Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INTERMETALLIC COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Fe–Ni solid solutions in nano-size dimensions: Effect of hydrogen annealing

Highlights: • Fe–Ni solid solution with nano-size dimensions were prepared and characterized. • Both as prepared and hydrogenated solid solutions have FCC structure of Ni. • Paramagnetic and ferromagnetic domains coexist in these samples. - Abstract: Nanoparticles of Ni{sub 0.50}Fe{sub 0.50} and Ni{sub 0.75}Fe{sub 0.25} alloys were prepared by chemical reduction in ethylene glycol medium. XRD and {sup 57}Fe Mössbauer studies have confirmed the formation of Fe–Ni solid solution in nano-size dimensions with FCC structure. These samples consist of both ferromagnetic and paramagnetic domains which have been attributed to the coexistence of large and small particles as confirmed by atomic force microscopic (AFM) and {sup 57}Fe Mössbauer spectroscopic studies. Improved extent of Fe–Fe exchange interaction existing in Ni{sub 0.50}Fe{sub 0.50} alloy compared to Ni{sub 0.75}Fe{sub 0.25} alloy explains the observed increase in the relative extent of ferromagnetic domains compared to paramagnetic domains in the former sample. Increase in the relative extent of ferromagnetic domains for hydrogenated alloys is due to increase in particle size brought about by the high temperature activation prior to hydrogenation.

36 MATERIALS SCIENCE↗

Development in corrosion resistance by microstructural refinement in Zr-16 SS 304 alloy using suction casting technique

Highlights: • Grain refinement was made in Zr–16 wt.% SS alloy while prepared by suction casting process. • Distribution of Laves phase, e.g., Zr{sub 2}(Fe, Cr) was raised in suction cast (SC) Zr–16 wt.% SS. • Corrosion resistance was improved in SC alloy compared to that of arc-melt-cast alloy. • Grain refinement in SC alloy assisted for an increase in its corrosion resistance. - Abstract: Zirconium (Zr)-stainless steel (SS) hybrid alloys are being considered as baseline alloys for developing metallic-waste-form (MWF) with the motivation of disposing of Zr and SS base nuclear metallic wastes. Zr–16 wt.% SS, a MWF alloy optimized from previous studies, exhibit significant grain refinement and changes in phase assemblages (soft phase: Zr{sub 2}(Fe, Cr)/α-Zr vs. hard phase: Zr{sub 3}(Fe, Ni)) when prepared by suction casting (SC) technique in comparison to arc-cast-melt (AMC) route. Variation in Cr-distribution among different phases are found to be low in suction cast alloy, which along with grain refinement restricted Cr-depletion at the Zr{sub 2}(Fe, Cr)/Zr interfaces, prone to localized attack. Hence, SC alloy, compared to AMC alloy, showed lower current density, higher potential at the breakdown of passivity and higher corrosion potential during polarization experiments (carried out under possible geological repository environments, viz., pH 8, 5 and 1) indicating its superior corrosion resistance.

36 MATERIALS SCIENCE↗

Optical properties of bimetallic Au-Cu nanocrystals embedded in glass

Highlights: • Bimetallic Au-Cu/Au-Cu sosoloid nanocrystals embedded in glass have been synthesized. • We achieved good size control of the nanocrystals. • The glasses with bimetallic nanoparticles exhibit enhanced for NLO. • The mechanisms on the nonlinear effects of the obtained glasses are discussed. - Abstract: Bimetallic gold-copper and gold-copper solid solutions nanocrystals (NCs) with orthorhombic morphologies were successfully embedded in sodium borosilicate glass; these materials were fabricated via a facile and synthetic sol-gel technique. Microstructural investigations demonstrate that the Au-Cu intermetallic nanostructure is generated in the glass host. Z-scan technique was applied to reveal the third-order nonlinear optical properties of the as-obtained glasses at the wavelength of 800 nm. The as-synthesized glasses exhibit similar nonlinear behaviors with reverse saturation absorption effects and self-focusing performances. The third-order nonlinear susceptibility χ{sup (3)} values were optimized by tuning the sizes of the Au-Cu NCs. The χ{sup (3)} of Au-Cu(1), Au-Cu(2) and Au-Cu(3) measured to be 3.1 × 10{sup −12}, 5.4 × 10{sup −12}, and 4.4 × 10{sup −12} esu for the single-pulse energy of 1 μJ. We have discussed the nonlinear optical mechanism of Au-Cu sodium borosilicate glass that may be due to the quantum confinement effects and surface plasmon resonance effects.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nucleation and growth behaviors of hydriding and dehydriding reactions of Mg2Ni

