Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Energy levels”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Coherent Vibrational Wavepacket Dynamics in Platinum(II) Dimers and Their Implications

Vibrational coherence in the metal-metal-to-ligand-charge transfer (MMLCT) excited state of cyclometalated platinum dimers with a pseudo C 2 symmetry was investigated where two nearly degenerate transitions from HOMO (metal-metal σ* orbital) to higher energy ligand π* orbitals could be simultaneously induced. We observed oscillatory features in femtosecond degenerate transient absorption (TA) signals from complexes [(ppy)Pt(μ- t Bu 2 pz)] 2 (1) and anti-[(ppy)Pt(μ-pyt)] 2 (2), which are attributed to coherent nuclear motions that modulate the HOMO (antibonding σ*) energy level, and hence the energy for the MMLCT transition. The characteristics of such coherent nuclear motions, such as the oscillatory frequency and the dephasing time, differ between 1 and 2 and are explained by mainly two structural factors that could influence the vibrational coherence, the Pt-Pt distance (2.97 Å for 1 vs. 2.85 Å for 2) and molecular shape (1 in an “A” frame vs. 2 in an “H” frame). Because the electronic coupling between the two Pt atoms determines the energy splitting of the bonding σ and antibonding σ* orbital, the Pt-Pt stretching mode coupled to the MMLCT transition changes the inter Pt distance from that of the ground state. Interestingly, while 1 shows a single PtPt stretching frequency of 120 cm-1 in the MMLCT state, 2 exhibits multiple downshifted frequencies (80 and 105 cm-1) in the MMLCT state along with a shorter vibrational dephasing time than 1. Based on the ground state optimized structures and Raman calculations, the changes evident in the vibrational wavepaket dynamics in 2 are closely correlated with the “H” framed geometry in 2 compared to the “A” frame in 1, leading to the sharp increase in - interaction between ppy ligands. Although the TA experiments do not directly reveal the ultrafast intersystem crossing (ISC) because of a strong coherent spike at early timescales, the dependence of the vibrational wavepacket dynamics on molecular geometry can be understood based on previously proposed potential energy surfaces (PES) as function of PtPt distance, suggesting that the interaction between the cyclometalating ligands can be a key factor in determining the PtPt shortening and the related energy relaxation dynamics in the Pt(II) dimers. Further experiments using femtosecond broadband TA and X-ray scattering spectroscopy are planned to investigate directly the ISC and PtPt contraction, to support the relationship between ground state molecular geometry and photoinduced structural changes in the Pt(II) dimers.

Kim, Pyosang↗

Design of two-photon molecular tandem architectures for solar cells by ab initio theory

An extensive database of spectroscopic properties of molecules from ab initio calculations is used to design molecular complexes for use in tandem solar cells that convert two photons into a single electron–hole pair, thereby increasing the output voltage while covering a wider spectral range. Three different architectures are considered: the first two involve a complex consisting of two dye molecules with appropriately matched frontier orbitals, connected by a molecular diode. Optimized combinations of dye molecules are determined by taking advantage of our computational database of the structural and energetic properties of several thousand porphyrin dyes. The third design is a molecular analogy of the intermediate band solar cell, and involves a single dye molecule with strong intersystem crossing to ensure a long lifetime of the intermediate state. Based on the calculated energy levels and molecular orbitals, energy diagrams are presented for the individual steps in the operation of such tandem solar cells. We find that theoretical open circuit voltages of up to 1.8 V can be achieved using these tandem designs. Questions about the practical implementation of prototypical devices, such as the synthesis of the tandem molecules and potential loss mechanisms, are addressed.

14 SOLAR ENERGY↗

Topological classification of the Goryachev integrable case in rigid body dynamics

A topological analysis of the Goryachev integrable case in rigid body dynamics is made on the basis of the Fomenko-Zieschang theory. The invariants (marked molecules) which are obtained give a complete description, from the standpoint of Liouville classification, of the systems of Goryachev type on various level sets of the energy. It turns out that on appropriate energy levels the Goryachev case is Liouville equivalent to many classical integrable systems and, in particular, the Joukowski, Clebsch, Sokolov and Kovalevskaya-Yehia cases in rigid body dynamics, as well as to some integrable billiards in plane domains bounded by confocal quadrics -- in other words, the foliations given by the closures of generic solutions of these systems have the same structure. Bibliography: 15 titles.

