Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FEDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Active Mixing of Reactive Materials for 3D Printing

The mixing of materials during additive manufacturing is a major benefit which allows one to compositionally and spatially tailor material properties, for example to locally control the reactivity in fuel–oxidizer systems known as thermites. This work characterizes an active mixing printhead used in conjunction with a 3D printing process known as Direct Ink Writing. Besides compositional control, a major benefit of this approach is that it offers a safe method for working with these materials, which can otherwise be hazardous once mixed. Custom fuel and oxidizer inks are fed at fixed volumetric rates into an active mixing printhead, and both the rotational speed of the mixing impeller as well as the fuel–oxidizer ratio are varied. Upon ignition, the propagation speed increases with the rotational speed of the mixer and plateaus above a critical value of ≈750 rpm. The critical mixing speed is corroborated by computational fluid simulations and an analytical expression that considers the inks’ complex fluid behavior. Additionally, varying the composition results in a wide range of propagation speeds with peak reactivity corresponding to a fuel–rich formulation ( Φ = 1.5). As a result, a test article incorporating a fast– and slow–burning region demonstrates how spatial composition can manipulate the reactivity.

3D printing↗

Microstructure–Property Correlation in a Laser Powder Bed Fusion Processed High-Strength AF-9628 Steel

Laser powder bed fusion additive manufacturing (LPBF-AM) of a low-alloy, high-performance AF-9628 steel results in exceptionally high strength and good ductility. The reasons for such mechanical properties are investigated through detailed microscopy performed at several length scales. Thus, the characterization of melt pool, porosity, grain morphology, phases, and dislocations is performed in the as-printed material. The as-printed material consists of only 0.004 vol% of uniformly distributed porosity, single-phase martensitic laths with an average lath size of ≈2.5 μm, the absence of carbides indicating interstitial trapping of C atom, and high dislocation density in the martensitic laths. Experimental data through microscopy are then fed in analytical models for calculating strengthening contributions from various strengthening mechanisms. Calculated yield strength agrees well with experimentally determined value, and therefore, activation of various strengthening mechanisms is established in as-printed AF-9628.

36 MATERIALS SCIENCE↗

Exploring the Structural, Dynamic, and Functional Properties of Metal–Organic Frameworks through Molecular Modeling

This review spotlights the role of atomic-level modeling in research on metal-organic frameworks (MOFs), especially the key methodologies of density functional theory (DFT), Monte Carlo (MC) simulations, and molecular dynamics (MD) simulations. The discussion focuses on how periodic and cluster-based DFT calculations can provide novel insights into MOF properties, with a focus on predicting structural transformations, understanding thermodynamic properties and catalysis, and providing information or properties that are fed into classical simulations such as force field parameters or partial charges. Classical simulation methods, highlighting force field selection, databases of MOFs for high-throughput screening, and the synergistic nature of MC and MD simulations, are described. By predicting equilibrium thermodynamic and dynamic properties, these methods offer a wide perspective on MOF behavior and mechanisms. Additionally, the incorporation of machine learning (ML) techniques into quantum and classical simulations is discussed. These methods can enhance accuracy, expedite simulation setup, reduce computational costs, as well as predict key parameters, optimize geometries, and estimate MOF stability. By charting the growth and promise of computational research in the MOF field, the aim is to provide insights and recommendations to facilitate the incorporation of computational modeling more broadly into MOF research.

36 MATERIALS SCIENCE↗

Development and Characterization of 3D Printable Thermite Component Materials

Additive manufacturing (AM) has recently shown great promise as a means to tailor a wide range of material properties, both quasi-static and dynamic. An example of controlling the dynamic behavior is to tailor the chemical energy release rate in composite energetic materials such as thermites – which are a subset of pyrotechnics that use a metal fuel and a metal oxide as an oxidizer. Since these materials are most hazardous once finely mixed, the approach taken here is to formulate the fuel and oxidizer separately such that they can be mixed on-the-fly. The development, formulation, and characterization of two respective aqueous 3D printable inks consisting of Al and CuO are discussed. The rheological properties and ability of the material to span gaps are characterized. To demonstrate that the materials could be mixed and sustain a reaction, the inks are fed into a static mixing nozzle and extruded into a high-aspect ratio test strip. Upon drying, the material can be ignited and sustain a propagation through the part. These results present a facile, and safe, way to AM thermite which can be used for more detailed follow on studies looking at the role of architecture on the reactivity.

