Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Criticality”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 937 records · Page 52

Critical gravities in d ≥ 3

Critical gravities originated in the context of three-dimensional massive gravities. They were conjectured to describe gravitational duals of two-dimensional logarithmic conformal field theories. In this talk, we show that critical gravities can also be studied in dimensions d > 3. As in three dimensions, higher-dimensional critical gravities exhibit logarithmic modes. We argue that the existence of these logarithmic modes leads one to conjecture that higher-dimensional critical gravities are dual to logarithmic conformal field theories in more than two dimensions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Critical Properties in the Ising Model on a Triangular Lattice with the Variable Interlayer Exchange Interaction

Phase transitions and critical and thermodynamic properties of the three-dimensional antiferromagnetic Ising model on a layered triangular lattice with variable interlayer exchange interaction are studied by the replica algorithm of the Monte Carlo method. The studies are carried out for the ratios of the intralayer J{sub 1} and interlayer J{sub 2} exchange interactions in the range of r = J{sub 2}/J{sub 1} = 0.01–1.0. It is established that a second-order phase transition is observed in the considered r interval. Using the finite size scaling theory, the static critical exponents of the heat capacity α, susceptibility γ, order parameter β, correlation radius ν, and Fisher index η are calculated. It is shown that the universality class of the critical behavior of this model is preserved in the interval of 0.05 < r ≤ 1.0. It was found that with a further decrease in the r value, a crossover from the three-dimensional critical behavior to the quasi-two-dimensional one is observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improvement of Off-State Stress Critical Voltage by Using Pt-gated AlGaN/GaN High Electron Mobility Transistors

By replacing the commonly used Ni/Au gate metallization with Pt/Ti/Au, the critical voltage for degradation of AlGaN/GaN High Electron Mobility Transistors (HEMTs) during off-state biasing stress was significantly increased. The typical critical voltage for the HEMTs with Ni/Au gate metallization was around -55V. By sharp contrast, no critical voltage was observed for the HEMTs with Pt/Ti/Au gate metallization, even up -100V, which was the instrumental limitation in this experiment. Both Schottky forward and reverse gate characteristics of the Ni/Au degraded once the gate voltage passed the critical voltage of -55V. There was no degradation exhibited for the HEMTs with Pt/Ti/Au gate metallization.

Lo, C. F.↗

Mixing Driven by Critical Reflection of Near-Inertial Waves over the Texas–Louisiana Shelf

Studies of internal wave-driven mixing in the coastal ocean have been focused on internal tides, while wind-driven near-inertial waves (NIWs) have received less attention in this regard. Here, this study demonstrates a scenario of NIW-driven mixing over the Texas–Louisiana shelf. Supported by a high-resolution simulation over the shelf, the NIWs driven by land–sea breeze radiate downward at a sharp front and enhance the mixing in the bottom boundary layer where the NIWs are focused because of slantwise critical reflection. The criterion for slantwise critical reflection of NIWs is ω=$\sqrt{f{^2}+s^{2}_{bot}N{^2}(1-s_{ρ}/s_{bot})}$ (where ω is the wave frequency, s bot is the bottom slope, and s ρ is the isopycnal slope), under the assumption that the mean flow is in a thermal wind balance and only varies in the slope-normal direction. The mechanism driving the enhanced mixing is explored in an idealized simulation. During slantwise critical reflection, NIWs are amplified with enhanced shear and periodically destratify a bottom boundary layer via differential buoyancy advection, leading to periodically enhanced mixing. Turbulent transport of tracers is also enhanced during slantwise critical reflection of NIWs, which has implications for bottom hypoxia over the Texas–Louisiana shelf.

