Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FOSSIL FUEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Sulfur Speciation in Biochars by Very High Resolution Benchtop Kα X-ray Emission Spectroscopy

The analytical chemistry of sulfur-containing materials poses substantial technical challenges, especially due to the limitations of 33S NMR and the time-intensive preparations required for wet-chemistry analyses. A number of prior studies have found that synchrotron-based X-ray absorption near edge structure (XANES) measurements can give detailed speciation of sulfur chemistry in such cases. However, due to the obvious access limitations, synchrotron XANES of sulfur cannot be part of routine analytical practice across the chemical sciences community. Here, in a study of the sulfur chemistry in biochars, we compare and contrast the chemical inferences available from synchrotron XANES with that given by benchtop, extremely high resolution wavelength-dispersive X-ray fluorescence (WD-XRF) spectroscopy, also often called X-ray emission spectroscopy (XES). While the XANES spectra have higher total information content, often giving differentiation between different moieties having the same oxidation state, the lower sensitivity of the S Ka XES to coordination and local structure provides pragmatic benefit for the more limited goal of quantifying the S oxidation state distribution. Within that constrained metric, we find good agreement between the two methods. As the sulfur concentrations were as low as 150 ppm, these measurements provide proof-of-principle for characterization of the sulfur chemistry of biochars and potential applications to other areas such as soils, batteries, catalysts, and fossil fuels and their combustion products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Molecular Dynamics of Combustion Reactions in Supercritical Carbon Dioxide. Part 5: Computational Study of Ethane Dissociation and Recombination Reactions C 2 H 6 ⇌ CH 3 + CH 3

Fossil fuel oxy-combustion is an emerging technology where the habitual nitrogen diluent is replaced by high-pressure supercritical CO 2 (sCO 2 ), which increases the efficiency of energy conversion. In this study, the chemical kinetics of the combustion reaction C 2 H 6 ⇌ CH 3 + CH 3 in the sCO 2 environment is predicted at 30–1000 atm and 1000–2000 K. We adopt a multiscale approach, where the reactive complex is treated quantum mechanically in rigid rotor/harmonic oscillator approximation, while environment effects at different densities are taken into account by the potential of mean force, produced with classical molecular dynamics (MD). Here, we used boxed MD, where enhanced sampling of infrequent events of barrier crossing is accomplished without application of the bias potential. The multistate empirical valence bond model is applied to describe free radical formation accurately at the cost of the classical force field. Predicted rates at low densities agree well with the literature data. In conclusion, rate constants at 300 atm are 2.41 × 10 14 T –0.20 exp(–77.03 kcal/mol/RT) 1/s for ethane dissociation and 8.44 × 10 –19 T 1.42 exp(19.89 kcal/mol/RT) cm 3 /molecule/s for methyl–methyl recombination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Molecular Dynamics Simulations of Supercritical Carbon Dioxide and Water using TraPPE and SWM4-NDP Force Fields

The increased levels of carbon dioxide (CO 2 ) emissions due to the combustion of fossil fuels and the consequential impact on global climate change have made CO 2 capture, storage, and utilization a significant area of focus for current research. In most electrochemical CO 2 applications, water is used as a proton donor due to its high availability and mobility and use as a polar solvent. Additionally, supercritical CO 2 is a promising avenue for electrochemical applications due to its unique chemical and physical properties. Consequently, understanding the interactions between water and supercritical CO 2 is of great importance for future electrochemical applications. Molecular dynamics (MD) simulation is a powerful tool that enables atomistic-resolution dynamics of molecular systems, which can complement and guide future experimental investigations. This study employed atomistic MD to study the cosolubilities, codiffusivities, and structure of supercritical CO 2 and water systems, with a polarizable water model (SWM4-NDP) and a nonpolarizable CO 2 model (TraPPE). Additionally, ab initio MD simulations were used to better understand how atomistic polarizable/nonpolarizable models compare to explicit modeling of electron densities. The polarizable water model exhibited substantial improvement in water-associated properties. In conclusion, we anticipate the development of a compatible polarizable CO 2 model to yield similar improvement, providing a pathway for realizing novel high-pressure electrochemical systems.

