Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Determinants”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

SVD-aided pseudo principal-component analysis: A new method to speed up and improve determination of the optimum kinetic model from time-resolved data

Determination of the optimum kinetic model is an essential prerequisite for characterizing dynamics and mechanism of a reaction. Here, we propose a simple method, termed as singular value decomposition-aided pseudo principal-component analysis (SAPPA), to facilitate determination of the optimum kinetic model from time-resolved data by bypassing any need to examine candidate kinetic models. We demonstrate the wide applicability of SAPPA by examining three different sets of experimental time-resolved data and show that SAPPA can efficiently determine the optimum kinetic model. In addition, the results of SAPPA for both time-resolved X-ray solution scattering (TRXSS) and transient absorption (TA) data of the same protein reveal that global structural changes of protein, which is probed by TRXSS, may occur more slowly than local structural changes around the chromophore, which is probed by TA spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal diffusivity determination using heterodyne phase insensitive transient grating spectroscopy

The elastic and thermal transport properties of opaque materials may be measured using transient grating spectroscopy (TGS) by inducing and monitoring periodic excitations in both reflectivity and surface displacement. The “phase grating” response encodes both properties of interest, but complicates quantitative analysis by convolving temperature dynamics with surface displacement dynamics. Hence, thermal transport characteristics are normally determined using the “amplitude grating” response to isolate the surface temperature dynamics. Yet, this signal character requires absolute heterodyne phase calibration and contains no elastic property information. Here, a method is developed by which phase grating TGS measurements may be consistently analyzed to determine thermal diffusivity with no prior knowledge of the expected properties. To demonstrate this ability, the wavelength-dependent 1D effective thermal diffusivity of pure germanium is measured using this type of response and found to be consistent with theoretical predictions made by solving the Boltzmann transport equation. This ability to determine the elastic and thermal properties from a single set of TGS measurements will be particularly advantageous for new in situ implementations of the technique being used to study dynamic materials systems.

36 MATERIALS SCIENCE↗

Sound speed determination in copper shock compressed to 190 GPa

Sound speed measurements in shock compressed solids have long been valuable for the development of equations of state at extreme conditions, shock-induced phase transformations, and a comprehensive characterization of the thermophysical response of high-pressure standards. We present results from plate impact experiments to 190 GPa to determine the longitudinal sound speed in copper—an important high-pressure standard. Surprisingly, the sound speeds determined using the two most common experimental techniques—the front surface impact (FSI) approach and the release wave overtake (RWO) approach—diverge significantly for stresses greater than ~100 GPa. Further analyses, including numerical simulations, show that the FSI experiments provide the correct sound speeds and that fundamental assumptions underlying the RWO method are likely violated due to the complex release response of shock compressed copper. The sound speeds determined using the FSI approach provide for a more accurate high-pressure description of copper in dynamic compression experiments. The present findings are in contrast to the results for shock compressed silver [Wallace et al., Phys. Rev. B 104, 214106 (2021)], where both methods provided consistent sound speed results. Thus, the findings presented here demonstrate the need to experimentally verify the validity of the RWO method on a case-by-case basis. Finally, we note that even at the high stresses in the present work, the copper unloading response shows a time-dependent, quasielastic response often observed in metals at lower stresses.

36 MATERIALS SCIENCE↗

ADP-dependent 6-Phosphofructokinase from Pyrococcus horikoshii OT3: STRUCTURE DETERMINATION AND BIOCHEMICAL CHARACTERIZATION OF PH1645

