Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DISCHARGE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Contraction of Microwave Discharge in the Reactor for Chemical Vapor Deposition of Diamond

It was found that in a hydrogen-methane mixture in microwave plasma reactor for diamond deposition, there is a threshold pressure after which the contraction of microwave discharge occurs. The results of measurements of gas temperature and spatial distributions of optical emission intensity of discharge are presented. The mechanism of discharge contraction is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Wavelength Scanning with a Tilting Interference Filter for Glow-Discharge Elemental Imaging

Glow discharges have long been used for depth profiling and bulk analysis of solid samples. In addition, over the past decade, several methods of obtaining lateral surface elemental distributions have been introduced, each with its own strengths and weaknesses. Challenges for each of these techniques are acceptable optical throughput and added instrumental complexity. Here, these problems are addressed with a tilting-filter instrument. A pulsed glow discharge is coupled to an optical system comprising an adjustable-angle tilting filter, collimating and imaging lenses, and a gated, intensified charge-coupled device (CCD) camera, which together provide surface elemental mapping of solid samples. The tilting-filter spectrometer is instrumentally simpler, produces less image distortion, and achieves higher optical throughput than a monochromator-based instrument, but has a much more limited tunable spectral range and poorer spectral resolution. As a result, the tilting-filter spectrometer is limited to single-element or two-element determinations, and only when the target spectral lines fall within an appropriate spectral range and can be spectrally discerned. Spectral interferences that result from heterogeneous impurities can be flagged and overcome by observing the spatially resolved signal response across the available tunable spectral range. Lastly, the instrument has been characterized and evaluated for the spatially resolved analysis of glow-discharge emission from selected but representative samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Walker Branch Watershed: 15-minute and Daily Stream Discharge and Annual Runoff

This data set reports 15-minute and daily stream discharge, and annual runoff for the West and East Forks draining Walker Branch Watershed (WBW). The long-term Walker Branch Hydrology Monitoring project was intended to document changes in the water balance (precipitation inputs, stream discharge outputs) for the WBW over time. This data set contains three data files of stream discharge (L/s) for 15-minute and daily intervals, and annual runoff (cm). The daily and annual datasets began in 1969 in both East and West Forks, while the 15-minute datasets began in 1994 in both Forks. Data were collected through 2014 for the West Fork, and through 2012 for the East Fork. The Walker Branch Watershed is located on the U.S. Department of Energy's Oak Ridge Reservation in eastern Tennessee.

54 ENVIRONMENTAL SCIENCES↗

Estimating Watershed Subsurface Permeability From Stream Discharge Data Using Deep Neural Networks

Subsurface permeability is a key parameter in watershed models that controls the contribution from the subsurface flow to stream flows. Since the permeability is difficult and expensive to measure directly at the spatial extent and resolution required by fully distributed watershed models, estimation through inverse modeling has had a long history in subsurface hydrology. The wide availability of stream surface flow data, compared to groundwater monitoring data, provides a new data source to infer soil and geologic properties using integrated surface and subsurface hydrologic models. As most of the existing methods have shown difficulty in dealing with highly nonlinear inverse problems, we explore the use of deep neural networks for inversion owing to their successes in mapping complex, highly nonlinear relationships. We train various deep neural network (DNN) models with different architectures to predict subsurface permeability from stream discharge hydrograph at the watershed outlet. The training data are obtained from ensemble simulations of hydrographs corresponding to an permeability ensemble using a fully-distributed, integrated surface-subsurface hydrologic model. The trained model is then applied to estimate the permeability of the real watershed using its observed hydrograph at the outlet. Our study demonstrates that the permeabilities of the soil and geologic facies that make significant contributions to the outlet discharge can be more accurately estimated from the discharge data. Their estimations are also more robust with observation errors. Compared to the traditional ensemble smoother method, DNNs show stronger performance in capturing the nonlinear relationship between permeability and stream hydrograph to accurately estimate permeability. Our study sheds new light on the value of the emerging deep learning methods in assisting integrated watershed modeling by improving parameter estimation, which will eventually reduce the uncertainty in predictive watershed models.

