaton, the clear taenite (I) is fully ordered until near the cloudy zone interface. The ordered domains ranged in size from 30 to 650 nm with the largest domains corresponding to the highest Ni content and the smallest domain size corresponding to the lowest Ni content. In terrestrial alloys irradiated on the HVEM, the extent of electron irradiation induced ordering was determined as a function of temperature and composition. Ordering occurred in every specimen irradiated.

Reuter, K. B.↗
NASA NTRS1987

On the spectral reflectance properties of materials exposed at the Viking landing sites

Bidirectional reflectances for the blue, green, and red channels were determined for 31 block and soil exposures imaged by the two Viking Lander Cameras on Mars and were calibrated to within 10 percent uncertainties. The observed variations in bidirectional reflectance in the visible and relative brightness in the IR could be best explained by varying degrees of oxidation and ferric iron crystallinity, while most block surfaces had reflectances consistent with thin to optically thick covers of palagonitic material. These results are consistent with the conclusion that blocks seen at both sites are mafic rocks coated to varying thicknesses with amorphous oxidized material. The differences observed in reflectance properties for common block surfaces and common soils imply that local weathering of blocks has not contributed significantly to the soil exposed at the landing sites.

Guinness, Edward A.↗
DOE OSTI2026

Experimental Benchmarking for High-Reproducibility, Cross-Institutional Evaluation of Iron Redox Electrochemistry

We present a practical case study standardizing experimental protocols between collaborators with the goal of understanding ferrous iron (Fe 2+ ) chemistry and improving the iron deposition reaction for energy-efficient, electrochemical iron production. The study of iron reactions can be difficult, as aqueous iron electrolytes exhibit complex behaviors that can lead to differing interpretation of ostensibly similar experiments. The question we want to answer: are we studying the same chemistry? Our protocols address inherent challenges such as the tendency for Fe 2+ to spontaneously oxidize to ferric iron (Fe 3+ ) and the production of hydrogen at the potentials of interest. Our standardized protocol, executed by four collaborators in different labs and institutions, yields high-reproducibility results, and identified glassy carbon electrode surface quality and Fe 3+ impurities in the salt as key factors with outsized effects on cyclic voltammetry measurements. The process of developing the protocols helped to troubleshoot underlying issues that created poorer reversibility and reproducibility. This study highlights the fact that even nominally straightforward electrochemical systems can yield vastly different outcomes due to small differences in experimental preparation and serves as a useful example for creating transparent and achievable standards for the generation of reliable datasets that can be widely used and shared.

Ketter, Benjamin [Argonne National Laboratory (ANL↗
DOE OSTI2023

Reactive iron, not fungal community, drives organic carbon oxidation potential in floodplain soils

Wetlands host ∼20% of terrestrial organic carbon and serve as a major sink for atmospheric carbon. Anoxic soils and sediments accrue soil organic carbon (SOC) partly by hampering the activity of extracellular oxidative enzymes that break down phenolic polymers. Upon aeration, fungal-driven oxidative enzymatic depolymerization and microbial respiration of released monomers ensue. Redox-active metals can simultaneously catalyze abiotic nonspecific oxidation of SOC, notable examples including Mn(III) or Fe(II) through Fenton-like, hydrogen peroxide-catalyzed oxidative radical production. However, the extent of reactive metal contributions to biotic and abiotic SOC degradation is not understood in the context of natural environments with diverse redox chemistry. We tested the relative contributions of fungi, Mn(III) and Fe(II) to phenolic substrate (L-DOPA) oxidation in floodplain soils representing a range of transient redox conditions driven by permanent vs. periodic flooding. Phenol oxidative potential was highest in permanently flooded soils with fewer fungal taxa known for observed (per)oxidase activity and instead correlated with HCl-extractable Fe(II), Fe(total) and Fe(II)/Fe(total), suggesting a specific role of Fe(II). Fe(II) additions enhanced phenol oxidative potential in sterilized and non-sterilized soils in the presence of hydrogen peroxide, indicating abiotic Fe-mediated radical chemistry could significantly enhance wetland SOC oxidative depolymerization throughout redox-active floodplain soils. Fungal community composition did not correlate to phenol oxidative potential overall and only more oxic soils adjacent to the river with diverse fungal communities showed declining oxidative potential after sterilization. Mn(III) addition did not significantly enhance phenol oxidative potential across all soils, although it appeared to drive fungal-mediated oxidative potential in the most aerated floodplain soils. Understanding how metals mediate SOC depolymerization as abiotic oxidants or microbially-harnessed enzyme cofactors and substrates in soils under variable hydrologic controls will improve our ability to represent depolymerization in terrestrial carbon models in wetland and other frequently saturated soils.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2022

