Accelerating Phase Field Simulations Through Time Extrapolation Using Adaptive Fourier Neural Operators and UNets
Explore the source record for details and available documents.
Bonneville, Christophe Pol Andre↗
SEARCH · Engineering Papers
Results for “Field Operators”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Stabilized operation mode of laser ion source using pulsed magnetic field
N/A
43 PARTICLE ACCELERATORS↗
Applied nonrelativistic conformal field theory: Scattering-length and effective-range corrections to rate of production of three neutrons at low relative momenta
Due to an accidentally large s-wave scattering length, in a relatively wide range of energy, neutrons are approximately described by the nonrelativistic conformal field theory of unitarity fermions, perturbed by one relevant and an infinite number of irrelevant operators. We develop a formalism which provides a nonperturbative definition of local operators in that nonrelativistic conformal field theory. We compute the scattering-length and effective-range corrections to the two-point functions of primary charge-three operators using the technique of conformal perturbation theory. These calculations allow us to find the first corrections to the scale-invariant behavior of the rate of nuclear reactions with three neutrons in the final state in the regime when the neutrons have small relative momenta.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
Operation and performance of VRF systems: Mining a large-scale dataset
The energy consumption of air-conditioning systems has gained increasing attention as it contributes significantly to the global building energy use. The variable refrigerant flow (VRF) system is a common air-conditioning system applied widely in residential and office buildings in China. Understanding the actual operation and performance of VRF systems is fundamental for the energy-efficient design and operation of VRF systems. Previous research on VRF system operation used either limited field data covering certain building types and climate zones or used a questionnaire to obtain a larger dataset. However, they did not capture the wide applications of VRF systems quantitatively across all building types, climate zones, and operating conditions. To fill this gap, statistical and clustering analysis was conducted on the newly proposed key performance indicators of approximately 287,000 VRF systems for residential and commercial buildings in all five climate zones in China. In this work, the main findings are: (1) VRF systems are mainly used for cooling in all climate zones in China; (2) among all building types, the duration of use is lowest in residential buildings and highest in hotels and medical buildings; (3) the distribution of the ideal VRF cooling coefficient of performance (COP) is similar across all climate zones and building types; whereas the COPs of ideal VRF heating in the Severe Cold region and Cold regions are lower than those in other climate zones; and (4) partial load operations for VRF systems are common in residential buildings and office buildings due to the part-time-part-space operation mode. These findings can inform the actual application of VRF systems in China, supporting the design, operation, industry standard development, and performance optimization of VRF systems.
32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
An inverted cylindrical sputter magnetron as metal vapor supply for electron cyclotron resonance ion sources
An inverted cylindrical sputter magnetron device has been developed. The magnetron is acting as a metal vapor supply for an electron cyclotron resonance (ECR) ion source. FEM simulation of magnetic flux density was used to ensure that there is no critical interaction between both magnetic fields of magnetron and ECR ion source. Spatially resolved double Langmuir probe and optical emission spectroscopy measurements show an increase in electron density by one order of magnitude from 1 × 10{sup 10} cm{sup −3} to 1 × 10{sup 11} cm{sup −3}, when the magnetron plasma is exposed to the magnetic mirror field of the ECR ion source. Electron density enhancement is also indicated by magnetron plasma emission photography with a CCD camera. Furthermore, photographs visualize the formation of a localized loss-cone - area, when the magnetron is operated at magnetic mirror field conditions. The inverted cylindrical magnetron supplies a metal atom load rate of R > 1 × 10{sup 18} atoms/s for aluminum, which meets the demand for the production of a milliampere Al{sup +} ion beam.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Auto-magnetizing liners for magnetized inertial fusion