36 MATERIALS SCIENCE↗

Co‐Electrolysis of CO 2 and H 2 O to Syngas on Bimetallic Pd x Cu 1‐ x Catalysts for Tandem Thermochemical Conversion to Carbon Nanofibers

Electrification of chemical production using renewable energy and abundant feedstocks offers a promising pathway for decarbonizing the chemical industry. Current efforts on CO 2 valorization largely focus on making chemicals and fuels. Here, to help achieve net-negative emissions through long-term carbon storage, this study aims to develop efficient electrocatalysts for a tandem electrochemical-thermochemical process to convert CO 2 into carbon nanofibers (CNFs). CO 2 and water are first electrochemically reduced in a membrane electrode assembly (MEA) electrolyzer to produce syngas (CO + H 2 ), which is subsequently fed into a thermochemical packed bed reactor to facilitate CNF growth. This work systematically evaluated Pd x Cu 1-x bimetallic electrocatalysts to assess the effect of Pd–Cu alloying on enhancing syngas production while reducing Pd loading. Transmission electron microscopy and Raman spectroscopy confirmed the formation of high-purity, crystalline CNFs, regardless of the syngas composition from the MEA. In situ X-ray absorption spectroscopy and X-ray diffraction measurements revealed that increasing Cu content in the Pd x Cu 1-x alloy progressively inhibited palladium hydride formation, consistent with DFT calculations on the stability of Pd x Cu 1-x under reducing electrochemical potentials.

58 GEOSCIENCES↗

Steam-air blown bubbling fluidized bed biomass gasification (BFBBG): Multi-scale models and experimental validation

During fluidized bed biomass gasification, complex gas-solid mixing patterns and numerous chemical and physical phenomena make identification of optimal operating conditions challenging. In this work, a parametric experimental campaign was carried out alongside the development of a coupled reactor network model which successfully integrates the individually validated sub-models to predict steady-state reactor performance metrics and outputs. The experiments utilized an integrated gasification system consisting of an externally-heated, bench-scale, 4-in., 5 kWth, fluidized bed steam/air blown gasifier fed with woody biomass equipped with a molecular beam mass spectrometer to directly measure tar species. The operating temperature (750-850°C) and air/fuel equivalence ratio (ER = 0-0.157) were independently varied to isolate their effects. Elevating temperature is shown to improve the char gasification rate and reduce tar concentrations. In conclusion, air strongly impacts the composition of tar, accelerating the conversion of lighter polycyclic-aromatic hydrocarbons into soot precursors, while also improving the overall carbon conversion.

09 BIOMASS FUELS↗

A PRACTICAL ELECTRODIALYSIS MODEL FOR ACCELERATING SYSTEM DEVELOPMENT

Empirical optimization of electrodialysis (ED) is dependent on repetitive experiments with incremental adjustments, which is cost prohibitive at scale. While models can reduce the costs associated with optimization and scale-up, existing ED models are limited in application to specific use cases and tend to be developed for the exploration of specific transport phenomena. The field requires a practical system-level model, generalized for the broad range of ED systems. This work presents a modeling framework that enables rapid evaluation of membrane stack design, flow configuration, scale, and operational inputs. Across applications spanning 1 L to 5400 L; use of conventional and bipolar membranes; operation in continuous, batch and fed-batch modes; and feedstocks including seawater, brine, wastewater, and manure hydrolysate, the model achieves a mean R2 of 0.978 for concentration-time profiles and links design choices to techno-economic trade-offs, enabling cost-aware prioritization of system configurations.

Bipolar Membrane↗

Estradiol‐mediated regulation of hepatic iNOS in obese rats: Impact of Src, ERK1/2, AMPKα, and miR‐221