54 ENVIRONMENTAL SCIENCES↗

Gut microbiome dynamics and associations with mortality in critically ill patients

Abstract Background Critical illness and care within the intensive care unit (ICU) leads to profound changes in the composition of the gut microbiome. The impact of such changes on the patients and their subsequent disease course remains uncertain. We hypothesized that specific changes in the gut microbiome would be more harmful than others, leading to increased mortality in critically ill patients. Methods This was a prospective cohort study of critically ill adults in the ICU. We obtained rectal swabs from 52 patients and assessed the composition the gut microbiome using 16 S rRNA gene sequencing. We followed patients throughout their ICU course and evaluated their mortality rate at 28 days following admission to the ICU. We used selbal, a machine learning method, to identify the balance of microbial taxa most closely associated with 28-day mortality. Results We found that a proportional ratio of four taxa could be used to distinguish patients with a higher risk of mortality from patients with a lower risk of mortality (p = .02). We named this binarized ratio our microbiome mortality index (MMI). Patients with a high MMI had a higher 28-day mortality compared to those with a low MMI (hazard ratio, 2.2, 95% confidence interval 1.1–4.3), and remained significant after adjustment for other ICU mortality predictors, including the presence of the acute respiratory distress syndrome (ARDS) and the Acute Physiology and Chronic Health Evaluation (APACHE II) score (hazard ratio, 2.5, 95% confidence interval 1.4–4.7). High mortality was driven by taxa from theAnaerococcus(genus) andEnterobacteriaceae(family), while lower mortality was driven byParasutterellaandCampylobacter(genera). Conclusions Dysbiosis in the gut of critically ill patients is an independent risk factor for increased mortality at 28 days after adjustment for clinically significant confounders. Gut dysbiosis may represent a potential therapeutic target for future ICU interventions.

Gastroenterology & Hepatology↗

Prediction of Critical Heat Flux in Water-Cooled Plasma Facing Components Using Computational Fluid Dynamics

Several commercial computational fluid dynamics (CFD) codes now have the capability to analyze Eulerian two-phase flow using the Rohsenow nucleate boiling model. Analysis of boiling due to one-sided heating in plasma facing components (pfcs) is now receiving attention during the design of water-cooled first wall panels for ITER that may encounter heat fluxes as high as 5 MW/m2. Empirical thermalhydraulic design correlations developed for long fission reactor channels are not reliable when applied to pfcs because fully developed flow conditions seldom exist. Star-CCM+ is one of the commercial CFD codes that can model two-phase flows. Like others, it implements the RPI model for nucleate boiling, but it also seamlessly transitions to a volume-of-fluid model for film boiling. By benchmarking the results of our 3d models against recent experiments on critical heat flux for both smooth rectangular channels and hypervapotrons, we determined the six unique input parameters that accurately characterize the boiling physics for ITER flow conditions under a wide range of absorbed heat flux. We can now exploit this capability to predict the onset of critical heat flux in these components. In addition, the results clearly illustrate the production and transport of vapor and its effect on heat transfer in pfcs from nucleate boiling through transition to film boiling. This article describes the boiling physics implemented in CCM+ and compares the computational results to the benchmark experiments carried out independently in the United States and Russia. Temperature distributions agreed to within 10 °C for a wide range of heat fluxes from 3 MW/m 2 to 10 MW/m 2 and flow velocities from 1 m/s to 10 m/s in these devices. Although the analysis is incapable of capturing the stochastic nature of critical heat flux (i.e., time and location may depend on a local materials defect or turbulence phenomenon), it is highly reliable in determining the heat flux where boiling instabilities begin to dominate. Beyond this threshold, higher heat fluxes lead to the boiling crisis and eventual burnout. This predictive capability is essential in determining the critical heat flux margin for the design of complex 3d components.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Guide to Performing Computational Analysis of Criticality Accident Alarm Systems

