Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Gas sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Mitigating Scatter in Mechanical Properties in AISI 410 Fabricated via Arc-Based Additive Manufacturing Process

Wire-based metal additive manufacturing utilizes the ability of additive manufacturing to fabricate complex geometries with high deposition rates (above 7 kg/h), thus finding applications in the fabrication of large-scale components, such as stamping dies. Traditionally, the workhorse materials for stamping dies have been martensitic steels. However, the complex thermal gyrations induced during additive manufacturing can cause the evolution of an inhomogeneous microstructure, which leads to a significant scatter in the mechanical properties, especially the toughness. Therefore, to understand these phenomena, arc-based additive AISI 410 samples were fabricated using robotic gas metal arc welding (GMAW) and were subjected to a detailed characterization campaign. The results show significant scatter in the tensile properties as well as Charpy V-notch impact toughness data, which was then correlated to the microstructural heterogeneity and delta (δ) ferrite formation. Post-processing (austenitizing and tempering) treatments were developed and an ~70% reduction in the scatter of tensile data and a four-times improvement in the toughness were obtained. The changes in mechanical properties were rationalized based on the microstructure evolution during additive manufacturing. Based on these, an outline to tailor the composition of “printable” steels for tooling with isotropic and uniform mechanical properties is presented and discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Leaf mass area, leaf carbon and nitrogen content, Seward Peninsula and Utqiagvik (Barrow), Alaska, 2022

Leaf mass per area (LMA), and leaf carbon and nitrogen content of Arctic vegetation species from three sites in Alaska, the Barrow Environmental Observatory (BEO), in Utqiagvik, and, two sites on the Seward Peninsula, Kougarok Mile 64 and Teller Mile 27. The plants were sampled in July 2022 as part of an ongoing project to improve the understanding of stomatal conductance in the Arctic. Species sampled from the BEO (from a 1 km2 area centered around 71.275°N, 156.641°W) were Arctagrostis latifolia, Arctophila fulva, Carex aquatilis, Eriophorum angustifolium, Petasites frigidus and Salix pulchra. Alnus viridis, Salix glauca and Salix pulchra were collected at the Seward Peninsula sites. All sampled leaves were used for gas exchange measurements prior to analysis of LMA and leaf carbon and nitrogen content. The data and metadata files included in this data package are in .csv format. See related datasets for stomatal response measurements.The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Vegetation Warming Experiment: Leaf mass area, leaf carbon and nitrogen content, Utqiagvik, Alaska, 2021-2022

Leaf mass per area (LMA), and leaf carbon and nitrogen content of an Arctic graminoid, Carex aquatilis, from within warming chambers and paired control plots. The plants were sampled in July 2021 and July 2022 as part of the Zero Power Warming (ZPW) vegetation warming experiment conducted on the Barrow Environmental Observatory (BEO), Utqiagvik (formerly Barrow), Alaska. Samples include leaves used for gas exchange measurements and bulk harvests from each warming chamber and paired ambient plot. The files included in this data package are in .csv format, and include 3 data files and 4 metadata files. See related datasets for plant physiology, phenology, thaw depth and environmental conditions of the plots and warming chambers. The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1972

Biological instrumentation for the Viking 1975 mission to Mars.

A brief introduction is given on why Mars is of interest from a biological point of view, along with an overview of the Viking 1975 mission. Details are given about the four biology instruments aboard the spacecraft and the experiments for which they are to be used. These are: the carbon assimilation experiment to determine whether the soil is biologically active; the label release experiment to detect metabolic activity by the release of radioactive CO2 from C-14 labelled simple organic substrates; the gas exchange experiment to detect biological activity by repeated gas chromatography analysis of soil samples; and the light scattering experiment, where increase of scattering and decrease of light transmission would indicate the growth of organisms. Examples are given of data obtained with terrestrial soils in these experiments.

Klein, H. P.↗
NASA NTRS1973

Soil moisture by extraction and gas chromatography

To determine moisture content of soils rapidly and conveniently extract moisture with methanol and determine water content of methanol extract by gas chromatography. Moisture content of sample is calculated from weight of water and methanol in aliquot and weight of methanol added to sample.