Highlights: • Preparation of Mg{sub 2}Ni by sintering under Ar in a stainless steel crucible at 823 K. • Application of Johnson-Mehl equation for the nucleation and growth mechanism. • Reverse dependences on temperature of initial hydriding rate and quantity of H absorbed for 60 min. • Hydriding and dehydriding reactions progressed by a nucleation and growth mechanism. - Abstract: Mg{sub 2}Ni has drawn attention due to its high reaction rates, good reversibility, and possibility to be applied as a negative electrode in the Ni-MH (metal hydride) batteries. Mg{sub 2}Ni samples were prepared by sintering under Ar in a stainless-steel crucible at 823 K. Johnson-Mehl equation for nucleation and growth mechanism was applied to the behaviors of hydriding and dehydriding reactions of Mg{sub 2}Ni. At 571 K under 30 bar H{sub 2}, the activation of the Mg{sub 2}Ni sample was completed at the number of cycles of three (n = 3). At n = 3, hydrided fractions of the sample were 0.51 (1.92 wt% H) at 0.50 min and 0.90 (3.38 wt% H) at 2.00 min. Reverse temperature dependences of the initial hydriding rate and the quantity of hydrogen absorbed for 60 min appeared from 571 K to 620 K. Hydriding and dehydriding reactions progressed by the nucleation and growth mechanism and could be expressed by the Johnson-Mehl equation.

36 MATERIALS SCIENCE↗

Elucidating the microscopic origin of electrochemical corrosion and electrical conductivity by lattice response to severe plastic deformation in Al-Mn-Si alloy

Highlights: • Al-Mn-Si specimens were underwent severe plastic deformation by CGP and cold-rolling and their combined routes. • Microscopical observations depicted particles' fragmentation and non-preferential distribution under heavy straining. • XRD analysis revealed dislocations annihilation and lattice swelling (d-spacing increase) due to dynamic recrystallization. • Polarization outputs disclosed direct correlation of corrosion behavior with dislocations density. • Four-point probe test proved that electrical conductivity was a function of lattice d-spacing. - Abstract: Al-Mn-Si specimens were underwent SPD by CGP, cold-rolling and their combined paths. Acquired OM and SEM micrographs revealed that random distribution of intermetallic precipitates beside their fragmentation under heavy imposed strains deteriorated particles’ influence on the electrochemical corrosion and inhibited pitting. Analysis of XRD patterns pointed out that post-rolling of CGPed sheets resulted in dynamic annihilation of dislocations and accordingly crystal lattice swelling (d-spacing increase) due to dynamic recrystallization. From polarization results, crystallites’ refinement along with density increment of sub-grain boundaries within structure as a consequence of SPD beside dislocation density enhancement accelerated corrosion. Outputs of four-point probe electrical conductivity examination indicated that apart from the employed processing, lattice compaction and atomic layers approach would limit the electrons’ mobility space and hence reduce the conductivity of material. In this regard, combined effects of CGP and rolling as employed dual-straining route on Al-Mn-Si alloy enhanced the electrical conductivity by d-spacing growth.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermo-mechanical behavior of hypoeutectic Ni-Y-Zr alloys

Microstructure refinement and optimized alloying can improve metallic alloy performance: stable nanocrystalline (NC) alloys with immiscible second phases, e.g., Cu-Ta, are stronger than unstable NC alloys and their coarse-grained (CG) counterparts, but higher melting point matrices are needed. Hypoeutectic, CG Ni-Y-Zr alloys were produced via arc-melting to explore their potential as high-performance materials. Microstructures were studied to determine phases present, local composition and length scales, while heat treatments allowed investigating microstructural stability. Alloys had a stable, hierarchical microstructure with ~250 nm ultrafine eutectic, ~10 µm dendritic arm spacing and ~1 mm grain size. Hardness and uniaxial compression tests revealed that mechanical properties of Ni-0.5Y-1.8Zr (in wt%) were comparable to Inconel 617 despite the small alloying additions, due to its hierarchical microstructure. Here, uniaxial compression at 600 °C showed that ternary alloys outperformed Ni-Zr and Ni-Y binary alloys in flow stress and hardening rates, which indicates that the Ni 17 Y 2 phase was an effective reinforcement for the eutectic, which supplemented the matrix hardening due to increased solubility of Zr. Results suggest that ternary Ni-Y-Zr alloys hold significant promise for high temperature applications.

