Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GLOBAL ASPECTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
NASA NTRS2020

Acoustic space occupancy: Combining ecoacoustics and lidar to model biodiversity variation and detection bias across heterogeneous landscapes

There is global interest in quantifying changing biodiversity in human-modified landscapes. Ecoacoustics may offer a promising pathway for supporting multi-taxa monitoring, but its scalability has been hampered by the sonic complexity of biodiverse ecosystems and the imperfect detectability of animal-generated sounds. The acoustic signature of a habitat, or soundscape, contains information about multiple taxa and may circumvent species identification, but robust statistical technology for characterizing community-level attributes is lacking. Here, we present the Acoustic Space Occupancy Model, a flexible hierarchical framework designed to account for detection artifacts from acoustic surveys in order to model biologically relevant variation in acoustic space use among community assemblages. We illustrate its utility in a biologically and structurally diverse Amazon frontier forest landscape, a valuable test case for modeling biodiversity variation and acoustic attenuation from vegetation density. We use complementary airborne lidar data to capture aspects of 3D forest structure hypothesized to influence community composition and acoustic signal detection. Our novel analytic framework permitted us to model both the assembly and detectability of soundscapes using lidar-derived estimates of forest structure. Our empirical predictions were consistent with physical models of frequency-dependent attenuation, and we estimated that the probability of observing animal activity in the frequency channel most vulnerable to acoustic attenuation varied by over 60%, depending on vegetation density. There were also large differences in the biotic use of acoustic space predicted for intact and degraded forest habitats, with notable differences in the soundscape channels predominantly occupied by insects. This study advances the utility of ecoacoustics by providing a robust modeling framework for addressing detection bias from remote audio surveys while preserving the rich dimensionality of soundscape data, which may be critical for inferring biological patterns pertinent to multiple taxonomic groups in the tropics. Our methodology paves the way for greater integration of remotely sensed observations with high-throughput biodiversity data to help bring routine, multi-taxa monitoring to scale in dynamic and diverse landscapes.

Airborne lidar↗
NASA NTRS1989

Structural zooming research and development of an interactive computer graphical interface for stress analysis of cracks

Engineering problems sometimes involve the numerical solution of boundary value problems over domains containing geometric feature with widely varying scales. Often, a detailed solution is required at one or more of these features. Small details in large structures may have profound effects upon global performance. Conversely, large-scale conditions may effect local performance. Many man-hours and CPU-hours are currently spent in modeling such problems. With the structural zooming technique, it is now possible to design an integrated program which allows the analyst to interactively focus upon a small region of interest, to modify the local geometry, and then to obtain highly accurate responses in that region which reflect both the properties of the overall structure and the local detail. A boundary integral equation analysis program, called BOAST, was recently developed for the stress analysis of cracks. This program can accurately analyze two-dimensional linear elastic fracture mechanics problems with far less computational effort than existing finite element codes. An interactive computer graphical interface to BOAST was written. The graphical interface would have several requirements: it would be menu-driven, with mouse input; all aspects of input would be entered graphically; the results of a BOAST analysis would be displayed pictorially but also the user would be able to probe interactively to get numerical values of displacement and stress at desired locations within the analysis domain; the entire procedure would be integrated into a single, easy to use package; and it would be written using calls to the graphic package called HOOPS. The program is nearing completion. All of the preprocessing features are working satisfactorily and were debugged. The postprocessing features are under development, and rudimentary postprocessing should be available by the end of the summer. The program was developed and run on a VAX workstation, and must be ported to the SUN workstation. This activity is currently underway.