Merek, E. L.↗
NASA NTRS1977

A measurement system for the atmospheric trace gases CH4 and CO

A system for measuring ambient clean air levels of the atmospheric trace gases methane and carbon monoxide is described. The analytical method consists of a gas chromatographic technique that incorporates sample preconcentration with catalytic conversion of CO to CH4 and subsequent flame ionization detection of these gases. The system has sufficient sensitivity and repeatability to make the precise measurements required to establish concentration profiles for CO and CH4 in the planetary boundary layer. A discussion of the bottle sampling program being conducted to obtain the samples for the concentration profiles is also presented.

Condon, E. P.↗
NASA NTRS1976

Lead isotopic studies of lunar soils - Their bearing on the time scale of agglutinate formation

Fines (smaller than 75 microns) and bulk soil were studied to analyze loss of volatile lead; losses of the order of 10% to 30% radiogenic lead during the production of agglutinates are assessed. Lead isotope data from fine-agglutinate pairs are analyzed for information on the time scale of micrometeorite bombardment, from the chords generated by the data in concordia diagrams. Resulting mean lead loss ages were compared to spallogenic gas exposure ages for all samples. Labile parentless radiogenic Pb residing preferentially on or in the fines is viewed as possibly responsible for aberrant lead loss ages. Bulk soils plot above the concordia curve (in a field of excess radiogenic Pb) for all samples with anomalous ages.

Church, S. E.↗
NASA NTRS1984

Brominated organic species in the arctic atmosphere

Measurements are reported of four gas-phase, brominated organic species found in the Arctic atmosphere during March and April 1983. Volume mixing ratios for CH3Br, CH2BrCH2Br, CHBr3, and CH2Br2 were determined by gas chromatography/mass spectrometry analysis from samples taken Arctic wide, including at the geographic North Pole and during a tropopause folding event over Baffin Bay near Thule, Greenland. Methyl bromide mixing ratios were reasonably constant at 11 plus or minus 4 pptv, while the other three brominated organics showed a high degree of variability. Bromoform (2 to 46 pptv) was found to be the dominant contributor to gaseous organic bromine to the Arctic troposphere at 38 plus or minus 10 percent followed by CH2Br2 (3 to 60 pptv) at 29 plus or minus 6 percent. Both CH3Br and CH2BrCH2Br (1 to 37 pptv) reservoirs contained less than 20 percent of the organically bound bromine. Stratospheric samples, taken during a tropopause folding event, showed mixing ratios for all four species at levels high enough to support a stratospheric total volume mixing ratio of 249 pptv Br (888 ngBr/SCM).

Berg, W. W.↗
NASA NTRS1986

The dating of pre-exposure times of lunar rocks and soils

Xenon produced by fission of uranium, thorium and plutonium has repeatedly been observed in lunar rocks and soils. In two basaltic rocks and in two soils Xe was found originating from fission of U-235 induced by neutrons which are due to the interactions of cosmic ray particles with lunar matter. Two facts lead to this conclusion: (1) fission Xe is present in excess of that expected for the U, Th, and Pu concentrations and for the gas retention age of the samples; and (2) the Xe-134/Xe-136 ratio of excess fission Xe is close to 1.25 as expected for neutron induced fission of U-235. Information on the duration of the exposure to cosmic rays was obtained from the Kr-81-Kr systematics whereas the effective shielding conditions were derived from the depth sensitive cosmogenic ratio Xe-131/Xe-126. For the four samples the exposure to cosmic rays in the lunar regolith is described by a two stage exposure model. The history of the four samples was derived in terms of duration and shielding depth of the two stages.

Eugster, O.↗
NASA NTRS1986

Search for ultraviolet emission lines from a hot gaseous halo in the edge-on galaxy NGC 4244

Short and long wavelength IUE spectra of the halo region in the edge-on galaxy NGC 4244 are analyzed in order to identify evidence of line emission at the level of 0.000001 ergs per cu cm sr/s. Features are found at 1245 A and 1402 A, having peaks four times greater than the rms intensity fluctuations of nearby spectra. The spectral features are identified with semi-forbidden N V, semi-forbidden S IV at 1240 A, and Si IV and semi-forbidden O IV multiplets at 1400 A, respectively. The appearance of high-peak features and the lack of astrophysically important lines in the sample are evidence of a gas near T = 10 exp 5.2 and emission measure (EM) equal to about 0.000001 pc. However, the case for the existence of such a gas is weakened due to the existence of two other similarly sized features with no identifiable astrophysical origin and the extremely faint nature of the candidate features. The assumed upper limit for the line intensities in NGC 4244 leads to the conclusion that at T less than 100,000 K any emitting gas is either highly clumped or has a p/k value of less than 1000 per cu cm K. It is suggested that if the observed low level features in the short wavelength spectrum are real, the temperature and emission measures allow for a single component gas in the halo of NGC 4244, and are in agreement with those derived by Paresce et al. (1983).

