SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The design, analysis, fabrication and testing of a Kevlar-49/HBRF-55A filament wound chamber is reported. The chamber was fabricated and successfully tested to 80% of the design burst pressure. Results of the data reduction and analysis from the hydrotest indicate that the chamber design and fabrication techniques used for the chamber were adequate and the chamber should perform adequately in a static test.
A review of recent advances is presented for lightweight, high performance composite pressure vessel technology that covers the areas of design concepts, fabrication procedures, applications, and performance of vessels subjected to single cycle burst and cyclic fatigue loading. Filament wound fiber/epoxy composite vessels were made from S glass, graphite, and Kevlar 49 fibers and were equipped with both structural and nonstructural liners. Pressure vessels structural efficiencies were attained which represented weight savings, using different liners, of 40 to 60 percent over all titanium pressure vessels. Significant findings in each area are summarized.
A Lagrangian vorticity method for numerical simulation of three-dimensional separated flows with vortex filaments, about solid bodies, is discussed. The method is an extension of an earlier one for three-dimensional rotational flows away from solid boundaries e.g., jets, vortex rings, and aircraft trailing vortices after initial rollup. In this method an harmonic contribution to the velocity field is computed at each time step to ensure tangency of the velocity field at the boundary. The mechanics of the boundary layer are approximated with sufficient accuracy so that the separation lines are located correctly on the surface of the body.
The design and fabrication of twelve NASA-QCSEE type composite fan blades utilizing wet filament winding fabrication techniques is described. All composite fibers were continuous and attached to the root end. All components were formed, bonded, and co-cured in one molding process. Advanced fiber materials used in the blade fabrication were Thornel-300, Carbolon Z-2-1, and Carbolon Z-3 graphite in an epoxy resin matrix.
The fabrication and impact tests of graphite/epoxy filament wound fan blades are discussed. Blades which were spin tested at tip speeds up to 305 meters per second retained their structural integrity. Two blades were each impacted with a 454 gram slice of a 908 gram simulated bird at a tip speed of 263 meters per second and impact angles of 22 and 32 deg. The impact tests were recorded with high-speed movie film. The blade which was impacted at 22 deg sustained some root delamination but remained intact. The 32 deg impact separated the blade from the root. No local damage other than leading edge debonding was observed for either blade. Results of a failure mode analysis are also discussed.
A review of recent advances is presented for lightweight, high-performance composite pressure vessel technology that covers the areas of design concepts, fabrication procedures, applications, and performance of vessels subjected to single-cycle burst and cyclic fatigue loading. Filament-wound fiber/epoxy composite vessels were made from S-glass, graphite, and Kevlar 49 fibers and were equipped with both structural and nonstructural liners. Pressure vessel structural efficiencies were attained which represented weight savings, using different liners, of 40 to 60 percent over all-titanium pressure vessels. Significant findings in each area are summarized including data from current NASA-Lewis Research Center contractual and in-house programs.
With the development of a large magnetized plasma source it has become possible to investigate space plasma physics problems in the laboratory. First, the nonlinear effects associated with the excitation of a large amplitude whistler wave have been explored. It is found that the radiation pressure of the wave and thermal effects give rise to a field-aligned density depression in which the wave becomes completely trapped. Hyperfine filaments with diameters small compared with the parallel wavelength are observed. Second, the stability of oblique whistler waves in the presence of an electron beam has been studied. A broadband whistler instability is observed and identified as a Cherenkov interaction between beam electrons and whistlers propagating near the resonance cone. These observations confirm the present model for the generation of VLF hiss in the aurora.
The fabrication and impact tests of graphite/epoxy filament wound fan blades are discussed. Blades which were spin tested at tip speeds up to 305 m/sec retained their structural integrity. Two blades were each impacted with a 454-g slice of a 908-g simulated bird at a tip speed of 263 deg and impact angles of 22 deg and 32 deg. The impact tests were recorded with high-speed movie film. The blade which was impacted at 22 deg sustained some root delamination but remained intact. The 32 deg impact separated the blade from the root. No local damage other than leading-edge debonding was observed for either blade. The results of a failure mode analysis are also discussed.
