SEARCH · Engineering Papers

Results for “Feature importance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

All sources NASA NTRS DOE OSTI

NASA NTRS1978

F100(3) parallel compressor computer code and user's manual

The Pratt & Whitney Aircraft multiple segment parallel compressor model has been modified to include the influence of variable compressor vane geometry on the sensitivity to circumferential flow distortion. Further, performance characteristics of the F100 (3) compression system have been incorporated into the model on a blade row basis. In this modified form, the distortion's circumferential location is referenced relative to the variable vane controlling sensors of the F100 (3) engine so that the proper solution can be obtained regardless of distortion orientation. This feature is particularly important for the analysis of inlet temperature distortion. Compatibility with fixed geometry compressor applications has been maintained in the model.

Mazzawy, R. S.↗

NASA NTRS1981

A navigation model for the Venusian atmosphere

A static, exponential atmosphere model for Venus has been developed using period change data from the Pioneer Venus spacecraft. The model was derived from approximately 600 passages of the spacecraft through the upper Venusian atmosphere, or almost three full circulations of the planet. The model reflects several important, known atmospheric features (diurnal bulge, layering, etc.) and confirms several observations of a more sophisticated analysis. Several new phenomena were observed and successfully modeled.

Birkeland, P. W.↗

NASA NTRS1982

The Space Telescope Observatory

The history of the observatory is briefly described, as is the overall system design. The principal design features that are important to the scientific user are described. The present status of preparation for launch in the spring of 1985 is summarized.

Odell, C. R.↗

NASA NTRS1982

Galactic and zodiacal light surface brightness measurements with the Atmosphere Explorer satellites

Galactic and zodiacal light surface maps based on the Atmosphere Explorer-C, -D, and -E satellite data are presented at 7320, 6300, 5577, 5200, and 4278 A. A procedure used to generate these maps, which involves separation of the individual stars and diffuse starlight from the zodiacal light, is described in detail. The maps can be used in atmospheric emission studies to correct for galactic emissions which contaminate satellite as well as ground-based photometric observations. The zodiacal light maps show enhanced features which are important for understanding the nature of interplanetary dust.

Abreu, V. J.↗

NASA NTRS1981

Exploration for fractured petroleum reservoirs using radar/Landsat merge combinations

Since fractures are commonly propagated upward and reflected at the earth's surface as subtle linears, detection of these surface features is extremely important in many phases of petroleum exploration and development. To document the usefulness of microwave analysis for petroleum exploration, the Arkansas part of the Arkoma basin is selected as a prime test site. The research plan involves comparing the aircraft microwave imagery and Landsat imagery in an area where significant subsurface borehole geophysical data are available. In the northern Arkoma basin, a positive correlation between the number of linears in a given area and production from cherty carbonate strata is found. In the southern part of the basin, little relationship is discernible between surface structure and gas production, and no correlation is found between gas productivity and linear proximity or linear density as determined from remote sensor data.

Macdonald, H.↗

NASA NTRS1983

Crop identification of SAR data using digital textural analysis

After preprocessing SEASAT SAR data which included slant to ground range transformation, registration to LANDSAT MSS data and appropriate filtering of the raw SAR data to minimize coherent speckle, textural features were developed based upon the spatial gray level dependence method (SGLDM) to compute entropy and inertia as textural measures. It is indicated that the consideration of texture features are very important in SAR data analysis. The SEASAT SAR data are useful for the improvement of field boundary definitions and for an earlier season estimate of corn and soybean area location than is supported by LANDSAT alone.