25 ENERGY STORAGE↗
DOE OSTI2018

Renewable Hydride Donors for the Catalytic Reduction of CO 2 : A Thermodynamic and Kinetic Study

Increasing atmospheric CO2 concentration and dwindling fossil fuel supply necessitate the search for efficient methods for CO2 conversion to fuels. Assorted studies have shown pyridine and its derivatives capable of (photo)electrochemically reducing CO2 to methanol, and some mechanistic interpretations have been proposed. Here, we analyze the thermodynamic and kinetic aspects of the efficacy of pyridines as hydride-donating catalytic reagents that transfer hydrides via their dihydropyridinic form. We investigate both the effects of functionalizing pyridinic derivatives with electron-donating and electron-withdrawing groups on hydride-transfer catalyst strength, assessed via their hydricity (thermodynamic ability) and nucleophilicity (kinetic ability), and catalyst recyclability, assessed via their reduction potential. We find that pyridines substituted with electron-donating groups have stronger hydride-donating ability (having lower hydricity and larger nucleophilicity values), but are less efficiently recycled (having more negative reduction potentials). In contrast, pyridines substituted with electron-withdrawing groups are more efficiently recycled, but are weaker hydride donors. Functional group modification favorably tunes hydride strength or efficiency, but not both. We attribute this problematic coupling between the strength and recyclability of pyridinic hydrides to their aromatic nature and suggest several avenues for overcoming this difficulty.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Selective Electrocatalytic Reduction of CO 2 into CO at Small, Thiol-Capped Au/Cu Nanoparticles

The electrochemical CO 2 reduction reaction (CO 2 RR) is a promising approach for converting fossil fuel emissions into environmentally sustainable chemicals and fuels. The ability to control the surface structure of CO 2 RR nanocatalysts provides an opportunity to tune product selectivity. Bimetallic gold–copper catalysts have been identified as emerging electrocatalyst candidates, but Cu incorporation typically lowers product selectivity compared with pure Au. Here we show sustained CO selectivity and activity up to 49% Cu content in small (<2 nm), thiol-capped Au/Cu nanoparticles (NPs). Bimetallic NPs containing 49% Cu selectivity converted CO 2 into CO with 100 ± 6% CO Faradaic efficiency and average mass activity of ~500 mA/mg during a 12 h electrolysis experiment at –0.8 V vs RHE. Au/Cu NPs synthesized without thiol ligands selectively produced H 2 , whereas larger (>10 nm), thermally dethiolated Au/Cu NPs produced a wider product distribution including H 2 , CO, and C 2 H 4 . Density functional theory (DFT) modeling of CO 2 RR and H 2 evolution at realistic, thiol-capped Au/Cu NP structures indicated that copper–thiol surface structures sustained CO selectivity by stabilizing key *CO intermediates while making *H binding less favorable. Calculations also predicted that removing a significant fraction of the thiol ligands would increase *CO binding strength such that desorption of CO product molecules could become the most thermodynamically challenging step. This result, coupled with increased *H stability on dethiolated nanoclusters, points to decreased CO 2 RR selectivity for small, ligand-free catalysts, which is in line with experimental observations from our group and others. Here, our results demonstrate that thiol-ligand surface structures can sustain the CO selectivity of bimetallic Au/Cu NPs and reduce precious metal requirements for CO 2 RR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Nanoscale Detection of Intermediate Solid Solutions in Equilibrated Li x FePO 4 Microcrystals

