Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Hunting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Arctic polar stratospheric cloud observations by airborne lidar

Lidar observations obtained from January 24 to February 2, 1989, during the Airborne Arctic Stratospheric expedition (AASE) mission further support the existence of two distinct classes (Types 1 and 2) of polar stratospheric clouds (PSCs). Most of the Type 1 PSCs observed were formed by rapid adiabatic cooling and exhibited very low depolarization ratios and low-to-intermediate scattering ratios. Type 2 PSCs were observed in regions of lowest temperature and showed much larger depolarization and scattering ratios, as would be expected from larger ice crystals. PSCs with low scattering ratios but moderate depolarization ratios were observed near the center of the vortex on one flight. These may have been either sparse Type 2 PSCs or Type 1 PSCs formed by less rapid cooling.

Mccormick, M. P.↗
NASA NTRS1990

Dual-polarization airborne lidar observations of polar stratospheric cloud evolution

Dual-polarization 0.532 micron lidar data show systematic polar stratospheric cloud (PSC) evolution along a portion of the Airborne Arctic Stratospheric Expedition DC-8 flight of January 31, 1989. This flight leg was roughly aligned with air parcel motion on isentropic surfaces from 400-500 K, where the local adiabatic cooling rate was about 20 K/day. Type 1 PSCs show low depolarization ratios and scattering ratios which approach intermediate limiting values as ambient temperature decreases. These data suggest that Type 1 particles formed by rapid cooling may be nearly spherical and are restricted in size by partitioning of a limited HNO3 vapor supply among many competing growth sites. Type 2 PSCs appear at temperatures below estimated local frost points with increases in depolarization and scattering typical of larger ice crystals.

Poole, L. R.↗
NASA NTRS1989

Detection of changes in leaf water content using near- and middle-infrared reflectances

A method to detect plant water stress by remote sensing is proposed using indices of near-IR and mid-IR wavelengths. The ability of the Leaf Water Content Index (LWCI) to determine leaf relative water content (RWC) is tested on species with different leaf morphologies. The way in which the Misture Stress Index (MSI) varies with RWC is studied. On test with several species, it is found that LWCI is equal to RWC, although the reflectances at 1.6 microns for two different RWC must be known to accurately predict unknown RWC. A linear correlation is found between MSI and RWC with each species having a different regression equation. Also, MSI is correlated with log sub 10 Equivalent Water Thickness (EWT) with data for all species falling on the same regression line. It is found that the minimum significant change of RWC that could be detected by appying the linear regression equation of MSI to EWT is 52 percent. Because the natural RWC variation from water stress is about 20 percent for most species, it is concluded that the near-IR and mid-IR reflectances cannot be used to remotely sense water stress.

Hunt, E. Raymond, Jr.↗
NASA NTRS1989

The structure of sheared turbulence near a plane boundary

The effects of shear on the structure of turbulence near a plane boundary are examined. Inhomogeneous rapid distortion theory is applied to a uniform-shear boundary layer (USBL) with a slip velocity condition at the surface. The effects of blocking the vertical component of the turbulence by the boundary in a USBL are compared with the effects in a shear-free boundary layer. It is shown that the blocking is only slightly modified by the presence of shear. The shear does alter the way in which the boundary influences the horizontal components and the turbulent shear stress near the horizontal component.

Lee, Moon Joo↗
NASA NTRS1990

Wet chemical passivation of YBa2Cu3O(7-x)

Wet chemical techniques are described for treatment of YBa2Cu3O(7-x) surfaces, which result in the formation of native compounds known to have little or no reactivity to water. Suitable native compounds include CuI, BaSO4, CuS, Cu2S, YF3, and the oxalates. Formation of surface layers in which these nonreactive native compounds are major constituents is verified with X-ray photoelectron spectroscopy (XPS) measurements on YBa2Cu3O(7-x) films treated with dilute solutions of HI, H2SO4, Na2S, HF, or H2C2O4. No significant changes are observed in the XPS spectra when the sulfide, sulfate, or oxalate films are dipped in water, while the iodide and fluoride films show evidence of reaction with water. X-ray diffraction measurements show that the superconducting phase is absent in the sulfide film, but is unaffected by the oxalate and sulfate treatments.

Vasquez, R. P.↗
NASA NTRS1990

Electrical characterization of chemically modified YBa2Cu3O(7-x) surfaces

Results on electrical characterization of YBa2Cu3O(7-x) thin-film surfaces treated with a Br/ethanol chemical etch are presented. Electrical measurements of YBa2Cu3O(7-x)/Au/Nb device structures fabricated using polycrystalline, post-annelaed YBa2Cu3O(7-x) films with Br-etched surfaces, show improvements of approximately one or two orders of magnitude in current densities and resistivities (resistance-area products) relative to unetched devices. The existence of supercurrents in these structures has been confirmed by observation of the ac Josephson effect, and by magnetic field and temperature studies of the critical currents. The Br-etch process has produced 10 x 10 sq micron devices with critical current densities greater than 400 A/sq cm and resistivities as low as 4 x 10 to the -7th ohm/sq cm.