Deharveng, J.-M.↗
NASA NTRS1987

Gas release and ordering of carbon in the Allende meteorite

An attempt is made to ascertain whether the inert gas atoms leave their carrier phases by volume diffusion, with intact internal phase frameworks, or are instead expelled from the solids as a results of substantial rearrangement, during release from samples of the Allende carbonaceous meteorite. Gas release over the 300-1100 C range was followed by Raman spectroscopic studies in the 1360 and 1580/cm wavelength bands of carbon. The results obtained indicate that the gas release at high temperatures is causally related to the ordering of carbon.

Heymann, D.↗
NASA NTRS1990

Reactions of SiC with H2/H2O/Ar mixtures at 1300 C

Thermochemical modeling anticipates the existence of three reaction regions for the case of a sintered alpha-SiC with 5 percent H2/H2O/Ar at 1300 C, depending on the initial water vapor or, equivalently, oxygen, content of the gas stream. While a high oxygen content leads to SiC-protecting SiO2 surface film formation and limits consumption of the SiC through passive oxidation, intermediate oxygen contents lead to SiO and CO formation and rapid SiC consumption. In this intermediate region, reaction rates appear to be controlled by H2O gas-phase transport to the sample; reacted microstructures exhibit extensive grain-boundary attack in this region. Very low oxygen content is predicted to selectively remove carbon, with free silicon formation.

Jacobson, Nathan S.↗
NASA NTRS1990

Characterization of the corrosion resistance of several alloys to dilute biologically active solutions

Sulfate reducing bacteria and acid producing bacteria/fungi detected in hygiene waters increased the corrosion rate in aluminum alloy. Biologically active media enhanced the formation of pits on metal coupons. Direct observation of gas evolved at the corrosion sample, coupled with scanning electron microscopy (SEM) and energy dispersive x-ray analysis of the corrosion products indicates that the corrosion rate is increased because the presence of bacteria favor the reduction of hydrogen as the cathodic reaction through the reaction of oxygen and water. SEM verifies the presence of microbes in a biofilm on the surface of corroding samples. The bacterial consortia are associated with anodic sites on the metal surface, aggressive pitting occurs adjacent to biofilms. Many pits are associated with triple points and inclusions in the aluminum alloy microstructure. Similar bacterial colonization was found on the stainless steel samples. Fourier transform Infrared Spectroscopy confirmed the presence of carbonyl groups in pitted areas of samples exposed to biologically active waters.

Walsh, Daniel W.↗
NASA NTRS1990

Experimental investigation of a single flush-mounted hypermixing nozzle

The results of an experimental wind tunnel investigation of a circular supersonic jet (m sub j = 3.47) injected at a 10 degree angle into a supersonic freestream. The jet penetrates a boundary layer, which has a thickness approximately the same as the jet nozzle exit diameter. Measurements were made for nominal freestream Mach numbers of 1.6, 2.0, 2.5, and 3.0. Three jet total pressures were run at each freestream Mach number, resulting in twelve separate operating conditions. Mean data accumulated by means of static and total pressure probe instrumentation are presented at two axial stations: seven jet nozzle diameters upstream and 15 jet nozzle diameters downstream from where the centerline of the nozzle intersects the wind tunnel wall. For one condition at each freestream Mach number, the jet air was seeded with a hydrocarbon trace gas and the flow was sampled at the downstream measurement plane to quantify the mean mixing of the two streams. Surface oil flow visualization was also used to investigate the flow interaction. All results are for air-to-air mixing. The measurements indicate the presence of two pairs contra-rotating vortices. One pair follows the jet trajectory and tends to split the jet into two streams. A smaller pair, rotating in an opposite sense, develops in the near wall region. Reported results include Mach number and volume fraction distributions in the cross plane, as well as jet penetration and mixing efficiency.