Here, the MagLIF (Magnetized Liner Inertial Fusion) concept has demonstrated fusion-relevant plasma conditions on the Z accelerator using external field coils to magnetize the fuel before compression. We present a novel concept (AutoMag), which uses a composite liner with helical conduction paths separated by insulating material to provide fuel magnetization from the early part of the drive current, which by design rises slowly enough to avoid electrical breakdown of the insulators. Once the magnetization field is established, the drive current rises more quickly, which causes the insulators to break down allowing the drive current to follow an axial path and implode the liner in the conventional z-pinch manner. There are two important advantages to AutoMag over external field coils for the operation of MagLIF. Low inductance magnetically insulated power feeds can be used to increase the drive current, and AutoMag does not interfere with diagnostic access. Also, AutoMag enables a pathway to energy applications for MagLIF, since expensive field coils will not be damaged each shot. Finally, it should be possible to generate Field Reversed Configurations (FRC) by using both external field coils and AutoMag in opposite polarities. This would provide a means to studying FRC liner implosions on the 100 ns time scale.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Measurement of Wind Loading on Heliostats at the Crescent Dunes Power Plant: An Overview
The cost of solar collectors constitutes almost one third of the total cost of a CSP plant. One of the ongoing challenges in the design of these collectors is wind loading on mirrors, support structures, and drives. A particular challenge is dynamic wind loading, caused by the turbulent wind flow. To date, the design of solar collector structures has relied on wind tunnel experiments and numerical simulations that do not entirely capture the dynamic effects observed at scale. The CSP industry has shown increased interest in validating the idealized assumptions with measurements obtained in operational settings to improve wind load assumptions and increase reliability and cost-efficiency of the collector design. Further, performance models need realistic assumptions about wind loading and its impact on optical performance. In a parabolic trough field campaign, NREL successfully collected a wealth of long-term, high-resolution wind and loads data [2], that are publicly available and that can be used for the above-mentioned purposes. Heliostats are impacted differently by wind than parabolic troughs, due to their different shape, size, and field layout. To study the impact of wind and turbulence on heliostats, we initiated another field campaign in an operational power- tower plant, Crescent Dunes, in Nevada, USA. In this work, we present an overview of the measurements, first results, and potential implications of wind driven loads on Heliostats.
concentrated solar power↗
Analysis of Geothermal Reservoir and Well Operational Conditions using Monthly Production Reports from Nevada and California
When conducting techno-economic analysis of geothermal systems, assumptions are typically necessary for reservoir and wellbore parameters such as producer/injector well ratio, production temperature drawdown, and production/injection temperature, pressure and flow rate. To decrease uncertainty of several of these parameters, we analyzed field data reported by operators in monthly production reports. This paper presents results of a statistical analysis conducted on monthly production reports at 19 power plants in California and Nevada covering 196 production wells and 175 injection wells. The average production temperature was 304 degrees F (151 degrees C) for binary plants and 310 degrees F (154 degrees C) for flash plants. The average injection temperature was 169 degrees F (76 degrees C) for binary plants and 173 degrees F (78 degrees C) for flash plants. The average production temperature drawdown was 0.5% per year for binary plants and 0.8% per year for flash plants. The average production well flow rate was 112 L/s for binary plant wells and 62 L/s for flash plant wells. For all 19 plants combined, the median injectivity index value was 3.8 L/s/bar, and the average producer/injector well ratio was 1.6. As an additional example of analysis using data from monthly production reports, a coupled reservoir-wellbore model was developed to derive productivity curves at various pump horsepower settings. The workflow and model were applied to two example production wells.