This document provides guidance on performing computational analyses of Criticality Accident Alarm Systems (CAAS). A brief overview of ANSI/ANS-8.3-1997 (R2012), the standard that the United States Department of Energy uses to guide the placement of CAAS detectors, is provided with a focus on the parts of the standard that are most applicable to calculating CAAS detector responses and evaluating CAAS detector coverage. This is followed by a brief discussion of how CAAS detector response calculations differ from eigenvalue calculations that criticality safety practitioners perform regularly. The remainder of the document provides computational examples of how to determine the minimum accident of concern according to ANSI/ANS-8.3-1997 (R2012), how to calculate the response of a CAAS detector due to a specific criticality accident, and how to evaluate the coverage of a CAAS detector for criticality accidents. These practical examples are solved applying SCALE 6.1 and MCNP5, but the methodologies can be applied to other radiation transport codes with similar capabilities, including deterministic codes.

Miller, Thomas Martin↗

Recovery from chemical, biological, and radiological incidents. Critical infrastructure and economic impact considerations

To restore regional lifeline services and economic activity as quickly as possible after a chemical, biological or radiological incident, emergency planners and managers will need to prioritize critical infrastructure across many sectors for restoration. In parallel, state and local governments will need to identify and implement measures to promote reoccupation and economy recovery in the region. This document provides guidance on pre disaster planning for two of the National Disaster Recovery Framework Recovery Support Functions: Infrastructure Systems and Economic Recovery. It identifies key considerations for infrastructure restoration, outlines a process for prioritizing critical infrastructure for restoration, and identifies critical considerations for promoting regional economic recovery following a wide area disaster. Its goal is to equip members of the emergency preparedness community to systematically prioritize critical infrastructure for restoration, and to develop effective economic recovery plans in preparation for a wide area CBR disaster.

61 RADIATION PROTECTION AND DOSIMETRY↗

Criticality Safety Validation of SCALE 6.2.2

The computational bias of criticality safety computer codes must be established through the validation of the codes to critical experiments. A large collection of suitable experiments has been vetted by the International Criticality Safety Benchmark Evaluation Project (ICSBEP) and made available in the International Handbook of Evaluated Criticality Safety Benchmark Experiments (ICSBEP Handbook). More than 600 cases from this handbook ha ve been prepared and reviewed within the Verified, Archived Library of Inputs and Data (VALID) , which is maintained by the Reactor and Nuclear Systems Division at Oak Ridge National Laboratory. The performance of the KENO V.a and KENO-VI Monte Carlo codes within the SCALE 6.2.2 code system is assessed using the VALID models of benchmark experiments. A range of nuclear cross section libraries based on both ENDF/B-VII.1 and ENDF/B-VII.0 in both multigroup (MG) and continuous energy (CE) formats is considered. The TSUNAMI tools for sensitivity and uncertainty analysis are used to examine some systems further to try to identify potential causes of unexpected results.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Critical Experiment Design Phase 2 Report for Integral Request 441

This report documents the second phase of critical experiment design (CED-2) conducted as part of integral experiment request (IER) 441. The purpose of IER-441 is to develop a capability to test the epithermal/intermediate cross sections of materials at the Sandia National Laboratories’ (SNL’s) critical experiment facility using low-enriched uranium oxide fuel. This effort determined that the capability can be achieved using a varying number of test samples in a central test region of a hexagonally pitched lattice driven with a more moderated exterior region. The hollow test region can be changed to either contain a pure aluminum wall or a wall that incorporates a cadmium thermal flux filter. This report documents the development of final anticipated critical configurations using tantalum as the test sample material. Using the anticipated critical configurations, estimates of the experimental uncertainties and sensitivities of materials are performed in keeping with the CEdT process. A list of the new hardware necessary to perform the experiment is included.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A Passive Network Cyber Threat Intelligence Framework for Legacy Critical Control Systems using Machine Learning

The importance of Internet and communication networks in our daily life and in any organization’s daily operations is well known and cannot be overstressed. A nation’s economy is fully reliant on its critical infrastructure. Energy sector is one of the 16 Critical Infrastructure Sectors identified by the Department of Homeland Security. Securing these critical infrastructure sectors is challenging but is also of utmost priority in this day of constant and persistent cyber threats. Threat is any circumstance or event that has the potential to adversely impact an agency's assets and operations. Cyber Threat Intelligence (CTI) is the process of collection, analysis, and identification of potential cyber threats to the organization. This goal of current research performed at the Savannah River National Laboratory (SRNL), Aiken, SC, is to develop a Cyber Threat Intelligence framework for gathering Threat Intelligence passively from the network traffic from and to a real or simulated Critical Control Systems.

