Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Experimental Methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Supercritical Fluid Adsorption to Weakly Attractive Solids: Universal Scaling Laws

In this study, adsorption of light hydrocarbons (C1–C3) confined in the pores of silica aerogel (nominal density 0.2 g/cm 3 ) was studied experimentally and by computer simulation. Five isotherms of ethane (25.0, 32.0, 32.3, 33.0, and 35.0 °C) were obtained over a temperature range including the critical temperature of the bulk fluid (T c = 32.18 °C) to ~220 bar by the vibrating tube densimetry (VTD) method, which yields unique information impossible to obtain by excess sorption measurements. Two isotherms (35 and 50 °C) of methane adsorption in SiO 2 aerogel were measured far above its critical temperature, T c = -82.59 °C, at 0–150 bar using a gravimetric method. The experimental pore fluid properties of methane, ethane, propane, and CO 2 (obtained earlier by VTD for the same SiO 2 aerogel sample) show behavior conforming to the principle of corresponding states over the entire covered reduced temperature ranges from T r = 0.976 to T r = 1.696. The magnitudes of the excess adsorption maxima and the reduced fluid densities where the maxima occur for C1–C3 hydrocarbons and CO 2 are similar functions of the reduced temperature. This behavior indicates that, at least under the conditions covered in this work, the differences in molecular size and shape have only minor impacts on the solid–fluid interactions underlying the adsorption behavior. Lastly, these findings are supported by large-scale GCMC simulations of a lattice gas confined in the pores of a computer representation of the SiO 2 aerogel framework, yielding excess adsorption isotherms in good agreement with experimental measurements, as well as the underlying microstructures of the adsorbed fluids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The interplay of excitonic delocalization and vibrational localization in optical lineshapes: A variational polaron approach

The dynamics of molecular excitonic systems are complicated by a competition between electronic coupling (which drives delocalization) and vibrational-electronic (vibronic) interactions (which tend to encourage electronic localization). A particular challenge of molecular systems is that they typically possess a large number of independent vibrations, with frequencies often spanning the entire spectrum of relevant electronic energy gaps. Recent spectroscopic observations and numerical simulations on a water-soluble chlorophyll-binding protein (WSCP) reveal a transition between two regimes of vibronic behavior, a Redfield-like regime in which low-frequency vibrations respond to a delocalized excitonic state, and a Förster-like regime where high-frequency vibrations act as incoherent excitations on individual pigments. Although numerical simulations can reproduce these effects, there is a need for a simple, systematic theory that accurately describes the smooth transition between these two regimes in experimental spectra. Here we address this challenge by generalizing the variational polaron transform approach of [Bloemsma et al., Chem. Phys. 481, 250 (2016)] to include arbitrary bath densities for systems with or without symmetry. We benchmark this theory against both numerical matrix-diagonalization methods and experimental 77 K fluorescence spectra for two WSCP variants, obtaining quite satisfactory agreement in both cases. Here, we apply this theory to offer an explanation for the large loss in apparent electronic coupling in the WSCP Q57K mutant and to examine the likely impact of the interplay between excitonic delocalization and vibrational localization on vibrational sideband shapes and apparent coupling strengths in high-resolution optical spectra for chlorophyll-protein complexes such as WSCP.

14 SOLAR ENERGY↗

Laser deposition of large-area thin films

A new method for fabricating large-area thin films of uniform thickness on a rotating substrate is proposed. Its distinctive features are (i) the presence of a diaphragm, partially transmitting the evaporated material, between the target and substrate and (ii) the translatory motion of the rotating substrate with respect to the target at a certain velocity. The method proposed makes it possible to obtain thin films of uniform thickness on substrates with sizes limited by only the deposition chamber size. The method is experimentally verified by depositing thin CuO films on silicon substrates placed over the radius of a disk 300 mm in diameter. The deviation of the film thickness from the average value does not exceed {+-}3% throughout the entire radius, which confirms good prospects of this method for microelectronics, optical industry, and other modern technologies. (laser technology)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An Integrated Study on a Novel High Temperature High Entropy Alloy