Redox-driven phase transformations in solids determine the performance of lithium-ion batteries, crucial in the technological transition from fossil fuels. Couplings between chemistry and strain define reversibility and fatigue of an electrode. The accurate definition of all phases in the transformation, their energetics, and nanoscale location within a particle produces fundamental understanding of these couplings needed to design materials with ultimate performance. In this paper we demonstrate that scanning X-ray diffraction microscopy (SXDM) extends our ability to image battery processes in single particles. In LiFePO 4 crystals equilibrated after delithiation, SXDM revealed the existence of domains of miscibility between LiFePO 4 and Li 0.6 FePO 4 . These solid solutions are conventionally thought to be metastable, and were previously undetected by spectromicroscopy. The observation provides experimental verification of predictions that the LiFePO 4 –FePO 4 phase diagram can be altered by coherency strain under certain interfacial orientations. Finally, it enriches our understanding of the interaction between diffusion, chemistry, and mechanics in solid state transformations.

25 ENERGY STORAGE↗
DOE OSTI2018

High-Temperature Refractory Metasurfaces for Solar Thermophotovoltaic Energy Harvesting

Solar energy promises a viable solution to meet the ever-increasing power demand by providing a clean, renewable energy alternative to fossil fuels. For solar thermophotovoltaics (STPV), high-temperature absorbers and emitters with strong spectral selectivity are imperative to efficiently couple solar radiation into photovoltaic cells. We demonstrate refractory metasurfaces for STPV with tailored absorptance and emittance characterized by in situ high-temperature measurements, featuring thermal stability up to at least 1200 °C. Our tungsten-based metasurface absorbers have close-to-unity absorption from visible to near-infrared and strongly suppressed emission at longer wavelengths, while our metasurface emitters provide wavelength-selective emission spectrally matched to the band-edge of InGaAsSb photovoltaic cells. The projected overall STPV efficiency is as high as 18% when a fully integrated absorber/emitter metasurface structure is employed, which is comparable to the efficiencies of the best currently available commercial single-junction PV cells and can be further improved to potentially exceed those in mainstream photovoltaic technologies. Finally, our work opens a path forward for high-performance STPV systems based on refractory metasurface structures.

14 SOLAR ENERGY↗
DOE OSTI2024

The Role of Interface Band Alignment in Epitaxial SrTiO 3 /GaAs Heterojunctions

Recent concerns surrounding climate change and the contribution of fossil fuels to greenhouse gas (GHG) emissions have sparked interest and advancements in renewable energy sources including wind, solar, and hydroelectricity. These energy sources, often referred to as “clean energy”, generate no operational onsite GHG emissions. They also offer the potential for clean hydrogen production through water electrolysis, presenting a viable solution to create an environmentally friendly alternative energy carrier with the potential to decarbonize industrial processes reliant on hydrogen. To conduct a full life cycle analysis, it is crucial to account for the embodied emissions associated with renewable and nuclear power generation plants as they can significantly impact the GHG emissions linked to hydrogen production and its derived products. In this work, we conducted a comprehensive analysis of the embodied emissions associated with solar photovoltaic (PV), wind, hydro, and nuclear electricity. We investigated the implications of including plant-embodied emissions in the overall emission estimates of electrolysis hydrogen production and subsequently on the production of synthetic ammonia, methanol, and Fischer– Tropsch (FT) fuels. Results show that average embodied GHG emissions of solar PV, wind, hydro, and nuclear electricity generation in the United States (U.S.) were estimated to be 37, 9.8, 7.2, and 0.3 g CO 2 e/kWh, respectively. Life cycle GHG emissions of electrolytic hydrogen produced from solar PV, wind, and hydroelectricity were estimated as 2.1, 0.6, and 0.4 kg of CO 2 e/kg of H 2 , respectively, in contrast to the zero-emissions often used when the embodied emissions in their construction were excluded. Average life cycle emission estimates (CO 2 e/kg) of synthetic ammonia, methanol, and FT-fuel from solar PV electricity are increased by 5.5, 16, and 49 times, respectively, compared to the case when embodied emissions are excluded. This change also depends on the local irradiance for solar power, which can result in a further increase of GHG emissions by 35–41% in areas of low irradiance or reduce GHG emissions by 21–25% in areas with higher irradiance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Performance and Durability of Pure-Water-Fed Anion Exchange Membrane Electrolyzers Using Baseline Materials and Operation