Purpose: This study aimed to investigate in vivo effects of estradiol on the regulation of hepatic inducible nitric oxide synthase (iNOS) expression in the high fat (HF) diet-induced obesity. Also, we aimed to investigate whether activation of the extracellular signal-regulated kinase (ERK1/2), adenosine monophosphate-activated protein kinase (AMPK), Src kinase, and miR-221 is involved in estradiol-mediated regulation of iNOS in the liver of obese male Wistar rats. Male Wistar rats were fed a standard laboratory diet or a HF diet for 10 weeks. Half of HF rats were treated with estradiol intraperitoneally (40 μg/kg), whereas the other half were placebo-treated 24 H before euthanasia. Results show that estradiol treatment of HF rats decreased hepatic iNOS mRNA (P < 0.05) and protein expression (P < 0.01), the protein levels of p65 subunit of nuclear factor κB (P < 0.05) and ERα (P < 0.05), ERK1/2 phosphorylation (P < 0.001), and ERα/Src kinase association (P < 0.05). By contrast, hepatic Src protein level (P < 0.05), AMPKα phosphorylation (P < 0.05), and miR-221 expression (P < 0.05) were increased in HF rats after estradiol treatment. Our results indicate that estradiol in vivo regulates hepatic iNOS expression in obese rats via molecular mechanisms involving ERK1/2, AMPK, Src, and miR-221 signaling. © 2018 International Union of Biochemistry and Molecular Biology, Inc.

60 APPLIED LIFE SCIENCES↗

EISA (Energy Independence and Security Act) compliant ethanol fuel from corn stover in a depot-based decentralized system

Cellulosic biofuels face significant problems of feedstock aggregation and logistics leading to poor economies of scale. The current model is based on relatively small biorefineries using locally-gathered feedstocks. Here, we examine the potential capacity of a hypothetically distributed, depot-based, biorefinery system to produce cellulosic ethanol from corn stover in the United States Midwest. The local depots serve to aggregate, pretreat and densify biomass (via pellets), which are collected, transported, and fed to a few very large, cellulosic ethanol biorefineries. We found that a corn stover-based depot system would help establish one or two very large-scale biorefineries capable of processing about 8-12% of total corn stover available in the United States Midwest. About 55-153 depots could supply the pretreated pellets to each distributed biorefinery leading to an annual production of 1.02 - 2.91 billion liters of cellulosic ethanol. Most of the participating depots would be located in Illinois and Iowa. The ethanol selling price in this depot-based biorefinery system would varys between U$S 0.67 and U$S 0.72 liter-1. The estimated range of GHG savings from cellulosic ethanol in the depot system compared to gasoline was 3.35-4.84 Tg CO2 year-1. In addition of being economically competitive, a distributed, depot-based, biorefinery system could meet the 60% GHG reduction requirement of the U.S. Energy Independence and Security Act (EISA).

Biorefinery, Cellulosic biofuel, Corn stover, Dist↗

L–malic acid production from xylose by engineered Saccharomyces cerevisiae

L-malic acid is widely used in the food, chemical, and pharmaceutical industries. Here, we report on production of malic acid from xylose, the second most abundant sugar in lignocellulosic hydrolysates, by engineered Saccharomyces cerevisiae. To enable malic acid production in a xylose-assimilating S. cerevisiae, we overexpressed PYC1 and PYC2, coding for pyruvate carboxylases, a truncated MDH3 coding for malate dehydrogenase, and SpMAE1, coding for a Schizosaccharomyces pombe malate transporter. Additionally, both the ethanol and glycerol-producing pathways were blocked to enhance malic acid production. The resulting strain produced malic acid from both glucose and xylose, but it produced much higher titers of malic acid from xylose than glucose. Interestingly, the engineered strain had higher malic acid yield from lower concentrations (10 g L –1 ) of xylose, with no ethanol production, than from higher xylose concentrations (20 and 40 g L –1 ). As such, a fed-batch culture maintaining xylose concentrations at low levels was conducted and 61.2 g L –1 of malic acid was produced, with a productivity of 0.32 g L –1 h. Furthermore, these results represent successful engineering of S. cerevisiae for the production of malic acid from xylose, confirming that that xylose offers the efficient production of various biofuels and chemicals by engineered S. cerevisiae.