Hunt, B. D.↗
NASA NTRS1991

Edge-Geometry NbN/MgO/NbN Tunnel Junctions

Superconductor/insulator/superconductor (SIS) tunnel junctions fabricated with base and counter electrodes of NbN separated by thin layers of MgO. Useful as submillimeter-wave mixers and fast switches. Use of edge geometry to define small junction makes possible to fabricate junction by process including conventional photolithography.

Hunt, Brian D.↗
NASA NTRS1990

A synopsis of Langley Research Center's lidar effort for the 1986 FIRE IFO

The lidar data obtained by the Langley Aircraft Lidar in October 1986 in Wisconsin is being reduced in a transparent, simple fashion and will be published in its reduced form in a NASA Reference Publication (RP). This reduced data will also be submitted to the FIRE data archives. Some of this reduced data will be presented at the FIRE FSET Workshop to acquaint the science team with the data format to be used in the archive and the upcoming catalog contained in the RP. A new method was utilized in Wisconsin for obtain the depolarization ratio of aerosols. This method involves using a half-wave plate to calibrate the lidar under field conditions. The theory behind this technique will be presented at this workshop as well as some of the lidar calibration results. The lidar calibration will be utilized in interpreting some of the dual polarization lidar data obtained during the IFO in Wisconsin. Some of these data are also discussed. A continuous wave laser lab-type lidar simulator was constructed during the previous year. One of the primary reasons for the construction of the simulator was to attempt dual-polarization lidar-like calibrations under laboratory, rather than field conditions. The data collected by this system was used to experimentally check and thus, inspire confidence in the algorithms being used to interpret the lidar data obtained in the field. A computer program which simulates noisy lidar data was used as a part of this effort in order to obtain some feel for the noise in the inversion parameters as a function of noise in the actual measurements. The lidar simulation will be described in addition to presenting some of the lab-generated calibration data.

Alvarez, Jose M.↗
NASA NTRS1990

The new FIRE cloud lidar at Langley Research Center

Using the Langley Aircraft Lidar for cirrus cloud observations at Langley Research Center in Hampton, Virginia is overkill both in terms of the actual lidar and the people required to run the system. A small lidar system to be used specifically for cloud probing was designed and constructed at Langley in 1987. This lidar is presently being used to collect the FIRE ETO (Extended Time Observation) data at Langley. A description of the new FIRE Cloud Lidar System is presented. The data collected by this lidar is discussed as well as some of the cloud statistics emerging from the data. A brief synopsis of system performance is also given.

Alvarez, Jose M.↗
NASA NTRS1990

Hardware verification at Computational Logic, Inc.

The following topics are covered in viewgraph form: (1) hardware verification; (2) Boyer-Moore logic; (3) core RISC; (4) the FM8502 fabrication, implementation specification, and pinout; (5) hardware description language; (6) arithmetic logic generator; (7) near term expected results; (8) present trends; (9) future directions; (10) collaborations and technology transfer; and (11) technology enablers.

Brock, Bishop C.↗
NASA NTRS1990

Development of components for submillimeter wave heterodyne radiometers at JPL

Components for the key elements of submillimeter wave heterodyne receivers are described. The devices and components are inherently space qualifiable having low power and mass needs and exhibiting robustness. Nb and NbN superconductor insulator superconductor (SIS) tunnel junctions are selected for the nonlinear mixing element because of their robustness. NbN exhibits a large superconducting bandgap, allowing operation in excess of 1500 GHz. Both waveguide mounts, for the lower frequencies and planar antenna mixer mounts for the higher frequency range, are used. Quasi-optical components are used for frequency multiplexing and combining.

Frerking, Margaret A.↗
NASA NTRS1991

Report on the formal specification and partial verification of the VIPER microprocessor

The formal specification and partial verification of the VIPER microprocessor is reviewed. The VIPER microprocessor was designed by RSRE, Malvern, England, for safety critical computing applications (e.g., aircraft, reactor control, medical instruments, armaments). The VIPER was carefully specified and partially verified in an attempt to provide a microprocessor with completely predictable operating characteristics. The specification of VIPER is divided into several levels of abstraction, from a gate-level description up to an instruction execution model. Although the consistency between certain levels was demonstrated with mechanically-assisted mathematical proof, the formal verification of VIPER was never completed.