Some hyperthermophilic archaea use a modified glycolytic pathway that employs an ADP-dependent glucokinase (ADP-GK) and an ADP-dependent phosphofructokinase (ADP-PFK) or, in the case of Methanococcus jannaschii, a bifunctional ADP-dependent glucophosphofructokinase (ADP-GK/PFK). The crystal structures of three ADP-GKs have been determined. However, there is no structural information available for ADP-PFKs or the ADP-GK/PFK. Here, we present the first crystal structure of an ADP-PFK from Pyrococcus horikoshii OT3 (PhPFK) in both apo- and AMP-bound forms determined to 2.0-{angstrom} and 1.9-{angstrom} resolution, respectively, along with biochemical characterization of the enzyme. The overall structure of PhPFK maintains a similar large and small {alpha}/{beta} domain structure seen in the ADP-GK structures. A large conformational change accompanies binding of phosphoryl donor, acceptor, or both, in all members of the ribokinase superfamily characterized thus far, which is believed to be critical to enzyme function. Surprisingly, no such conformational change was observed in the AMP-bound PhPFK structure compared with the apo structure. Through comprehensive site-directed mutagenesis of the substrate binding pocket we identified residues that were critical for both substrate recognition and the phosphotransfer reaction. The catalytic residues and many of the substrate binding residues are conserved between PhPFK and ADP-GKs; however, four key residues differ in the sugar-binding pocket, which we have shown determine the sugar-binding specificity. Using these results we were able to engineer a mutant PhPFK that mimics the ADP-GK/PFK and is able to phosphorylate both fructose 6-phosphate and glucose.

36 MATERIALS SCIENCE↗

Assessing the use of reflectance spectroscopy in determining CsCl stress in the model species Arabidopsis thaliana

Here, reflectance spectroscopy is a rapid and non-destructive analytical technique that may be used for assessing plant stress, and has potential applications for use in remediation. Changes in reflectance such as that due to metal stress may occur before damage is visible, and existing studies have shown that metal stress does cause changes in plant reflectance. To further investigate the potential use of reflectance spectroscopy as a method for assessing metal stress in plants, an exploratory study was conducted in which Arabidopsis thaliana plants were treated twice weekly in a laboratory setting with varying levels (0, 0.5, or 5 mM (millimolar)) of caesium chloride (CsCl) solution, and reflectance spectra were collected every week for three weeks using an Analytical Spectral Devices FieldSpec Pro spectroradiometer with both a contact probe (CP) and a field of view (FOV) probe at 36.8 and 66.7 cm, respectively, above the plant. Plants were harvested each week after spectra collection for determination of relative water content and chlorophyll content. A visual assessment of the plants was also conducted using point observations on a uniform grid of 81 points. A mixed-effects model analysis was conducted for each vegetation index (VI) considered to determine the effects of length of treatment, treatment level, view with which spectra were acquired, and the interactions of these terms. Two-way analyses of variance (ANOVAs) were performed on the aforementioned endpoints (e.g. chlorophyll content) to determine the significance of the effects of treatment level and length of treatment. Multiple linear regression (MLR) was used to develop a predictive model for each endpoint, considering VI acquired at each view (CP, high FOV, and low FOV). Of the 14 VI considered, 8 were included in the MLR models. Contact probe readings and FOV readings differed significantly, but FOV measurements were generally consistent at each height.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Systematic Source Determination and X-Ray Radiography Detection of Nonuniformities on High-Density Carbon Ablators

Recent deuterium-tritium (D-T)–layered implosion experiments at the National Ignition Facility have achieved a burning plasma and >1-MJ neutron yield. A series of repeat experiments have shown that the degree of performance is very likely dependent on capsule quality, including the quantity of what are collectively termed “high- Z particles.” These particles are detected on a custom-built radiography system, known as the Sagometer, during the final target qualification process. The term particles is misleading, as the source of these nonuniformities in the capsule images is uncertain; the term detection will be used instead. An increased number of D-T targets have been rejected at the final stages of production due to Sagometer detections. Late detections are deleterious in terms of loss of production parts, effort, and overall operating efficiency. In response, we undertook an effort to determine the origin of these detections and to ultimately mitigate target losses caused by them. Through careful testing and analysis, we have determined neither insufficient production cleanliness nor hohlraum shedding is responsible for the detections on the capsule. Here, we determined that the detections are inherent to the capsule and have made efforts to use the Zeiss Xradia to identify them earlier in the production process. While testing revealed the Xradia is not currently sufficient for identifying such particles using radiography images, we continue to look to other forms of metrology to down select the capsules early in the process.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