This report summarizes our recent works of theoretical modeling, simulation, and experimental validation of the simulation results on the new refractory high entropy alloy (HEA) design and oxide doped refractory HEA research. The simulation of the stability and thermal dynamics simulation on potential thermal stable candidates were performed and related HEA with oxide doped samples were synthesized and characterized. The HEA ab initio density functional theory and molecular dynamics physical property simulation methods and experimental texture validation techniques development, achievements already reached, course work development, students and postdoc training, and future improvement research directions are briefly introduced.

36 MATERIALS SCIENCE↗

A simple method to measure the isosteric energy of adsorption

The effect of temperature on water vapour desorption isotherms can be described simply using the Clausius-Clapeyron equation and the isosteric energy of adsorption, the latter conventionally estimated using two (or more) isotherms obtained at different temperatures. This approach has some disadvantages, however, and this article puts forward a simple alternative methodology for characterising this isosteric energy experimentally. Our method is based on monitoring the relative humidity of a cementitious material heated under sealed conditions. The evolution of the relative humidity as a function of temperature makes it possible to directly evaluate the isosteric energy. In practice, the tests are performed using a cell of the type that is used for self-desiccation studies.

36 MATERIALS SCIENCE↗

Full-potential KKR within the removed-sphere method: A practical and accurate solution to the Poisson equation

Here an efficient and accurate generalization of the removed-sphere method (RSM) to solve the Poisson equation for total charge density in a solid with space-filling convex Voronoi polyhedra (VPs) and any symmetry is presented. The generalized RSM avoids the use of multipoles and VP shape functions for cellular integrals, which have associated ill-convergent large, double-internal L sums in spherical-harmonic expansions, so that fast convergence in single-L sums is reached. Our RSM adopts full Ewald formulation to work for all configurations or when symmetry breaking occurs, such as for atomic displacements or elastic constant calculations. The structure-dependent coefficients A L that define RSM can be calculated once for a fixed structure and speed up the whole self-consistent-field procedure. The accuracy and rapid convergence properties are confirmed using two analytic models, including the Coulomb potential and energy. We then implement the full-potential RSM using the Green's function Korringa-Kohn-Rostoker (KKR) method for real applications and compare the results with other first-principle methods and experimental data, showing that they are equally as accurate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Correlation between sensors' signals and internal resolution of a strip detector

In this work, the theory of branching cascade processes is applied to the description of signal formation in a strip detector for soft X-rays. The theory is applicable to detectors' absorbers that have a single type of intrinsic particles. Intrinsic particles are particles that are generated by incident particle in detector's absorber and cause signals at the strip detector sensors' electronics. From this theory, it follows the new method of experimental determination of the Fano factor. It is shown, that the relative covariance between two signals of a strip detector depends on the fundamental combination of the Fano factor and the effective energy of the intrinsic particle creation in the absorber material. The important advantage of proposed method is its independence from the sensors' electronic gains and noises. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Theoretical Study of the Single Electron Optical Stochastic Cooling Experiment at the IOTA Facility (Final Technical Report)

The objectives of this proposal were to explore fundamental aspects of radiation from individual and small groups of electrons in the optical stochastic cooling experiment conducted at Fermi National Laboratory's IOTA facility. Professor Swapan Chattopadhyay collaborated directly with the IOTA team on their initial experimental endeavors. Concurrently, a team from Berkeley, including Prof. Wurtele, Dr. Charman, and Dr. Greggory Penn from LBNL, and Prof. Chattapadhyay, pursued a theoretical exploration to identify potential subsequent experiments for IOTA. A wide range of possible experiments were considered, but they do not allow for tests for new quantum mechanical phenomena at the precision level of the current IOTA apparatus. However, the experimentally observed optical stochastic cooling of a single electron in IOTA validated the relevance of the classical electromagnetic field nature of the continuous electron-radiation interaction (as opposed to discrete instantaneous photon emissions and associated 'classical particle trajectory jumps') responsible for cooling and pointed towards innovative methods of experimental techniques to measure 'turn-by-turn' field correlations. Such measurements have the promise of bridging the transition from classical fields building up to discrete quantum transitions and enhance proper theoretical understanding.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Towards phasing using high X-ray intensity