Gerstle, Walter↗
NASA NTRS2001

Aspect-Oriented Programming

Computer science has experienced an evolution in programming languages and systems from the crude assembly and machine codes of the earliest computers through concepts such as formula translation, procedural programming, structured programming, functional programming, logic programming, and programming with abstract data types. Each of these steps in programming technology has advanced our ability to achieve clear separation of concerns at the source code level. Currently, the dominant programming paradigm is object-oriented programming - the idea that one builds a software system by decomposing a problem into objects and then writing the code of those objects. Such objects abstract together behavior and data into a single conceptual and physical entity. Object-orientation is reflected in the entire spectrum of current software development methodologies and tools - we have OO methodologies, analysis and design tools, and OO programming languages. Writing complex applications such as graphical user interfaces, operating systems, and distributed applications while maintaining comprehensible source code has been made possible with OOP. Success at developing simpler systems leads to aspirations for greater complexity. Object orientation is a clever idea, but has certain limitations. We are now seeing that many requirements do not decompose neatly into behavior centered on a single locus. Object technology has difficulty localizing concerns invoking global constraints and pandemic behaviors, appropriately segregating concerns, and applying domain-specific knowledge. Post-object programming (POP) mechanisms that look to increase the expressiveness of the OO paradigm are a fertile arena for current research. Examples of POP technologies include domain-specific languages, generative programming, generic programming, constraint languages, reflection and metaprogramming, feature-oriented development, views/viewpoints, and asynchronous message brokering. (Czarneclu and Eisenecker s book includes a good survey of many of these technologies).

Elrad, Tzilla↗
DOE OSTI2021

Radiative feedbacks on land surface change and associated tropical precipitation shifts

Changes in land surface albedo and land surface evaporation modulate the atmospheric energy budget by changing temperatures, water vapor, clouds, snow and ice cover, and the partitioning of surface energy fluxes. Here idealized perturbations to land surface properties are imposed in a global model to understand how such forcings drive shifts in zonal mean atmospheric energy transport and zonal mean tropical precipitation. For a uniform decrease in global land albedo, the albedo forcing and a positive water vapor feedback contribute roughly equally to increased energy absorption at the top of the atmosphere (TOA), while radiative changes due to the temperature and cloud cover response provide a negative feedback and energy loss at TOA. Decreasing land albedo causes a northwards shift in the zonal mean intertropical convergence zone (ITCZ). The combined effects on ITCZ location of all atmospheric feedbacks roughly cancel for the albedo forcing; the total ITCZ shift is comparable to that predicted for the albedo forcing alone. For an imposed increase in evaporative resistance that reduces land evaporation, low cloud cover decreases in the northern mid-latitudes and more energy is absorbed at TOA there; longwave loss due to warming provides a negative feedback on the TOA energy balance and ITCZ shift. Imposed changes in land albedo and evaporative resistance modulate fundamentally different aspects of the surface energy budget. However, the pattern of TOA radiation changes due to the water vapor and air temperature responses are highly correlated for these two forcings because both forcings lead to near-surface warming.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Global Simulations of Gravitational Instability in Protostellar Disks with Full Radiation Transport. I. Stochastic Fragmentation with Optical-depth-dependent Rate and Universal Fragment Mass

Fragmentation in a gravitationally unstable accretion disk can be an important pathway for forming stellar/planetary companions. To characterize quantitatively the condition for and outcome of fragmentation under realistic thermodynamics, we perform global 3D simulations of gravitationally unstable disks at various cooling rates and cooling types, including the first global simulations of gravitational instability that employ full radiation transport. We find that fragmentation is a stochastic process, with the fragment generation rate per disk area p frag showing an exponential dependence on the parameter β ≡ Ω K t cool , where Ω K is the Keplerian rotation frequency, and t cool is the average cooling timescale. Compared to a prescribed constant β, radiative cooling in the optically thin/thick regime makes p frag decrease slower/faster in β; the critical β corresponding to ∼1 fragment per orbit is ≈3, 5, and 2 for constant β, optically thin, and optically thick cooling, respectively. The distribution function of the initial fragment mass is remarkably insensitive to disk thermodynamics. Regardless of cooling rate and optical depth, the typical initial fragment mass is m frag ≈ 40M tot h 3 , with M tot being the total (star+disk) mass and h = H/R being the disk aspect ratio. Applying this result to typical Class 0/I protostellar disks, we find m frag ∼ 20M J , suggesting that fragmentation more likely forms brown dwarfs. Given the finite width of the m frag distribution, forming massive planets is also possible.