59 BASIC BIOLOGICAL SCIENCES↗

Enzyme selection, optimization, and production toward biodegradation of post–consumer poly(ethylene terephthalate) at scale

Poly(ethylene terephthalate) (PET) is one of the world's most widely used polyester plastics. Due to its chemical stability, PET is extremely difficult to hydrolyze in a natural environment. Recent discoveries in new polyester hydrolases and breakthroughs in enzyme engineering strategies have inspired enormous research on biorecycling of PET. This study summarizes our research efforts toward large-scale, efficient, and economical biodegradation of post-consumer waste PET, including PET hydrolase selection and optimization, high-yield enzyme production, and high-capacity enzymatic degradation of post-consumer waste PET. First, genes encoding PETase and MHETase from Ideonella sakaiensis and the ICCG variant of leaf-branch compost cutinase (LCC ICCG ) were codon-optimized and expressed in Escherichia coli BL21(DE3) for high-yield production. To further lower the enzyme production cost, a pelB leader sequence was fused to LCC ICCG so that the enzyme can be secreted into the medium to facilitate recovery. To help bind the enzyme on the hydrophobic surface of PET, a substrate-binding module in a polyhydroxyalkanoate depolymerase from Alcaligenes faecalis (PBM) was fused to the C-terminus of LCC ICCG . The resulting four different LCC ICCG variants (LCC, PelB-LCC, LCC-PBM, and PelB-LCC-PBM), together with PETase and MHETase, were compared for PET degradation efficiency. A fed-batch fermentation process was developed to produce the target enzymes up to 1.2 g L –1 . Finally, the best enzyme, PelB-LCC, was selected and used for the efficient degradation of 200 g L –1 recycled PET in a well-controlled, stirred-tank reactor. Furthermore, the results will help develop an economical and scalable biorecycling process toward a circular PET economy.

59 BASIC BIOLOGICAL SCIENCES↗

Permeable Reactive Biobarriers for In Situ Cr(VI) Reduction: Bench Scale Tests Using Cellulomonas sp. Strain ES6

Chromate (Cr(VI)) reduction studies were performed in bench scale flow columns using the fermentative subsurface isolate Cellulomonas sp. strain ES6. In these tests, columns packed with either quartz sand or hydrous ferric oxide (HFO)-coated quartz sand, were inoculated with strain ES6 and fed nutrients to stimulate growth before nutrient-free Cr(VI) solutions were injected. Results show that in columns containing quartz sand, a continuous inflow of 2 mg/L Cr(VI) was reduced to below detection limits in the effluent for durations of up to 5.7 residence times after nutrient injection was discontinued proving the ability of strain ES6 to reduce chromate in the absence of an external electron donor. In the HFO-containing columns, Cr(VI) reduction was significantly prolonged and effluent Cr(VI) concentrations remained below detectable levels for periods of up to 66 residence times after nutrient injection was discontinued. Fe was detected in the effluent of the HFO-containing columns throughout the period of Cr(VI) removal indicating that the insoluble Fe(III) bearing solids were being continuously reduced to form soluble Fe(II) resulting in prolonged abiotic Cr(VI) reduction. Thus, growth of Cellulomonas within the soil columns resulted in formation of permeable reactive barriers that could reduce Cr(VI) and Fe(III) for extended periods even in the absence of external electron donors. Other bioremediation systems employing Fe(II)-mediated reactions require a continuous presence of external nutrients to regenerate Fe(II). After depletion of nutrients, contaminant removal within these systems occurs by reaction with surface-associated Fe(II) that can rapidly become inaccessible due to formation of crystalline Fe-minerals or other precipitates. The ability of fermentative organisms like Cellulomonas to reduce metals without continuous nutrient supply in the subsurface offers a viable and economical alternative technology for in situ remediation of Cr(VI)-contaminated groundwater through formation of permeable reactive biobarriers (PRBB).

54 ENVIRONMENTAL SCIENCES↗

Metabolic process engineering of Clostridium tyrobutyricum Δ ack – adhE2 for enhanced n‐butanol production from glucose: Effects of methyl viologen on NADH availability, flux distribution, and fermentation kinetics

ABSTRACT Butanol biosynthesis through aldehyde/alcohol dehydrogenase ( adhE2 ) is usually limited by NADH availability, resulting in low butanol titer, yield, and productivity. To alleviate this limitation and improve n‐butanol production by Clostridium tyrobutyricum Δ ack – adhE2 overexpressing adhE2 , the NADH availability was increased by using methyl viologen (MV) as an artificial electron carrier to divert electrons from ferredoxin normally used for H 2 production. In the batch fermentation with the addition of 500 μM MV, H 2 , acetate, and butyrate production was reduced by more than 80–90%, while butanol production increased more than 40% to 14.5 g/L. Metabolic flux analysis revealed that butanol production increased in the fermentation with MV because of increased NADH availability as a result of reduced H 2 production. Furthermore, continuous butanol production of ∼55 g/L with a high yield of ∼0.33 g/g glucose and extremely low ethanol, acetate, and butyrate production was obtained in fed‐batch fermentation with gas stripping for in situ butanol recovery. This study demonstrated a stable and reliable process for high‐yield and high‐titer n‐butanol production by metabolically engineered C. tyrobutyricum by applying MV as an electron carrier to increase butanol biosynthesis. Biotechnol. Bioeng. 2015;112: 705–715. © 2014 Wiley Periodicals, Inc.

