Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fuel Cell”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

PEM regenerative fuel cells

This paper will update the progress in developing electrocatalyst systems and electrode structures primarily for the positive electrode of single-unit solid polymer proton exchange membrane (PEM) regenerative fuel cells. The work was done with DuPont Nafion 117 in complete fuel cells (40 sq cm electrodes). The cells were operated alternately in fuel cell mode and electrolysis mode at 80 C. In fuel cell mode, humidified hydrogen and oxygen were supplied at 207 kPa (30 psi); in electrolysis mode, water was pumped over the positive electrode and the gases were evolved at ambient pressure. Cycling data will be presented for Pt-Ir catalysts and limited bifunctional data will be presented for Pt, Ir, Ru, Rh, and Na(x)Pt3O4 catalysts as well as for electrode structure variations.

Swette, Larry L.↗

Natural fiber-derived gas diffusion layers for high performance, lower cost PEM fuel cells

The gas diffusion layer (GDL) is a critical component of proton exchange membrane fuel cells. GDL manufacture is dominated by the use of polyacrylonitrile (PAN) fibers, resulting in high production costs. Those costs contribute to the high cost of fuel cell stacks. Thus, reducing GDL manufacturing costs without sacrificing performance, should help reduce the overall cost of the fuel cell stack. Using inexpensive, natural fiber-based papers and fabric as substrates, here we examine the inherent performance these materials as GDLs, and the improvements enabled by the addition of a microporous layer, gas-phase hydrophobic treatment, and densification. The resulting GDLs achieve equivalent performance the commercial baseline GDL and demonstrate the potential of lower cost GDLs.

25 ENERGY STORAGE↗

A Goldilocks Approach to Water Management: Hydrochannel Porous Transport Layers for Unitized Reversible Fuel Cells

Abstract This work presents a novel porous transport layer (PTL), the hydrochannel PTL, that enables improved water management and record high round trip efficiency in unitized reversible fuel cells (URFCs). URFCs require rapid transport of O 2 and H 2 O to provide high performance in both fuel cell and water electrolyzer operation, but cell design is complicated by conflicting water management requirements: electrolyzers perform best with high liquid water saturation, whereas fuel cells perform best when liquid water saturation is as low as possible while still maintaining effective ionomer hydration. The hydrochannel PTL circumvents this obstacle by providing hydrophilic channels for water transport through an otherwise hydrophobic PTL, enabling optimal performance in both fuel cell and water electrolyzer modes. Neutron radiography measurements of water content in both operating modes confirm that the hydrochannel PTL enables high performance due to its improved water management capabilities.

25 ENERGY STORAGE↗

Domestically Manufactured Fuel Cells for Heavy Duty Applications

This project, funded by the U.S. Department of Energy under Award DE-EE0009248, advances the domestic development of fuel-cell stack technologies for heavy-duty transportation applications. The work directly supports the Million-Mile Fuel Cell Truck (M2FCT) initiative by improving performance, durability, and manufacturability—key requirements for next-generation hydrogen fuel-cell systems.

08 HYDROGEN↗

Engineered Nano-Scale Ceramic Supports for PEM Fuel Cells

Development of electronically conductive ceramic materials is of fundamental importance to a wide variety of applications. One application of particular interest is proton exchange membrane fuel cells (PEMFC), where strong oxidizing conditions exist, especially in the cathode. The reaction that takes place in the cathodic side of PEMFCs is the oxygen reduction reaction (ORR) which is considered to be kinetically sluggish and thus, it is catalyzed, usually by platinum nano-particles. Due to the high cost of such catalysts, and in order to maintain their optimized nano-crystallite structure, they are normally supported on a relatively cheap, electronically conductive, porous, high surface area support. Most of the electrode support materials used in fuel cells today are carbon based which are highly sensitive to corrosive conditions and thus corrode under normal fuel cell operating conditions. This leads to processes that can be detrimental to the fuel cell and is manifested in the form of loss of surface area, impediment of mass transport and loss of catalyst activity due to sintering or dissolution. The direct consequence of these effects is the loss of the overall fuel cell power output overtime and shortening their lifetime; both make this technology less attractive to industry. In order to make PEMFCs more viable, it is necessary to extend their lifetime and reliability by improving the catalyst support.