97 MATHEMATICS AND COMPUTING↗

High resolution spectroscopic study of Be Λ 10

Spectroscopy of a $^{10}_{\Lambda}$Be hypernucleus was carried out at JLab Hall C using the $(e,e^{\prime}K^{+})$ reaction. A new magnetic spectrometer system (SPL+HES+HKS), specifically designed for high resolution hypernuclear spectroscopy, was used to obtain an energy spectrum with a resolution of 0.78 MeV (FWHM). The well-calibrated spectrometer system of the present experiment using the $p(e,e^{\prime}K^{+})\Lambda,\Sigma^{0}$ reactions allowed us to determine the energy levels, and the binding energy of the ground state peak (mixture of 1$^{-}$ and 2$^{-}$ states) was obtained to be B$_{\Lambda}$=8.55$\pm$0.07(stat.)$\pm$0.11(sys.) MeV. Furthermore, the result indicates that the ground state energy is shallower than that of an emulsion study by about 0.5 MeV which provides valuable experimental information on charge symmetry breaking effect in the $\Lambda N$ interaction.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A Load Switching Group based Feeder-level Microgrid Energy Management Algorithm for Service Restoration in Power Distribution System

This paper presents a load switching group based energy management system (LSG-EMS) for operating microgrids on a distribution feeder powered by one or multiple grid-forming distributed energy resources. Loads on a distribution feeder are divided into load switching groups that can be remotely switched on and off. The LSG-EMS algorithm, formulated as a mixed-integer linear programming (MILP) problem, has an objective function of maximizing the served loads while minimizing the total number of switching actions. A new set of topology constraints are developed for allowing multiple microgrids to be formed on the feeder and selecting the optimal supply path. Customer comfort is accounted for by maximizing the supply duration in the customer preferred service period and enforcing a minimum service duration. The proposed method is demonstrated on a modified IEEE 33-bus system using actual customer data. Simulation results show that the LSG-EMS successfully coordinates multiple grid-forming sources by selecting an optimal supply topology that maximizes the supply period of both the critical and noncritical loads while minimizing customer service interruptions in the service restoration process.

Hu, Rongxing↗

Surface analytical investigation on organometal triiodide perovskite

In a little over a year, there has been an unexpected breakthrough and rapid evolution of highly efficient solid-state hybrid solar cells based on organometal trihalide perovskite materials. This technology has the potential to produce solar cells with the very highest efficiencies while retaining the very lowest cost. The authors have measured the electronic density of states of CH 3 NH 3 PbI 3 using ultraviolet photoemission spectroscopy (UPS), inverse photoemission spectroscopy (IPES), and x-ray photoemission spectroscopy(XPS). The valence band maximum and conduction band minimum positions are obtained from the UPS and IPES spectra, respectively, by linear extrapolation of the leading edges. The authors investigate the Au/perovskite and C60/perovskite interfaces by UPS and XPS. An interface dipole of 0.1 eV is observed at Au/perovskite interface. The energy levels of perovskite shift upward by ca.0.4 eV with Au coverage of 64 Å upon it, resulting in band bending, hence a built-in field in perovskite that encourages hole transport to the interface. The XPS results show a strong initial shift of core levels to lower binding energy in the perovskite, which indicates that electrons transfer from the perovskitefilm to fullerene molecules. Further deposition of fullerene forms C60 solid, accompanied by the reduction of the electron transfer. As a result, the strongest electron transfer happened at 1/4 monolayer of fullerene.