15 GEOTHERMAL ENERGY↗
First Operation of a Resistive Shell Liquid Argon Time Projection Chamber: A New Approach to Electric-Field Shaping
We present a new technology for the shaping of the electric field in Time Projection Chambers (TPCs) using a carbon-loaded polyimide foil. This technology allows for the minimisation of passive material near the active volume of the TPC and, thus, is capable to reduce background events originating from radioactive decays or scattering on the material itself. Furthermore, the high and continuous electric resistivity of the foil limits the power dissipation per unit area and minimizes the risks of damages in the case of an electric field breakdown. Replacing the conventional field cage with a resistive plastic film structure called “shell” decreases the number of components within the TPC and, therefore, reduces the potential points of failure when operating the detector. A prototype liquid argon (LAr) TPC with such a resistive shell and with a cathode made of the same material was successfully tested for long-term operation with electric field values up to 1 . 6 k V /. The experiment shows that it is feasible to successfully produce and shape the electric field in liquefied noble-gas detectors with this new technology.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Impact of Parcel Size, Field Shape, Crop Yield, Storage Location, and Collection Equipment on the Performance of Single-Pass Cut-and-Chip Harvest System in Commercial Shrub Willow Fields
In this paper, an integrated system of harvesting, collecting, and transporting willow biomass crop to a storage site was modeled and evaluated using the IBSAL simulation model. A scenario analysis was used to quantify the impacts of five major input parameters on the performance of the integrated system. These parameters include parcel size, field shape, willow yield, distance to the storage site, and type of the collection equipment. Multiple performance indicators were identified to quantify the impacts on the system such as size of the equipment fleet, effective material and field capacity of the harvester, operating costs, and waiting times. The input data were collected from 36 commercial, short-rotation, shrub willow fields in northern New York State. The simulation results indicated that crop yield and type of collection equipment have the highest impact on operating costs and the equipment fleet size. As the size of equipment fleet increases in the system, variability in the system performance tends to increase. Field shape has the least impact on the overall system performance compared to the other four input parameters. The simulation results suggest that a combination of performance indicators need to be considered to evaluate the overall performance of the dynamic and complex system of harvesting, collection and transportation in commercial willow fields. The developed IBSAL model and scenario analysis approach can assist in planning this system based on the characteristics of field, crop, and logistical equipment to reach a high system performance.
54 ENVIRONMENTAL SCIENCES↗
Keyless Infrastructure Security Solution (KISS) (Technology Landscape Analysis Report)
The following landscape analysis explores blockchain or distributed ledger technologies application to securing electricity infrastructure. The exploration of how distributed ledger technologies can be used to increase the trustworthiness and integrity of the grid’s edge is imperative to the economic, security and well-being of all modern societies that rely on electricity. Blockchain technology’s ability to secure, track and optimize complex data transactions provides an exciting value proposition to securing and optimizing the U.S. power grid. An energy delivery system (EDS) operating at the grid’s edge requires unprecedented levels of security and trustworthiness to verify integrity of data and manage complex transactive and distributed Energy Resources (DERs) exchanges. Moreover, grid-edge devices lack visibility, control and security to conduct real-time energy transactions with the required security, speed and scale. The U.S. power grid is a complex system of systems that requires secure, reliable and trustworthy EDSs. Grid modernization has increased the speed and size of data sets exchanged on these systems (Gordes and Mylrea 2014). Exasperating the challenge is these systems are increasingly distributed creating new data fidelity and interoperability challenges for grid operators struggling to balance and incorporate DERs. Blockchain technology provides an atomically verifiable cryptographic signature to help increase the trustworthiness of EDSs at the grid’s edge. This feature is especially important at distribution level since EDSs and field devices have increasing operational and security requirements that are often diametrically opposed. For example, as data, speed and analytic requirements increase, security and functionality requirements increase. Further, as the grid’s edge incorporate DERs and transacts in real time, availability is prioritized over the integrity and confidentially of that data. Blockchain presents the prospect of solving some of these complex challenges related to grid security and modernization. However, there are more questions about blockchain applicability than answers. There are number of theoretical blockchain applications to the energy sector, but few energy utilities have actually applied, implemented or even experimented with the underlying distributed ledger technology and consensus algorithms that enable blockchain to exchange data more efficiently and securely.