54 ENVIRONMENTAL SCIENCES↗

Surface Water: Stage, Temperature and Discharge, Teller Road Mile Marker 27, Seward Peninsula, Alaska, 2016-2021

Surface water data were collected at one location in the Teller Mile 27 (TL_MM27) Research Basin Site, Seward Peninsula (N64 43' 35.29649", W165 56' 48.42823"). The site was installed and measurements collected from April 2016 to September 2021. During the pandemic, a combination of environmental factors (both animals and climate) led to a gap in the data record from late 2019 to June 2021. Station restarted in June 2021 with the same basin outlet and instrumentation type. These data are being collected to better understand the hydrology of this research basin. The data could also be used as supporting measurements for other research and modeling activities. Stream stage and water temperature are measured every 10 minutes. Discharge in the stream is also measured every site visit using one of two different methods. Most discharge measurements in this data set use the classic US Geological Survey (USGS) style wading rod to measure water velocity at multiple points (every 5 or 10 centimeters) across a known cross-section (https://pubs.usgs.gov/tm/tm3-a8/pdf/tm3-a8.pdf). The second method is the salt-slug mass diffusion method (https://www.uvm.edu/bwrl/lab_docs/protocols/2005_Moore_Slug_salt_dilution_gauging_volumetric_method_Streamline.pdf). Combining the continuous data record with the discrete observations, a stage-discharge relationship was developed. Dataset contains 14 *.csv files including a data dictionary and file-level metadata plus one user guide *.pdf file. DATASET UPDATE: The 2016-2019 data were published in 2019. Data collection continued through 2021 and were added to the dataset in 2025. There were no changes to the 2016-2019 data. Data files now have all years for a measurement combined into one file; whereas before, each measurement and each year had an individual file. The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗

Large-Volume Resonant Microwave Discharge for Plasma Cleaning of a CEBAF 5-Cell SRF Cavity

We report the preliminary results on plasma generation in a 5-cell CEBAF superconducting radio-frequency (SRF) cavity for the application of cavity interior surface cleaning. CEBAF currently has {approx}300 of these five cell cavities installed in the Jefferson Lab accelerator which are mostly limited by cavity surface contamination. The development of an in-situ cavity surface cleaning method utilizing a resonant microwave discharge could lead to significant CEBAF accelerator performance improvement. This microwave discharge is currently being used for the development of a set of plasma cleaning procedures targeted to the removal of various organic, metal and metal oxide impurities. These contaminants are responsible for the increase of surface resistance and the reduction of RF performance in installed cavities. The CEBAF five cell cavity volume is {approx} 0.5 m2, which places the discharge in the category of large-volume plasmas. CEBAF cavity has a cylindrical symmetry, but its elliptical shape and transversal power coupling makes it an unusual plasma application, which requires special consideration of microwave breakdown. Our preliminary study includes microwave breakdown and optical spectroscopy, which was used to define the operating pressure range and the rate of removal of organic impurities.

43 PARTICLE ACCELERATORS↗

Effects of the shielding cylinder and substrate on the characteristics of an argon radio-frequency atmospheric glow discharge plasma jet

With unique features of low breakdown voltages, large and uniform discharge areas and high concentrations of chemically reactive species, radio-frequency, atmospheric-pressure glow discharge (rf APGD) plasma sources produced with bare-metallic electrodes have shown promising prospects in the field of materials processing. In this paper, the spatial distributions (i.e., the directly measured integrated axial distribution and the radial distribution by using the inverse Abel transform) of the emission intensities of the Ar I 696.5 nm line are studied for the argon rf APGD plasma jet under different operation conditions, including variations of the rf power input or the argon flow rate, the existence of the solid shielding cylinder or the substrate. The experimental results show that, with other parameters being unchanged, the emission intensities of the Ar I 696.5 nm line increase with increasing the rf power input or the argon flow rate; and the solid shielding cylinder has more significant influences on the characteristics of the plasma impinging jet by reducing the mass flow rate of the ambient air entrained into the plasma jet region than those for the cases without the existence of the substrate at the downstream of the plasma torch nozzle exit.

36 MATERIALS SCIENCE↗

Evaluating Pressure‐dependent Discharge Behavior of Foil Versus In situ Plated Lithium Metal Anodes in Solid‐State Batteries

Abstract Anode‐free manufacturing of solid‐state batteries (SSBs) shows promise to maximize energy density by eliminating excess lithium (Li) and simplifying battery production. However, high reversibility during discharge (stripping of Li) is necessary for long‐lifetime SSBs with a limited Li reservoir. Further, the plastic flow of Li changes depending on the Li thickness, leading to possible differences in discharge performance under stack pressure. This work investigates the pressure‐dependent discharge performance of anode‐free manufactured SSBs with in situ plated Li and compares the performance to that of conventional thick Li foil cells. Distinct stripping behavior is observed at low pressures (0–1 MPa), where Li diffusivity and initial interfacial contact may control accessible capacity, compared to high pressures (3–10 MPa) where mechanical deformation of Li likely governs stripping behavior. Analysis of impedance spectra collected during stripping shows that additional stack pressure delays the formation of deep, as opposed to lateral, voids in the Li anode. These results provide insights to guide the transition from thick Li foil anodes to anode‐free manufactured SSBs.