Water electrolysis powered by renewable electricity produces green hydrogen and oxygen gas, which can be used for energy, fertilizer, and industrial applications and thus displace fossil fuels. Pure-water anion-exchange-membrane (AEM) electrolyzers in principle offer the advantages of commercialized proton-exchange-membrane systems (high current density, low cross over, output gas compression, etc.) while enabling the use of less-expensive steel components and nonprecious metal catalysts. AEM electrolyzer research and development, however, has been limited by the lack of broadly accessible materials that provide consistent cell performance, making it difficult to compare results across studies. Further, even when the same materials are used, different pretreatments and electrochemical analysis techniques can produce different results. Here, we report an AEM electrolyzer comprising commercially available catalysts, membrane, ionomer, and gas-diffusion layers operating near 1.9 V at 1 A cm –2 in pure water. After the initial break in, the performance degraded by 0.67 mV h –1 at 0.5 A cm –2 at 55 °C. We detail the key preparation, assembly, and operation techniques employed and show further performance improvements using advanced materials as a proof-of-concept for future AEM-electrolyzer development. Here, the data thus provide an easily reproducible and comparatively high-performance baseline that can be used by other laboratories to calibrate the performance of improved cell components, nonprecious metal oxygen evolution, and hydrogen evolution catalysts and learn how to mitigate degradation pathways.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Scalable Gas Diffusion Electrode Fabrication for Electrochemical CO 2 Reduction Using Physical Vapor Deposition Methods

Electrochemical CO 2 reduction (ECR) promises the replacement of fossil fuels as the source of feedstock chemicals and seasonal storage of renewable energy. While much progress has been made in catalyst development and electrochemical reactor design, few studies have addressed the effect of catalyst integration on device performance. Using a microfluidic gas diffusion electrolyzer, we systematically studied the effect of thickness and the morphology of electron beam (EB) and magnetron-sputtered (MS) Cu catalyst coatings on ECR performance. We observed that EB-Cu outperforms MS-Cu in current density, selectivity, and energy efficiency, with 400 nm thick catalyst coatings performing the best. Additionally, the superior performance of EB-Cu catalysts is assigned to their faceted surface morphology and sharper Cu/gas diffusion layer interface, which increases their hydrophobicity. Tests in a large-scale zero-gap electrolyzer yielded similar product selectivity distributions with an ethylene Faradaic efficiency of 39% at 200 mA/cm 2 , demonstrating the scalability for industrial ECR applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Chemical Feedback in the Self-Assembly and Function of Air–Liquid Interfaces: Insight into the Bottlenecks of CO 2 Direct Air Capture

As fossil fuels remain a major source of energy throughout the world, developing efficient negative emission technologies, such as direct air capture (DAC), which remove carbon dioxide (CO 2 ) from the air, becomes critical for mitigating climate change. Although all DAC processes involve CO 2 transport from air into a sorbent/solvent, through an air–solid or air–liquid interface, the fundamental roles the interfaces play in DAC remain poorly understood. In this work, we study the interfacial behavior of amino acid (AA) solvents used in DAC through a combination of vibrational sum frequency generation spectroscopy and molecular dynamics simulations. This study revealed that the absorption of atmospheric CO 2 has antagonistic effects on subsequent capture events that are driven by changes in bulk pH and specific ion effects that feedback on surface organization and interactions. Among the three AAs (leucine, valine, and phenylalanine) studied, we identify and separate behaviors from CO 2 loading, chemical changes, variations in pH, and specific ion effects that tune structural and chemical degrees of freedom at the air–aqueous interface. The fundamental mechanistic findings described here are anticipated to enable new approaches to DAC based on exploiting interfaces as a tool to address climate change.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Novel Structural Motif To Promote Mg-Ion Mobility: Investigating ABO 4 Zircons as Magnesium Intercalation Cathodes