36 MATERIALS SCIENCE↗

Formation of Oxidation-Resistant Cu-Mg Coatings on (001) Cu for Oxide Superconducting Tapes

The formation of oxidation-resistant buffer layers on (001) oriented Cu for coated high-temperature superconducting tape applications was investigated. The approach employed Cu/Mg multilayer precursor films that were subsequently annealed to form either Mg-doped fcc Cu or intermetallic Cu2 Mg. The precursor consisted of an Mg/Cu multilayer stack with 5 each of 25 nm thick Mg and 25 nm thick Cu layers which were grown at room temperature by sputter deposition. At annealing temperature of 400 C, formation of the intermetallic Cu2 Mg was observed. X-ray diffraction showed that the Cu2 Mg (100) oriented grains were epitaxial with respect to the underlying Cu film, possessing a cube-on-cube orientation. In order to test oxidation resistance, CeO2 films were deposited at elevated temperature on Ni/(Cu,Mg)/Cu/MgO structures. In case of the CeO2 film on Ni/Cu/MgO, significant surface roughness due to the metal oxidation is observed. In contrast, no surface roughness is observed in the SEM images for the CeO2/Ni/(Cu,Mg)/Cu/MgO structure.

36 MATERIALS SCIENCE↗

Chemical heterogeneity modulated zero thermal expansion alloy over super-wide temperature range

Chemical heterogeneity is usually avoided in solution chemistry, but it may still occur with sometimes dramatic effects on target materials and their properties. Here, we propose chemical heterogeneity as a counterintuitive strategy to design high-performance zero thermal expansion (ZTE) alloys. We apply this approach in a Hf-Ti-Fe alloy with excess Fe in the Hf/Ti sublattice and produce Hf/Ti concentration alternations at the micro level. Such chemical heterogeneity regulates local magnetic interactions in alloy and triggers a dispersed magnetic phase transition that modulates the thermal expansions at the micro level and hence results in a remarkable ZTE behavior over a super-wide temperature window from 10 to 480 K. This mechanism is supported by comprehensive studies on morphological microstructures, crystal and magnetic structures, and theoretical calculations. The strategy of local chemical heterogeneity opens up an avenue to design ZTE and the related functional materials directly via microstructure engineering.

36 MATERIALS SCIENCE↗

Diffusion-Limited Formation of Nonequilibrium Intermetallic Nanophase for Selective Dehydrogenation

In this work, nonequilibrium intermetallic phases in the nanoscale were realized by diffusion-controlled solid-state transformation, forming SiO 2 supported NPs with Pd core and a CsCl type Pd 1 M 1 shell, where M is Sn or Sb. The core–shell geometry is identified from scanning transmission electron microscopy and infrared spectroscopy and the crystal structure is confirmed from in situ synchrotron X-ray diffraction and X-ray absorption spectroscopy. The highly symmetric Pd 1 M 1 intermetallic phase has not been reported previously and contains catalytic ensembles with high selectivity toward dehydrogenation of propane. The kinetically limited solid-state reaction is generally applicable to nanoparticle synthesis and could produce materials with desired structures and properties beyond conventional structural limits

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Distinct atomic structures of the Ni-Nb metallic glasses formed by ion beam mixing

Four Ni-Nb metallic glasses are obtained by ion beam mixing and their compositions are measured to be Ni{sub 77}Nb{sub 23}, Ni{sub 55}Nb{sub 45}, Ni{sub 31}Nb{sub 69}, and Ni{sub 15}Nb{sub 85}, respectively, suggesting that a composition range of 23-85 at. % of Nb is favored for metallic glass formation in the Ni-Nb system. Interestingly, diffraction analyses show that the structure of the Nb-based Ni{sub 31}Nb{sub 69} metallic glass is distinctly different from the structure of the Nb-based Ni{sub 15}Nb{sub 85} metallic glass, as the respective amorphous halos are located at 2{theta}{approx_equal}38 and 39 deg. To explore an atomic scale description of the Ni-Nb metallic glasses, an n-body Ni-Nb potential is first constructed with an aid of the ab initio calculations and then applied to perform the molecular dynamics simulation. Simulation results determine not only the intrinsic glass forming range of the Ni-Nb system to be within 20-85 at. % of Nb, but also the exact atomic positions in the Ni-Nb metallic glasses. Through a statistical analysis of the determined atomic positions, a new dominant local packing unit is found in the Ni{sub 15}Nb{sub 85} metallic glass, i.e., an icositetrahedron with a coordination number to be around 14, while in Ni{sub 31}Nb{sub 69} metallic glasses, the dominant local packing unit is an icosahedron with a coordination number to be around 12, which has been reported for the other metallic glasses. In fact, with increasing the irradiation dose, the Ni{sub 31}Nb{sub 69} metallic glasses are formed through an intermediate state of face-centered-cubic-solid solution, whereas the Ni{sub 15}Nb{sub 85} metallic glass is through an intermediate state of body-centered-cubic-solid solution, suggesting that the structures of the constituent metals play an important role in governing the structural characteristics of the resultant metallic glasses.