Haslam, Catherine G.↗

Chemostatic concentration–discharge behaviour observed in a headwater catchment underlain with discontinuous permafrost

Concentration–discharge dynamics were evaluated in a small (~ 2.25 km2) headwater catchment underlain with discontinuous permafrost on the Seward Peninsula of western Alaska. A large storm, during which 48 mm of rain fell over a 24-h period, enabled the evaluation of solute concentration–discharge response to a sizeable hydrological event, while water stable isotopes enabled an appraisal of the contributions of event water. Under normal catchment conditions, chemostatic behaviour was observed for solutes typically derived from mineral weathering (e.g. calcium, magnesium, sodium and silica). The chemostatic behaviour observed for most solutes under normal catchment conditions indicated that catchment storage and residence times are sufficiently long for many solute generating reactions to approach equilibrium. Following the storm however, most solutes exhibited dilutive and highly variable behaviour. This likely indicated the exceedance of a discharge threshold where chemostatic behaviour could no longer be maintained for most solutes. Dissolved organic carbon and silica were the only solutes monitored to exhibit chemostatic behaviour during all time periods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical Diagnostics of Discharges in and in Contact With Liquids

Discharges in liquids have been the subject of intensive investigations for a broad range of applications and involve highly coupled and complex phenomena with timescales ranging from picoseconds to seconds and length scales from micrometers to centimeters. This review focuses on some of the challenges in optical diagnostics of discharges in and in contact with liquids; this includes the interpretation of optical emission spectra, the inherently stochastic nature of many discharge phenomena including the initial stages of plasma ignition, and the large gradients in species and plasma properties interfacing with a dynamic liquid interface. We report recent notable advances, controversies in interpretations of diagnostics, and remaining opportunities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Water-table and discharge changes associated with the 2016–2017 seismic sequence in central Italy: hydrogeological data and a conceptual model for fractured carbonate aquifers

A seismic sequence in central Italy from August 2016 to January 2017 affected groundwater dynamics in fractured carbonate aquifers. Changes in spring discharge, water-table position, and streamflow were recorded for several months following nine Mw 5.0–6.5 seismic events. Data from 22 measurement sites, located within 100 km of the epicentral zones, were analyzed. The intensity of the induced changes were correlated with seismic magnitude and distance to epicenters. The additional post-seismic discharge from rivers and springs was found to be higher than 9 m{sup 3}/s, totaling more than 0.1 km{sup 3} of groundwater release over 6 months. This huge and unexpected contribution increased streamflow in narrow mountainous valleys to previously unmeasured peak values. Analogously to the L’Aquila 2009 post-earthquake phenomenon, these hydrogeological changes might reflect an increase of bulk hydraulic conductivity at the aquifer scale, which would increase hydraulic heads in the discharge zones and lower them in some recharge areas. The observed changes may also be partly due to other mechanisms, such as shaking and/or squeezing effects related to intense subsidence in the core of the affected area, where effects had maximum extent, or breaching of hydraulic barriers.

58 GEOSCIENCES↗

Formation of an SEI on a LiMn(2)O(4) Cathode during Room Temperature Charge-Discharge Cycling Studied by Soft X-Ray Absorption Spectroscopy at the Fluorine K-edge

The solid electrolyte interface (SEI) formation on the surface of LiMn{sub 2}O{sub 4} electrodes during room temperature charge-discharge cycling was studied using soft X-ray absorption spectroscopy at the Fluorine (F) K-edge. LiMn{sub 2}O{sub 4} electrodes without any binder were prepared by electrostatic spray deposition to eliminate the signal originating from the PVDF binder in the F K-edge X-ray absorption spectra. The F K-edge absorption spectra show that the SEI layer forms at a very early stage of cycling. SEI growth takes place during discharge. In addition, LiF formation is accelerated if the discharge step follows a charge step. The F K-edge absorption spectra suggest that the major component of the SEI is LiF.

25 ENERGY STORAGE↗

Evaluating the Discharge Performance of Heat-Treated Al-Sb Alloys for Al-Air Batteries

In this work, the combined effects of heat treatment and Sb addition on the discharge performance of Al-Sb alloys as anode for Al-air batteries have been evaluated experimentally. The results indicate that heat treatment decreases the electrochemical and discharge activities of Al-Sb alloys. Heat-treated Al-Sb alloys at 550 °C for 3 h show an improved anode performance. The Al-0.02Sb alloy exhibits a high discharge capacity and anodic efficiency of 2758 Ah kg{sup −1} and 92.6%, respectively. Further prolonging the heat treatment time results in a decrease in anode performance. Microstructure characterization indicates that such negative effect is due to the higher-temperature and prolonged heat treatment to bring out significant grain growth and coarsening of Al-Sb precipitates. The corresponding corrosion behaviors are also discussed in detail.