gravitational instability↗
NASA NTRS2014

Cloud Thermodynamic Phase Detection with Polarimetrically Sensitive Passive Sky Radiometers

The primary goal of this project has been to investigate if ground-based visible and near-infrared passive radiometers that have polarization sensitivity can determine the thermodynamic phase of overlying clouds, i.e. if they are comprised of liquid droplets or ice particles. While this knowledge is important by itself for our understanding of the global climate, it can also help improve cloud property retrieval algorithms that use total (unpolarized) radiance to determine Cloud Optical Depth (COD). This is a potentially unexploited capability of some instruments in the NASA Aerosol Robotic Network (AERONET), which, if practical, could expand the products of that global instrument network at minimal additional cost. We performed simulations that found, for zenith observations, cloud thermodynamic phase is often expressed in the sign of the Q component of the Stokes polarization vector. We chose our reference frame as the plane containing solar and observation vectors, so the sign of Q indicates the polarization direction, parallel (negative) or perpendicular (positive) to that plane. Since the quantity of polarization is inversely proportional to COD, optically thin clouds are most likely to create a signal greater than instrument noise. Besides COD and instrument accuracy, other important factors for the determination of cloud thermodynamic phase are the solar and observation geometry (scattering angles between 40 and 60 degrees are best), and the properties of ice particles (pristine particles may have halos or other features that make them difficult to distinguish from water droplets at specific scattering angles, while extreme ice crystal aspect ratios polarize more than compact particles). We tested the conclusions of our simulations using data from polarimetrically sensitive versions of the Cimel 318 sun photometerradiometer that comprise AERONET. Most algorithms that exploit Cimel polarized observations use the Degree of Linear Polarization (DoLP), not the individual Stokes vector elements (such as Q). For this reason, we had no information about the accuracy of Cimel observed Q and the potential for cloud phase determination. Indeed, comparisons to ceilometer observations with a single polarized spectral channel version of the Cimel at a site in the Netherlands showed little correlation. Comparisons to Lidar observations with a more recently developed, multi-wavelength polarized Cimel in Maryland, USA, show more promise. This divergence between simulations and observations has prompted us to begin the development of a small test instrument called the Sky Polarization Radiometric Instrument for Test and Evaluation (SPRITE). This instrument is specifically devoted to the accurate observation of Q, and the testing of calibration and uncertainty assessment techniques, with the ultimate goal of understanding the practical feasibility of these measurements.

Knobelspiesse, Kirk D.↗
DOE OSTI2026

Crowdsourcing the Frontier: Advancing Hybrid Physics‐ML Climate Simulation via a $\$$50,000 Kaggle Competition

Subgrid machine-learning (machine learning [ML]) parameterizations have the potential to introduce a new generation of climate models that incorporate the effects of higher-resolution physics without incurring the prohibitive computational cost associated with more explicit physics-based simulations. However, important issues, ranging from online instability to inconsistent online performance, have limited their operational use for long-term climate projections. To more rapidly drive progress in solving these issues, domain scientists and ML researchers opened up the offline aspect of this problem to the broader ML and data science community with the release of ClimSim, a NeurIPS Data sets and Benchmarks publication, and an associated Kaggle competition. This paper reports on the downstream results of the Kaggle competition by coupling emulators inspired by the winning teams' architectures to an interactive climate model (including full cloud microphysics, a regime historically prone to online instability) and systematically evaluating their online performance. Our results demonstrate that online stability in the low-resolution real-geography setting is reproducible across multiple diverse architectures, which we consider a key milestone. All tested architectures exhibit strikingly similar offline and online biases, though their responses to architecture-agnostic design choices (e.g., expanding the list of input variables) can differ significantly. Multiple Kaggle-inspired architectures achieve state-of-the-art results on certain metrics such as zonal mean bias patterns and global Root Mean Squared Error, indicating that crowdsourcing the essence of the offline problem is one path to improving online performance in hybrid physics-AI climate simulation.