08 HYDROGEN↗

Fuel Cell Technology Status Analysis Project: Partnership Opportunities (Fact Sheet)

This fact sheet describes opportunities for leading fuel cell industry partners from the United States and abroad to participate in an objective and credible fuel cell technology performance and durability analysis by sharing their raw fuel cell test data related to operations, maintenance, safety, and cost with the National Renewable Energy Laboratory via the Hydrogen Secure Data Center.

08 HYDROGEN↗

Understanding the E balance for water management in hydroxide exchange membrane fuel cells

As a key challenge for hydroxide exchange membrane fuel cells (HEMFCs), understanding water management deeply is critical for performance and durability improvement. Here, in this work, we show that the balance between water generation and phase-change-induced (PCI) flow is the main factor controlling cell voltage over a wide range of conditions where the cells are vulnerable to severe flooding. The regulation of flooding by heat generation can be reflected by a stable voltage with increase of current density in the polarization curve. This PCI balance voltage (E balance ), which determines the shape of polarization curve, is modeled as a function of cell operating conditions and gas diffusion layer (GDL) properties. Temperature, pressure, and thermal conductivity of GDL were found important for tuning the level of E balance , both in HEMFCs and proton exchange membrane fuel cells. The understanding of E balance will help to generate strategies for resolving flooding in HEMFCs, and it offers a new perspective for polarization curve interpretation.

25 ENERGY STORAGE↗

Toward developing a computational capability for PEM fuel cell design and optimization.

In this paper, we report the progress made in our project recently funded by the US Department of Energy (DOE) toward developing a computational capability, which includes a two-phase, three-dimensional PEM (polymer electrolyte membrane) fuel cell model and its coupling with DAKOTA (a design and optimization toolkit developed and being enhanced by Sandia National Laboratories). We first present a brief literature survey in which the prominent/notable PEM fuel cell models developed by various researchers or groups are reviewed. Next, we describe the two-phase, three-dimensional PEM fuel cell model being developed, tested, and later validated by experimental data. Results from case studies are presented to illustrate the utility of our comprehensive, integrated cell model. The coupling between the PEM fuel cell model and DAKOTA is briefly discussed. Our efforts in this DOE-funded project are focused on developing a validated computational capability that can be employed for PEM fuel cell design and optimization.

30 DIRECT ENERGY CONVERSION↗

Fuel Cell Technologies Office FY 2017 Budget At-A-Glance

The Fuel Cell Technologies Office develops technologies to enable fuel cells to be competitive in diverse applications, with a focus on light-duty vehicles (at less than $40/kW) and to enable renewable hydrogen to be cost-competitive with gasoline (at less than $4 per gallon gasoline equivalent (gge), delivered and dispensed).

Fuel Cell, Budget, Finance, FY2017↗

Systems and methods for monitoring fuel cell membrane degradation

Systems and methods for real-time continuous monitoring of fuel cell membrane degradation are provided. At least one microsensor can be used as an inline sensor integrated at the cathode exhaust and/or the anode exhaust of a fuel cell, such as a proton exchange membrane fuel cell (PEMFC)). The microsensor can monitor the PEMFC degradation status by sensing the emission of fluoride.

Dong, Dongmei↗

Systems and methods for monitoring fuel cell membrane degradation

Systems and methods for real-time continuous monitoring of fuel cell membrane degradation are provided. At least one microsensor can be used as an inline sensor integrated at the cathode exhaust and/or the anode exhaust of a fuel cell, such as a proton exchange membrane fuel cell (PEMFC)). The microsensor can monitor the PEMFC degradation status by sensing the emission of fluoride.

Dong, Dongmei↗

Hydride-Based Solid Oxide Fuel Cell–Battery Hybrid Electrochemical System

The deployment of renewable energy technologies, such as solar photovoltaics and wind turbines, poses challenges in terms of electricity grid stability due to the intermittent nature of such energy sources, which creates a need for innovative storage solutions. We demonstrate a metal hydride-based hybrid electrochemical system that enables a solid-oxide fuel cell to operate in both fuel cell mode and battery mode, allowing for un-interrupted electricity generation. In the fuel cell mode, the device acts as a conventional fuel cell and converts the chemical energy stored in fuels into electrical energy. In the battery mode, the metal hydride near the anode releases hydrogen and quickly responds to fuel supply interruption or power demand surges. The concept demonstrated here is a promising way to provide a robust and economical solution for balancing power supply and demand for the electrical grid of the future.