There is an increasing need for sustainable energy storage solutions as fossil fuels are replaced by renewable energy sources. Multivalent batteries, specifically Mg batteries, are one energy storage technology that researchers continue to develop with hopes to surpass the performance of Li-ion batteries. However, the limited energy density and transport properties of Mg cathodes remain critical challenges preventing the realization of high-performance multivalent batteries. In this work, ABO 4 zircon materials (A = Y, Eu and B = V, Cr) are computationally and experimentally evaluated as Mg intercalation cathodes. Remarkably good Mg-ion transport properties were predicted and Mg-ion intercalation was experimentally verified in sol-gel synthesized zircon YVO 4 , EuVO 4 , and EuCrO 4 . Among them, EuVO 4 exhibited the best electrochemical performance and demonstrated repeated reversible cycling. While we believe that the one-dimensional diffusion channels and redox-active species tetragonal coordination limit the value of many zircons as high-performance cathodes, their unique structural motif of overlapping polyhedra along the diffusion pathway appears instrumental for promoting good Mg-ion mobility. The motif results in a favorable "6-5-4" change in coordination that avoids unfavorable sites with lower coordination along the diffusion pathway and a structural design metric for future Mg cathode development.

25 ENERGY STORAGE↗
DOE OSTI2023

Effects of the Hydrophobic Block Length Ratio of Poly(vinylbenzyl N -methylpiperidinium carbonate)- b -polyethylene- b -poly(vinylbenzyl N -methylpiperidinium carbonate) Block Copolymers for Anion Exchange Membrane Electrolysis

Electrolysis of water to produce hydrogen from renewable electricity is an extremely attractive strategy to reduce energy dependence on fossil fuels. Development of membrane and ionomer materials that maintain high performance with long lifetimes is needed. We developed and investigated the performance and durability of a series of polyethylene-based ABA triblock copolymer anion exchange ionomer and membrane (AEI, AEM) materials for anion exchange membrane water electrolysis. Poly(vinylbenzyl N-methylpiperidinium carbonate)-b-polyethylene-b-poly(vinylbenzyl N-methylpiperidinium carbonate) was synthesized with different hydrophobic/hydrophilic block ratios (1.02:1, 2.58:1, and 4.46:1) resulting in a range of ion exchange capacities (1.1–1.8 meq g –1 ) and water swelling (23–154%) characteristics. All AEMs showed full anionic dissociation, as evidenced by linear Arrhenius correlations, and excellent carbonate conductivity of 8–94 mS cm –1 at 50 °C. Hydrophilic phase separation may offer superior chemical durability by only wetting the ion-conducting region of the polymer and avoiding attack at the nonwetted backbone. We evaluated the performance and durability of these AEMs as a function of hydrophobic polyethylene (PE) content. The AEM containing the least amount of PE displayed the highest performance of 1 A cm –2 at 2.3 V but degraded at 40 mV h –1 before catastrophically failing after <3 h at 0.5 A cm –2 . With greater PE-containing AEMs, the degradation rate was reduced by 3 orders of magnitude with only a 0.2 V increase in voltage. Constant current electrolysis for 50 h resulted in a voltage change of 0.3 mV h –1 in a single-cell water electrolyzer and 1 M potassium carbonate. In a 600 h test, the voltage change in the final 200 h was impressively low for an experimental film, 58 μV h –1 . Postmortem analysis indicated that the membrane did not thin and that water becomes more tightly hydrogen-bound in the polymer after electrolysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Effects of PLA/PHB Blend Ratio and Wood Flour Loading on the Melt Rheology and Thermomechanical Properties of Biobased Polymer Composites