Environmental sciences↗
NASA NTRS1985

Use of wind data in global modelling

The European Centre for Medium Range Weather Forecasts (ECMWF) is producing operational global analyses every 6 hours and operational global forecasts every day from the 12Z analysis. How the wind data are used in the ECMWF golbal analysis is described. For each current wind observing system, its ability to provide initial conditions for the forecast model is discussed as well as its weaknesses. An assessment of the impact of each individual system on the quality of the analysis and the forecast is given each time it is possible. Sometimes the deficiencies which are pointed out are related not only to the observing system itself but also to the optimum interpolation (OI) analysis scheme; then some improvements are generally possible through ad hoc modifications of the analysis scheme and especially tunings of the structure functions. Examples are given. The future observing network over the North Atlantic is examined. Several countries, coordinated by WMO, are working to set up an 'Operational WWW System Evaluation' (OWSE), in order to evaluate the operational aspects of the deployment of new systems (ASDAR, ASAP). Most of the new systems are expected to be deployed before January 1987, and in order to make the best use of the available resources during the deployment phase, some network studies are carried out at the present time, by using simulated data for ASDAR and ASAP systems. They are summarized.

Pailleux, J.↗
NASA NTRS1999

Selecting Meteorological Input for the Global Modeling Initiative Assessments

The Global Modeling Initiative (GMI) science team has developed a three dimensional chemistry and transport model (CTM) to evaluate the impact of the exhaust of supersonic aircraft on the stratosphere. An important goal of the GMI is to test modules for numerical transport, photochemical integration, and model dynamics within a common framework. This work is focussed on the dependence of the overall assessment on the wind and temperature fields used by the CTM. Three meteorological data sets for the stratosphere were available to GMI: the National Center for Atmospheric Research Community Climate Model (CCM2), the Goddard Earth Observing System Data Assimilation System (GEOS-DAS), and the Goddard Institute for Space Studies general circulation model (GISS-2'). Objective criteria were established by the GMI team to evaluate which of these three data sets provided the best representation of trace gases in the stratosphere today. Tracer experiments were devised to test various aspects of model transport. Stratospheric measurements of long-lived trace gases were selected as a test of the CTM transport. This presentation describes the criteria used in grading the meteorological fields and the resulting choice of wind fields to be used in the GMI assessment. This type of objective model evaluation will lead to a higher level of confidence in these assessments. We suggest that the diagnostic tests shown here be used to augment traditional general circulation model evaluation methods.

Strahan, Susan↗
NASA NTRS2015

The AgMIP Coordinated Global and Regional Assessments (CGRA) of Climate Change Impacts on Agriculture and Food Security

The Agricultural Model Intercomparison and Improvement Project (AgMIP) has been working since 2010 to construct a protocol-based framework enabling regional assessments (led by regional experts and modelers) that can provide consistent inputs to global economic and integrated assessment models. These global models can then relay important global-level information that drive regional decision-making and outcomes throughout an interconnected agricultural system. AgMIPs community of nearly 800 climate, crop, livestock, economics, and IT experts has improved the state-of-the-art through model intercomparisons, validation exercises, regional integrated assessments, and the launch of AgMIP programs on all six arable continents. AgMIP is now launching Coordinated Global and Regional Assessments (CGRA) of climate change impacts on agriculture and food security to link global and regional crop and economic models using a protocol-based framework. The CGRA protocols are being developed to utilize historical observations, climate projections, and RCPsSSPs from CMIP5 (and potentially CMIP6), and will examine stakeholder-driven agricultural development and adaptation scenarios to provide cutting-edge assessments of climate changes impact on agriculture and food security. These protocols will build on the foundation of established protocols from AgMIPs 30+ activities, and will emphasize the use of multiple models, scenarios, and scales to enable an accurate assessment of related uncertainties. The CGRA is also designed to provide the outputs necessary to feed into integrated assessment models (IAMs), nutrition and food security assessments, nitrogen and carbon cycle models, and additional impact-sector assessments (e.g., water resources, land-use, biomes, urban areas). This presentation will describe the current status of CGRA planning and initial prototype experiments to demonstrate key aspects of the protocols before wider implementation ahead of the IPCC Sixth Assessment Report.