Anoxic photochemical weathering of pyrite on Archean continents

Sulfur is an essential element of life that is assimilated by Earth’s biosphere through the chemical breakdown of pyrite. On the early Earth, pyrite weathering by atmospheric oxygen was severely limited, and low marine sulfate concentrations persisted for much of the Archean eon. Here, we show an anoxic photochemical mechanism of pyrite weathering that could have provided substantial amounts of sulfate to the oceans as continents formed in the late Archean. Pyrite grains suspended in anoxic ferrous iron solutions produced millimolar sulfate concentrations when irradiated with ultraviolet light. The Fe2+(aq) was photooxidized, which, in turn, led to the chemical oxidation of pyritic sulfur. Additional experiments conducted with 2.68 Ga shale demonstrated that photochemically derived ferric iron oxidizes and dissolves sedimentary pyrite during chemical weathering. The results suggest that before the rise of atmospheric oxygen, oxidative pyrite weathering on Archean continents was controlled by the exposure of land to sunlight.

Jihua Hao↗
DOE OSTI2021

Iron speciation in blast furnace slag cements

Slag-containing pastes and concretes were analysed by element-specific synchrotron-based techniques to determine the speciation of iron on crushed materials through spatially resolved micro-spectroscopic studies. The investigated cement samples were hydrated either in the laboratory, or exposed to river or sea water. Metallic iron, along with minor proportions of iron sulphide and magnetite was detected in the laboratory sample. Iron sulphide, goethite, and siliceous hydrogarnet were discovered in the blended slag cements hydrated in contact with river water for up to 7 years. In contrast, no Fe(0) was observed in blended concretes exposed to sea water. Instead, iron sulphide, iron(II)-hydroxide and -oxide, hematite, magnetite, siliceous hydrogarnet, and goethite were detected as well as ilmenite (FeTiO{sub 3}) in the aggregates. The strong acceleration of Fe oxidation in samples exposed to sea water and the long-term passivation observed in the other samples indicate comparable processes as those occurring on steel bars.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Soil properties explain tree growth and mortality, but not biomass, across phosphorus-depleted tropical forests

We observed strong positive relationships between soil properties and forest dynamics of growth and mortality across twelve primary lowland tropical forests in a phosphorus-poor region of the Guiana Shield. Average tree growth (diameter at breast height) increased from 0.81 to 2.1 mm yr -1 along a soil texture gradient from 0 to 67% clay, and increasing metal-oxide content. Soil organic carbon stocks in the top 30cm ranged from 30 to 118 tons C ha -1 , phosphorus content ranged from 7 to 600 mg kg -1 soil, and the relative abundance of arbuscular mycorrhizal fungi ranged from 0 to 50%, all positively correlating with soil clay, and iron and aluminum oxide and hydroxide content. In contrast, already low extractable phosphorus (Bray P) content decreased from 4.4 to <0.0 mg kg -1 in soil with increasing clay content. A greater prevalence of arbuscular mycorrhizal fungi in more clayey forests that had higher tree growth and mortality, but not biomass, indicates that despite the greater investment in nutrient uptake required, soils with higher clay content may actually serve to sustain high tree growth in tropical forests by avoiding phosphorus losses from the ecosystem. Our study demonstrates how variation in soil properties that retain carbon and nutrients can help to explain variation in tropical forest growth and mortality, but not biomass, by requiring niche specialization and contributing to biogeochemical diversification across this region.

54 ENVIRONMENTAL SCIENCES↗