Nuesch, D. R.↗

NASA NTRS1984

Temporal evolution of the solar wind and the formation of a standing shock

The temporal evolution of the solar wind from one steady state to another is explored when momentum deposition produces multiple critical points in the flow. It is shown that the wind always evolves in time to a new steady state compatible with the solution of the steady state equation of motion. However, for the same initial state and identical asymptotic momentum deposition rate, the temporal evolution pattern of the wind depends on the detailed time history of momentum addition and is therefore not unique. This feature plays an important role in the particular case when multiple (three in this study) steady states exist for identical boundary conditions; each one of these solutions is thus shown to be physically accessible. The details of the temporal evolution pattern of the wind reveal the formation of a shock discontinuity whenever the flow becomes supersonic at a critical point upstream from the initial critical point. If the flow remains supersonic at that inner critical point, the shock can become a standing one, depending on the strength and the temporal history of momentum addition. The results of this study indicate that the time scale required for the solar wind to evolve between steady states is of the order of 30-60 hours. Furthermore, the results also reveal the interesting and novel phenomenon that a standing shock is likely to develop in the inner solar wind flow within this time frame, in particular, in coronal hole regions with rapidly diverging geometries.

Habbal, S. R.↗

NASA NTRS1984

On Bowen enhancement of the N III spectrum under solar and nebular conditions

Expected enhancement of the N III emission-line spectrum by the Bowen He II to O III to N III resonant photoexcitation process is computed using a six-configuration model. Preliminary comparisons with available solar and nebular observations indicate that the process may play only a small role, although photoexcitation quenching of the N III and O III far-infrared fine-structure lines is noted as a possibly important mechanism. Some features are discussed in connection with the nebular emission at 1750 A, which is suggested as an indicator of excitation class for planetary nebulae.

Kastner, S. O.↗

NASA NTRS1985

Graphics and flow visualization in computational fluid dynamics

Techniques for displaying two- and three-dimensional flowfield solutions are described. Several methods of illustrating flow structure are addressed including particle tracing, simulated oil flow, and shock finding. These are incorporated into an interactive graphics program for CFD flowfields, called PLOT3D. Emphasis is made on the difficulty in visualizing three-dimensional flow features, and the importance of color, fast 3D image manipulation, and dynamic movie play-back in displaying such flows. The need for advanced algorithms to identify shock waves, vortices, and separation lines is pointed out. It is likely that the supercomputer will be needed for this process because of the size of 3D and/or unsteady CFD databases.

Buning, P. G.↗

NASA NTRS1985

GRM crustal magnetic anomalies: Separating the Lord Howe Rise and Norfolk Ridge submarine structures

Multiple source bodies often lie within the resolution element of the MAGSAT and POGO data. Small weak sources lying near larger stronger sources will tend to be missed, although they do contribute to the total observed anomaly. Lower elevation magnetic anomaly surveys such as GRM alleviate this problem through the combined effects of significantly greater resolution and stronger signal amplitude. This permits the detection of smaller source bodies, and analysis of their structure and nature. The improvement a GRM will provide is demonstrated in the Lord Howe Rise/Norfolk Ridge area east of Australia, between the Tasman Sea and south Fiji Basin. The submarine features origin have important plate tectonic implications. The Lord Howe Rise (LHR) is a continental fragment broken off from Australia by the opening of the Tasman Sea. It is a wide, shallow structure lying between 160 and 165 deg longitude at 23 to 37 deg S latitude. Seismic refraction data show the LHR crust extending to depths in excess of 20 km.

Frey, H.↗

NASA NTRS1987

Improved VAS regression soundings of mesoscale temperature structure observed during the 1982 atmospheric variability experiment

An Atmospheric Variability Experiment (AVE) was conducted over the central U.S. in the spring of 1982, collecting radiosonde date to verify mesoscale soundings from the VISSR Atmospheric Sounder (VAS) on the GOES satellite. Previously published VAS/AVE comparisons for the 6 March 1982 case found that the satellite retrievals scarcely detected a low level temperature inversion or a mid-tropospheric cold pool over a special mesoscale radiosonde verification network in north central Texas. The previously published regression and physical retrieval algorithms did not fully utilize VAS' sensitivity to important subsynoptic thermal features. Therefore, the 6 March 1982 case was reprocessed adding two enhancements to the VAS regression retrieval algorithm: (1) the regression matrix was determined using AVE profile data obtained in the region at asynoptic times, and (2) more optimistic signal-to-noise statistical conditioning factors were applied to the VAS temperature sounding channels. The new VAS soundings resolve more of the low level temperature inversion and mid-level cold pool. Most of the improvements stems from the utilization of asynoptic radiosonde observations at NWS sites. This case suggests that VAS regression soundings may require a ground-based asynoptic profiler network to bridge the gap between the synoptic radiosonde network and the high resolution geosynchronous satellite observations during the day.