AGE DETERMINATION FOR 346 NEARBY STARS IN THE HERSCHEL DEBRIS SURVEY

DEBRIS is a flux-limited survey of nearby stars (spectral types A-M) for evidence of debris disks with the Herschel Space Observatory. One goal of the survey is to determine disk incidence as a function of various stellar parameters. Understanding debris disk evolution depends on knowledge of the precise age of stars around which these debris disks are found. However, finding ages for field stars is notoriously difficult. Furthermore, in an unbiased sample like DEBRIS, one is working with stars across many spectral types. This requires a multi-method approach to age determination. In this paper, we outline several methods of age determination broken down by spectral type, including some strengths and limitations of each method. In total, we were able to calculate ages for 263 of 274 F-, G-, and K-type stars, and all 83 A-type stars in the DEBRIS sample.

79 ASTRONOMY AND ASTROPHYSICS↗

SPECTROSCOPIC METALLICITY DETERMINATIONS FOR W UMa-TYPE BINARY STARS

This study is the first attempt to determine the metallicities of W UMa-type binary stars using spectroscopy. We analyzed about 4500 spectra collected at the David Dunlap Observatory. To circumvent problems caused by the extreme spectral line broadening and blending and by the relatively low quality of the data, all spectra were subject to the same broadening function (BF) processing to determine the combined line strength in the spectral window centered on the Mg I triplet between 5080 A and 5285 A. All individual integrated BFs were subsequently orbital-phase averaged to derive a single line-strength indicator for each star. The star sample was limited to 90 W UMa-type (EW) binaries with the strict phase-constancy of colors and without spectral contamination by spectroscopic companions. The best defined results were obtained for an F-type sub-sample (0.32 < (B - V){sub 0} < 0.62) of 52 binaries for which integrated BF strengths could be interpolated in the model atmosphere predictions. The logarithmic relative metallicities, [M/H], for the F-type sub-sample indicate metal abundances roughly similar to the solar metallicity, but with a large scatter which is partly due to combined random and systematic errors. Because of the occurrence of a systematic color trend resulting from inherent limitations in our approach, we were forced to set the absolute scale of metallicities to correspond to that derived from the m{sub 1} index of the Stroemgren uvby photometry for 24 binaries of the F-type sub-sample. The trend-adjusted metallicities [M/H]{sub 1} are distributed within -0.65 < [M/H]{sub 1} < +0.50, with the spread reflecting genuine metallicity differences between stars. One half of the F-sub-sample binaries have [M/H]{sub 1} within -0.37 < [M/H]{sub 1} < +0.10, a median of -0.04 and a mean of -0.10, with a tail toward low metallicities, and a possible bias against very high metallicities. A parallel study of kinematic data, utilizing the most reliable and recently obtained proper motion and radial velocity data for 78 binaries of the full sample, shows that the F-type sub-sample binaries (44 stars with both velocities and metallicity determinations) have similar kinematic properties to solar-neighborhood, thin-disk dwarfs with space velocity component dispersions: {sigma}U = 33 km s{sup -1}, {sigma}V = 23 km s{sup -1} and {sigma}W = 14 km s{sup -1}. FU Dra with a large spatial velocity, V{sub tot} = 197 km s{sup -1} and [M/H]{sub 1} = -0.6 {+-} 0.2, appears to be the only thick-disk object in the F-type sub-sample. The kinematic data indicate that the F-type EW binaries are typical, thin-disk population stars with ages about 3-5.5 Gyr. The F-type binaries that appear to be older than the rest tend to have systematically smaller mass ratios than most of the EW binaries of the same period.

