Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “H- source”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Comparative M-H Characteristics of 1-5 and 2-17 Type Samarium-Cobalt Permanent Magnets to 300 C

Recent consideration of the use of permanent magnets in space power converters at heat rejection temperatures exceeding 250 C and in miniature high temperature actuators is supporting a search for permanent magnets resistant to demagnetizing forces at high temperature. The present paper investigates the short-term demagnetization resistance to applied bucking fields and at temperatures up to 300 C of SmCo5 type magnets, in the form of 1-cm cubes, from several commercial sources. Quasistatic, 2nd quadrant M-H data taken at selected temperatures are the source of derived plots which are then compared to similar data for previously tested Sm2Co17 type magnets. The 1-5 magnet remanence tends to be about 1.5 kG below that of the 2-17 magnets throughout the temperature range. However, the intrinsic coercivities and M-H curve 'knee-fields' seen in particular 1-5 magnets were considerably above those seen previously in the 2-17 magnets. This superior resistance to demagnetizing fields attainable in 1-5 magnets is also illustrated by safe operating area plots based on the knee-field, the magnetic induction swing and temperature. Comments are made on the possibility that a remanence versus knee-field tradeoff can make 1-5 material competitive with 2-17 in applications where a magnet has to withstand large bucking fields at high temperature.

Niedra, Janis M.↗

THE ABUNDANCE, ORTHO/PARA RATIO, AND DEUTERATION OF WATER IN THE HIGH-MASS STAR-FORMING REGION NGC 6334 I

We present Herschel/HIFI observations of 30 transitions of water isotopologues toward the high-mass star-forming region NGC 6334 I. The line profiles of H{sup 16} {sub 2}O, H{sup 17} {sub 2}O, H{sup 18} {sub 2}O, and HDO show a complex pattern of emission and absorption components associated with the embedded hot cores, a lower-density envelope, two outflow components, and several foreground clouds, some associated with the NGC 6334 complex, others seen in projection against the strong continuum background of the source. Our analysis reveals an H{sub 2}O ortho/para ratio of 3 {+-} 0.5 in the foreground clouds, as well as the outflow. The water abundance varies from {approx}10{sup -8} in the foreground clouds and the outer envelope to {approx}10{sup -6} in the hot core. The hot core abundance is two orders of magnitude below the chemical model predictions for dense, warm gas, but within the range of values found in other Herschel/HIFI studies of hot cores and hot corinos. This may be related to the relatively low gas and dust temperature ({approx}100 K), or time-dependent effects, resulting in a significant fraction of water molecules still locked up in dust grain mantles. The HDO/H{sub 2}O ratio in NGC 6334 I, {approx}2 Multiplication-Sign 10{sup -4}, is also relatively low, but within the range found in other high-mass star-forming regions.

79 ASTRONOMY AND ASTROPHYSICS↗

Final Scientific/Technical Report

The potential for developing commercially viable microbial H 2 -production systems as a renewable source of biofuel has been limited by the need for an anaerobic environment to enable photobiological H 2 -production in capable bacterial and algal species. In this project, we have shown that the cyanobacterium Cyanothece sp. ATCC 51142 has the capacity for highly efficient H 2 -production under natural aerobic conditions. The marine cyanobacterium Cyanothece sp. ATCC 51142 has a diurnal metabolic cycle; photosynthesis and carbon fixation occur during daylight hours and then at night, high rates of respiration create a suboxic intracellular environment that enables O 2 -sensitive processes to occur, including N2-fixation and H 2 -production. We developed a two-stage approach to monitor H 2 -production by Cyanothece 51142. In the first stage, we grew the bacteria aerobically in an alternating 12 hour light/dark cycle. A second ‘incubation’ stage was then carried out in which we took cells from the end of a 12 hour light growth period and incubated them in air-tight vials for a further 12 hours under continuous illumination. Analysis of the headspace in the vial revealed high specific rates of H 2 -production (>150 μmol of H 2 per mg chlorophyll per hour) during this incubation period. Furthermore, the rate of H 2 -production could be enhanced by growing the cells in the presence of high levels of CO 2 or glycerol. We also confirmed that H 2 -production was mediated by the nitrogenase system found in these Cyanothece cells. Interestingly, in the absence of molecular N 2 , nitrogenase systems channel all available electrons towards H 2 -production. Accordingly, when we incubated glycerol-supplemented Cyanothece 51142 cells in the absence of N 2 , the rate of H 2 -production increased up to 467 μmol of H 2 per mg chlorophyll per hour, which is an order of magnitude greater than those rates previously observed in other wild type H 2 producing model photosynthetic microorganisms under anaerobic conditions. As glycerol and CO 2 are both abundantly available as industrial waste products, the fact that they substantially enhance aerobic H 2 -production suggests that Cyanothece 51142 is a potentially viable system for producing biohydrogen as a renewable fuel source. During this project, we have conducted a detailed systems level analysis of this interesting cyanobacterial system, and have created a rich knowledgebase for the use of Cyanothece cells as efficient biohydrogen producers in large scale.