A simplified model of an electromagnetic filamentation instability that arises when two counterstreaming electron beams pass through a uniform ion background is treated by statistical mechanical techniques borrowed from fluid turbulence theory. Accumulation of magnetic energy at long wavelengths is predicted, as observed in the numerical simulations of Lee and Lampe.
The use of epoxy resin fiber glass and economic factors affecting the choice of materials for gas storage are discussed. The physical nature of the filament windings are described together with the results obtained. It is demonstrated that a substantial reduction in mass and an enhanced level of safety can be assured at a competitive cost by storing gases in this way.
A system of optical filaments has been discovered surrounding the central galaxy in the X-ray cluster A496. This suggests that the intracluster gas in A496 is cooling and being accreted by that galaxy. Observations of the X-ray surface brightness and spectrum support this interpretation.
A vortex filament-vortex core method for predicting aerodynamic characteristics of slender wings with edge vortex separation was developed. Semi-empirical but simple methods were used to determine the initial positions of the free sheet and vortex core. Comparison with available data indicates that: (1) the present method is generally accurate in predicting the lift and induced drag coefficients but the predicted pitching moment is too positive; (2) the spanwise lifting pressure distributions estimated by the one vortex core solution of the present method are significantly better than the results of Mehrotra's method relative to the pressure peak values for the flat delta; (3) the two vortex core system applied to the double delta and strake wings produce overall aerodynamic characteristics which have good agreement with data except for the pitching moment; and (4) the computer time for the present method is about two thirds of that of Mehrotra's method.
The static and cyclic load behavior of transverse filament tape (TFT) fiberglass/epoxy and TFY fiberglass/polyester composites, intended for use in the design of low-cost wind turbine blades, are presented. The data behavior is also evaluated with respect to predicted properties based on an integrated hygrothermomechanical response theory. Experimental TFT composite data were developed by the testing of laminates made by using composite layups typical of those used for the fabrication of TFT fiberglass wind turbine blades. Static properties include tension, compression, and interlaminar shear strengths at ambient conditions and at high humidity/elevated temperature conditions after a 500 hour exposure. Cyclic fatigue data were obtained using similar environmental conditions and a range of cyclic stresses. The environmental (temperature and moisture) and cyclic load effects on composite strength degradation are subsequently compared with the predictions obtained by using the composite life/durability theory. The results obtained show that the predicted hygrothermomechanical environmental effects on TFT composites are in good agreement with measured data for various properties including fatigue at different cyclic stresses.
Results obtained using a vortex filament model, as opposed to sheets are discussed, against using various modeling techniques and including the computer codings.
An exact analytical solution for the velocity field, both interior and exterior, induced by an infinite right-handed helical vortex filament is derived. Due to the way the variables combine in this solution, the paper also shows that it is possible to derive a stream function for this nonaxisymmetric flow. Sample calculations of these expressions are included.
The thermal and tearing instabilities are believed to be the two primary temperature modification mechanisms in sheared astrophysical magnetic fields. The former gives rise to the formation of cool filaments and the latter to the release of magnetic energy. It has long been known that these processes are interrelated, most conspicuously in the case of the solar corona where prominences often precede flares within the same magnetic structure. It is also clear, from first principles, that the energy transport underlying the thermal instability should have a strong effect on the resistivity which facilitates magnetic tearing, and that the energy release of the latter should affect the temperature drop of the former. This paper describes some results of the first calculations which attempt to unify the dynamic treatment of these two coexisting instabilities. Growth rates as a function of resistivity, and examples of the primary mode structures are provided, along with a discussion of some critical aspects of the interaction of these two astrophysical energy flux mechanisms.
Damaged panels do not fail catastrophically when fabricated this way. Isogrid stiffener formed in slotted silicon-rubber tool. At grid intersections, slots offset to prevent excessive buildup of composite material and widened to give room for overlapping filaments to spread when compressed. Following total failure of skin, isogrid stiffener still carries 350 kN/m (2,000 1b/in.) and remains intact.
Contamination reduced in modified growth system. In Silicon-ribbongrowth apparatus, capillary filament guides are integral parts of crucible, extending from bottom to top of melt. Addition of guides expected to result in better thermal control of growth process and higher silicon purity.