42 ENGINEERING↗

Electrical Properties and Energy Parameters of n-FeS{sub 2}/p-Cd{sub 1–x}Zn{sub x}Te Heterojunctions

The conditions for fabricating n-FeS{sub 2}/p-Cd{sub 1–x}Zn{sub x}Te heterojunctions by the spray pyrolysis of thin pyrite films on p-Cd{sub 1–x}Zn{sub x}Te crystalline substrates are investigated. A comprehensive analysis of the current–voltage (I–V) and capacitance–voltage (C–V) characteristics makes it possible to establish the limitation of the reverse current by the space-charge region at small reverse biases and consider the mechanisms of current formation with the participation of energy levels near the heterojunction. A model of the energy profile of the n-FeS{sub 2}/p-Cd{sub 1–x}Zn{sub x}Te heterojunction is proposed, which turns out to be in good correspondence with the experimentally determined parameters and the dynamics of their change with a variation in temperature.

36 MATERIALS SCIENCE↗

United States County-Level Industrial Energy Use

Estimated industrial manufacturing agriculture construction and mining energy estimated by North American Industrial Classification System NAICS code county and fuel type for 2014. Additional disaggregation by end use e.g. machine drive process heating facility lighting is provided for manufacturing agriculture and mining industries. Estimation approach is described in detail in the data_foundation folder here https//github.com/NREL/Industry-Energy-Tool/.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Fixed-range optimum trajectories for short-haul aircraft

An algorithm, based on the energy-state method, is derived for calculating optimum trajectories with a range constraint. The basis of the algorithm is the assumption that optimum trajectories consist of, at most, three segments: an increasing energy segment (climb); a constant energy segment (cruise); and a decreasing energy segment (descent). This assumption allows energy to be used as the independent variable in the increasing and decreasing energy segments, thereby eliminating the integration of a separate adjoint differential equation and simplifying the calculus of variations problem to one requiring only pointwise extremization of algebraic functions. The algorithm is used to compute minimum fuel, minimum time, and minimum direct-operating-cost trajectories, with range as a parameter, for an in-service CTOL aircraft and for an advanced STOL aircraft. For the CTOL aircraft and the minimum-fuel performance function, the optimum controls, consisting of air-speed and engine power setting, are continuous functions of the energy in both climb and descent as well as near the maximum or cruise energy. This is also true for the STOL aircraft except in the descent where at one energy level a nearly constant energy dive segment occurs, yielding a discontinuity in the airspeed at that energy. The reason for this segment appears to be the relatively high fuel flow at idle power of the engines used by this STOL aircraft. Use of a simplified trajectory which eliminates the dive increases the fuel consumption of the total descent trajectory by about 10 percent and the time to fly the descent by about 19 percent compared to the optimum.

Erzberger, H.↗

The correlation of sodium and potassium metabolism with the level of energy consumption in man during adaptation to heat

The sodium and potassium metabolism was studied in a thermal chamber at 35 deg and 80 percent relative humidity in 8 men for a period of 6 days. The control group (3 subjects) were outside of the chamber at a comfortable ambient temperature. The intracellular sodium and potassium metabolism were assessed based on their content in the erythrocytes. The finding was that during adaptation to heat, a considerable amount of sodium was excreted by the body in the sweat and urine (about 1/3 of the sodium content of the human body) as compared with its intake and the amount of potassium retained in the body. Changes in the concentration of sodium and potassium may serve as indexes of the state of adaptation processes during constant exposure to heat.

Afanasyev, B. G.↗

Reconstituted Three-Dimensional Interactive Imaging

A method combines two-dimensional images, enhancing the images as well as rendering a 3D, enhanced, interactive computer image or visual model. Any advanced compiler can be used in conjunction with any graphics library package for this method, which is intended to take digitized images and virtually stack them so that they can be interactively viewed as a set of slices. This innovation can take multiple image sources (film or digital) and create a "transparent" image with higher densities in the image being less transparent. The images are then stacked such that an apparent 3D object is created in virtual space for interactive review of the set of images. This innovation can be used with any application where 3D images are taken as slices of a larger object. These could include machines, materials for inspection, geological objects, or human scanning. Illuminous values were stacked into planes with different transparency levels of tissues. These transparency levels can use multiple energy levels, such as density of CT scans or radioactive density. A desktop computer with enough video memory to produce the image is capable of this work. The memory changes with the size and resolution of the desired images to be stacked and viewed.

Hamilton, Joseph↗