24 POWER TRANSMISSION AND DISTRIBUTION↗
Second quantized scalar QED in homogeneous time-dependent electromagnetic fields
We formulate the second quantization of a charged scalar field in homogeneous, time-dependent electromagnetic fields, in which the Hamiltonian is an infinite system of decoupled, time-dependent oscillators for electric fields, but it is another infinite system of coupled, time-dependent oscillators for magnetic fields. We then employ the quantum invariant method to find various quantum states for the charged field. For time-dependent electric fields, a pair of quantum invariant operators for each oscillator with the given momentum plays the role of the time-dependent annihilation and the creation operators, constructs the exact quantum states, and gives the vacuum persistence amplitude as well as the pair-production rate. We also find the quantum invariants for the coupled oscillators for the charged field in time-dependent magnetic fields and advance a perturbation method when the magnetic fields change adiabatically. Finally, the quantum state and the pair production are discussed when a time-dependent electric field is present in parallel to the magnetic field.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
An illustration of the light-front coupled-cluster method in quantum electrodynamics
A field-theoretic formulation of the exponential-operator technique is applied to a nonperturbative Hamiltonian eigenvalue problem in electrodynamics, quantized in light-front coordinates. Specifically, we consider the dressed-electron state, without positron contributions but with an unlimited number of photons, and compute its anomalous magnetic moment. A simple perturbative solution immediately yields the Schwinger result of {alpha}/2{pi}. The nonperturbative solution, which requires numerical techniques, sums a subset of corrections to all orders in {alpha} and incorporates additional physics.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
A Study on the Use of XCT and FEA to Predict the Elastic Behavior of Additively Manufactured Parts of Cylindrical Geometry
Defining general criteria for the acceptability of defects within industrial components is often complicated, since the specific load conditions and the criticality of the given application should be considered individually. In order to minimize the risk of failure, high safety factors are commonly adopted during quality control. However this practice is likely to cause the rejection of components whose defects would be instead acceptable if a more sound knowledge of the component behaviour were achieved. Parts produced by additive manufacturing (AM) may suffer from various defects, including micro- or macro-holes, delamination and microstructural discontinuities. Such processes, which are specially suitable for one-off components, require robust and reliable inspection before a part is accepted or rejected, since the refusal of even a single part at the end of the production process represents a significant loss. For this reason, it would be very useful to simulate in a reliable way whether a certain defect is truly detrimental to the proper working of the part during operation or whether the component can still be used, despite the presence of a defect. To this purpose, the paper highlights the benefits of a synergistic interaction between Industrial X-ray computed tomography (XCT) and finite element analysis (FEA). Internal defects of additively manufactured parts can be identified in a non-destructive way by means of XCT. Then FEA can be performed on the XCT-based virtual model of the real component, rather than on the ideal CAD geometry. A proof of concept of this approach is proposed here for a reference construct produced in an Aluminium alloy by AM. Numerical results of the proposed combined XCT–FEA procedure are contrasted with experimental data from tensile tests. The findings sustain the reliability of the method and allow to assess its full provisional accuracy for parts of cylindrical geometry designed to operate in the elastic field. The paper moves a step beyond the present application limits of tomography as it is currently employed for AM parts and it evidences instead the possibility of extending the usage of tomography to acceptance testing and prediction of operative behaviour.
42 ENGINEERING↗
A Power Takeoff Device for a Small Marine Hydrokinetic Turbine Deployed from an Unmanned Floating Platform
The design, development, and field-testing of a power takeoff (PTO) device equipped with a ball-type continuously-variable transmission (B-CVT) for a small marine hydrokinetic (MHK) turbine deployed from a floating unmanned autonomous mobile catamaran platform is described. The turbine is a partially-submerged multi-blade undershot waterwheel (USWW). The objective is to develop a PTO for the optimal conversion of the MHK energy harnessed by the turbine to electric power, which is stored in battery banks onboard the MHK platform. Modeling, simulation, and bench testing of the USWW and PTO show the feasibility of utilizing the B-CVT's variable gear ratio to decouple the USWW and generator speeds, maintaining the waterwheel within its optimal tip speed ratio (TSR) while varying the generator speed, thereby increasing the efficiency of the PTO. Results of bench and field testing in support of characterizing the power conversion capabilities of the PTO are described. The system being developed is in support of potential self-powered autonomous mobile recharge stations for unmanned aerial vehicles (U A V s) operating in coastal zones. Field tests of the complete MHK platform with 9 blades on the waterwheel and wheel sub mergences of 10 and 12 inches (full blade submergence) were performed. The overall proof-of-concept was successfully demonstrated, with the system satisfactorily capturing and converting water flow energy into electricity. The feasibility of utilizing the B-CVT as a means of increasing the PTO power capture capabilities and efficiency is analyzed.