97 MATHEMATICS AND COMPUTING↗

Critical Experiment Benchmark Results using MCNP6.2 Unstructured Mesh

The purpose of this report is to document the results of five critical experiment benchmarks modeled using the unstructured mesh (UM) geometry capability in MCNP®1 code, version 6.2. LANL currently has a vast critical experiment benchmark library with over 1100 cases, modeled using constructive solid geometry (CSG) and packaged with Whisper-1.1. Validation efforts for the purposes of nuclear criticality safety typically focus on benchmark libraries built using CSG models. Results of UM geometry models are compared with CSG results and the critical experiment k-effective from the ICSBEP handbook. All computed k-effective results in this study are well within 1% of the experimental result.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Preliminary Analysis of Postclosure DPC Criticality Consequences

One of the objectives of the United States (U.S.) Department of Energy's (DOE) Office of Nuclear Energy's Spent Fuel and Waste Science and Technology Campaign is to better understand the technical basis, risks, and uncertainty associated with the safe and secure disposition of spent nuclear fuel (SNF) and high-level radioactive waste. Commercial nuclear power generation in the U.S. has resulted in thousands of metric tons of SNF, the disposal of which is the responsibility of the DOE (Nuclear Waste Policy Act 1982). Any repository licensed to dispose the SNF must meet requirements regarding the longterm performance of that repository. For an evaluation of the long-term performance of the repository, one of the events that may need to be considered is the SNF achieving a critical configuration. Of particular interest is the potential behavior of SNF in dual-purpose canisters (DPCs), which are currently being used to store and transport SNF but were not designed for permanent geologic disposal. A two-phase study has been initiated to begin examining the potential consequences, with respect to longterm repository performance, of criticality events that might occur during the postclosure period in a hypothetical repository containing DPCs. Phase I, a scoping phase, consisted of developing an approach intended to be a starting point for the development of the modeling tools and techniques that may eventually be required either to exclude criticality from or to include criticality in a performance assessment (PA) as appropriate; Phase I is documented in Price et al. (2019). The Phase I approach guided the analyses and simulations done in Phase II to further the development of these modeling tools and techniques as well as the overall knowledge base. The purpose of this report is to document the results of the analyses conducted during Phase II. The remainder of Section 1 presents the background, objective, and scope of this report, as well as the relevant key assumptions used in the Phase II analyses and simulations. Subsequent sections discuss the analyses that were conducted (Section 2), the results of those analyses (Section 3), and the summary and conclusions (Section 4). This report fulfills the Spent Fuel and Waste Science and Technology Campaign deliverable M2SF-20SN010305061.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Critical point calculations of BSE and SiO 2

Included in this memo are the final values for the BSE and SiO 2 critical points. VASP 5.3.3 was used to calculate the values in each table. Standard methodology is to continue equilibrating the simulation until the block averaged standard deviation is less than 1%. However, due to the simulation sizes in these simulations, the average standard deviation of the BSE pressure is 5% (ranging between 2% and 7%, which is much higher than the usual under 1% considered acceptable) and the SiO 2 pressure is 6% with the lower density error bars being significantly larger than the highest density. The critical point is chosen where the dP/dρ >= 0 for an entire isotherm but is often difficult to distinguish because of the noise along each isotherm. As such, the actual values of the critical points are found by “best guess”. Further computer simulations creating a more pressure values along each isotherm would help but time constraints preclude this. Similarly, the ability to calculate pressures at lower densities that are currently feasible with VASP would also make determination of the critical point easier.