models↗
NASA NTRS1990

Diurnal ocean surface layer model validation

The diurnal ocean surface layer (DOSL) model at the Fleet Numerical Oceanography Center forecasts the 24-hour change in a global sea surface temperatures (SST). Validating the DOSL model is a difficult task due to the huge areas involved and the lack of in situ measurements. Therefore, this report details the use of satellite infrared multichannel SST imagery to provide day and night SSTs that can be directly compared to DOSL products. This water-vapor-corrected imagery has the advantages of high thermal sensitivity (0.12 C), large synoptic coverage (nearly 3000 km across), and high spatial resolution that enables diurnal heating events to be readily located and mapped. Several case studies in the subtropical North Atlantic readily show that DOSL results during extreme heating periods agree very well with satellite-imagery-derived values in terms of the pattern of diurnal warming. The low wind and cloud-free conditions necessary for these events to occur lend themselves well to observation via infrared imagery. Thus, the normally cloud-limited aspects of satellite imagery do not come into play for these particular environmental conditions. The fact that the DOSL model does well in extreme events is beneficial from the standpoint that these cases can be associated with the destruction of the surface acoustic duct. This so-called afternoon effect happens as the afternoon warming of the mixed layer disrupts the sound channel and the propagation of acoustic energy.

Hawkins, Jeffrey D.↗
DOE OSTI2021

Investigation of the effects of turbulence modeling on the prediction of compression-ignition combustion unsteadiness

Adverse effects of global warming due to the greenhouse gas emissions is changing the actual paradigm for the use energy resources. In the absence of a mid-term solution for reducing these emissions in transportation, internal combustion (IC) engines are going to coexist in the social spheres in the foreseeable future. Therefore, the study of other IC engine-related problems remains relevant to ensuring the health of the society. In this investigation, a numerical methodology for comprehensive understanding of Noise, Vibration and Harshness in internal combustion engines is proposed. Due to its inherent complexity and lack of awareness, the main objective is to evaluate the impact of the turbulence modeling framework on the in-cylinder acoustic field recreation. Modal decomposition methods have been applied to isolate the coherent flow structures and to analyze how they change with the turbulence approach. Results demonstrate that the choice of the turbulence model is a critical aspect for noise modeling. Unsteady Reynolds-Averaged Navier-Stokes schemes predict a raw estimation of the internal acoustic field with the added value of being computationally less expensive. However, the use of more complex turbulence approaches such us large eddy simulation offers an accurate prediction of the acoustic structures and their cyclic dispersion.

Broatch, A.↗
DOE OSTI2025

Structural and Mechanistic Advances in the Chemistry of Methyl-Coenzyme M Reductase (MCR)