79 ASTRONOMY AND ASTROPHYSICS↗

OXYGEN METALLICITY DETERMINATIONS FROM OPTICAL EMISSION LINES IN EARLY-TYPE GALAXIES

We measured the oxygen abundances of the warm (T {approx} 10{sup 4} K) phase of gas in seven early-type galaxies through long-slit observations. A template spectra was constructed from galaxies void of warm gas and subtracted from the emission-line galaxies, allowing for a clean measurement of the nebular lines. The ratios of the emission lines are consistent with photoionization, which likely originates from the ultraviolet flux of postasymototic giant branch stars. We employ H II region photoionization models to determine a mean oxygen metallicity of 1.01 {+-} 0.50 solar for the warm interstellar medium (ISM) in this sample. This warm ISM 0.5-1.5 solar metallicity is consistent with modern determinations of the metallicity in the hot (T {approx} 10{sup 6}-10{sup 7} K) ISM and the upper range of this warm ISM metallicity is consistent with stellar population metallicity determinations. A solar metallicity of the warm ISM favors an internal origin for the warm ISM such as asymptotic giant branch mass loss within the galaxy.

99 GENERAL AND MISCELLANEOUS↗

DETERMINATION OF STELLAR RADII FROM ASTEROSEISMIC DATA

The NASA Kepler mission is designed to find planets through transits. Accurate and precise radii of the detected planets depend on knowing the radius of the host star accurately, which is difficult unless the temperature and luminosity of the star are known precisely. Kepler, however, has an asteroseismology program that will provide seismic variables that can characterize stellar radii easily, accurately, and extremely precisely. In this paper, we describe the Yale-Birmingham (YB) method to determine stellar radii using a combination of seismic and conventional variables and analyze the effect of these variables on the result. We find that for main-sequence stars, a knowledge of the parallax is not important to get accurate radii using the YB method: we can get results to an accuracy and precision of better than a few percent if we know the effective temperature and the seismic parameters for these stars. Metallicity does not make much difference either. However, good estimates of the effective temperature and metallicity, along with those of the seismic parameters, are essential to determine radii of subgiants properly. On the other hand, for red giants we find that determining radii properly is not possible without a good estimate of the parallax. We find that the so-called 'surface term' in the seismic data has minimal effect on the inferred radii. Uncertainties in the convective mixing length can matter under some circumstances and can cause a systematic shift in the inferred radii. Blind tests with data simulated to match those expected from the asteroseismic survey phase of Kepler show that it will be possible to infer stellar radii successfully using our method.

79 ASTRONOMY AND ASTROPHYSICS↗

THE EFFECT OF STARSPOTS ON ACCURATE RADIUS DETERMINATION OF THE LOW-MASS DOUBLE-LINED ECLIPSING BINARY GU Boo

GU Boo is one of only a relatively small number of well-studied double-lined eclipsing binaries that contain low-mass stars. Lopez-Morales and Ribas present a comprehensive analysis of multi-color light and radial velocity curves for this system. The GU Boo light curves presented by Lopez-Morales and Ribas had substantial asymmetries, which were attributed to large spots. In spite of the asymmetry, Lopez-Morales and Ribas derived masses and radii accurate to {approx_equal}2%. We obtained additional photometry of GU Boo using both a CCD and a single-channel photometer and modeled the light curves with the ELC software to determine if the large spots in the light curves give rise to systematic errors at the few percent level. We also modeled the original light curves from the work of Lopez-Morales and Ribas using models with and without spots. We derived a radius of the primary of 0.6329 +- 0.0026 R{sub sun}, 0.6413 +- 0.0049 R{sub sun}, and 0.6373 +- 0.0029 R{sub sun} from the CCD, photoelectric, and Lopez-Morales and Ribas data, respectively. Each of these measurements agrees with the value reported by Lopez-Morales and Ribas (R{sub 1} = 0.623 +- 0.016 R{sub sun}) at the level of {approx}2%. In addition, the spread in these values is {approx}1%-2% from the mean. For the secondary, we derive radii of 0.6074 +- 0.0035 R{sub sun}, 0.5944 +- 0.0069 R{sub sun}, and 0.5976 +- 0.0059 R{sub sun} from the three respective data sets. The Lopez-Morales and Ribas value is R{sub 2} = 0.620 +- 0.020 R{sub sun}, which is {approx}2%-3% larger than each of the three values we found. The spread in these values is {approx}2% from the mean. The systematic difference between our three determinations of the secondary radius and that of Lopez-Morales and Ribas might be attributed to differences in the modeling process and codes used. Our own fits suggest that, for GU Boo at least, using accurate spot modeling of a single set of multi-color light curves results in radii determinations accurate at the {approx}2% level.