Chesters, Dennis↗

NASA NTRS1986

Scientific investigations at a lunar base

Studies of lunar origin and history, astronomy, and applications of lunar environmental conditions to experiments in physics and chemistry are examined to gain some insight into their control over site selection and base characteristics. Lunar studies most likely will be distinguished by needs for surface mobility and laboratory support; astronomy will require initial construction and servicing by crews on a sporadic basis; physics and chemistry experiments will require complex facilities and the ability to support a research staff and supporting laboratory and fabrication shop facilities. Lunar bases dominated by lunar investigations will be sited relatively near important lunar geological features. Astronomical facilities may require access to the lunar limb or poles. Physics and chemistry facilities are probably not strongly tied to the specific base locations.

Duke, M. B.↗

NASA NTRS1989

Propulsion over a wide Mach number range

Criteria is presented to assess the relative merits of different propulsion systems. Previous references focus mainly on subsonic or low supersonic flight speeds. The main focus here is on a higher range, from low supersonic to orbital velocities. Air breathing propulsion systems for hypersonic flight persent the engine designer with circumstances that differ in important fundamental ways from those encountered in engines designed for operation at subsonic or low supersonic speeds. This analysis highlights the importance of various features of hypersonic engine design. Since the performance of hypersonic engines are energy limited, unlike low speed engines which are stagnation pressure limited, the efficient use of the energy of the fuel used is critical to minimize the take-off fuel mass fraction of the vehicle. Furthermore, since the required energy increase of a vehicle per incremental speed change increases with speed, the engine must be designed to operate efficiently at high speed. An analysis of engine performance in terms of entropy changes of the flow passing through the engine allows comparison of various engine designs as well as a convenient method to determine the effect of individual engine component efficiencies on overall engine performance.

Resler, Edwin L., Jr.↗

NASA NTRS1991

Mesospheric KHI signatures in reconstructed broadband rocket probe data

In an accepted method of measuring D region electron density with a rocket-borne dc-mode Langmuir probe, the resulting fine-structure signal is modified by a high-pass filter. While this form of data has been successfully used for power spectral analysis, it fails to reveal important spatial domain features without further processing. It is demonstrated that the broadband signal can be recovered by use of a digital filter that corrects for the on-board high-pass filter effects. The D-region broadband structure so recovered for a daytime equatorial flight shows variations in electron density consistent with a model of Kelvin-Helmholtz billows, and not consistent with inertial range turbulence. The isolated regions of irregularity are about 100 m thick near an altitude of 75 km, imbedded in a region with a staircase-structure electron density profile with about 200-m steps. Suggestive similarities to a numerical model of KHI are to undersea observations of KHI-caused microstructure are shown.

Parker, Jay W.↗

NASA NTRS1992

How to securely replicate services (preliminary version)

A method is presented for constructing replicated services that retain their availability and integrity despite several servers and clients being corrupted by an intruder, in addition to others failing benignly. More precisely, a service is replicated by 'n' servers in such a way that a correct client will accept a correct server's response if, for some prespecified parameter, k, at least k servers are correct and fewer than k servers are correct. The issue of maintaining causality among client requests is also addressed. A security breach resulting from an intruder's ability to effect a violation of causality in the sequence of requests processed by the service is illustrated. An approach to counter this problem is proposed that requires that fewer than k servers are corrupt and, to ensure liveness, that k is less than or = n - 2t, where t is the assumed maximum total number of both corruptions and benign failures suffered by servers in any system run. An important and novel feature of these schemes is that the client need not be able to identify or authenticate even a single server. Instead, the client is required only to possess at most two public keys for the service.