The development of sustainable, biobased polymer composites is crucial for reducing supply chain dependence on fossil fuels. A major challenge lies in understanding and predicting the processability of these sustainable material alternatives, which directly impacts large-scale manufacturing. Here, this study systematically investigates the effect of poly(lactic acid) (PLA)/polyhydroxybutyrate (PHB) blend ratios and wood flour (WF) loadings on the thermal, rheological, and mechanical properties of the composites. Composites were prepared via melt compounding and characterized by using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), oscillatory shear melt rheology, tensile testing, and scanning electron microscopy. Results showed that increasing the PHB content lowered the glass transition temperature, while higher PHB and WF loadings decreased thermal stability. Complex viscosity decreased with increasing PHB in 0 and 10% WF, whereas it increased in 20% and 30% WF for PHB-rich blends (80/20 and 70/30 PLA/PHB) due to stronger filler interactions with flexible PHB chains. At 30% WF, PHB-containing composites also showed elastic dominance with G′ higher than G″. This behavior was confirmed by van Gurp–Palmen plots, where the phase angle decreased with increasing PHB and WF loadings. WF addition also shifted Cole–Cole plots away from semicircular terminal relaxation, while time–temperature superposition validity was maintained, confirming that polymer chain dynamics continue to dominate melt behavior. Young’s modulus increased with WF loading, while tensile strength and toughness decreased due to weaker interfacial adhesion between the matrix and the filler. Interestingly, 10% WF systems containing PHB exhibited the highest toughness among all of the filled systems, indicating synergistic reinforcement from WF fillers and PHB-induced ductility. Overall, melt rheology effectively captured the internal structure and stiffness of the composites as the formulation changed, reinforcing the concept that the PLA/PHB ratio and WF content can be tuned to adjust melt elasticity and balance mechanical property trade-offs for targeted applications.

melt rheology↗
DOE OSTI2020

(Photo)Electrocatalytic CO 2 Reduction at the Defective Anatase TiO 2 (101) Surface

Excessive carbon dioxide (CO 2 ) emissions by combustion of fossil fuels are linked to global warming and rapid climate change. One promising route to lowering the concentration of CO 2 in the atmosphere is to reduce it to useful small molecules via photoelectrocatalytic hydrogenation, which would enable solar energy storage with a zero-carbon emission cycle and perform a more efficient separation of the photogenerated electron and hole pair than pure photocatalysis. Indeed, photoelectrocatalytic CO 2 reduction has been an intense focus of research. Using the density functional theory (DFT), we studied the CO 2 reduction reaction on the defective anatase TiO 2 (101) surface, at both the solvent/catalyst and the electrolyte/catalyst interfaces. The analysis of the electronic structure of the surface shows a contrast between the solvent/catalyst and the electrolyte/catalyst interfaces, which results in the two corresponding catalytic cycles being distinct. Furthermore, our study explains at the electronic and mechanistic levels why methanol is the main product in the presence of the electrolyte and why the overpotential is not only controlled by the reaction process but also by the diffusion process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Catalyst Deactivation and Its Mitigation during Catalytic Conversions of Biomass

Biofuel or biochemical production from biomass, especially lignocellulosic biomass, is the most promising option to replace fossil-based products to achieve sustainability. However, biomass is currently under-utilized because biomass conversion technologies have faced significant challenges to compete with incumbent petroleum technologies. Advancement in catalysis plays a central role in increasing the readiness of biomass conversion technologies. In this respect, improving catalyst stability is one of the well-known grand challenges for biomass conversion catalysis, which impedes the scaling up and commercialization of many biomass conversion techniques. In comparison to conventional processing of fossil fuels (petroleum, coal, and natural gas), biomass conversion is largely challenged by three unique properties of biomass-derived feedstocks—high water and oxygen content, high degree and reactivity of oxygen functionalization, and high contamination by minerals and heteroatoms—which all cause greater catalyst deactivation in different ways. Therefore, research on catalyst deactivation mitigation and catalyst regeneration is extremely important for the development of biomass conversion technologies. This review aims to highlight studies on catalyst deactivation and mitigation for catalytic processes in biomass conversion, with emphasis on the deactivation caused by the three unique characteristics of biomass-derived feedstocks. Further, this work will provide information on correlating the characteristics of biomass-derived streams, their potential impact on catalyst lifetime, and a potential mitigation approach, which could guide a more rational design of a robust catalyst and processes for biomass conversion.