X-ray free-electron lasers (XFELs) show great promise for macromolecular structure determination from sub-micrometre-sized crystals, using the emerging method of serial femtosecond crystallography. The extreme brightness of the XFEL radiation can multiply ionize most, if not all, atoms in a protein, causing their scattering factors to change during the pulse, with a preferential `bleaching' of heavy atoms. This paper investigates the effects of electronic damage on experimental data collected from a Gd derivative of lysozyme microcrystals at different X-ray intensities, and the degree of ionization of Gd atoms is quantified from phased difference Fourier maps. In conclusion, a pattern sorting scheme is proposed to maximize the ionization contrast and the way in which the local electronic damage can be used for a new experimental phasing method is discussed.

74 ATOMIC AND MOLECULAR PHYSICS↗

Optimal Experimental Design for Inverse Problems in the Presence of Observation Correlations

Optimal experimental design (OED) is the general formalism of sensor placement and decisions on the data collection strategy for engineered or natural experiments. This problem is prevalent in many critical fields such as battery design, numerical weather prediction, geosciences, environmental and urban studies. State-of-the-art computational methods for experimental design do not accommodate correlation structure in observational errors produced by many expensive-to-operate devices such as X-ray machines, radars, and satellites. Discarding evident data correlations leads to biased results, higher expenses, and waste of valuable resources. We present a general formulation of the OED formalism for model-constrained large-scale Bayesian linear inverse problems, where measurement errors are generally correlated. The proposed approach utilizes the Hadamard product of matrices to formulate the weighted-likelihood, and is valid for both finite as well as infinite-dimensional Bayesian inverse problems. Extensive numerical experiments are carried out for empirical verification of the proposed approach using an advection-diffusion model, where the objective is to optimally place a small set of sensors, under a limited budget, to predict the concentration of a contaminant in a closed and bounded domain.

Correlated observations↗

Data on photoneutron reactions from various experiments for {sup 133}Cs, {sup 138}Ba and {sup 209}Bi nuclei

Basic methods for determining cross sections for photoneutron partial reactions are examined. They are obtained directly in experiments with quasimonoeneregetic annihilation photons or from the cross section for the (γ, xn) = (γ, 1n) + 2(γ, 2n) + 3(γ, 3n) +... neutron-yield reaction in experiments with bremsstrahlung photons by introducing corrections based on statistical nuclear-reaction theory. The difference in the conditions of these experiments, which leads to discrepancies between their results because of sizable systematic errors, is analyzed. Physical criteria are used to study the reliability of data on the photodisintegration of {sup 133}Cs, {sup 138}Ba, and {sup 209}Bi nuclei. The cross sections for partial and total reactions satisfying the reliability criteria are evaluated within the experimental–theoretical method (σ{sup eval}(γ, in) = F{sub i}{sup theor} × σ{sup expt}(γ, xn)) on the basis of the experimental cross sections σ{sup expt}(γ, xn) and the results of the calculations within the combined model of photonuclear reactions.