08 HYDROGEN↗

The Arecibo Pisces–Perseus Supercluster Survey. I. Harvesting ALFALFA

We report a multi-objective campaign of targeted 21 cm H i line observations of sources selected from the Arecibo Legacy Fast Arecibo L-band Feed Array (ALFALFA) survey and galaxies identified by their morphological and photometric properties in the Sloan Digital Sky Survey. The aims of this program have been (1) to confirm the reality of some ALFALFA sources whose enigmatic nature suggest additional multiwavelength observations; (2) to probe the low signal-to-noise ratio (S/N) regime, below the ALFALFA reliability limit; and (3) to explore the feasibility of using optical morphology, color, and surface brightness to identify gas-rich objects in the region of the Pisces–Perseus Supercluster (PPS) whose H i fluxes are below the ALFALFA sensitivity limit at that distance. As expected, the reliability of ALFALFA detections depends strongly on the S/N of the H i line signal and its coincidence with a probable stellar counterpart identified by its optical properties, suggestive of ongoing star formation. The identification of low-mass, star-forming populations enables targeted H i line observations to detect galaxies with H i line fluxes below the ALFALFA sensitivity limits in fixed local volumes (D < 100 Mpc). The method explored here serves as the basis for extending the sample of gas-bearing objects as part of the ongoing Arecibo Pisces–Perseus Supercluster Survey (APPSS).

79 ASTRONOMY AND ASTROPHYSICS↗

Square Kilometre Array Science Data Challenge 1: analysis and results

ABSTRACT As the largest radio telescope in the world, the Square Kilometre Array (SKA) will lead the next generation of radio astronomy. The feats of engineering required to construct the telescope array will be matched only by the techniques developed to exploit the rich scientific value of the data. To drive forward the development of efficient and accurate analysis methods, we are designing a series of data challenges that will provide the scientific community with high-quality data sets for testing and evaluating new techniques. In this paper, we present a description and results from the first such Science Data Challenge 1 (SDC1). Based on SKA MID continuum simulated observations and covering three frequencies (560, 1400, and 9200 MHz) at three depths (8, 100, and 1000 h), SDC1 asked participants to apply source detection, characterization, and classification methods to simulated data. The challenge opened in 2018 November, with nine teams submitting results by the deadline of 2019 April. In this work, we analyse the results for eight of those teams, showcasing the variety of approaches that can be successfully used to find, characterize, and classify sources in a deep, crowded field. The results also demonstrate the importance of building domain knowledge and expertise on this kind of analysis to obtain the best performance. As high-resolution observations begin revealing the true complexity of the sky, one of the outstanding challenges emerging from this analysis is the ability to deal with highly resolved and complex sources as effectively as the unresolved source population.

Bonaldi, A.↗

A CLUSTER OF COMPACT RADIO SOURCES IN W40

We present deep 3.6 cm radio continuum observations of the H II region W40 obtained using the Very Large Array (VLA) in its A and B configurations. We detect a total of 20 compact radio sources in a region of 4' x 4', with 11 of them concentrated in a band with 30'' of extent. We also present JHK photometry of the W40 cluster taken with the QUIRC instrument on the University of Hawaii 2.2 m telescope. These data reveal that 15 of the 20 VLA sources have infrared counterparts, and 10 show radio variability with periods less than 20 days. Based on these combined radio and IR data, we propose that eight of the radio sources are candidate ultracompact H II regions, seven are likely to be young stellar objects, and two may be shocked interstellar gas.

79 ASTRONOMY AND ASTROPHYSICS↗

Infrared objects in H II regions.

The discovery of 2-micron emission sources in NGC 2264, IC 2087, and M1-82, and of prominent infrared emission in Lk H-alpha 198 and V376 Cas is reported. Of the 25 objects found by scanning around the H II regions, less than half would appear to be late-type stars.