36 MATERIALS SCIENCE↗

Sewage discharge and water self-decay: Streeter and Phelps model application

Due to the high waste deposition in superficial water, studies are necessary to emphasize the importance to monitor and apply tools, such as mathematical modelling. In this study, we used the classic Streeter and Phelps model to simulate the travel time necessary to depurate organic matter in the Tatu stream, at Limeira, São Paulo, Brazil, and to simulate the point-to-point depuration of organic matter in comparison to point-to-point empirical analysis. According to the simulations, organic matter would be established to 10 mg/L O{sub 2} in few hours of time course of water without discharges in the stream, having the watercourse self-decay capacity. In addition, the analysis indicates that possible launches are being carried out along the stream, because, at the collection points, the obtained results presented higher biochemical oxygen demand than the expected for organic matter depuration, which denote discharges occurrences. Thus, this study emphasizes the relevance of monitoring actions and puts the model as a suitable tool to identify discharge sources in water.

54 ENVIRONMENTAL SCIENCES↗

A comprehensive model to capture electrical discharge and spark channel evolution during spark-ignition processes

Emissions reduction through engine efficiency improvements is a priority for automakers who have turned to unconventional engine operation such as highly dilute, boosted, and stratified charge. Given its importance to flame initiation and sustained turbulent flame propagation, reliable and accurate spark ignition models are necessary to design ignition systems that reduce cyclic indicated mean effective pressure (IMEP) variability and increase engine efficiency in these operation modes. In this paper, secondary electric circuit, short-circuit, blowout, and re-strike sub-models are added to the Lagrangian-Eulerian spark ignition (LESI) model to simulate electrical discharge and spark channel elongation in an inert cross-flow combustion vessel. First, the physics of the underlying sub-models are described and the governing equations discussed with the spark channel voltage expression playing a critical role. Then, the experimental and simulations setups are presented. The results section begins with the derivation of spark channel voltage from experimental results. Then, electrical discharge and spark channel elongation simulations in inert flows are carried out using LESI and compared against experimental results. Finally, the results validate the model's ability to accurately predict spark channel elongation, as well as the occurrence of short-circuits, blowouts, re-strikes, and end of discharge.

42 ENGINEERING↗

Modeling the 4D discharge of lithium-ion batteries with a multiscale time-dependent deep learning framework

The lithium-ion battery (LIB) field is moving towards the direction of investigating spatially resolved physical phenomena in the 3D porous microstructure of electrodes. These pore-scale simulations give new insights into the local dynamics of lithiation/de-lithiation and charge transport, Nevertheless, the computational time of these simulations limits the integration of these models in optimization workflows of cycling conditions or electrode manufacturing processes. Machine learning models present a way of assessing in real-time the performance of materials. While several successful techniques for replicating simulations with machine learning have been proposed, this case study presents a more demanding problem, due to the necessity of understanding the behavior of heterogeneous 3D local data, as it evolves in time: this poses both a scientific and a technical challenge. To this end, we propose an autoregressive multiscale convolutional neural network model to predict relevant quantities at the pore-scale in the solid phase: the lithium concentration (in the active material) and potential (in the active material and carbon binder). Here, these are ultimately used to reconstruct the battery discharge curve. 3D images of the electrode microstructures are the input to the network, trained with a dataset of finite element method simulations to predict the discharge behavior of the cathode side in lithium ion batteries. We propose this machine learning model as a proof-of-concept of the applicability of multiscale networks for time-dependent physics problems. The trained model exhibits very high accuracy (with errors lower than 2 %) in forecasting the discharge behavior of new unseen cathodes.

25 ENERGY STORAGE↗

Observation and modeling of inner divertor re-attachment in discharges with lithium coatings in NSTX

In the National Spherical Torus Experiment (NSTX), modifications to the inner divertor plasma regimes are observed in high triangularity, H-mode, NBI heated discharges due to lithium coatings evaporated on the plasma facing components. In particular, the drop in the recombination rate, the reduced neutral pressure and the reduced electron density (inferred from Stark broadening measurements of high-n deuterium Balmer lines) suggested that the inner divertor, which is usually detached in discharges without lithium, re-attached. In conclusion, experimental results are compared to simulations obtained with a 1D partially ionized plasma transport model integrated in the non-local thermodynamic equilibrium radiation transport code CRETIN to understand how the reduced recycling affects the divertor parameters in NSTX discharges with lithium coatings.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