Du, Yinming↗

Triterpene hydrocarbon production engineered into a metabolically versatile host— Rhodobacter capsulatus

ABSTRACT Triterpene hydrocarbon biosynthesis of the ancient algae Botryococcus braunii was installed into Rhodobacter capsulatus to explore the production of C 30 hydrocarbon in a host capable of diverse growth habits—utilizing carbohydrate, sunlight or hydrogen (with CO 2 fixation) as alternative energy feedstocks. Engineering an enhanced MEP pathway was also used to augment triterpene accumulation. Despite dramatically different sources of carbon and reducing power, nearly the same level of botryococcene or squalene (∼5 mg oil/g‐dry‐weight [gDW]) was achieved in small‐scale aerobic heterotrophic, anaerobic photoheterotrophic, and aerobic chemoautotrophic growth conditions. A glucose fed‐batch bioreactor reached 40 mg botryococcene/L (∼12 mg/gDW), while autotrophic bioreactor performance with CO 2 , H 2 , and O 2 reached 110 mg/L (16.7 mg/gDW) during batch and 60 mg/L (23 mg/gDW) during continuous operation at a dilution rate corresponding to about 10% of μ max . Batch and continuous autotrophic specific productivity was found to reach 0.5 and 0.32 mg triterpene/g DW/h, comparable to prior reports for terpene production driven by heterotrophic growth conditions. This demonstrates the feasibility of alternative feedstocks and trophic modes to provide comparable routes to biochemicals that do not rely on sugar. Biotechnol. Bioeng. 2015;112: 1523–1532. © 2015 Wiley Periodicals, Inc.

Khan, Nymul E.↗

Rapid metabolic analysis of Rhodococcus opacus PD630 via parallel 13 C‐metabolite fingerprinting

ABSTRACT For rapid analysis of microbial metabolisms, 13 C‐fingerprinting employs a set of tracers to generate unique labeling patterns in key amino acids that can highlight active pathways. In contrast to rigorous 13 C‐metabolic flux analysis ( 13 C‐MFA), this method aims to provide metabolic insights without expensive flux measurements. Using 13 C‐fingerprinting, we investigated the metabolic pathways in Rhodococcus opacus PD630, a promising biocatalyst for the conversion of lignocellulosic feedstocks into value‐added chemicals. Specifically, seven metabolic insights were gathered as follows: (1) glucose metabolism mainly via the Entner–Doudoroff (ED) pathway; (2) lack of glucose catabolite repression during phenol co‐utilization; (3) simultaneous operation of gluconeogenesis and the ED pathway for the co‐metabolism of glucose and phenol; (4) an active glyoxylate shunt in acetate‐fed culture; (5) high flux through anaplerotic pathways (e.g., malic enzyme and phosphoenolpyruvate carboxylase); (6) presence of alternative glycine synthesis pathway via glycine dehydrogenase; and (7) utilization of preferred exogenous amino acids (e.g., phenylalanine). Additionally, a 13 C‐fingerprinting kit was developed for studying the central metabolism of non‐model microbial species. This low‐cost kit can be used to characterize microbial metabolisms and facilitate the design‐build‐test‐learn cycle during the development of microbial cell factories. Biotechnol. Bioeng. 2016;113: 91–100. © 2015 Wiley Periodicals, Inc.