Allen, D. A.↗

DISCOVERY OF TeV GAMMA-RAY EMISSION FROM TYCHO'S SUPERNOVA REMNANT

We report the discovery of TeV gamma-ray emission from the Type Ia supernova remnant (SNR) G120.1+1.4, known as Tycho's SNR. Observations performed in the period 2008-2010 with the VERITAS ground-based gamma-ray observatory reveal weak emission coming from the direction of the remnant, compatible with a point source located at 00{sup h}25{sup m}27.{sup s}0, + 64{sup 0}10'50'' (J2000). The TeV photon spectrum measured by VERITAS can be described with a power law dN/dE = C(E/3.42 TeV){sup -}{Gamma} with {Gamma} = 1.95 {+-} 0.51{sub stat} {+-} 0.30{sub sys} and C = (1.55 {+-} 0.43{sub stat} {+-} 0.47{sub sys}) x 10{sup -14} cm{sup -2} s{sup -1} TeV{sup -1}. The integral flux above 1 TeV corresponds to {approx}0.9% of the steady Crab Nebula emission above the same energy, making it one of the weakest sources yet detected in TeV gamma rays. We present both leptonic and hadronic models that can describe the data. The lowest magnetic field allowed in these models is {approx}80 {mu}G, which may be interpreted as evidence for magnetic field amplification.

79 ASTRONOMY AND ASTROPHYSICS↗

Negative hydrogen ion beam extraction from an AC heated cathode driven Bernas-type ion source

A plasma grid structure was installed to a Bernas-type ion source used for ion implantation equipment. A negative hydrogen (H{sup −}) ion beam was extracted by an AC driven ion source by adjusting the bias to the plasma grid. The extracted electron current was reduced by positively biasing the plasma grid, while an optimum plasma grid bias voltage for negative ion beam extraction was found to be positive 3 V with respect to the arc chamber. Source operations with AC cathode heating show extraction characteristics almost identical to that with DC cathode heating, except a minute increase in H{sup −} current at higher frequency of cathode heating current.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Gravitational collapse.

Gravitational collapse as possible energy source for quasi-stellar sources, including discussion of radio sources and superdense stars

QUASI-STELLAR RADIO SOURCE /QSO/↗

VLA observations of solar active regions at 6 cm wavelength

Synthesized maps of two solar active regions obtained from observations with the Very Large Array (VLA) with 9-arcsec resolution are presented. The most intense sources in these regions are found to be associated with filamentary structures and magnetic neutral lines as shown in H-alpha and photospheric magnetograms. These sources are not located directly over sunspots in disagreement with earlier observations. EUV and X-ray observations have suggested that similar structures should be visible at cm wavelengths around but, outside of, sunspots if the magnetic field is sufficiently strong. These results are consistent with the locations of hot (greater than 1,000,000 K) plasmas in active regions expected from generalization based on optical photographs. Given the sizes of the radio sources, the volume emission measures of soft X-rays observed from OSO-8 rule out the possibility of thermal bremsstrahlung being of any significance, as far as the 6 cm emission is concerned. Therefore, gyroresonance absorption process is the most likely cause of 6 cm emission from these sources, and its likelihood is enhanced by the magnetic field geometry that is known to exist over filaments and neutral lines.

Kundu, M. R.↗

Functional Analysis of H + -Pumping Membrane-Bound Pyrophosphatase, ADP-Glucose Synthase, and Pyruvate Phosphate Dikinase as Pyrophosphate Sources in Clostridium thermocellum

Increased understanding of the central metabolism of C. thermocellum is important from a fundamental as well as from a sustainability and industrial perspective. In addition to showing that H + -pumping membrane-bound PPase, glycogen cycling, a Ppdk–malate shunt cycle, and acetate cycling are not significant sources of PP i supply, this study adds functional annotation of four genes and availability of an updated PP i stoichiometry from biosynthesis to the scientific domain.