Methane represents 34% of U.S. energy consumption and is a major greenhouse gas related to the global carbon cycle and energy production. However, current industrial practices significantly increase atmospheric methane levels, necessitating a deeper understanding of its biosynthesis and oxidation. Methyl-coenzyme M reductase (MCR) is central to biological methane metabolism, catalyzing the final step of methanogenesis and the first step in anaerobic methane oxidation. It is also a key target for strategies to capture and transform methane into value-added chemicals.The active site of MCR is a buried Ni-based cofactor only accessible by the substrates via a 50 Å long tunnel. Although the Ni(I) state is required to initiate catalysis, capturing this state remains a challenge for the current structural techniques. Recent advances in structural biology using X-ray Free-Electron Laser serial crystallography have provided insights into MCR's inactive Ni(II) state at room temperature and show promise for capturing its active Ni(I) form.Our team has established several critical aspects of the MCR mechanism using a combination of experimental and computational studies. MCR uses CH 3 -SCoM and CoBSH as substrates, producing methane and a disulfide product CoMSSCoB. Kinetic analysis showed that productive substrate binding requires CH 3 -SCoM to bind first, inducing conformational changes that optimize the active site for subsequent CoBSH binding. Following substrate binding, four proposed methane production/oxidation mechanisms were examined, establishing whether the reaction proceeds through an organometallic methyl-nickel(III), methyl anion ion, or methyl radical intermediate. Experimental measurements using CoBSH analogs successfully slowed the reaction, allowing for mechanistic insight that demonstrated the methyl radical pathway, where the initial interactions involve homolytic cleavage of the methyl-sulfur bond, generating a methyl radical that quickly abstracts the thiol hydrogen atom of CoBSH to form methane. Computational studies further confirmed that, compared to other mechanisms, the methyl radical mechanism is thermodynamically more favorable and accessible under physiological conditions.Spectroscopic and computational studies challenged the conventional understanding of substrate binding in MCR by proposing an alternative positioning of CH 3 -SCoM and CoMSSCoB in the active site pocket. The research suggested that CH 3 -SCoM (substrate) and CoMSSCoB (product) bind via their sulfonate groups to the Ni(I) center of cofactor F 430 . This binding allows for the reaction without substrate reorganization in the pocket but would require a long-range electron transfer. Altogether, the work summarized in this review reflects our current understanding of the enzyme's catalytic mechanism and structural dynamics. This is essential for developing efficient methane conversion technologies that could mitigate its environmental impact while harnessing energy-storage properties.

03 NATURAL GAS↗
NASA NTRS2021

What it Takes to Compute Highly Accurate Rovibrational Line Lists for Use in Astrochemistry

We review the Best Theory + Reliable High-resolution Experiment (BTRHE) strategy for obtaining highly accurate molecular rovibrational line lists with InfraRed (IR) intensities. The need for highly accurate molecular rovibrational line lists is two-fold: a) assignment of the many rovibrational lines for common stable molecules especially those that exhibit a large amplitude motion, such as NH3, or have a high density of states such as SO2; and b) characterization of the atmospheres of exoplanets which will be one of the main areas of research in astronomy in the coming decades. The first motivation arises due to the need to eliminate lines due to common molecules in an astronomical observation in order to identify lines from new molecules, while the second motivation arises due to the need to obtain accurate molecular opacities in order to characterize the atmosphere of an exoplanet. The BTRHE strategy first consists of using high quality ab initio quantum chemical methods to obtain a global potential energy surface (PES) and dipole moment surface (DMS) that contains the proper physics. The global PES is then refined using a subset of the reliable high-resolution experimental data. The refined PES then gives energy level predictions to an accuracy similar to the reproduction accuracy of the experimental data used in the refinement step in the interpolation region (i.e., within the range of the experimental data used in the refinement step). The accuracy of the energy levels will slowly degrade as they are extrapolated to spectral regions beyond the high-resolution experimental data used in the refinement step. However, because the degradation is slow, the predicted energy levels can be used to assign new high-resolution experiments, and the data from these can then be used in a subsequent refinement step. In this way, the global PES eventually can yield highly accurate energy levels for all desired spectral regions including to very high energies and high J values. We show that IR intensities computed with the BTRHE rovibrational wavefunctions and the DMS can be very accurate provided one has minimized the fitting error of the DMS and tested the completeness of the DMS. Some examples of our work on NH3, CO2, and SO2 are given to highlight the usefulness of the BTRHE strategy and to provide ideas on how to further improve its predictive power in the future. In particular, it is shown how successive refinement steps, once new high-resolution data is available, can lead to PESs that yield highly accurate transition energies to larger spectral regions. The importance of including non-adiabatic corrections to reduce the J-dependence of errors for H-containing molecules is shown with work on NH3. Another very important aspect of the BTRHE approach is the consistency across isotopologues, which allows for highly accurate line lists for any isotopologue once one is obtained for the main isotopologue (which has more high-resolution data available for refinement).