Hollinshead, Whitney D.↗

Synthesis of polyketides from low cost substrates by the thermotolerant yeast Kluyveromyces marxianus

Kluyveromyces marxianus is a promising nonconventional yeast for biobased chemical production due to its rapid growth rate, high TCA cycle flux, and tolerance to low pH and high temperature. Unlike Saccharomyces cerevisiae, K. marxianus grows on low-cost substrates to cell densities that equal or surpass densities in glucose, which can be beneficial for utilization of lignocellulosic biomass (xylose), biofuel production waste (glycerol), and whey (lactose). Additionally, we have evaluated K. marxianus for the synthesis of polyketides, using triacetic acid lactone (TAL) as the product. The 2-pyrone synthase (2-PS) was expressed on a CEN/ARS plasmid in three different strains, and the effects of temperature, carbon source, and cultivation strategy on TAL levels were determined. The highest titer was obtained in defined 1% xylose medium at 37°C, with substantial titers at 41 and 43°C. The introduction of a high-stability 2-PS mutant and a promoter substitution increased titer four-fold. 2-PS expression from a multi-copy pKD1-based plasmid improved TAL titers a further five-fold. Combining the best plasmid, promoter, and strain resulted in a TAL titer of 1.24 g/L and a yield of 0.0295 mol TAL/mol carbon for this otherwise unengineered strain in 3 ml tube culture. This is an excellent titer and yield (on xylose) before metabolic engineering or fed-batch culture relative to other hosts (on glucose), and demonstrates the promise of this rapidly growing and thermotolerant yeast species for polyketide production.

59 BASIC BIOLOGICAL SCIENCES↗

Xylose Assimilation Enhances Production of Isobutanol in Engineered Saccharomyces cerevisiae

Bioconversion of xylose—the second most abundant sugar in nature—into high–value fuels and chemicals by engineered Saccharomyces cerevisiae has been a long–term goal of the metabolic engineering community. Although most efforts have heavily focused on the production of ethanol by engineered S. cerevisiae , yields and productivities of ethanol produced from xylose have remained inferior as compared to ethanol produced from glucose. However, this entrenched focus on ethanol has concealed the fact that many aspects of xylose metabolism favor the production of non–ethanol products. Through reduced overall metabolic flux, a more respiratory nature of consumption, and evading glucose signaling pathways, the bioconversion of xylose can be more amenable to redirecting flux away from ethanol towards a desired target product. In this report, we show that coupling xylose consumption via the oxidoreductive pathway with a mitochondrially–targeted isobutanol biosynthesis pathway leads to enhanced product yields and titers as compared to cultures utilizing glucose or galactose as a carbon source. Through optimization of culture conditions, we achieve 2.6 g/L of isobutanol in fed–batch flask and bioreactor fermentations. Furthermore, these results suggest that there may be synergistic benefits of coupling xylose assimilation with the production of non–ethanol value–added products.

59 BASIC BIOLOGICAL SCIENCES↗

High–level β–carotene production from xylose by engineered Saccharomyces cerevisiae without overexpression of a truncated HMG1 (t HMG1 )

Beta-carotene is a natural pigment and health-promoting metabolite, and has been widely used in the nutraceutical, feed, and cosmetic industries. Here, we engineered a GRAS yeast Saccharomyces cerevisiae to produce beta-carotene from xylose, the sec- ond most abundant and inedible sugar component of lignocellulose biomass. Specifically, a beta-carotene biosynthetic pathway containing crtYB, crtI, and crtE from Xanthophyllomyces dendrorhous was introduced into a xylose-fermenting S. cerevisiae. Here, the resulting strain produced beta-carotene from xylose at a titer threefold higher than from glucose. Interestingly, overexpression of tHMG1, which has been reported as a critical genetic perturbation to enhance metabolic fluxes in the mevalonate pathway and beta-carotene production in yeast when glucose is used, did not further improve the production of beta-carotene from xylose. Through fermentation profiling, metabolites analysis, and transcriptional studies, we found the advantages of using xylose as a carbon source, instead of glucose, for beta-carotene production to be a more respiratory feature of xylose consumption, a larger cytosolic acetyl!CoA pool, and an upregulated expression level of rate-limiting genes in the beta-carotene!producing pathway, including ACS1 and HMG1. As a result, 772.8 mg/L of beta-carotene was ob- tained in a fed-batch bioreactor culture with xylose feeding. Considering the in- evitable large scale production of xylose when cellulosic biomass!based bioeconomy is implemented, our results suggest xylose utilization is a promising strategy for overproduction of carotenoids and other isoprenoids in engineered S. cerevisiae.

09 BIOMASS FUELS↗