79 ASTRONOMY AND ASTROPHYSICS↗

DETERMINING THE INITIAL HELIUM ABUNDANCE OF THE SUN

We determine the dependence of the initial helium abundance and the present-day helium abundance in the convective envelope of solar models (Y {sub ini} and Y {sub surf}, respectively) on the parameters that are used to construct the models. We do so by using reference standard solar models (SSMs) to compute the power-law coefficients of the dependence of Y {sub ini} and Y {sub surf} on the input parameters. We use these dependencies to determine the correlation between Y {sub ini} and Y {sub surf} and use this correlation to eliminate uncertainties in Y {sub ini} from all solar model input parameters except the microscopic diffusion rate. We find an expression for Y {sub ini} that depends only on Y {sub surf} and the diffusion rate. By adopting the helioseismic determination of solar surface helium abundance, Y {sup surf} {sub sun} = 0.2485 {+-} 0.0035, and an uncertainty of 20% for the diffusion rate, we find that the initial solar helium abundance, Y {sup ini} {sub sun}, is 0.278 {+-} 0.006 independently of the reference SSMs (and particularly on the adopted solar abundances) used in the derivation of the correlation between Y {sub ini} and Y {sub surf}. When non-SSMs with extra mixing are used, then we derive Y {sup ini} {sub sun} = 0.273 {+-} 0.006. In both cases, the derived Y {sup ini} {sub sun} value is higher than that directly derived from solar model calibrations when the low-metallicity solar abundances (e.g., by Asplund et al.) are adopted in the models.

79 ASTRONOMY AND ASTROPHYSICS↗

X-RAY, FUV, AND UV OBSERVATIONS OF {alpha} CENTAURI B: DETERMINATION OF LONG-TERM MAGNETIC ACTIVITY CYCLE AND ROTATION PERIOD

Over the last couple of decades we have been carrying out a study of stellar magnetic activity, dynamos, atmospheric physics, and spectral irradiances from a sample of solar-type G0-5 V stars with different ages. One of the major goals of this program is to study the evolution of the Sun's X-ray through NUV spectral irradiances with age. Of particular interest is the determination of the young Sun's elevated levels of high-energy fluxes because of the critical roles that X-ray (coronal) through FUV (transition region (TR), chromospheric) emissions play on the photochemical and photoionization evolution (and possible erosion) of early, young planetary atmospheres and ionospheres. Motivated by the current exoplanetary search missions (such as Kepler and CoRoT, along with the planned Space Interferometry Mission and Darwin/Terrestrial Planet Finder missions) that are hunting for Earth-size planets in the habitable zones (liquid water) of nearby main-sequence G-M stars, we are expanding our program to cooler, less luminous, but very importantly, much more numerous main-sequence K-type stars, such as {alpha} Centauri B. The long life (2-3x longer than the Sun) and slow evolution of K stars provide nearly constant energy sources for possible hosted planets. This program parallels our 'Sun in Time' program, but extends the study to stars with deeper convective zone depths. Presented here are X-ray (coronal; ROSAT, Chandra, XMM-Newton), UV (TR; International Ultraviolet Explorer (IUE)), NUV (chromospheric; IUE), and recently acquired FUV (TR/chromospheric; FUSE Cycles 7/8) observations of the K1 V star {alpha} Cen B (HD 128621; V = 1.33; (B - V) = +0.88; {tau} = 5.6 {+-} 0.6 Gyr). These combined high-energy measures provide a more complete look into the nature of {alpha} Cen B's magnetic activity and X-ray-UV radiances. We find that {alpha} Cen B has exhibited significant long-term variability in X-ray through NUV emission fluxes, indicating a solar-like long-term activity cycle of P{sub cycle} = 8.84 {+-} 0.4 years. In addition, analysis of the short-term rotational modulation of mean light due to the effects of magnetically active regions has yielded a well-determined rotation period of P{sub rotation} = 36.2 {+-} 1.4 days. {alpha} Cen B is the only old main-sequence K star with a reliably determined age and rotation period, and for early K stars, as in the case of the Sun for G2 V stars, is an important calibrator for stellar age/rotation/activity relations.