74 ATOMIC AND MOLECULAR PHYSICS↗

Improving neutrino energy estimation of charged-current interaction events with recurrent neural networks in MicroBooNE

We present a deep learning-based method for estimating the neutrino energy of charged-current neutrino-argon interactions. We employ a recurrent neural network (RNN) architecture for neutrino energy estimation in the MicroBooNE experiment, utilizing liquid argon time projection chamber (LArTPC) detector technology. Traditional energy estimation approaches in LArTPCs, which largely rely on reconstructing and summing visible energies, often experience sizable biases and resolution smearing because of the complex nature of neutrino interactions and the detector response. The estimation of neutrino energy can be improved after considering the kinematics information of reconstructed final-state particles. Utilizing kinematic information of reconstructed particles, the deep learning-based approach shows improved resolution and reduced bias for the muon neutrino Monte Carlo simulation sample compared to the traditional approach. In order to address the common concern about the effectiveness of this method on experimental data, the RNN-based energy estimator is further examined and validated with dedicated data-simulation consistency tests using MicroBooNE data. We also assess its potential impact on a neutrino oscillation study after accounting for all statistical and systematic uncertainties and show that it enhances physics sensitivity. This method has good potential to improve the performance of other physics analyses. Published by the American Physical Society 2024

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

First-principles Hubbard U approach for small molecule binding in metal-organic frameworks

We apply first-principles approaches with Hubbard U corrections for calculation of small molecule binding energetics to open-shell transition metal atoms in metal-organic frameworks (MOFs). Using density functional theory with van der Waals dispersion-corrected functionals, we determine Hubbard U values ab initio through an established linear response procedure for M-MOF-74, for a number of different metal centers (M = Ti, V, Cr, Mn, Fe, Co, Ni, and Cu). While our ab initio U values differ from those used in previous work, we show that they result in lattice parameters and electronic contributions to CO{sub 2}-MOF binding energies that lead to excellent agreement with experiments and previous results, yielding lattice parameters within 3%. In addition, U-dependent calculations for an example system, Co-MOF-74, suggest that the CO{sub 2} binding energy grows monotonically with the value of Hubbard U, with the binding energy shifting 4 kJ/mol (or 0.041 eV) over the range of U = 0-5.4 eV. These results provide insight into an approximate but computationally efficient means for calculation of small molecule binding energies to open-shell transition metal atoms in MOFs and suggest that the approach can be predictive with good accuracy, independent of the cations used and the availability of experimental data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-Principles Calculations, Experimental Study, and Thermodynamic Modeling of the Al-Co-Cr System

The phase relations and thermodynamic properties of the condensed Al-Co-Cr ternary alloy system are investigated using first-principles calculations based on density functional theory (DFT) and phase-equilibria experiments that led to X-ray diffraction (XRD) and electron probe micro-analysis (EPMA) measurements. A thermodynamic description is developed by means of the calculations of phase diagrams (CALPHAD) method using experimental and computational data from the present work and the literature. Emphasis is placed on modeling the bcc-A2, B2, fcc-γ, and tetragonal-σ phases in the temperature range of 1173 to 1623 K. Liquid, bcc-A2 and fcc-γ phases are modeled using substitutional solution descriptions. First-principles special quasirandom structures (SQS) calculations predict a large bcc-A2 (disordered)/B2 (ordered) miscibility gap, in agreement with experiments. A partitioning model is then used for the A2/B2 phase to effectively describe the order-disorder transitions. The critically assessed thermodynamic description describes all phase equilibria data well. A2/B2 transitions are also shown to agree well with previous experimental findings.

36 MATERIALS SCIENCE↗

Molecular simulation of CO chemisorption on Co(0001) in presence of supercritical fluid solvent: A potential of mean force study