Reiter, Michael↗

NASA NTRS1992

How to securely replicate services

A method is presented for constructing replicated services that retain their availability and integrity despite several servers and clients corrupted by an intruder, in addition to others failing benignly. More precisely, a service is replicated by n servers in such a way that a correct client will accept a correct server's response if, for some prespecified parameter k, at least k servers are correct and fewer than k servers are corrupt. The issue of maintaining causality among client requests is also addressed. A security breach resulting from an intruder's ability to effect a violation of causality in the sequence of requests processed by the service is illustrated. An approach to counter this problem is proposed that requires fewer than k servers to be corrupt and that is live if at least k+b servers are correct, where b is the assumed maximum total number of corrupt servers in any system run. An important and novel feature of these schemes is that the client need not be able to identify or authenticate even a single server. Instead, the client is required only to possess at most two public keys for the service. The practicality of these schemes is illustrated through a discussion of several issues pertinent to their implementation and use, and their intended role in a secure version of the Isis system is also described.

Reiter, Michael↗

NASA NTRS1994

David Florida Laboratory Thermal Vacuum Data Processing System

During 1991, the Space Simulation Facility conducted a survey to assess the requirements and analyze the merits for purchasing a new thermal vacuum data processing system for its facilities. A new, integrated, cost effective PC-based system was purchased which uses commercial off-the-shelf software for operation and control. This system can be easily reconfigured and allows its users to access a local area network. In addition, it provides superior performance compared to that of the former system which used an outdated mini-computer and peripheral hardware. This paper provides essential background on the old data processing system's features, capabilities, and the performance criteria that drove the genesis of its successor. This paper concludes with a detailed discussion of the thermal vacuum data processing system's components, features, and its important role in supporting our space-simulation environment and our capabilities for spacecraft testing. The new system was tested during the ANIK E spacecraft test, and was fully operational in November 1991.

Choueiry, Elie↗

NASA NTRS1998

Global Failure Modes in High Temperature Composite Structures

Composite materials have been considered for many years as the major advance in the construction of energy efficient aerospace structures. Notable advances have been made in understanding the special design considerations that set composites apart from the usual "isotropic" engineering materials such as the metals. As a result, a number of significant engineering designs have been accomplished. However, one shortcoming of the currently favored composites is their relatively unforgiving behavior with respect to failure (brittleness) under seemingly mild impact conditions and large efforts are underway to rectify that situation, much along the lines of introducing thermoplastic matrix materials. Because of their relatively more pronounced (thermo) viscoelastic behavior these materials respond with "toughness" in fracture situations. From the point of view of applications requiring material strength, this property is highly desirable. This feature impacts several important and distinct engineering problems which have been' considered under this grant and cover the 1) effect of impact damage on structural (buckling) stability of composite panels, the 2) effect of time dependence on the progression of buckling instabilities, and the 3) evolution of damage and fracture at generic thickness discontinuities in structures. The latter topic has serious implications for structural stability problems (buckling failure in reinforced shell structures) as well as failure progression in stringer-reinforced shell structures. This grant has dealt with these issues. Polymer "toughness" is usually associated with uncrosslinked or thermo-plastic polymers. But, by comparison with their thermoset counterparts they tend to exhibit more pronounced time dependent material behavior; also, that time dependence can occur at lower temperatures which places restriction in the high temperature use of these "newer and tougher" materials that are not quite so serious with the thermoset matrix materials. From a structural point of view the implications of this material behavior are potentially severe in that structural failure characteristics are no longer readily observed in short term qualification tests so characteristic for aerospace structures built from typical engineering metals.

Knauss, W. G.↗