36 MATERIALS SCIENCE↗

Permanent Criticality Termination Processes in Disposed DPCs

This report aims at answering what, how, and when spent nuclear fuel (SNF) or dual-purpose canister (DPC) characteristics could be impacted by disposal events and processes, including decay, corrosion, dissolution, and criticality, such that the potential for criticality initiation or continuation in disposed DPCs becomes permanently significantly diminished. This report uses the term "permanent termination of criticality to denote the significant diminishment of criticality potential, not absolute prevention. The occurrence of disposal processes and events is a direct function of disposal time. For fundamental processes (e.g., decay), time is absolute; however, for other processes (e.g., corrosion), time is relative because it is driven by a combination of DPC characteristics (e.g., fuel conditions, basket composition), geologic parameters (e.g., infiltration rate), engineered barrier design, and other processes and events that impact in-package chemistry.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

National Criticality Experiments Research Center (NCERC) Recent Measurements and Capabilities [Slides]

The National Criticality Experiments Research Center (NCERC) is operated by Los Alamos National Laboratory and has four critical assemblies (Including Godiva, which can be operated above prompt critical). Subcritical measurements are also performed. NCERC is the only general-purpose critical experiments facility in the US and is one of only a few that remain operational throughout the world.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Life-Cycle Inventory of Critical Materials: Nickel, Copper, Titanium, and Rare-Earth Elements

The United States has developed a list of critical minerals/materials whose sustained and reliable supply is pivotal to the robust functioning of critical industrial sectors. A key concern with these minerals is their environmental effects as a function of their production location. This requires material and energy flow details for their processing steps. This report provides a life-cycle inventory (LCI) for producing four critical minerals and/or material systems (nickel, copper, titanium, and rare-earth elements) incorporated in the updated GREET® (Greenhouse gases, Regulated Emissions, and Energy use in Technologies) model. For these systems, we provide an LCI as a function of production location – domestic (within the United States) and international (geographies from where the US imports these minerals). Our LCI also considers variations in ore grades for nickel and copper. This report also provides an LCI for all intermediate materials used to produce these critical materials.

58 GEOSCIENCES↗

Simulations of Water Flow in Relation to a Steady Criticality in an Unsaturated Alluvial Repository

Oak Ridge National Laboratory (ORNL) is examining the conditions under which a criticality event could be ruled out for large packages placed in an unsaturated alluvial repository. This work specifically examines the water level in a stylized waste package that is assumed (1) to fail on the top, and (2) to empty as water is driven away—not by boiling—but by fluid flow phenomena driven by thermal gradients. This analysis uses the PFLOTRAN code package. Specifically, this year’s work includes examination of the heat rate at which water is driven away for various percolation rates using the same assumptions listed in the 2022 annual report. The STANDARDS (formerly UNF-ST&DARDS) package has predicted dual-purpose canister (DPC) neutron multiplication factors (k-effectives) ranging above 1.1 (unitless) with failed components. The DPC designs were not created with the intent to use for disposal purposes. Emplacing such packages may be worth consideration if it can be shown that criticality is either extremely unlikely or of very low consequence to the repository’s safety case. This work aims to help establish hydrologic boundary conditions for a highly hypothetical, highly stylized subsurface criticality event. The approach to critical is assumed to be slow, producing steady heating rates under a few kilowatts. For a DPC containing capillary media, the simulated power required for dry-out was proportional to the percolation rate but was unaffected by the size of a large breech on top of the DPC. Results for single cases with no capillary media in the DPC suggest that higher infiltration rates may be required in those cases to cause flooding. Bounding mechanisms and assumptions must be identified and characterized further by performing additional perturbations to various input parameters to demonstrate robustness of the results. This might be accomplished by examining responses to power pulses to determine the system transfer function required to enable a reduced order feedback model.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