79 ASTRONOMY AND ASTROPHYSICS↗

AUTOMATIC DETERMINATION OF STELLAR PARAMETERS VIA ASTEROSEISMOLOGY OF STOCHASTICALLY OSCILLATING STARS: COMPARISON WITH DIRECT MEASUREMENTS

Space-based projects are providing a wealth of high-quality asteroseismic data, including frequencies for a large number of stars showing solar-like oscillations. These data open the prospect for precise determinations of key stellar parameters, of particular value to the study of extra-solar planetary systems. Given the quantity of the available and expected data, it is important to develop efficient and reliable techniques for analyzing them, including the determination of stellar parameters from the observed frequencies. Here we present the SEEK package developed for the analysis of asteroseismic data from the Kepler mission. A central goal of the package is to obtain a fast and automatic determination of the stellar radius and other parameters in a form that is statistically well defined. The algorithms are tested by comparing the results of the analysis with independent measurements of stellar radius and mass for a sample of well-observed stars. We conclude that the SEEK package fixes stellar parameters with accuracy and precision.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

ANALYTIC SOLUTIONS FOR CURRENT SHEET STRUCTURE DETERMINED BY SELF-CONSISTENT, ANISOTROPIC TRANSPORT PROCESSES IN A GRAVITATIONAL FIELD

A Harris sheet magnetic field with maximum magnitude B{sub 0} and length scale L is combined with the anisotropic electrical conductivity, viscosity, and thermoelectric tensors for an electron-proton plasma to define a magnetohydrodynamic model that determines the steady state of the plasma. The transport tensors are functions of temperature, density, and magnetic field strength, and are computed self-consistently as functions of position x normal to the current sheet. The flow velocity, magnetic field, and gravitational force lie along the z-axis. The plasma is supported against gravity by the viscous force. Analytic solutions are obtained for temperature, density, and velocity. They are valid over a broad range of temperature, density, and magnetic field strength, and so may be generally useful in astrophysical applications. Numerical examples of solutions in the parameter range of the solar atmosphere are presented. The objective is to compare Joule and viscous heating rates, determine the velocity shear that generates viscous forces that support the plasma and are self-consistent with a mean outward mass flux comparable to the solar wind mass flux, and compare the thermoelectric and conduction current contributions to the Joule heating rate. The ratio of the viscous to Joule heating rates per unit mass can exceed unity by orders of magnitude, and increases rapidly with L. The viscous heating rate can be concentrated outside the region where the current density is localized, corresponding to a resistively heated layer of plasma bounded by viscously heated plasma. The temperature gradient drives a thermoelectric current density that can have a magnitude greater than that of the electric-field-driven conduction current density, so thermoelectric effects are important in determining the Joule heating rate.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

ANALYSIS OF TWO SMALL MAGELLANIC CLOUD H II REGIONS CONSIDERING THERMAL INHOMOGENEITIES: IMPLICATIONS FOR THE DETERMINATIONS OF EXTRAGALACTIC CHEMICAL ABUNDANCES