Davis, David O.↗
NASA NTRS1992

Catalysts for ultrahigh current density oxygen cathodes for space fuel cell applications

The objective was to identify promising electrocatalyst/support systems for oxygen cathodes capable of operating at ultrahigh current densities in alkaline fuel cells. Such cells will require operation at relatively high temperatures and O2 pressures. A number of materials were prepared, including Pb-Ru and Pb-Ir pyrochlores, RuO2 and Pt-doped RuO2, lithiated NiO and La-Ni perovskites. Several of these materials were prepared using techniques that had not been previously used to prepare them. Particularly interesting was the use of the alkaline solution technique to prepare Pt-doped and Pb-Ru pyrochlores in high area form. Also interesting was the use of the fusion (melt) method for preparing the Pb-Ru pyrochlore. Several of the materials were also deposited with platinum. Well-crystallized Pb2Ru2O(7-y) was used to fabricate very high performance O2 cathodes with good stability in room temperature KOH. This material was also found to be stable over a useful potential range at approx. 140 C in concentrated KOH. For some of the samples, fabrication of the gas-fed electrodes could not be fully optimized during this project period. Future work may be directed at this problem. Pyrochlores that were not well-crystallized were found to be unstable in alkaline solution. Very good O2 reduction performance and stability were observed with Pb2RuO(7-y) in a carbon-based gas-fed electrode with an anion-conducting membrane placed on the electrolyte side of the electrode. The performance came within a factor of about two of that observed without carbon. High area platinum and gold supported on several conductive metal oxide supports were examined. Only small improvements in O2 reduction performance at room temperature were observed for Pb2Ru2O(7-y) as a support because of the high intrinsic activity of the pyrochlore. In contrast, a large improvement was observed for Li-doped NiO as a support for Pt. Very poor performance was observed for Au deposited on Li-NiO at approx. 150 C. Nearly reversible behavior was observed for the O2/OH(-) couple for Li-doped NiO at approx. 200 C. The temperature dependence for the O2 reduction was examined.

Tryk, Donald A.↗
NASA NTRS1994

Vertical distribution of CH4 and N2O over the tropical site Hyderabad

Vertical distribution profiles of N2O and CH4 have been measured from Hyderabad, India using a balloon-borne cryogenic air sampler. The samples have been analyzed using gas chromatographic techniques. Results for two balloon flights made in 1987 and 1990 show effects of tropical characteristics like higher tropopause and upwelling motion due to Hadley circulation. These profiles also exhibit perturbations around 25 km height, which are likely to be due to dynamical effects. A comparison with the SAMS data show that the SAMS values for both these gases are higher by a factor of about 1.5 to 2 around 30 km height.

Lal, Shyam↗
NASA NTRS1995

A deep PSPC obervation of the Cyg OB2 association

The Cyg OB2 Association contains six of the fifteen most luminous stars in the Galaxy as well as the most luminous and most heavily reddened Galactic star, Cyg OB2 #12. In addition, the association contains a number of Wolf-Rayet stars, at least one early-type binary (Cyg OB2 #5), and a trapezium-like system (Cyg OB2 #8). Though not physically associated with the association, the X-ray source Cyg X-3 lies within a half degree of the center of the association. The association is a known source of X-rays. The X-ray emission from this region includes a contribution from Cyg X-3, as well as coronal emission from OB stars and hot diffuse gas. The region was extensively sampled by the HEAO-2 IPC (136 ks, which includes a single pointing of 57 ks on the central region of the association). A 3.6 ks PSPC observation of this region was obtained in the AO1 pointing phase. In addition, the four brightest OB stars (Cyg OB2 #5, #8A, #9, and #12) have been extensively monitored with the VLA. These stars show evidence of strong radio variability, and nonthermal radio emission characteristics. Several of these radio observations were taken within about a month of an IPC observation, and the two PSPC observations. We obtained a 19.5 ks exposure of the Cyg OB2 Association using the ROSAT PSPC instrument. Scientific tasks included: (1) extracting the PSPC spectral distributions of the brightest OB stars; (2) comparing the 19.5 ks spectral data with the 3.6 ks spectral data; (3) investigating the long term X-ray variability (15 years); and (4) comparing the X-ray and radio variability.

Waldron, Wayne↗