For several decades, heterogeneous catalytic processes have been improved through utilizing supercritical fluids (SCFs) as solvents. While numerous experimental studies have been established across a range of chemistries, such as oxidation, pyrolysis, amination, and Fischer-Tropsch synthesis, still there is little fundamental, molecular-level information regarding the role of the SCF on elementary heterogeneous catalytic steps. In this study, the influence of hexane solvent on the adsorption of carbon monoxide on Co(0001), as the first step in the reaction mechanism of many processes involving syngas conversion, is probed. Simulations are performed at various bulk hexane densities, ranging from ideal gas conditions (no SCF hexane) to various near- and super-critical hexane densities. For this purpose, both density functional theory and molecular dynamics simulations are employed to determine the adsorption energy and free energy change during CO chemisorption. Potential of mean force calculations, utilizing umbrella sampling and the weighted histogram analysis method, provide the first commentary on SCF solvent effects on the energetic aspects of the chemisorption process. Simulation results indicate an enhanced stability of CO adsorption on the catalyst surface in the presence of supercritical hexane within the reduced pressure range of 1.0–1.5 at a constant temperature of 523 K. Furthermore, it is shown that the maximum stability of CO in the adsorbed state as a function of supercritical hexane density at 523 K nearly coincides with the maximum isothermal compressibility of bulk hexane at this temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental evidence for low-lying quadrupole isovector excitation of 208 Po

In this study, we present the results from an experiment dedicated to measure the lifetime of the \(2^+_2\) state, candidate for the one-phonon mixed-symmetry state, of \(^{208}\) Po. This nucleus was studied in the \(\alpha \) -transfer reaction \(^{204}\) Pb( \(^{12}\) C, \(^{8}\) Be) \(^{208}\) Po and the lifetime of the \(2^+_2\) state was determined by utilizing the Doppler-shift attenuation method. The experimental data show that the \(2^+_2\) state decays with a sizable M 1 transition to the \(2^+_1\) state revealing its isovector nature.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The Gas-Jet Method of Deposition of Nanostructured Silver Films

The synthesis of thin silver films by the gas-jet deposition method is experimentally and theoretically studied. When the metal is deposited onto silicon substrates from a supersonic jet of silver vapor with a helium carrier gas, nanostructured films with a 3−30 nm size of nanostructures are obtained for a 1230−1380 K range of jet source temperatures. The data on Ag–He gas-jet dynamics when it is expanded into vacuum (velocity, temperature, concentration, flux of particles onto a substrate) depending on parameters at the source (vapor temperature, flow rate of a carrier gas) are obtained by the method of direct simulation Monte Carlo. The range of optimal helium flow rates, when the efficiency of a gas-jet source is maximal, is determined. It is established that the presence of a background gas in a deposition chamber at pressure higher than 1 Pa decreases the flow of particles onto a substrate, and a simple way of its evaluation is proposed. Conditions for formation of silver clusters in the jet are determined by using the simulation. It is shown that for experimental deposition regimes there are no clusters in the jet, and the observed silver nanostructures are formed on the substrate surface.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of plasmonic losses on light emission enhancement in quantum-wells coupled to metallic gratings

Recent experimental work has shown significant luminescence enhancement from near-surface quantum-well (QW) structures using metallic grating to convert surface plasmon (SP) modes into radiative modes. This work introduces a detailed theoretical study of plasmonic losses and the role of SPs in improving light extraction from grated light-emitting QW structures, using the fluctuational electrodynamics method. The method explains experimental results demonstrating emission enhancement, light scattering, and plasmonic coupling in the structures. We study these effects in angle-resolved reflectometry and luminescence setups in InGaN QW structures with silver grating. In contrast to experiments, our model allows direct calculation of the optical losses. The model predicts that the plasmonic coupling and scattering increases light emission by a factor of up to three compared to a flat semiconductor structure. This corresponds to reducing the absorption losses from approximately 93% in the ungrated metallic structure to 75% in the grated structure. Lower losses are associated with a significant emission enhancement enabled by the SPs of silver/GaN interfaces, which are present in the blue/green wavelength range, and can be optimized by carefully nanostructuring the metal layer and by the positioning of the QW. In general, the enhancement results from the interplay of mode scattering, conversion of SP energy directly into light, and losses in the metallic grating. The reported losses are very high when compared to the losses present in modern light-emitting diodes (LEDs). Albeit, our work provides tools needed for further optimization of plasmonic light extraction, eventually leading to highly efficient LEDs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