Clostridium thermocellum↗

$H_0$ Without the Sound Horizon (or Supernovae): A 2% Measurement in DESI DR1

The sound horizon scale $r_s$ is a key source of information for early-time $H_0$ measurements, and is therefore a common target of new physics proposed to solve the Hubble tension. We present a sub-2% measurement of the Hubble constant that is independent of this scale, using data from the first data release of the Dark Energy Spectroscopic Instrument (DESI DR1). Building on previous work, we remove dependency on the sound horizon size using a heuristic rescaling procedure at the power spectrum level. A key innovation is the inclusion of \emph{uncalibrated} (agnostic to $r_s$) post-reconstruction BAO measurements from DESI DR1, as well as using the CMB acoustic scale $θ_*$ as a high-redshift anchor. Uncalibrated type-Ia supernovae are often included as an independent source of $Ω_m$ information; here we demonstrate the robustness of our results by additionally considering two supernova-independent alternative datasets. We find somewhat higher values of $H_0$ relative to our previous work: $69.2^{+1.3}_{-1.4}$, $70.3^{+1.4}_{-1.2}$, and $69.6^{+1.3}_{-1.8}\,{\rm km\,s^{-1}\,Mpc^{-1}}$ respectively when including measurements from i) Planck/ACT CMB lensing $\times$ unWISE galaxies, ii) the DES Year 3 6$\times$2pt analysis, and iii) Planck/ACT CMB lensing + the DES Year 5 supernova analysis. These remarkably consistent constraints achieve better than 2% precision; they are among the most stringent sound horizon-independent measurements from LSS to date, and provide a powerful avenue for probing the origin of the Hubble tension.

Cosmology and Nongalactic Astrophysics (astro-ph.C↗

Background gas density and beam losses in NIO1 beam source

NIO1 (Negative Ion Optimization 1) is a versatile ion source designed to study the physics of production and acceleration of H- beams up to 60 keV. In ion sources, the gas is steadily injected in the plasma source to sustain the discharge, while high vacuum is maintained by a dedicated pumping system located in the vessel. In this paper, the three dimensional gas flow in NIO1 is studied in the molecular flow regime by the Avocado code. The analysis of the gas density profile along the accelerator considers the influence of effective gas temperature in the source, of the gas temperature accommodation by collisions at walls, and of the gas particle mass. The calculated source and vessel pressures are compared with experimental measurements in NIO1 during steady gas injection.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Cassini Observations of Saturn's Dawn-Magnetotail Region: Preliminary Results

Using Cassini thermal plasma, hot plasma and magnetic field observations for several intervals between the dawn meridian of Saturn's outer magnetosphere and Saturn's magnetotail region, we investigate the structure of the magnetotail, plasma and magnetic field properties within tail-like current sheet regions and ion flows within the dawn to magnetotail regions. We use Cassini Plasma Spectrometer (CAPS) Ion Mass Spectrometer (IMS) and Electron Plasma Spectrometer (ELS) observations and MIMI LEMMS ion and electron observations to characterize the plasma environment. LMS observations are used to measure plasma flow velocities from which one can infer rotation versus convective flows. IMS composition measurements are used to trace the, source of plasma from the inner magnetosphere (protons, H(2+) and water group ions) versus an external solar wind source (protons and He++ ions). A critical parameter for both models is the strength of the convection electric field with respect to the rotational electric field for the large scale magnetosphere. For example, are there significant return flows (i.e., negative radial velocities, V(sub R) < 0) and/or plasmoids (V(sub R) > 0) within the magnetotail region?

Sittler, Edward C.↗

Investigating Abiotic and Biotic Mechanisms of Pyrite Reduction

Pyrite (FeS 2 ) has a very low solubility and therefore has historically been considered a sink for iron (Fe) and sulfur (S) and unavailable to biology in the absence of oxygen and oxidative weathering. Anaerobic methanogens were recently shown to reduce FeS 2 and assimilate Fe and S reduction products to meet nutrient demands. However, the mechanism of FeS 2 mineral reduction and the forms of Fe and S assimilated by methanogens remained unclear. Thermodynamic calculations described herein indicate that H 2 at aqueous concentrations as low as 10 –10 M favors the reduction of FeS 2 , with sulfide (HS – ) and pyrrhotite (Fe 1–x S) as products; abiotic laboratory experiments confirmed the reduction of FeS 2 with dissolved H 2 concentrations greater than 1.98 × 10 –4 M H 2 . Growth studies of Methanosarcina barkeri provided with FeS 2 as the sole source of Fe and S resulted in H 2 production but at concentrations too low to drive abiotic FeS 2 reduction, based on abiotic laboratory experimental data. A strain of M. barkeri with deletions in all [NiFe]-hydrogenases maintained the ability to reduce FeS 2 during growth, providing further evidence that extracellular electron transport (EET) to FeS 2 does not involve H 2 or [NiFe]-hydrogenases. Physical contact between cells and FeS 2 was required for mineral reduction but was not required to obtain Fe and S from dissolution products. The addition of a synthetic electron shuttle, anthraquinone-2,6-disulfonate, allowed for biological reduction of FeS 2 when physical contact between cells and FeS 2 was prohibited, indicating that exogenous electron shuttles can mediate FeS 2 reduction. Here, transcriptomics experiments revealed upregulation of several cytoplasmic oxidoreductases during growth of M. barkeri on FeS 2 , which may indicate involvement in provisioning low potential electrons for EET to FeS 2 . Collectively, the data presented herein indicate that reduction of insoluble FeS 2 by M. barkeri occurred via electron transfer from the cell surface to the mineral surface resulting in the generation of soluble HS – and mineral-associated Fe 1–x S. Solubilized Fe(II), but not HS – , from mineral-associated Fe 1–x S reacts with aqueous HS – yielding aqueous iron sulfur clusters (FeS aq ) that likely serve as the Fe and S source for methanogen growth and activity. FeS aq nucleation and subsequent precipitation on the surface of cells may result in accelerated EET to FeS 2 , resulting in positive feedback between cell activity and FeS 2 reduction.