25 ENERGY STORAGE↗

Non-Flow-Through Fuel Cell System Test Results and Demonstration on the SCARAB Rover

This paper describes the results of the demonstration of a non-flow-through PEM fuel cell as part of a power system on the SCARAB rover. A 16-cell non-flow-through fuel cell stack from Infinity Fuel Cell and Hydrogen, Inc. was incorporated into a power system designed to act as a range extender by providing power to the rover s hotel loads. This work represents the first attempt at a ground demonstration of this new technology aboard a mobile test platform. Development and demonstration were supported by the Office of the Chief Technologist s Space Power Systems Project and the Advanced Exploration System Modular Power Systems Project.

Scheidegger, Brianne, T.↗

Thermodynamic and experimental assessment of proton conducting solid oxide fuel cells with internal methane steam reforming

Operating proton conducting solid oxide fuel cells (H-SOFCs) with hydrocarbon as fuel remains a challenge because of the instability of the anode and electrolyte materials in a CO 2 /H 2 O-containing atmosphere and the catalytic activity and coking resistance of the anode for direct oxidation of hydrocarbons. Therefore, in this paper, the steam reforming of methane (SRM, an endothermic process) is integrated into the H-SOFCs (fuel cell process, an exothermic process) for internally converting hydrocarbon to hydrogen and increasing energy efficiency of H-SOFCs. Moreover, a proton-conducting zirconate oxide (BaZr 0.8 Y 0.2 O 3 , BZY), which is stable in a CO 2 /H 2 O-containing atmosphere, is applied as an electrolyte and anode material of H-SOFCs. The operation of BZY-based H-SOFCs with internal SRM is assessed by thermodynamic calculation and experiments for the first time. The catalytic activity and coking resistance of the Ni-BZY anode for SRM are investigated thermodynamically and experimentally. Finally, the results demonstrate that the Ni-BZY anode possesses reasonable catalytic activity as well as good coking resistance for SRM at a temperature as low as 550 °C. Then, the electrochemical performance and durability of H-SOFCs operated with internal SRM are comprehensively studied from 550 °C to 700 °C.

25 ENERGY STORAGE↗

Jet fuel based high pressure solid oxide fuel cell system

A power system for an aircraft includes a solid oxide fuel cell system which generates electric power for the aircraft and an exhaust stream; and a heat exchanger for transferring heat from the exhaust stream of the solid oxide fuel cell to a heat requiring system or component of the aircraft. The heat can be transferred to fuel for the primary engine of the aircraft. Further, the same fuel can be used to power both the primary engine and the SOFC. A heat exchanger is positioned to cool reformate before feeding to the fuel cell. SOFC exhaust is treated and used as inerting gas. Finally, oxidant to the SOFC can be obtained from the aircraft cabin, or exterior, or both.

Gummalla, Mallika↗

Jet Fuel Based High Pressure Solid Oxide Fuel Cell System

A power system for an aircraft includes a solid oxide fuel cell system which generates electric power for the aircraft and an exhaust stream; and a heat exchanger for transferring heat from the exhaust stream of the solid oxide fuel cell to a heat requiring system or component of the aircraft. The heat can be transferred to fuel for the primary engine of the aircraft. Further, the same fuel can be used to power both the primary engine and the SOFC. A heat exchanger is positioned to cool reformate before feeding to the fuel cell. SOFC exhaust is treated and used as inerting gas. Finally, oxidant to the SOFC can be obtained from the aircraft cabin, or exterior, or both.

Gummalla, Mallika↗

Performance and Cost of a Natural Gas Fuel Cell Plant with Complete Internal Reforming

The performance and cost of a natural gas fueled, fuel cell (NGFC) power system with complete internal reformation (IR) is presented in this report. The report presents an update to a previous NGFC Pathway Study that includes carbon capture and storage (2011). IR utilizes heat generated in the fuel cell stack directly for the endothermic reformation reaction, improving system efficiency. NGFC systems with complete IR form the ultimate embodiment of the current fuel cell technology development program at the National Energy Technology Laboratory, which is consistent with the commercialization strategies being pursued in the stationary power generation sector.

03 NATURAL GAS↗