09 BIOMASS FUELS↗
DOE OSTI2025

Enhanced Electrocatalytic and Selective CO 2 -to-CO Reduction by a Rhenium(I) Complex Bearing 6,6′-Substituted 2,2′-Bipyridines

The electrochemical reduction of CO 2 (CO 2 RR) into value-added chemicals offers a promising route toward a circular carbon economy and reduced reliance on fossil fuels. A detailed understanding of the structural and electronic factors governing the performance of molecular CO 2 RR electrocatalysts is essential for the design of efficient, tunable systems. Here, in this study, we report a series of rhenium(I) complexes, fac-[Re I (6,6′-(R) 2 -bpy)(CO) 3 Cl] (bpy = 2,2′-bipyridine; R = mesityl (mes), 2,4,6-triisopropylphenyl (trip), or isophthalic acid (phth)) and evaluate their electrocatalytic activity. Among these, fac-[Re I (6,6′-(mes) 2 -bpy)(CO) 3 Cl] exhibited the highest performance, enabling selective CO 2 -to-CO conversion for 1 hour with Faradaic efficiency (FE) > 97%, representing an unprecedented activity level for a Re-bpy catalysts. Single-crystal X-ray diffraction and density functional theory (DFT) calculations indicated that favorable CO 2 binding could be promoted by the tilting of the 6,6′-(mes)2-bpy ligand (from the Re-CO coordination plane), providing mechanistic insight into the observed enhancement. The study consequently demonstrates a rational correlation between the CO 2 electrocatalytic performance of Re-bpy catalysts and their structural variations, as derived from X-ray data and corroborated by computational modeling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Simultaneous Activation of CH4 and CO2 for Concerted C-C Coupling at the Oxide-Oxide Interfaces

Catalytic conversion of CO2 and CH4 to value-added platform chemicals via the direct C-C coupling provides one of the most effective routes that not only address global climate change but also alleviate the dependency on traditional fossil fuels. Herein, three oxide-on-oxide catalysts that can realize direct C-C coupling on the basis of simultaneous activation of CH4 and CO2 were investigated using density functional theory (DFT) calculations. With the formation of oxide-on-oxide interfacial sites between the substrate (In2O3) and dispersed oxides ((ZnO)3, (ZrO2)3, or Ga2O3), it is found that CO2 can be activated at the defective site of In2O3 while the C-H bond of CH4 can be simultaneously activated at the M-O pair of the supported metal oxide. In contrast to the Eley-Rideal mechanism that C-C coupling of CO2 and CH3 stabilized on Zn-doped ceria follows, the formation of a Zn-C-C-O transition state at the active centers originates from a Langmuir-Hinshelwood mechanism where the activated CO2 also enhances the dissociative adsorption of CH4. There is a linear relationship between the C-C coupling reaction energy/activation barrier and CH4 dissociation energy. The results indicate that dissociative adsorption of CH4 plays a dominant role in the direct C-C coupling, whereas the adsorption/activation of CO2 is less significant. DFT calculation results of CH4 and CO2 to acetic acid on the (ZnO)3/In2O3 catalyst surface indicates that the C-C coupling step is the kinetically most relevant step. Compared with Ga2O3/In2O3 and (ZrO2)3/In2O3 catalyst surfaces, (ZnO)3/In2O3(110) is more active for the acetic acid formation. The present work provides new mechanistic insights into the direct C-C coupling of CH4 and CO2, which would be useful to design more efficient catalyst.

CH4 activation, C-C coupling, supported oxides, In↗