Brock, Bishop↗
NASA NTRS1991

Aerothermal study in an axial compression corner with shock impingement at Mach 6

An experimental study of an axial-compression interior-corner region with shock impingement was conducted in the NASA Langley 20-inch Mach 6 Tunnel to obtain aerodynamic heating rate distributions. The model, a generic hypersonic engine inlet, had a sharp leading edge forebody, cowl, and interchangeable struts with sharp and blunt leading edges. Experiments were conducted at free-stream unit Reynolds numbers of 1.68 x 10 to the 6th and 3.35 x 10 to the 6th per foot for the blunt and sharp-strut configurations, respectively. For the sharp-strut configuration, with and without trips, the peak heating occurred on the cowl, near the compression corner, downstream of the forebody oblique shock impingement region. The peak heating levels, for both the tripped and untripped boundary-layer flows were about 45 and 50 times the reference laminar heating levels, respectively. The peak heating for the blunt leading edge strut model, which was 30 times the reference value, occurred on the cowl, away from the corner, where the bow shock from the strut leading edge intersected the cowl surface.

Venkateswaran, S.↗
NASA NTRS1990

Space Station Freedom attached payloads and commercialization

NASA's Space Station Freedom (SSF) attaches external payloads to its main truss structure via Attached Payload Accommodation Equipment (APAE); this equipment also provides access to such SSF resources as electrical power, command/control, and data handling. In orbit, APAE payloads are installed and maintained by a teleoperated robot or by an astronaut in EVA. Commercialization of EPAE will be accomplished by private companies concerned with the development of materials processing, earth resources and ocean resources monitoring, telecommunications, and industrial services. Attention is given to APAE user-integration activity.

Furio, N.↗
NASA NTRS1991

Airborne remote sensing of canopy water thickness scaled from leaf spectrometer data

The reflectance ratio of the middle-infrared band (MIR) to the near-infrared band (NIR) is linearly related to the log(10) equivalent water thickness (EWT) for single leaves of different morphologies, whereas the MIR/NIR radiance ratio is correlated with the leaf area index (LAI). The hypothesis that the MIR/NIR ratio measures canopy EWT was tested by reanalyzing airborne Thematic Mapper Simulator and field data obtained across a large gradient of LAI in western Oregon, U.S.A. The measured airborne MIR/NIR reflectance ratios for canopies were not significantly different from the predicted ratios using leaf data for canopy EWT, except for two desert woodland sites. The interpretation of the MIR/NIR ratio is scale-dependent, because leaf EWT is determined primarily by variations in LAI.

Hunt, E. Raymond, Jr.↗
NASA NTRS1991

YBa2Cu3O(7-x)/Au/Nb device structures

Fabrication and testing of planar and edge geometry YBaCuO/Au/Nb superconductor/normal-metal/superconductor (SNS) device structures is described. Weak-link devices of this type serve as sensitive probes of the electrical quality of the YBaCuO/Au interface. The devices are fabricated using laser-ablated, in situ, c-axis-oriented YBaCuO thin films, with both annealed and unannealed YBaCuO/Au interfaces. The planar SNS structures are formed by sequential, in situ deposition of YBaCuO, Au, and Nb, followed by etching, planarization, and wiring electrode definition to produce junctions ranging from 5 to 20 micron on a side. Resulting RnA products are 1-10 x 10 to the -8th ohm-sq cm with critical current densities up to 5 kA/sq cm. For the edge geometry devices, the YBaCuO film edges are patterned using Ar ion milling, followed by a low energy ion cleaning step and in situ deposition of Au and Nb. Devices with areas in the 10 to the -7th to 10 to the -8th sq cm range have been fabricated with RnA products lower than 10 to the -8th ohm-sq cm and critical current densities up to 3kA/sq cm. Both types of devices show ac Josephson steps under microwave irradiation. The best results have been obtained with annealed YBaCuO/Au interfaces.

Hunt, B. D.↗
NASA NTRS1990

Development and implementation of a shuttle modal inspection system

One of the major tasks between Space Shuttle flights is inspection of the orbiter subsystems such as control surfaces, vertical tail, and wings. To date, inspection techniques have consisted primarily of visual and X-ray methods, which are not only time consuming but not as comprehensive as desired. Previous shuttle component and orbiter ground modal testing revealed that orbiter component damage could be identified using standard modal test methods. As a result, NASA has procured a dedicated shuttle modal inspection system (SMIS) that will be used for subsystem inspection. This paper presents a background on the use of modal testing to detect shuttle component damage, details on this new implementation, and an early use of the SMIS capability to investigate a potential orbiter vibration problem.

Hunt, David L.↗