Xinchuan Huang↗
NASA NTRS1998

Incompressible Turbulent Wing-Body Junction Flow

The overall objective of this study is to contribute to the optimized design of fan bypass systems in advanced turbofan engines. Increasing the engine bypass ratios have provided a major boost in engine performance improvement over the last fifty years. An engine with high bypass ratio (11-16:1) such as the Advanced Ducted Propulsion (ADP) is being developed and is expected to provide an additional 25% improvement in overall efficiency over the early turbofans. Such significant improvements in overall efficiency would reduce the cost per seat mile, which is a major government and Industry challenge for the 21th century. The research is part of the Advanced Subsonic Technology (AST) program that involves a NASA, U.S. Industry and FAA partnership with the goal of a safe and highly productive global air transportation system. The immediate objective of the study is to perform numerical simulation of duct-strut interactions to elucidate the loss mechanisms associated with this configuration that is typical of advanced turbofan engines such as ADP. However, at present experimental data for a duct-strut configuration are not available. Thus, as a first step a wing-body junction flow would be studied and is the specific objective of the present study. At the outset it is to be recognized that while duct-strut interaction flow is similar to that of wing-body junction flows, there are some differences owing to the presence of a wall at both ends of the strut. Likewise, some differences are due to the sheared inflow (as opposed to a uniform inflow) velocity profile. It is however expected that some features of a wing-body junction flow would persist. Next, some of the salient aspects of the complex flow near a wing-body junction, as revealed by various studies reported in the literature will be reviewed. One of the principle characteristics of the juncture flow, is the presence of the mean flow components in a plane perpendicular to the direction of the oncoming free-stream flow. The lateral curvature of the wing/strat causes the oncoming turbulent layer to skew about am axis (x-axis) parallel to the plane (xz-plane) of the mean shear. This is the principle mechanism for the generation of secondary flow. Such skew-induced secondary flows are slow to be attenuated by Reynolds stresses. Additional contribution to the generation of secondary flow comes from anisotropies in Reynolds stresses. Upstream of the strut, the mean-vorticity is directed span wise (along the y-direction). The presence of secondary flow in the vicinity of the strut causes the vorticity to stretch around the obstacle in a horse-shoe shape, with each leg having a vorticity of the opposite sense. The blockage effect of the strut imposes a severe adverse pressure gradient on the oncoming turbulent shear layer, causing boundary layer separation ahead of the leading edge, resulting in a vortex that rolls up and flows downstream into the juncture region. The separation vortices trailing in the wake of the wing can alter the lift or drag characteristics of the surfaces downstream of the wing-body juncture. Likewise, on submarines, the wake flow behind the appendage can degrade the performance of the propeller located downstream. The complex nature of this flow is caused by the presence of all six components of Reynolds stresses. Devenport and Simpson report that in the vicinity of the horse-shoe vortex there is intense recirculation with turbulent stresses being much larger than those normally observed in turbulent flows. These features contribute to making this flow a challenge to predict numerically. Some of the past studies provide useful insights into this flow that would guide our numerical efforts. In measurements reported by Shabaka and Bradshaw, the eddy viscosity tensor is seen to be non-isotropic and has negative components in certain regions. In an effort to evaluate the closure assumptions of various turbulence models, Devenport and Simpson used their own extensive measurements in juncture flows around the nose of a wing-body junction. Measured values of mean-velocity and/or turbulence kinetic energy was used to predict the magnitude of the shear stress vector. Algebraic stress models performed the best followed by Cebeci-Smith eddy viscosity model. The flow is reported to be dominated by a pressure field produced by the wing and the velocity field generated by the horseshoe vortex that is wrapped around the junction between the wing and wall. Kubendran et al. conclude from an experimental study that the shape of leading edge of the wing as characterized by its slenderness ratio is a major factor in determining the flow fields in the juncture region. The more thinner the leading edge of the juncture, the weaker the horseshoe vortex is. Also, with a slender leading edge, the secondary flow in the juncture would be due mainly to the cross-stream gradients of Reynolds stresses rather than due to a lateral skewing of the shear layer.