36 MATERIALS SCIENCE↗

Photoluminescence enhancement in quaternary III-nitrides alloys grown by molecular beam epitaxy with increasing Al content

Room temperature photoluminescence and optical absorption spectra have been measured in wurtzite In{sub x}Al{sub y}Ga{sub 1-x-y}N (x{approx}0.06, 0.02<y<0.27) layers grown by molecular beam epitaxy. Photoluminescence spectra show both an enhancement of the integrated intensity and an increasing Stokes shift with the Al content. Both effects arise from an Al-enhanced exciton localization revealed by the S- and W-shaped temperature dependences of the photoluminescence emission energy and bandwidth, respectively. Present results point to these materials as a promising choice for the active region in efficient light emitters. An In-related bowing parameter of 1.6 eV was derived from optical absorption data.

36 MATERIALS SCIENCE↗

Surface photovoltage spectroscopy analyses of Cd{sub 1-x}Zn{sub x}Te

Cd{sub 1-x}Zn{sub x}Te alloys have been studied by surface photovoltage spectroscopy (SPS) and energy dispersive spectroscopy (EDS). The analyses of surface photovoltage spectra have been perfomed at near and above band gap energies. Surface recombination effects on the surface photovoltage have been investigated. SPS analyses of Cd{sub 1-x}Zn{sub x}Te alloys with different surface conditions have shown that the surface recombination velocity significantly affects the SPS determination of the material band gap. Accounting for this and preparing the surfaces accordingly, SPS spectra of Cd{sub 1-x}Zn{sub x}Te samples have allowed an accurate determination of the optical band gap as a function of the Zn concentration, determined via EDS analyses. The local increases in the density of states associated with band structure features in Cd{sub 1-x}Zn{sub x}Te alloys have been investigated by SPS spectra in the above band gap energy range.

36 MATERIALS SCIENCE↗

Preparation of Functionally Graded Materials (FGMs) Using Coal Fly Ash and NiCr-Based Alloy Powder by Spark Plasma Sintering (SPS)

Functionally Graded Materials (FGMs) were prepared by spark plasma sintering (SPS) using coal fly ash and NiCr alloy powder. The coal fly ash was produced by the Misumi Coal Thermal Power Station (Chugoku Electric Power Co., Inc.), with 80 wt% nickel and 20 wt% chromium (Fukuda Metal Foil and Powder Co., Ltd.) used as source materials. The sintering temperature in the graphite die was 1000 deg. C. X-ray diffraction patterns of the sintered coal fly ash materials indicated that mullite (3Al{sub 2}O{sub 3}{center_dot}2SiO{sub 2}) and silica (SiO{sub 2}) phases were predominant. Direct joining of coal fly ash and NiCr causes fracture at the interface. This is due to the mismatch in the thermal expansion coefficients (CTE). A crack in the FGM was observed between the two layers with a CTE difference of over 4.86x10{sup -6} K{sup -1}, while a crack in the FGM was difficult to detect when the CTE difference was less than 2.77x10{sup -6} K{sup -1}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multiphase Model of Heat and Mass Transport during Laser Alloying of Iron with Electrodeposited Chromium Layer

The aim of this research was to study the laser alloying process of iron with chromium. In the paper, a multiphase model of mass and heat transfer for the laser alloying is presented. Laser melting of the chromium layer and the substrate was performed using a continuous laser source operated with a TEM{sub 10} mode, with constant beam diameter ({phi}), scanning velocity (V) and varied output beam power. The partial differential equations of the conservation of mass, momentum and energy in the melted pool for multiphase system were solved. The distribution of chromium in iron after laser alloying was obtained by including the Volume of Fluid algorithm in the model. The results of the computations were compared with the experimental evaluation of the microstructure and the chromium concentration, which were based on scanning electron microscopy and x-ray microanalysis (Energy Dispersive Spectroscopy) of the laser alloyed layers. The comparison of computational calculations and experimental results is presented and a good accuracy of the proposed model is shown.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Titanium Carbides Coatings for Wear Resistant Biomedical Devices: Manufacturing and Modeling

Deposition of Titanium Carbide coatings on Ti6Al4V substrate, through the reactive magnetron sputtering technique is here presented. The mechanical characterization of the coatings has been carried out through a set of indentation tests at different maximum applied loads. The elastic stiffness as well as the hardness of the coating-substrate system indicate that these coatings are suitable candidates for wear resistance applications in the orthopaedic field. Numerical simulation of the indentation tests allowed the identification of the constitutive parameters of the titanium carbide. Good agreement was achieved between experimental and numerical results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