We present long-slit spectrophotometry considering the presence of thermal inhomogeneities (t{sup 2}) of two H II regions in the Small Magellanic Cloud (SMC): NGC 456 and NGC 460. Physical conditions and chemical abundances were determined for three positions in NGC 456 and one position in NGC 460, first under the assumption of uniform temperature and then allowing for the possibility of thermal inhomogeneities. We determined t{sup 2} values based on three different methods: (1) by comparing the temperature derived using oxygen forbidden lines with the temperature derived using helium recombination lines (RLs), (2) by comparing the abundances derived from oxygen forbidden lines with those derived from oxygen RLs, and (3) by comparing the abundances derived from ultraviolet carbon forbidden lines with those derived from optical carbon RLs. The first two methods averaged t{sup 2} = 0.067 {+-} 0.013 for NGC 456 and t{sup 2} = 0.036 {+-} 0.027 for NGC 460. These values of t{sup 2} imply that when gaseous abundances are determined with collisionally excited lines they are underestimated by a factor of nearly two. From these objects and others in the literature, we find that in order to account for thermal inhomogeneities and dust depletion, the O/H ratio in low-metallicity H II regions should be corrected by 0.25-0.45 dex depending on the thermal structure of the nebula or by 0.35 dex if such information is not available.

79 ASTRONOMY AND ASTROPHYSICS↗

An empirical determination of the intergalactic background light using near-infrared deep galaxy survey data out to 5 μm and the gamma-ray opacity of the universe

We extend our previous model-independent determination of the intergalactic background light, based purely on galaxy survey data, out to a wavelength of 5 μm. Our approach enables us to constrain the range of photon densities, based on the uncertainties from observationally determined luminosity densities and colors. We further determine a 68% confidence upper and lower limit on the opacity of the universe to γ-rays up to energies of 1.6/(1 + z) TeV. A comparison of our lower limit redshift-dependent opacity curves to the opacity limits derived from the results of both ground-based air Cerenkov telescope and Fermi-LAT observations of PKS 1424+240 allows us to place a new upper limit on the redshift of this source, independent of IBL modeling.

79 ASTRONOMY AND ASTROPHYSICS↗

Laboratory determination of the infrared band strengths of pyrene frozen in water ice: Implications for the composition of interstellar ices

Broad infrared emission features (e.g., at 3.3, 6.2, 7.7, 8.6, and 11.3 μm) from the gas phase interstellar medium have long been attributed to polycyclic aromatic hydrocarbons (PAHs). A significant portion (10%-20%) of the Milky Way's carbon reservoir is locked in PAH molecules, which makes their characterization integral to our understanding of astrochemistry. In molecular clouds and the dense envelopes and disks of young stellar objects (YSOs), PAHs are expected to be frozen in the icy mantles of dust grains where they should reveal themselves through infrared absorption. To facilitate the search for frozen interstellar PAHs, laboratory experiments were conducted to determine the positions and strengths of the bands of pyrene mixed with H{sub 2}O and D{sub 2}O ices. The D{sub 2}O mixtures are used to measure pyrene bands that are masked by the strong bands of H{sub 2}O, leading to the first laboratory determination of the band strength for the CH stretching mode of pyrene in water ice near 3.25 μm. Our infrared band strengths were normalized to experimentally determined ultraviolet band strengths, and we find that they are generally ∼50% larger than those reported by Bouwman et al. based on theoretical strengths. These improved band strengths were used to reexamine YSO spectra published by Boogert et al. to estimate the contribution of frozen PAHs to absorption in the 5-8 μm spectral region, taking into account the strength of the 3.25 μm CH stretching mode. It is found that frozen neutral PAHs contain 5%-9% of the cosmic carbon budget and account for 2%-9% of the unidentified absorption in the 5-8 μm region.

79 ASTRONOMY AND ASTROPHYSICS↗