Krishnamurthy, R.↗
NASA NTRS2019

Lunar Navigation Beacon Network Using Global Navigation Satellite System Receivers

With the increasing traffic in the lunar regime as part of NASA efforts to return humans to the moon. In order to support these missions, new capabilities are needed to support autonomous navigation and inter-asset communication. Additionally, with maturation and flight demonstration of increasingly capable small satellites, there is an opportunity to embed technology into a small spacecraft as part of companion missions. This paper addresses one such architecture, taking advantage of a lunar lander vehicle to host a companion spacecraft to build out lunar navigation and communication capability. The backbone of this spacecraft is the Navigator GPS receiver. This hardware has continually broken records on high altitude GPS coverage and has the potential to support autonomous navigation at lunar distances. This research proposes a large cubesat built around this technology and catching a ride to the moon via a lander mission. The concept of operations includes the spacecraft deploying prior to the lunar sphere of influence and maneuvering to enter into a lunar orbit. With the Navigator receiver, this spacecraft is capable of a large amount of autonomy, with a limited need for ground-based orbit determination. This spacecraft will fly alongside the lander, acting as a navigation reference during cruise, descent, and post-landing for mission validation. To assess this mission scenario, three aspects are covered in detail herein: the feasibility and mission requirements for entering into a lunar orbit given deployment along a lander surface-bound trajectory, the performance capability of the receiver along this transfer trajectory and in lunar orbit, and the ability to support navigation of the lander itself. These three areas are discussed in detail, providing results that support feasibility of the mission and determination of initial requirements.

Anzalone, Evan J.↗
DOE OSTI2025

High-heat transfer lithium-ion batteries: A new era in battery thermal management

Despite advances in lithium-ion battery technology, critical challenges remain that must be addressed to accelerate electric vehicle (EV) adoption and global energy transformation. Significantly improved battery thermal management (BTM) is key to overcoming these challenges. BTM approaches focus on increasing heat transfer coefficients via air, liquid, or refrigerant cooling, but less attention is given to reducing the battery's thermal resistance, a major bottleneck for heat transfer. This work introduces a novel approach to reduce battery thermal resistance by integrating in-plane heat transfer with optimized cell geometry, minimized thermal resistances, and reduced interfacial resistances, representing a departure from previous methods. The standard prismatic can cell incorporating this technology is referred to as the high heat transfer (HHT) battery. An equivalent resistance battery thermal model is developed for speed and accuracy, validated against experimental data in the literature, demonstrating strong correlation and ensuring reliable predictions for real-world performance. Thermal performance metrics of the conventional and HHT batteries are compared using a parametric study with air, liquid, and refrigerant boundary conditions across a range of aspect ratios. The HHT battery shows a heat removal rate up to 20 times higher than a conventional battery. These findings suggest that HHT technology could be transformative for EV battery performance, enabling fast charging, mitigating thermal runaway, extending battery life, reducing cold-weather power loss, increasing reliability, lowering costs, and enabling higher energy density, all critical for EV adoption and energy transformation. Future work will focus on prototyping and real-world testing to refine these findings for commercial-scale applications.

25 ENERGY STORAGE↗
DOE OSTI2024

Three different directions in which the European Union could replace Russian natural gas

Russia's invasion of Ukraine fuelled an energy crisis, which considerably impacted Europe given its heavy reliance on Russian natural gas imports. This study uses an ensemble of four global integrated assessment models, which are further soft-linked to two sectoral models, and explores the synergies and trade-offs among three approaches to living without Russian gas in Europe: (a) replacing with other gas imports, (b) boosting domestic energy production, and (c) reducing demand and accelerating energy efficiency. We find that substituting Russian gas from other trade partners would miss an opportunity to accelerate decarbonisation in end-use sectors while risking further fossil-fuel lock-ins, despite featuring the lowest gas price spikes and potentially reducing heating costs for end-users in the near term. Boosting domestic, primarily renewable, energy production on the other hand would instead require considerable investments, potentially burdening consumers. Energy demand reductions, however, could offer considerable space for further emissions cuts at the lowest power-sector investment costs; nonetheless, an energy efficiency-driven strategy would also risk relocation of energy-intensive industries, an aspect of increasing relevance to EU policymakers.

03 NATURAL GAS↗