59 BASIC BIOLOGICAL SCIENCES↗

Design Considerations for Developing 1.2 kV 4H-SiC BiDFET-enabled Power Conversion Systems

Bidirectional switches are essential for cycloconverter and matrix converter applications to facilitate single-stage AC-AC conversion without intermediate energy storage elements. The 1.2 kV 4H-SiC BiDFET was developed as the first monolithic bidirectional SiC power transistor. This paper describes the design considerations taken into account while creating the BiDFET device and developing custom packages for housing the switch in discrete form for low power applications and in module form for high-power applications. The realized switches are characterized for their on-state and switching performance. The versatility of the BiDFET device is demonstrated by operating a single BiDFET H-bridge in voltage-source-inverter and current-source-inverter topologies only by varying the gate bias on the individual BiDFETs and reversing the input-output connections.

Bidirectional, Silicon Carbide, Half-Bridge Module↗

Airborne flux measurements of ammonia over the southern Great Plains using chemical ionization mass spectrometry

Abstract. Ammonia (NH3) is an abundant trace gas in the atmosphere and an important player in atmospheric chemistry, aerosol formation and the atmosphere–surface exchange of nitrogen. The accurate determination of NH3 emission rates remains a challenge, partly due to the propensity of NH3 to interact with instrument surfaces, leading to high detection limits and slow response times. In this paper, we present a new method for quantifying ambient NH3, using chemical ionization mass spectrometry (CIMS) with deuterated benzene cations as reagents. The setup aimed at limiting sample–surface interactions and achieved a 1σ precision of 10–20 pptv and an immediate 1/e response rate of < 0.4 s, which compares favorably to the existing state of the art. The sensitivity exhibited an inverse humidity dependence, in particular in relatively dry conditions. Background of up to 10 % of the total signal required consideration as well, as it responded on the order of a few minutes. To showcase the method's capabilities, we quantified NH3 mixing ratios from measurements obtained during deployment on a Gulfstream I aircraft during the HI-SCALE (Holistic Interactions of Shallow Clouds, Aerosols, and Land-Ecosystems) field campaign in rural Oklahoma during May 2016. Typical mixing ratios were 1–10 parts per billion by volume (ppbv) for the boundary layer and 0.1–1 ppbv in the lower free troposphere. Sharp plumes of up to tens of ppbv of NH3 were encountered as well. We identified two of their sources as a large fertilizer plant and a cattle farm, and our mixing ratio measurements yielded upper bounds of 350 ± 50 and 0.6 kg NH3 h−1 for their respective momentary source rates. The fast response of the CIMS also allowed us to derive vertical NH3 fluxes within the turbulent boundary layer via eddy covariance, for which we chiefly used the continuous wavelet transform technique. As expected for a region dominated by agriculture, we observed predominantly upward fluxes, implying net NH3 emissions from the surface. The corresponding analysis focused on the most suitable flight, which contained two straight-and-level legs at ∼ 300 m above ground. We derived NH3 fluxes between 1 and 11 mol km−2 h−1 for these legs, at an effective spatial resolution of 1–2 km. The analysis demonstrated how flux measurements benefit from suitably arranged flight tracks with sufficiently long straight-and-level legs, and it explores the detrimental effect of measurement discontinuities. Following flux footprint estimations, comparison to the NH3 area emissions inventory provided by the U.S. Environmental Protection Agency indicated overall agreement but also the absence of some sources, for instance the identified cattle farm. Our study concludes that high-precision CIMS measurements are a powerful tool for in situ measurements of ambient NH3 mixing ratios, and even allow for the airborne mapping of the air–surface exchange of NH3.

58 GEOSCIENCES↗