Pimentel, Hugo↗
Dualities among massive, partially massless and shift symmetric fields on (A)dS
We catalog all the electromagnetic-like dualities that exist between free dynamical bosonic fields of arbitrary symmetry type and mass on (anti-) de Sitter space in all dimensions, including dualities among the partially massless and shift symmetric fields. This generalizes to all these field types the well known fact that a massless p-form is dual to a massless (D − p − 2)-form in D spacetime dimensions. In the process, we describe the structure of the Weyl modules (the spaces of local operators linear in the fields and their derivative relations) for all the massive, partially massless and shift symmetric fields.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Assessment of ITER radiation environment during the remote-handling operation of In-Vessel components with D1SUNED
During ITER operational life, a remote-handled cask will be used to transfer In-Vessel components to the Hot Cell for maintenance, storage and decommissioning purposes. Due to the distribution of penetrations for system allocation in the facility, the radiation field of each transfer operation presents a high spatial variability; all operations must be studied independently for workers and electronics protection. In this paper, we present a fully representative approach to describe the radiation environment during the complete remote-handling scenario of In-Vessel components in the ITER facility. The impact of all relevant radiation sources during different stages of the operation is addressed. As-built structures and 2020 baseline designs are considered to produce the most detailed neutronics model of the Tokamak Complex, the 400,000-tonne civil structure hosting the tokamak, up to date. Novel capabilities of the D1SUNED code have allowed to compute the integral dose, the dose rate and the photon-induced neutron flux of both moving and static radiation sources. Time bins are included in the simulations to compute the dose rate caused by In-Vessel components at all positions along the transfer. The time evolution of the dose rate is built in video format with a 1-m resolution, especially valuable for hot-spots identification.
42 ENGINEERING↗
Status of the ELISE test facility
The test facility ELISE, equipped with a large radio frequency (RF) driven ion source (1×0.9 m2) of half the size of the ion source for the ITER neutral beam injection (NBI) system, is operational since beginning of 2013. The first experimental campaign was dedicated to a thorough qualification of the test facility and its diagnostic tools at low RF power (80 kW in total, i.e. 20 kW per driver) in volume operation, i.e. operation without cesium, where the negative hydrogen ion production is done in the plasma volume only. This paper reports on the main results of the second and third experimental campaigns, where Cs was inserted in the ion source for an enhancement of the negative ion production by the surface process. The second experimental campaign was done still with low RF power, both for hydrogen and deuterium, with pulse lengths of up to 500 s. The results of this campaign are rather encouraging, especially in hydrogen, where large current densities with respect to the low RF power could be achieved at a ratio of co-extracted electrons to extracted ions of 0.5-0.6 at the relevant source pressure of 0.3 Pa. Similar large extracted ion currents could be achieved also in deuterium, but with larger amounts of co-extracted electrons. The required ratio of co-extracted electrons to extracted ions of one could be achieved only in short pulses. The third experimental campaign aimed then for approaching the required ITER NBI parameters with respect to the ion and electron extracted currents, both for hydrogen and deuterium, by increasing the RF power with short pulses, i.e. beam-on times of up to 10 s and RF-on time up to 20 s. Current densities near the ITER NBI requirements could be achieved in hydrogen at a ratio of co-extracted electrons to extracted ions of 0.5-0.6 at the relevant source pressure of 0.3 Pa. As it was the case for the low RF operation, the required filter field was significantly lower than expected from the experience with the small prototype RF source. Similar large extracted ion currents could be achieved also in deuterium, but with larger amounts of co-extracted electrons; the main problem in deuterium operation are the non-stable currents of the co-extracted electrons, most probably caused by the high dynamic of the Cs redistribution in the system. The reasons for this larger instability are still under investigation.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